MSP430F1612IPM - 8MHz 16-Bit Mixed-Signal MCU | Texas Instruments
部品番号: MSP430F1612IPM ✓ 生産中MSP430F1612IPM 概要
An MSP430 microcontroller is a reduced-instruction-set computer designed for embedded control, measurement, and battery-powered applications. The MSP430 architecture combines a 16-bit RISC CPU, 16-bit registers, and constant generators with five low-power operating modes. It belongs to the MCU hierarchy as a mixed-signal microcontroller, combining digital control, data conversion, communications, and direct memory access in one device.
The principal features of the MSP430F1612IPM include its 8 MHz operating clock, 55 KB Flash program memory plus 256 bytes, 5 KB SRAM, and comprehensive peripheral integration. The 12-bit ADC supports analog measurements, while the dual 12-bit DACs provide two independently controlled analog outputs. A comparator supports threshold and signal-conditioning functions, and DMA reduces CPU intervention during data transfers.
The device's 16-bit RISC CPU uses a reduced instruction set to improve code efficiency in control-loop and acquisition systems. Programmable peripherals include I2C, SPI, and UART interfaces, allowing the MCU to connect sensors, external converters, displays, and communications equipment. The integrated DMA controller is especially useful when acquiring or transferring multiple ADC samples while the CPU performs filtering, state-machine updates, or communications.
Typical uses include portable measurement instruments, industrial data-acquisition systems, sensor interfaces, low-power embedded controllers, and mixed-signal instrumentation. Its combination of two DAC channels, a 12-bit ADC, and serial interfaces supports closed-loop measurement systems where analog control and digital data handling must share one controller. The low-power architecture is particularly valuable in portable equipment where duty-cycled operation extends battery life.
PCB design should preserve clean separation between analog and digital circuitry, place decoupling capacitors close to the supply pins, and route high-impedance analog inputs away from switching nodes. Firmware should configure unused pins and peripheral inputs appropriately, exercise the low-power modes only after settling timeouts, and verify ADC and DAC accuracy across the intended reference and temperature ranges.
This page combines the manufacturer's device characteristics with practical selection guidance, pin-compatible replacement information, comparison criteria, and design considerations for engineers evaluating the MSP430F1612IPM in low-power mixed-signal systems.
ドロップイン代替品: MSP430F1612IPM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F1612IPM (同一形状・フットプリント) — 相違点: ADC Resolution, Flash Memory, Package, Comparator, Low-Power Modes.
MSP430F1611IPM
✅ ドロップイン価格はお問い合わせください
データシートを見る →MSP430F1612IPM 最大定格&電気的特性
| Microcontroller Type | 16-bit ultra-low-power mixed-signal microcontroller |
| CPU Architecture | 16-bit RISC MSP430 architecture |
| 最大クロック周波数 | 8 MHz |
| Register Width | 16 bit |
| Flash Memory | 55 KB (55K x 8 + 256 bytes) |
| SRAM | 5 KB |
| ADC Resolution | 12 bit |
| DAC Configuration | Dual 12-bit DAC |
| Analog Comparator | Integrated comparator |
| DMA | Integrated direct memory access controller |
| Serial Interfaces | I2C, SPI, and UART |
| Low-Power Modes | 5 operating modes |
| パッケージ | 64-LQFP (10 x 10 mm) |
| 実装タイプ | Surface mount |
MSP430F1612IPM 64-lqfp (10 x 10 mm) ピン配置ガイド
MSP430F1612IPM (64-lqfp (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F1612IPM.
詳細は データシート をご参照ください。
主な用途
MSP430F1612IPM の用途: 6 件s: Portable Measurement Instruments, Industrial Data Acquisition, Sensor Interface and Conditioning, Precision Control Systems, Low-Power Environmental Monitoring, Connected Embedded Control.
Portable Measurement Instruments
The MSP430F1612IPM fits portable instruments because it combines an 8 MHz 16-bit RISC CPU with a 12-bit ADC, 5 KB of SRAM, and five low-power modes in one 64-LQFP device. The MCU can acquire sensor data, process results, and control a display while spending much of its operating time in a reduced-power state. Its 55 KB of Flash provides room for calibration tables, control routines, and communication firmware. In a handheld meter, the dual DAC channels can generate excitation or reference signals, while I2C, SPI, and UART support sensors, memory, and host connectivity.
Industrial Data Acquisition
The MSP430F1612IPM is suitable for compact industrial data-acquisition modules because its 12-bit ADC, comparator, and DMA resources can process analog channels while the CPU handles configuration and communications. DMA reduces processor involvement during repeated transfers, and the 8 MHz CPU provides sufficient throughput for filtering, scaling, and status monitoring. The three listed serial interfaces allow local sensors, external converters, and supervisory equipment to share the controller. Because the package is a 10 x 10 mm 64-LQFP, the device also supports compact panel-mounted or distributed acquisition hardware without requiring a large processor footprint.
Sensor Interface and Conditioning
The MSP430F1612IPM can act as the central controller for a mixed-signal sensor interface by combining analog measurement with digital conditioning in one microcontroller. The 12-bit ADC reads sensor outputs, the comparator handles threshold events, and the dual 12-bit DACs can produce control or excitation voltages. The 16-bit RISC CPU is well suited to proportional, integral, derivative, calibration, and filtering operations, while DMA supports efficient buffer movement. Its I2C and SPI interfaces allow expansion when the application exceeds the integrated converter resources. Firmware should calibrate the ADC and DAC channels and account for reference-voltage tolerance during measurement accuracy validation.
Precision Control Systems
The MSP430F1612IPM supports compact closed-loop control where an analog output must be coordinated with digital sensor feedback. The dual 12-bit DACs can drive control or reference signals, while the comparator can perform fast threshold detection around a controlled operating point. The 8 MHz 16-bit CPU executes control calculations efficiently, and 5 KB of SRAM accommodates working state and data buffers. I2C, SPI, and UART provide links to power stages, actuators, or supervisory controllers. Designers should confirm loop timing and DAC settling requirements in the application, especially where deterministic update timing is more important than low standby power.
Low-Power Environmental Monitoring
The MSP430F1612IPM is appropriate for battery-operated environmental monitoring when periodic measurement, local processing, and low standby consumption are required. Its 12-bit ADC supports analog sensing, its 5 KB of SRAM can hold recent samples and processing state, and its 55 KB of Flash supports firmware, calibration coefficients, and event logic. Five low-power operating modes permit duty-cycled operation, while UART or SPI can report readings to a local host or remote radio. DMA can improve acquisition efficiency, and the comparator may detect threshold crossings. Firmware should use the datasheet-defined timing and I/O retention conditions when entering low-power states.
Connected Embedded Control
The MSP430F1612IPM can serve as a compact controller in connected equipment requiring local mixed-signal processing rather than only data relay. Its I2C, SPI, and UART interfaces support sensors, external memory, actuators, and service ports, while the ADC and dual DACs handle local analog functions. The 8 MHz CPU and 16-bit registers support efficient state-machine and control code, and DMA helps maintain transfer throughput. Five low-power modes make the architecture useful in periodically connected equipment. Developers should define a deliberate peripheral shutdown and wakeup strategy to avoid leaving unused interfaces active and consuming additional standby energy.
エンジニアリング参考データ: MSP430F1612IPM — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MSP430F1611IPM |
|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | Texas Instruments | Texas Instruments |
| Flash Memory | 55 KB (55K x 8 + 256 bytes) | 48 KB |
| Product Class | 16-bit ultra-low-power mixed-signal microcontroller | MSP430F16xx family microcontroller |
主な差別化要因
- Larger Flash memory within the same identified 64-LQFP family footprint (vs MSP430F1611IPM)
- Two integrated 12-bit DAC channels support analog output and control (vs MSP430F1611IPM)
- Integrated DMA supports efficient mixed-signal data movement (vs MSP430F1611IPM)
設計ノート
Follow the manufacturer pin-configuration guidance when placing supply decoupling and analog components. Keep the device's required bypass capacitors close to their corresponding supply and ground pins, use short ground returns, and separate sensitive analog routing from high-speed digital signals. The 64-LQFP footprint has fine-pitch leads, so verify land-pattern dimensions, solder-mask clearance, and assembly tolerances against the current package drawing before PCB release.
Treat the ADC inputs and DAC outputs as precision analog nets even though they are integrated on the MCU. Route them away from switching-regulator nodes, high-current LED paths, and clocks. Connect analog and digital ground systems according to the manufacturer recommendations, maintain a quiet reference return for the converter section, and avoid placing test-point stubs directly on sensitive nodes where they can increase capacitance and degrade transient response.
The five low-power modes can reduce energy consumption only if the firmware shuts down unused peripherals and controls wakeup timing correctly. Review the manufacturer's clock-startup, I/O-state, and retention requirements before entering a deep low-power state. External pull resistors may be required to prevent signal drift during sleep, particularly on communications lines or externally controlled analog nodes.
Do not treat the MSP430F1611IPM as an automatic firmware-identical replacement for the MSP430F1612IPM. Its Flash capacity is 48 KB rather than 55 KB, so image size, bootloader assumptions, vector-table placement, and update mechanisms must be checked. Also verify every ADC, DAC, comparator, DMA, I2C, SPI, and UART assignment before substitution, because a matching package does not establish identical peripheral behavior.
コンプライアンス情報
The available product information does not state the device's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these details using the manufacturer's current product documentation and material declarations.