P1014NXN5FFA - QorIQ P1 800MHz e500v2 MPU, 425-TEPBGA | NXP
MPN: P1014NXN5FFA ✓ فعالP1014NXN5FFA جائزہ
A microprocessor (MPU) is an integrated circuit that contains the central processing unit (CPU) of an embedded system. In the hierarchy of computing silicon, an MPU sits between microcontrollers (MCUs with on-chip flash and peripherals) and full application processors (APs used in handsets and tablets). QorIQ communications processors target the industrial-networking and edge-router tier where deterministic packet processing, hardware crypto, and multi-protocol I/O are required without the cost of a high-end multicore SoC.
Key features of the P1014NXN5FFA include a 32-bit Power Architecture core with dual-issue out-of-order execution, integrated SEC 4.4 security engine for IPSec/SSL/TLS acceleration, two 10/100/1000 Mb/s Ethernet MACs with QoS and virtualization support, two USB 2.0 ports (one host, one OTG), two SATA 2.0 ports, three PCIe Gen 2.0 controllers, and a 64-bit DDR3 memory controller up to 800 MT/s. The industrial-grade 'N' temperature rating extends the operating range to -40C to +105C, suiting outdoor and factory-floor deployments.
The architecture combines a coherent core complex with a high-bandwidth interconnect fabric and a peripheral block complex. The e500v2 core includes hardware virtualization (hypervisor-aware), dual 32 KB L1 caches, a 256 KB unified L2 cache with ECC, and a 32-bit DDR controller with ECC for high-reliability operation. Hardware crypto offloads free the core for protocol processing, while the packet-processing engine accelerates classification and queue management.
Typical applications include industrial Ethernet switches, IEC 61850-3 substation networking equipment, smart-grid gateways, factory automation controllers, networked printers, entry-level branch routers, and industrial IoT gateways that need deterministic networking, hardware security, and industrial temperature tolerance in a single chip. The compact 19x19 mm TEPBGA package also enables dense PCB layouts for line-card designs.
When designing with this part, ensure the PCB has a minimum 6-layer stack-up with dedicated ground and power planes to handle the 800 MT/s DDR3 interface. The TEPBGA requires precise via-in-pad or microvia construction; improper escape routing will compromise DDR3 signal integrity. Reference the NXP hardware reference manual for SerDes reference-clock jitter and PCIe Gen 2 transmitter pre-emphasis settings.
This page synthesizes distributor pricing, drop-in alternatives within the QorIQ P1 family, and practical design notes not found in the manufacturer datasheet, giving embedded engineers a fast path from MPN to BOM.
کے لیے ڈراپ اِن متبادل P1014NXN5FFA — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں P1014NXN5FFA (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature, RoHS Status, USB, Core Architecture, Ethernet.
P1014NSE5FFA
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →P1010NXN5FFA
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P1014NXE5FFB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
P1014NSN5FFB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATSAMA5D31A-CU
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →P1014NXN5FFA زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Processor Type | PowerPC e500v2 |
| Core Count | 1 |
| ڈیٹا بس چوڑائی | 32-bit |
| Maximum Core Frequency | 800 MHz |
| Process Technology | 45 nm |
| پیکیج | 425-TEPBGA (19x19 mm) |
| Pin/Ball Count | 425 |
| Terminal Pitch | 0.8 mm |
| آپریٹنگ درجہ حرارت | -40C to +105C (Industrial) |
| Memory Controller | DDR3, 64-bit, up to 800 MT/s, ECC |
| L2 Cache | 256 KB unified |
| Ethernet | 2x 10/100/1000 Mb/s (SGMII/RGMII) |
| USB | 2x USB 2.0 (1 host, 1 OTG) |
| SATA | 2x SATA 2.0 |
| PCIe | 3x PCIe Gen 2.0 controllers |
| Security Engine | SEC 4.4 (IPSec/SSL/TLS) |
| RoHS اسٹیٹس | Compliant |
| Lead Free | Yes |
P1014NXN5FFA پن کنفیگریشن
| پن A1 | VSS — Ground reference |
| پن T22 | VDD_CORE — Core supply voltage (1.0 V typ.) |
| پن B10 | DDR_DQ0 — DDR3 data lane 0 |
| پن F15 | PCIe1_TX_P — PCIe Gen 2 lane 1 transmit + |
| پن L5 | SGMII1_TX_P — GbE SGMII 1 transmit + |
| پن M12 | SATA0_TX_P — SATA port 0 transmit + |
| پن P7 | USB1_DP — USB 2.0 port 1 D+ |
| پن C18 | JTAG_TCK — JTAG test clock |
عام استعمالات
P1014NXN5FFA کے لیے موزوں ہے 7 ایپلیکیشنs: Industrial Ethernet Switches, IEC 61850-3 Substation Networking Equipment, Factory Automation Controllers, Networked Printers and MFPs, Entry-Level Branch Routers, Industrial IoT Gateways, Smart Grid Communication Nodes.
Industrial Ethernet Switches
The P1014NXN5FFA is purpose-built for managed industrial Ethernet switches. Its two integrated 10/100/1000 Mb/s MACs (SGMII/RGMII) with QoS and VLAN tagging enable wire-speed switching at the access layer, while the e500v2 core runs Layer 2/3 stacks (uClinux, VxWorks) with full hardware virtualization. The hardware SEC 4.4 engine accelerates MACsec for IEC 62443 secure networks. The 19x19 mm TEPBGA footprint suits compact DIN-rail switch designs, and the -40C to +105C industrial temperature rating covers outdoor cabinet and substation deployments.
تجویز کردہ
IEC 61850-3 Substation Networking Equipment
For substation and smart-grid deployments, the P1014NXN5FFA provides the deterministic processing power required by IEC 61851-3 and IEC 61850 protocols. The 800 MHz e500v2 core combined with the SEC 4.4 engine handles GOOSE message processing, SV (Sampled Values) timestamping, and IEC 62351-3 encryption at line rate. The 64-bit DDR3 controller with ECC protects critical protection-relay data, while the industrial -40C to +105C rating is mandatory for substation cabinets that lack climate control.
تجویز کردہ
Factory Automation Controllers
The P1014NXN5FFA powers factory-floor PLCs and motion controllers that need deterministic networking plus a real-time OS. The PCIe Gen 2 controllers accept EtherCAT master cards, while the dual GbE ports run PROFINET RT or EtherNet/IP with hardware-accelerated QoS. The integrated SEC 4.4 engine secures machine-to-machine traffic, and the 19x19 mm BGA allows compact controller boards that fit standard DIN-rail enclosures. The industrial temperature grade handles ambient heat inside cabinet enclosures.
تجویز کردہ
Networked Printers and MFPs
The P1014NXN5FFA is well-suited for high-end networked printers and multifunction peripherals that need printer-language interpretation plus gigabit networking. The 800 MHz e500v2 core decodes PCL/PostScript/PDF streams efficiently, while the dual GbE MACs handle full-duplex print-server traffic without bottlenecking. The SATA port connects local HDD for job spooling, and USB 2.0 ports handle direct-print jobs from USB sticks. Compact BGA package enables the small mainboard footprint required by thin printer designs.
تجویز کردہ
Entry-Level Branch Routers
The P1014NXN5FFA serves as the main CPU in entry-level branch-office routers and SD-WAN edge devices. Its 800 MHz e500v2 core handles BGP/OSPF routing tables and IPSec VPN tunnels, while the hardware SEC 4.4 engine encrypts site-to-site tunnels at line rate without software CPU overhead. Three PCIe lanes accept cellular 5G modem cards, Wi-Fi 6 cards, or additional Ethernet ports. The DDR3 controller supports up to 4 GB of memory for routing-table storage.
تجویز کردہ
Industrial IoT Gateways
The P1014NXN5FFA is an ideal CPU for industrial IoT gateways that aggregate sensor data and forward it to cloud servers. The dual GbE ports daisy-chain industrial sensors, the PCIe lane accepts LoRaWAN or cellular modems, and the SEC 4.4 engine secures TLS 1.3 handshakes for MQTT/HTTPS uplink. The industrial -40C to +105C rating and ECC-protected DDR3 controller support long-life deployments in factories and outdoor installations. NXP's Linux BSP and security SDK reduce time-to-market for gateway OEMs.
تجویز کردہ
Smart Grid Communication Nodes
For smart-grid distribution automation and AMI (Advanced Metering Infrastructure) concentrators, the P1014NXN5FFA delivers the throughput and crypto needed for DLMS/COSEM metering traffic. The e500v2 core runs metering aggregation stacks, the SEC 4.4 engine accelerates encrypted AMI traffic, and the 64-bit DDR3 interface buffers large meter-reading batches. The industrial temperature grade is mandatory for outdoor meter concentrators installed in cabinet enclosures exposed to direct sunlight and winter conditions.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا P1014NXN5FFA — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | P1014NSE5FFA | P1010NXN5FFA | P1014NXE5FFB | P1014NSN5FFB | ATSAMA5D31A-CU |
|---|---|---|---|---|---|---|
| Package | 425-TEPBGA (19x19 mm) | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 425-TEPBGA (19x19 mm) - same | 324-LFBGA - different package |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | Microchip Technology |
| Core | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | PowerPC e500v2 (1 core) | ARM Cortex-A5 (1 core) |
| Max Core Frequency | 800 MHz | 800 MHz | 667 MHz | 800 MHz | 800 MHz | 536 MHz |
| SATA Ports | 2 | 2 | 1 | 2 | 2 | 0 |
| PCIe Controllers | 3 (Gen 2.0) | 3 (Gen 2.0) | 2 (Gen 2.0) | 3 (Gen 2.0) | 3 (Gen 2.0) | 0 |
| Security Engine | SEC 4.4 | SEC 4.4 | SEC 4.4 | SEC 4.4 | SEC 4.4 | No hardware crypto (software only) |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +85C |
اہم امتیازی خصوصیات
- Hardware SEC 4.4 crypto engine with line-rate IPSec/TLS acceleration (بمقابلہATSAMA5D31A-CU)
- Industrial -40C to +105C operating range (بمقابلہATSAMA5D31A-CU)
- Three PCIe Gen 2 controllers for expansion flexibility (بمقابلہP1010NXN5FFA)
- 800 MHz e500v2 core with 256 KB L2 cache (بمقابلہP1014NSE5FFA)
ڈیزائن نوٹس
The 425-TEPBGA at 0.8 mm pitch requires a minimum 6-layer PCB stack-up with HDI microvia construction. Place ground planes directly under the BGA, and use laser-drilled microvias in-pad to escape the center balls. Use the NXP-provided layout checklist in the P1014 hardware reference manual to verify length-matched DDR3 traces; target a Z0 of 50 ohms +/-10% with 100-ohm differential for PCIe/SGMII/SATA pairs. Estimated: a 4-layer stack will likely fail DDR3-800 compliance testing.
The P1014NXN5FFA dissipates approximately 2.5-3.5 W typical at 800 MHz with all peripherals active, and up to 5 W at Tj max. With a TEPBGA junction-to-ambient theta_JA in the 20-25 C/W range (with proper copper spreader), design the enclosure for 35 C/W maximum case-to-ambient. For sealed outdoor enclosures, use a thermal pad bonded to an aluminum chassis for heat spreading. Estimated: at 3.5 W dissipation and 20 C/W theta_JA, junction-to-ambient rise is 70 C, leaving limited margin above 105C Tj.
Do not attempt to use the P1014NXN5FFA without populating the SEC engine firmware - the boot ROM looks for a valid image in NOR flash or SD/eMMC before allowing network boot. Inadequate SerDes reference-clock jitter (>100 ps RMS) will fail PCIe Gen 2 compliance; use a high-quality crystal or oscillator. Always strap the cfg_rcw_src pins correctly before POR - a wrong RCW configuration can lock the SoC without a visible error.
DDR3 signals require write-leveling and gate-training calibrations. Run the DDR controller at 800 MT/s only after verifying SI on a long trace length sample; many designs drop to 667 MT/s for margin. PCIe transmit de-emphasis and pre-emphasis must be tuned per channel using the SERDES configuration registers; starting values from the reference manual often need optimization. Estimated: keepout distance from DDR3 to high-speed serial pairs should be 4x the dielectric thickness.
تعمیل کی معلومات
RoHS compliant per NXP product page; lead-free confirmed. AEC-Q100 not applicable (this is an MPU, not an automotive-grade IC). Halogen-free status not confirmed in provided data.
