Broadcom

PEX8604-BA50BI - 4-Lane Gen 2 PCIe Switch | Broadcom

MPN: PEX8604-BA50BI ✓ فعال
0.95 V to 1.05 V Vdss 196-BGA (15 mm x 15 mm) Package
MOQ: 1 |

PEX8604-BA50BI جائزہ

The Broadcom PEX8604-BA50BI is a PCI Express switch integrated circuit built around the ExpressLane PEX8604 architecture. It provides four PCI Express Gen 2 lanes operating at 5.0 GT/s and supports up to four downstream ports in a 196-BGA package measuring 15 mm by 15 mm. The device conforms to revision 2.0 of the PCI Express Base Specification. This combination makes it a compact PCIe routing solution for systems that need to connect multiple PCI Express endpoints to a host interface.

A PCI Express switch is a semiconductor that creates additional PCIe links between a root complex or another switch and multiple endpoint devices. It operates within the PCIe hierarchy as a bridge and switch rather than as an endpoint itself. The PEX8604 belongs to the broad PCIe switch and bridge category, which supports fan-out, embedded systems, consumer equipment, and high-availability platforms where downstream devices must communicate with a central host.

The principal device characteristics are four Gen 2 lanes, a maximum of four ports, and a 5.0 GT/s per-lane signaling rate. Broadcom describes the PEX8604 as its smallest four-lane Gen 2 device. The switch also supports PCIe hot-plug functionality for supported downstream configurations, making it relevant to systems where expansion modules are replaced or maintained without powering down the complete platform.

The 196-BGA package provides a high pin count for power, ground, high-speed transmit and receive paths, configuration interfaces, reference clocks, and control signals. Such a package also places substantial emphasis on compact board area. Achieving correct Gen 2 operation therefore requires careful PCB layer planning, controlled impedance routing, uninterrupted reference planes, and power-delivery design that meets the device's low- and high-speed requirements.

Typical uses include embedded computing platforms, consumer appliances, PCI Express endpoint aggregation, expansion systems, and high-availability equipment with hot-pluggable modules. In these systems, the switch expands one host-facing PCIe connection into multiple downstream links while allowing port-level routing and monitoring functions according to the device configuration.

A primary design consideration is signal integrity. The 5.0 GT/s interface requires short, impedance-controlled routes, solid reference planes, suitable via transitions, and connector or package escape geometry designed for low loss. Power sequencing, clock distribution, reset behavior, and the firmware-supported link configuration must also be validated together; satisfying individual data-sheet limits in isolation does not guarantee stable operation across every board stack-up and temperature condition.

This product overview synthesizes the manufacturer capabilities, package information, cross-reference findings, and practical implementation considerations into an engineering-focused guide. It also distinguishes documented characteristics from parameters that still require confirmation from the full technical documentation before a new board design is released.

کے لیے ڈراپ اِن متبادل PEX8604-BA50BI — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

PEX8604-BA50BI G

✅ ڈراپ-اِن
📦 196-BGA (15 mm x 15 mm)
Ordering suffix is space-separated as BI G rather than BI; the listed lane count, port count, and 196-BGA package remain 4 lanes, 4 ports, and 196-BGA, giving 0% change in those key parameters.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PEX8604-BA50BC

✅ ڈراپ-اِن
Broadcom
📦 196-BGA (15 mm x 15 mm)
PCI Express switch IC · Gen 2 · 4 lanes · 4 ports · 5.0 GT/s · Revision 2.0 · 196-BGA · 15 mm x 15 mm

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PEX8604-BA50BI زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type PCI Express switch IC
PCI Express Generation Gen 2
PCI Express Lane Count 4 lanes
Maximum Port Count 4 ports
Per-Lane Data Rate 5.0 GT/s
PCI Express Base Specification Revision 2.0
پیکیج 196-BGA (15 mm x 15 mm)
Ball Count 196 balls
Core Operating Voltage 0.95 V to 1.05 V
Hot-Plug Support Supported for applicable downstream-port configurations
Device Classification Analog Switches - Special Purpose / PCI Interface IC
Signal Standard PCI Express
Interface Direction Host-facing to multiple downstream endpoint ports
ماؤنٹنگ ٹائپ Surface mount

PEX8604-BA50BI 196-bga (15 mm x 15 mm) پن کنفیگریشن گائیڈ

PEX8604-BA50BI (196-bga (15 mm x 15 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

PEX8604-BA50BI کے لیے 196-bga (15 mm x 15 mm) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PEX8604-BA50BI.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

PEX8604-BA50BI کے لیے موزوں ہے 6 ایپلیکیشنs: Embedded PCIe Endpoint Aggregation, Consumer Multi-Device Expansion, High-Availability PCIe Expansion, PCIe Storage Controller Hub, PCIe Network Interface Aggregation, PCIe Test and Measurement Platform.

🖥️

Embedded PCIe Endpoint Aggregation

The Broadcom PEX8604-BA50BI fits embedded platforms that need several PCIe devices behind one host-facing interface. Four Gen 2 lanes at 5.0 GT/s provide up to four downstream paths for compatible endpoint controllers, allowing storage, networking, or acceleration functions to share a compact platform architecture. The 196-BGA package measures 15 mm by 15 mm, but the design must reserve escape routing, reference planes, clock distribution, and power connections around all 196 balls. Firmware must configure the intended port relationships and validate enumeration, reset behavior, and endpoint capabilities before production deployment.

📱

Consumer Multi-Device Expansion

The PEX8604-BA50BI is appropriate for consumer equipment that needs to expose multiple PCI Express functions without implementing a larger or more complex switch. Broadcom identifies consumer applications as a target for the device, and its four-lane Gen 2 architecture can support several compatible endpoints through up to four downstream ports. System partitioning, device assignment, and power states must be handled by the platform firmware. For compact products, the 15 mm by 15 mm BGA saves board area relative to larger switch packages, although careful escape routing and assembly control remain necessary.

🔧

High-Availability PCIe Expansion

The Broadcom PEX8604-BA50BI supports hot-plug capability in applicable configurations where downstream ports connect to PCI Express slots, making it useful in high-availability systems that support field replacement of modules. The four downstream ports and 5.0 GT/s Gen 2 signaling can organize multiple serviceable PCIe functions behind a common host connection. Deployment requires deliberate implementation of connector power management, reset behavior, software presence detection, and fault isolation. Hot-plug support should be validated for the selected board and enclosure because the physical connection alone does not establish complete operational readiness.

🖥️

PCIe Storage Controller Hub

A PEX8604-based design can connect multiple compatible PCIe storage controllers through the PEX8604-BA50BI's four-lane Gen 2 fabric. The switch presents one host-facing connection while providing up to four downstream endpoint paths, simplifying topology management in compact servers and edge appliances. Performance depends on correct lane allocation, buffer behavior, and device support for the switch's operating modes, so storage devices should be tested with the intended firmware image. PCB implementation must preserve the required return path and power-delivery performance through each high-speed lane.

🌐

PCIe Network Interface Aggregation

The PEX8604-BA50BI can fan multiple PCIe-based network interfaces into a single system architecture for edge servers, industrial controllers, and communication appliances. Four Gen 2 lanes at 5.0 GT/s support concurrent endpoint traffic when the switch configuration and attached devices allow it. Thermal and firmware planning should account for the activity of several network controllers sharing the chassis. Signal-integrity validation must cover connector escapes, layer transitions, reference-plane continuity, and clock jitter at every downstream port rather than relying only on schematic connectivity.

📺

PCIe Test and Measurement Platform

The Broadcom PEX8604-BA50BI can support test and measurement systems requiring several compatible PCIe instruments, acquisition engines, or programmable controllers behind one host interface. Its four downstream ports offer a compact way to organize multiple PCIe functions while limiting the physical size of the switching component. For instrumentation, deterministic enumeration, stable reference-clock behavior, and controlled reset sequencing are as important as raw lane bandwidth. The platform should be tested across expected temperature, power, and loading conditions to confirm that each connected endpoint remains stable through the selected link configuration.

تجویز کردہ پروڈکٹس کا خلاصہ

PEX8604-BA50BI G Listed ordering designation of the same PCIe switch family استعمال ہوتا ہے: Embedded PCIe Endpoint Aggregation, Consumer Multi-Device Expansion, High-Availability PCIe Expansion, PCIe Storage Controller Hub, PCIe Network Interface Aggregation, PCIe Test and Measurement Platform PEX8604-BA50BC Broadcom استعمال ہوتا ہے: Embedded PCIe Endpoint Aggregation, Consumer Multi-Device Expansion, High-Availability PCIe Expansion, PCIe Storage Controller Hub, PCIe Network Interface Aggregation, PCIe Test and Measurement Platform
What is the Broadcom PEX8604-BA50BI?
The Broadcom PEX8604-BA50BI is a four-lane, four-port PCI Express Gen 2 switch IC in a 196-BGA package. According to Broadcom's PEX8604 product information, it operates at 5.0 GT/s per lane and conforms to revision 2.0 of the PCI Express Base Specification. Its primary function is to fan a host-facing PCIe connection out to multiple downstream endpoints in compact embedded, consumer, and high-availability systems.
How many PCI Express lanes and ports does the PEX8604-BA50BI provide?
The PEX8604-BA50BI provides four PCI Express lanes and supports up to four ports. Broadcom identifies the part as a Gen 2 PCIe switch with a per-lane rate of 5.0 GT/s. The four-lane architecture provides aggregate host-side bandwidth of 20.0 GT/s before protocol overhead, while the port count allows multiple downstream PCIe endpoint connections to be integrated behind the switch.
What package does the PEX8604-BA50BI use?
The PEX8604-BA50BI uses a 196-BGA package measuring 15 mm by 15 mm. Distributor product records identify the 196-ball package and the four-channel PCI Express switch configuration. Because this is a high-pin-count BGA device, production boards require a compatible PCB design, appropriate escape routing, via-in-pad or via-adjacent land patterns where applicable, and assembly-process control for the full ball array.
Where can I download the PEX8604-BA50BI datasheet?
The official PEX8604 documentation is available through Broadcom's PEX8604 product page and the linked ExpressLane technical documents. The product page identifies the device as a four-lane Gen 2 PCIe switch, while the feature document describes hot-plug capability. Before committing to a PCB, obtain the complete PEX8604 data sheet, reference design, and hardware design guide from Broadcom because the public product summary does not expose the complete ball map.
Where is the PEX8604-BA50BI pinout located?
The complete PEX8604-BA50BI pin and ball assignment is located in the manufacturer's package pinout table and ball-layout drawing rather than in the distributor catalog summary. Use the Broadcom PEX8604 technical documentation to identify supply, ground, clock, reset, configuration, and differential PCIe lane assignments. Do not derive the 196-ball layout from the general device description because individual signal assignments are not stated there.
What applications are suitable for the PEX8604-BA50BI?
The PEX8604-BA50BI is suitable for embedded and consumer systems that need multiple PCI Express endpoints behind one host-facing interface. Broadcom specifically identifies consumer and embedded applications and describes the device as a compact four-lane Gen 2 switch. It is also relevant to high-availability systems where supported downstream slots require hot-plug capability, although each use case still needs firmware, thermal, and signal-integrity validation.
What are the key specifications of PEX8604-BA50BI that engineers should know?
The essential PEX8604-BA50BI specifications are four PCIe Gen 2 lanes, up to four downstream ports, 5.0 GT/s signaling per lane, compliance with PCI Express Base Specification revision 2.0, and a 196-BGA package measuring 15 mm by 15 mm. A distributor record also identifies a 0.95 V to 1.05 V operating range. These details define the device as a compact, non-retimer PCIe fan-out switch for endpoint aggregation.
How does the PEX8604-BA50BI differ from a PCI Express endpoint?
The PEX8604-BA50BI is a PCIe switch, whereas an endpoint terminates a PCIe link with a device-specific function. The switch creates multiple downstream paths from an upstream host or switch and routes traffic among PCIe links. This makes the PEX8604 appropriate for connecting storage controllers, network devices, capture cards, or other PCIe endpoint functions, but it does not replace the endpoint controller inside those devices.
Does the PEX8604-BA50BI support hot-plug functionality?
Yes, Broadcom documents hot-plug capability for the PEX8604 when applicable downstream ports connect to PCI Express slots. The feature can support maintenance and hardware replacement in high-availability applications. A system design must still configure the relevant port controller correctly and implement the required power, reset, software, and connector behavior before a hot-plug operation can be considered production-ready.
Is the PEX8604-BA50BI suitable for embedded systems?
The PEX8604-BA50BI is explicitly associated by Broadcom with embedded and consumer applications. Its four Gen 2 lanes and support for up to four ports allow a compact embedded platform to fan out multiple PCIe links. Suitability depends on board area, thermal conditions, endpoint count, firmware support, and the ability of the PCB stack-up to preserve signal integrity at 5.0 GT/s.
What is the best drop-in replacement for PEX8604-BA50BI?
No independently verified cross-manufacturer drop-in replacement is established for the PEX8604-BA50BI. The closest identified ordering variants are Broadcom PEX8604-BA50BI G and PEX8604-BA50BC, but exact pin compatibility, electrical limits, and lifecycle status must be confirmed in the manufacturer documentation before substitution. A device with the same BGA outline is not automatically a drop-in replacement.
What can replace the PEX8604-BA50BI?
The PEX8604-BA50BI G ordering designation is the most direct identified replacement because it represents the same PEX8604 four-lane Gen 2 device. The PEX8604-BA50BC is another PEX8604-family ordering variant, although its ordering-code differences must be checked against the official data sheet. No cross-brand substitute should be treated as drop-in without evidence of matching pins, power rails, clocks, and configuration behavior.
Is PEX8604-BA50BI-G the same as PEX8604-BA50BI?
PEX8604-BA50BI-G is a listed ordering designation for the Broadcom PEX8604 four-lane Gen 2 switch and appears to represent the same core device under a space-separated suffix format. Buyers should confirm the ordering-information table to determine whether the trailing G denotes a lead-free or ordering-code convention. It is not appropriate to infer every lifecycle or compliance attribute from the distributor title alone.
When should I choose the PEX8604-BA50BI instead of a larger PCIe switch?
Choose the PEX8604-BA50BI when the design needs up to four downstream PCIe Gen 2 connections and can use four lanes at 5.0 GT/s. A larger switch may be preferable when more ports, higher generation, broader configuration features, or additional non-Power state-management functionality are required. The smaller switch can reduce board area when its four-lane limit and thermal footprint fit the endpoint plan.
How do I compare PEX8604-BA50BI and PEX8606-BA50BI-G?
The PEX8604-BA50BI is a four-lane Gen 2 switch, whereas the PEX8606 family name indicates a six-lane device, but the available listing does not establish identical pin assignments or package compatibility. It should therefore be treated as a functional comparison, not a drop-in substitute. Review lane count, port configuration, package ballout, power rails, clocking, firmware support, and signal-integrity requirements before selecting between them.
Where can I buy PEX8604-BA50BI and check its price and lead time?
Use the Request a Quote form on this page to request the current PEX8604-BA50BI price, stock position, and lead time. The live commercial terms can vary with package code, volume, and inventory status, so a quote request is more reliable than static pricing. Include your target quantity, shipment destination, and required date with the request.

کے لیے انجینئرنگ ریفرنس ڈیٹا PEX8604-BA50BI — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the PEX8604-BA50BI when a compact system needs to fan out up to four PCI Express Gen 2 endpoints at 5.0 GT/s and can accommodate the 196-BGA implementation. It is particularly suitable for embedded, consumer, and high-availability platforms where multiple PCIe functions must share a host interface. Select PEX8604-BA50BI G when that space-separated ordering designation matches the manufacturer's ordering table and approved procurement configuration. Consider PEX8604-BA50BC only after confirming the BA50BC ordering details against the complete data sheet. Do not choose PEX8606-BA50BI-G as a drop-in replacement solely from its similar package family; it represents a six-lane device, and lane, pin, firmware, and feature compatibility must be demonstrated. For designs requiring newer PCIe generations, more ports, or features outside the PEX8604 specification, evaluate a larger switch rather than forcing this four-lane device into an unsuitable topology.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ PEX8604-BA50BI G PEX8604-BA50BC
Brand Broadcom Broadcom Broadcom
Package 196-BGA (15 mm x 15 mm) 196-BGA (15 mm x 15 mm) 196-BGA (15 mm x 15 mm)
PCI Express Generation Gen 2 Gen 2 Gen 2
Lane Count 4 lanes 4 lanes 4 lanes
Maximum Port Count 4 ports 4 ports 4 ports
Per-Lane Data Rate 5.0 GT/s 5.0 GT/s 5.0 GT/s
Ordering Designation PEX8604-BA50BI PEX8604-BA50BI G PEX8604-BA50BC

اہم امتیازی خصوصیات

  • Compact four-lane fan-out in a 196-BGA package (بمقابلہPEX8606-BA50BI-G)
  • Direct space-separated ordering designation (بمقابلہPEX8604-BA50BC)
  • Broad application support within the Gen 2 PCIe portfolio (بمقابلہPEX8606-BA50BI-G)

ڈیزائن نوٹس

Treat the four Gen 2 lanes as 5.0 GT/s differential channels and validate the complete board stack-up rather than only the device footprint. Preserve continuous reference planes beneath each high-speed route, minimize layer transitions, control impedance according to the Broadcom design guide, and verify connector or package escapes with the intended board material. After layout, run signal-integrity simulation and hardware eye measurements across voltage and temperature corners.

Decouple each supply rail at the device with the capacitance and placement required by the manufacturer guidance, and provide low-impedance planes for the 196-BGA power and ground balls. Validate startup sequencing, steady-state droop, and current transients caused by PCIe link activity. Do not infer permissible rail combinations or capacitor values from the 0.95 V to 1.05 V operating range; obtain the complete power architecture from the technical documentation.

Reserve the complete 196-ball escape area before committing the PCB outline. Check component clearance around the BGA, select an assembly process compatible with its pitch and ball layout, and provide inspection access if the package has hidden or closely spaced balls. Keep clock distribution and reset routing isolated from noisy switching nodes, and avoid routing unrelated high-speed signals through the PCIe lane escape region.

Do not substitute a switch solely because its BGA outline appears similar. Confirm the complete ball map, supply rails, reference-clock requirements, configuration interface, reset polarity, lane assignments, firmware support, and ordering code. This is especially important for PEX8604 ordering variants and for the PEX8606 comparison candidate, because functional PCIe compatibility does not automatically establish pin-to-pin drop-in compatibility.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The accessible product summaries do not explicitly state the target device's RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is a PCI Express interface switch rather than an automotive-qualified device.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-11 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

PEX8604-BA50BI datasheet PEX8604-BA50BI pinout PEX8604-BA50BI datasheet pdf PEX8604-BA50BI specifications PEX8604-BA50BI price PEX8604-BA50BI stock PEX8604-BA50BI equivalent PEX8604-BA50BI replacement PEX8604-BA50BI footprint Broadcom PEX8604-BA50BI PEX8604-BA50BI vs PEX8606-BA50BI-G PEX8604 four lane PCIe switch PEX8604 embedded PCIe application PEX8604 196 BGA pinout PEX8604 Gen 2 5 GT/s

متعلقہ اجزاء اور اصطلاحات

Broadcom PEX8604-BA50BI PEX8604-BA50BI G PEX8604-BA50BC PEX8606-BA50BI-G ExpressLane PCI Express switch PCIe switch PCI Express interface IC PCI Express Base Specification Revision 2.0 PCI Express Gen 2 5.0 GT/s 196-BGA 15 mm by 15 mm BGA surface-mount semiconductor embedded systems consumer electronics high-availability systems PCIe hot-plug downstream endpoint ports differential signal integrity reference clock 0.95 V to 1.05 V operating range
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں