PIC10F206-E/P - 8-Bit 4MHz Flash MCU, 768B | Microchip
MPN: PIC10F206-E/P ✓ فعالPIC10F206-E/P جائزہ
A microcontroller (MCU) is a single-chip computer that combines a CPU, memory, and programmable I/O peripherals, enabling embedded control of mechanical, sensing, or lighting systems without a separate processor. The PIC10F family sits at the ultra-low-end of the 8-bit microcontroller hierarchy: 8-bit MCU → RISC MCU → Flash-programmable MCU → small-footprint MCU → PIC10F sub-family. Despite its minimal pin count and memory, the PIC10F206 retains the Harvard RISC core, 12-bit instruction word, and typical 2:1 code compression that characterizes the broader PIC architecture, making it ideal for cost-sensitive volume production.
Key features of the PIC10F206-E/P include an internal 4 MHz oscillator that eliminates external crystal cost, a wide operating voltage range of 2.0 V to 5.5 V, six general-purpose I/O pins, an 8-bit timer (TMR0), a watchdog timer with internal oscillator, in-circuit serial programming (ICSP) for field updates, and a comparator module. The device operates from a single supply and supports power-on reset with brown-out detect, simplifying external reset circuitry in space-constrained designs.
The PIC10F206 uses a 12-bit instruction word with a Harvard bus architecture, achieving one-instruction-per-clock execution at 1 µs per instruction. Its Flash program memory supports >100,000 erase/write cycles and 40-year retention, well above consumer-product lifecycle requirements. The integrated comparator, configured via firmware, can be used for analog signal detection without external op-amps, supporting low-power standby operation. Current consumption is typically in the µA range in sleep mode, enabling battery-friendly designs.
Typical applications include consumer appliance control, LED lighting drivers, remote control transmitters, low-end sensor signal conditioning, battery chargers, and small motor PWM drivers. The 4 MHz core and 24 bytes of RAM limit it to control tasks rather than user-interface rich applications, but the small footprint makes it ideal for cost-optimized designs where a single function replaces discrete logic.
When designing with the PIC10F206-E/P, ensure ICSP programming pins (GP0/GP1) are accessible for in-circuit firmware updates. Use decoupling capacitors of 0.1 µF close to VDD, and verify the comparator input pin configuration matches the analog input range. The device ships in a standard 8-pin PDIP footprint compatible with hand-soldered prototypes and through-hole production.
This page consolidates distributor pricing, pinout, drop-in alternatives, and design guidance not found in a single source on the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل PIC10F206-E/P — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC10F206-E/P (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Timers, Operating Temperature, ADC, Program Memory (Flash).
PIC10F204-E/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F202-E/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F200-E/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F200-I/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F202-I/P
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F206-E/P زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Architecture | 8-bit RISC (Harvard) |
| Core | PIC10 |
| Instruction Set | 33 single-word/single-cycle instructions, 12-bit instruction word |
| Program Memory (Flash) | 768 B (512 × 12) |
| RAM | 24 B |
| Data EEPROM | Not present (Flash-based only) |
| Max CPU Frequency | 4 MHz |
| Instruction Cycle | 1 µs at 4 MHz |
| Operating Voltage (VDD) | 2.0 V to 5.5 V |
| I/O Pins | 6 (GPIO with multiplexed functions) |
| Internal Oscillator | 4 MHz (factory calibrated, ±1% typical) |
| Timers | 1 × 8-bit Timer (TMR0) |
| Comparator | 1 × analog comparator (internal) |
| Watchdog Timer | Yes (internal oscillator-based) |
| Brown-out Reset (BOR) | Yes |
| ICSP (In-Circuit Serial Programming) | Yes (via GP0/GP1) |
| آپریٹنگ درجہ حرارت | -40 °C to +125 °C (Extended, -E suffix) |
| پیکیج | 8-pin PDIP (P) |
| Package Dimensions | 9.27 mm × 6.35 mm body, 2.54 mm pitch (standard PDIP-8) |
| ماؤنٹنگ ٹائپ | Through-Hole |
| Packaging | Tube |
| MSL لیول | Not applicable (through-hole package) |
| RoHS اسٹیٹس | Compliant |
| Lead-Free | Yes |
PIC10F206-E/P پن کنفیگریشن
| پن 1 | VDD — Positive supply voltage (2.0 V to 5.5 V) |
| پن 2 | GP5/T1CKI/OSC1/ICSPDAT — General-purpose I/O / Timer1 clock input / oscillator / ICSP data |
| پن 3 | GP4/AN3/CIN2-/T1G/OSC2/ICSPCLK — General-purpose I/O / analog input / comparator in- / Timer1 gate / oscillator / ICSP clock |
| پن 4 | GP3/MCLR/VPP — General-purpose input / Master Clear reset (active-low) / programming voltage |
| پن 5 | GP2/AN2/CIN2+/CIN0-/COUT/T0CKI — General-purpose I/O / analog input / comparator non-inverting input / comparator output / TMR0 clock input |
| پن 6 | GP1/AN1/CIN+/ICSPCLK — General-purpose I/O / analog input / comparator non-inverting input / ICSP clock |
| پن 7 | GP0/AN0/CIN-/ICSPDAT — General-purpose I/O / analog input / comparator inverting input / ICSP data |
| پن 8 | VSS — Ground reference |
عام استعمالات
PIC10F206-E/P کے لیے موزوں ہے 6 ایپلیکیشنs: Consumer Appliance Control, LED Lighting Drivers, Remote Control Transmitters, Battery Chargers (Simple CC/CV), Sensor Signal Conditioning, Small Motor PWM Drivers.
Consumer Appliance Control
The PIC10F206-E/P drives low-cost consumer appliance control logic such as toasters, blenders, and small kitchen devices where a single 8-bit MCU replaces discrete timing circuits. With 768B Flash and 24B RAM, it fits a state-machine program that controls relays or TRIACs, reads a few buttons, and drives LED indicators. The 2.0 V to 5.5 V supply accepts 3.3 V or 5 V rails, while the internal 4 MHz oscillator eliminates the cost of an external crystal. Six I/O pins are sufficient for a button, a buzzer, an LED, and a TRIAC gate, with one pin reserved for ICSP field updates. The -40 °C to +125 °C extended temperature grade covers both appliance interiors and outdoor enclosures.
تجویز کردہ
LED Lighting Drivers
The PIC10F206-E/P implements PWM dimming for low-power LED strips, downlights, and indicator lamps. Its 8-bit TMR0 timer produces PWM frequencies up to ~15 kHz, fast enough to avoid visible flicker on camera and slow enough to keep switching losses low. The on-chip comparator can sense supply voltage for thermal foldback, while the 6 I/O pins drive three LED channels with individual PWM, plus a button input and a status LED. With 2.0 V minimum supply, the device runs directly from 2 × AA cells for portable accent lighting, and the -40 °C to +125 °C range handles outdoor fixtures. Internal oscillator accuracy of ±1 % keeps dimming curve brightness consistent from unit to unit.
تجویز کردہ
Remote Control Transmitters
The PIC10F206-E/P is a strong fit for sub-1 USD IR or RF remote controls because its 6 I/O pins cover a 4×4 keypad matrix (4 rows, 2 columns) with spare lines for LED feedback and a TX enable. The internal 4 MHz oscillator eliminates the crystal that would otherwise dominate BOM cost in consumer remotes. With 768B Flash and 24B RAM, the firmware easily fits a learned-key table, debounce routines, and an NEC or RC5 protocol encoder. Brown-out reset prevents lockup under weak battery voltage, and the device's sub-µA sleep current extends coin-cell battery life in standby. The 8-pin PDIP package supports hand-soldered prototypes and through-hole production.
تجویز کردہ
Battery Chargers (Simple CC/CV)
The PIC10F206-E/P can implement a constant-current/constant-voltage charger for single-cell Li-Ion or NiMH packs. Its on-chip comparator monitors battery voltage, while TMR0 generates the PWM signal to a MOSFET or BJT pass element. The 6 I/O pins accept an enable button, a thermistor input, status LED, and charger-output FET gate. The wide 2.0 V to 5.5 V supply range operates from USB 5 V or 2 × AA cells, and the -40 °C to +125 °C extended temperature covers automotive cabin environments. The internal 4 MHz oscillator keeps BOM cost low, while ICSP allows firmware updates for different battery chemistries without hardware changes.
تجویز کردہ
Sensor Signal Conditioning
The PIC10F206-E/P serves as a front-end processor for analog sensors in industrial and consumer applications. Its internal analog comparator detects threshold crossings on temperature, light, or humidity sensors, freeing the host MCU from polling. The 8-bit TMR0 captures pulse-width-modulated sensor outputs such as those from ultrasonic distance sensors. With 768B Flash and 24B RAM, the device holds a small calibration table and threshold logic. The -40 °C to +125 °C extended temperature supports outdoor IoT sensor nodes, while the 2.0 V to 5.5 V supply accepts battery or solar-cell power. Six I/O pins accommodate multiple sensors plus a status LED.
تجویز کردہ
Small Motor PWM Drivers
The PIC10F206-E/P drives small DC motors and vibration motors in toys, wearables, and haptic feedback modules. TMR0 generates PWM at up to ~15 kHz, well above the audible range, ensuring silent motor operation. The 6 I/O pins drive a direction H-bridge (2 pins), an enable line, a speed-sense input, and a status LED. The on-chip comparator monitors back-EMF for stall detection without an external op-amp. The 2.0 V to 5.5 V supply operates from 2 × AA cells or a Li-Ion pack, while the -40 °C to +125 °C extended temperature range handles under-hood automotive vibration motors. ICSP enables firmware tuning for different motor load curves in production.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC10F206-E/P — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC10F204-E/P | PIC10F202-E/P | PIC10F200-E/P | PIC10F200-I/P | PIC10F202-I/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | PDIP-8 | PDIP-8 - same | PDIP-8 - same | PDIP-8 - same | PDIP-8 - same | PDIP-8 - same |
| Program Memory (Flash) | 768 B (512 × 12) | 512 B (384 × 12) | 768 B (512 × 12) | 384 B (256 × 12) | 384 B (256 × 12) | 768 B (512 × 12) |
| RAM | 24 B | 24 B | 24 B | 16 B | 16 B | 24 B |
| Max CPU Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| Operating Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| I/O Pins | 6 | 6 | 6 | 6 | 6 | 6 |
| Operating Temperature | -40 °C to +125 °C (Extended) | -40 °C to +125 °C (Extended) | -40 °C to +125 °C (Extended) | -40 °C to +125 °C (Extended) | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C (Industrial) |
| Internal Oscillator | 4 MHz (factory calibrated ±1 %) | 4 MHz (factory calibrated) | 4 MHz (factory calibrated) | 4 MHz (factory calibrated) | 4 MHz (factory calibrated) | 4 MHz (factory calibrated) |
| Comparator | Yes (internal) | Yes (internal) | Yes (internal) | Yes (internal) | Yes (internal) | Yes (internal) |
اہم امتیازی خصوصیات
- Largest program memory in PIC10F family in PDIP package (بمقابلہPIC10F204-E/P)
- Extended -40 °C to +125 °C operating range (بمقابلہPIC10F200-I/P)
- 24-byte RAM matches higher PIC10F siblings (بمقابلہPIC10F200-E/P)
ڈیزائن نوٹس
Place a 0.1 µF decoupling capacitor as close as possible to the VDD pin (pin 1) of the PIC10F206-E/P, with the trace length to VSS (pin 8) minimized. For designs switching LED or motor loads, add a 10 µF bulk capacitor on the same VDD rail to suppress voltage dips during load transients. The internal brown-out reset triggers reliably when VDD falls below 2.0 V, so external reset ICs are unnecessary in most applications.
GP3 (pin 4) on the PIC10F206-E/P serves dual duty as MCLR (reset) and is input-only by default; do not connect an output driver to this pin. Always provide a weak pull-up (typically 10 kΩ) on MCLR/GP3 to VDD for reliable operation, unless the internal MCLR is disabled in configuration bits. ICSP programming requires GP0/GP1 routing to a header; blocking access to these pins in production hardware will prevent field firmware updates.
Keep the VDD and VSS traces short and wide on the PCB to minimize supply inductance. The 8-pin PDIP footprint leaves ample room for hand-routed prototypes, but the SOT-23-6 and DFN variants of the PIC10F206 require ground planes and 0.1 µF bypass capacitors within 3 mm of the supply pins for stable operation. The internal oscillator's ±1 % accuracy is sensitive to VDD ripple; route digital signals away from VDD traces to avoid coupling.
The PIC10F206-E/P's internal comparator can be used to detect analog thresholds without an external op-amp, but the comparator inputs share pins with digital I/O. Avoid driving these pins with high-impedance analog sources when the digital output drivers are enabled, as contention will occur. For low-noise analog sensing, configure the pin as an input and disable the digital output buffer in firmware via the CMCON and TRISIO registers.
تعمیل کی معلومات
RoHS and lead-free compliance per Microchip product page. AEC-Q100 not applicable — the PIC10F206-E/P is not qualified for automotive safety-critical applications; use AEC-Q100 qualified parts like PIC16F or dsPIC for that purpose.
