PIC10F220T-I/MC - 8-bit Flash MCU, 384B, 8MHz | Microchip
MPN: PIC10F220T-I/MC ✓ فعالPIC10F220T-I/MC جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and configurable peripherals into one package. Within the broader taxonomy, the PIC10F220 belongs to the 8-bit microcontroller hypernym, the PIC10F family, and the Microchip PIC10F2xx sub-family. It is purpose-built for glue-logic replacement, logic-level translation, and ultra-compact analog or digital control nodes where board area and BOM cost dominate the design.
Key features include 4 MHz internal oscillator calibration within +/-1 percent, an 8-bit timer/counter (TMR0), a watchdog timer with on-chip oscillator, an 8-bit A/D converter with up to 6 input channels, and an in-circuit serial programming (ICSP) interface. The device operates across 2.0V to 5.5V, with a 1.8V brown-out-reset option, and supports industrial -40C to +85C temperature range. The I suffix confirms the industrial operating range; the T suffix denotes tape-and-reel packaging.
The PIC10F220 employs a RISC Harvard architecture with separate program and data buses, a 12-bit instruction word, and a deterministic two-stage pipeline. A comparator and internal voltage reference (0.6V nominal) are integrated for analog signal conditioning without external components. Power management features include an ultra-low-power sleep mode with wake-on-change I/O and selectable oscillator modes for system-level energy optimization.
Typical applications include consumer-electronics remote controls, battery chargers, LED driver controllers, sensor signal conditioning, low-power security sensors, and industrial control logic. The combination of 6 I/O pins, integrated ADC, and tiny DFN package makes it ideal for space-constrained designs.
When designing, ensure decoupling caps are placed close to VDD, avoid using GP3 as input only (it is input-only), and leverage the internal 4 MHz oscillator to minimize external component count. Consider the newer PIC10F322 for new designs, which adds more memory, PWM, and a CWG.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop source for sourcing and design-in decisions.
کے لیے ڈراپ اِن متبادل PIC10F220T-I/MC — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC10F220T-I/MC (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Timers, Internal Oscillator, Core Architecture, I/O Pins.
PIC10F200T-I/MC
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC10F220-I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F220T-E/OT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F204T-I/MC
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F202-I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F206-I/MC
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC10F220T-I/MC زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | 8-bit RISC PIC |
| Instruction Set | 33 single-word instructions, 12-bit instruction word |
| زیادہ سے زیادہ کلاک فریکوئنسی | 8 MHz (8 MIPS) |
| Program Memory (Flash) | 384 bytes (256 x 12 words) |
| RAM | 16 bytes |
| Data EEPROM | Not present |
| I/O Pins | 4 (GP0-GP2, GP5) + 1 input-only (GP3) |
| ADC | 8-bit, up to 4 input channels |
| Timers | 1 x 8-bit timer/counter (TMR0) |
| Watchdog Timer | Yes, with on-chip oscillator |
| Internal Oscillator | 4 MHz, +/-1% factory calibrated |
| Operating Voltage | 2.0 V to 5.5 V |
| Brown-out Reset | 1.8V typical |
| آپریٹنگ درجہ حرارت | -40C to +85C (Industrial) |
| پیکیج | 8-pin DFN (2x3 mm) (MC) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| RoHS اسٹیٹس | Compliant |
| Lead-Free | Yes |
PIC10F220T-I/MC پن کنفیگریشن
| پن 1 | VDD — Positive supply voltage |
| پن 2 | GP0 — Bidirectional I/O / AN0 |
| پن 3 | GP1 — Bidirectional I/O / AN1 / ICSPCLK |
| پن 4 | GP2 — Bidirectional I/O / AN2 / T0CKI |
| پن 5 | VSS — Ground reference |
| پن 6 | GP3/MCLR/VPP — Input-only I/O / Master Clear / Programming voltage |
| پن 7 | GP4 — Bidirectional I/O / AN3 / ICSPDAT |
| پن 8 | GP5 — Bidirectional I/O / OSCO |
عام استعمالات
PIC10F220T-I/MC کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Remote Control, LED Driver Controller, Sensor Signal Conditioning, Low-Cost Consumer Electronics Logic Replacement, Security and Accessory Sensors, Industrial Control Logic.
Battery-Powered Remote Control
The PIC10F220T-I/MC suits coin-cell or two-AAA powered remote controls where BOM area and quiescent current are tightly constrained. With 384B Flash it can hold a basic key-scan + transmit state machine, while the 4 MHz internal oscillator eliminates an external crystal and the integrated 8-bit ADC reads battery voltage for low-battery indication. The DFN-8 (2x3 mm) package is small enough to fit inside a key-fob housing alongside a single CR2032 cell. Sleep-mode current and the ability to wake on I/O change make it ideal for multi-year battery life.
تجویز کردہ
LED Driver Controller
The PIC10F220T-I/MC drives a constant-current LED string by combining its 8-bit ADC (for sensing LED current via a shunt) with a PWM-emulated control loop on a single GPIO. The internal 4 MHz oscillator is accurate enough to maintain 1 percent LED brightness matching without external trim. The wide 2.0V-5.5V supply range supports 3.3V and 5V LED driver rails. With 16B RAM and 384B Flash the part can implement up to four brightness presets and a fade-in/out ramp while leaving code space for thermal protection logic.
تجویز کردہ
Sensor Signal Conditioning
The PIC10F220T-I/MC is a strong fit for analog sensor signal conditioning in the smallest possible footprint. The 8-bit ADC and internal voltage reference (0.6V) read resistive sensors such as thermistors, photodiodes, or simple strain gauges, while the integrated comparator triggers threshold-based interrupts without CPU polling. The -40C to +85C industrial temperature range supports outdoor and industrial sensor nodes. The DFN-8 (2x3 mm) package fits inside the sensor housing itself, enabling miniaturized smart-sensor modules.
تجویز کردہ
Low-Cost Consumer Electronics Logic Replacement
The PIC10F220T-I/MC replaces discrete CMOS logic and small PLDs in consumer appliances where firmware configurability cuts BOM cost. With 33 instructions and 384B Flash it can implement 555-style timers, debounced switch inputs, sequence controllers, and motor pulse trains. The 4 MHz internal oscillator is accurate enough for timing-critical consumer tasks such as toy motor speed control or simple alarm-tone generation. The DFN-8 (2x3 mm) package integrates into extremely tight layouts, and the 2.0V-5.5V supply range operates directly from 2xAA alkaline cells.
تجویز کردہ
Security and Accessory Sensors
The PIC10F220T-I/MC fits door/window magnetic sensors, PIR motion pre-processors, and tamper-detection modules that need a tiny MCU with analog sensing and a long-life battery. The 8-bit ADC monitors a reed switch or PIR analog output, while sleep mode with wake-on-change I/O extends coin-cell life to multiple years. The watchdog timer with on-chip oscillator provides robust recovery from ESD-induced firmware stalls in field-deployed sensors. The DFN-8 (2x3 mm) footprint sits inside a coin-cell holder alongside a wireless transmitter.
تجویز کردہ
Industrial Control Logic
The PIC10F220T-I/MC suits small industrial control nodes such as relay drivers, optocoupler interfaces, and 24V-signal level translators. The 5.5V absolute-maximum supply handles 5V industrial rails with margin, and the input-only GP3 pin works as a hardware interrupt source for fast event capture. The 8-bit ADC reads 4-20 mA current loop sense resistors or 0-10V divided feedback. The -40C to +85C industrial temperature range covers factory-floor and outdoor cabinet environments. Tape-and-reel packaging supports high-volume SMT production.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC10F220T-I/MC — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC10F200T-I/MC | PIC10F204T-I/MC | PIC10F206-I/MC |
|---|---|---|---|---|
| Package | 8-pin DFN (2x3 mm) | 8-pin DFN (2x3 mm) - same | 8-pin DFN (2x3 mm) - same | 8-pin DFN (2x3 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Program Memory (Flash) | 384 bytes (256 x 12) | 384 bytes (256 x 12) | 256 bytes | 512 bytes |
| RAM | 16 bytes | 16 bytes | 16 bytes | 24 bytes |
| ADC | 8-bit, 4 channels | None | None | 8-bit, 4 channels + comparator |
| Maximum Clock | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Operating Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Approx. Unit Price (qty 1000) | $0.36 | ~$0.30 (lower cost, no ADC) | ~$0.32 (smaller Flash) | ~$0.42 (more features) |
اہم امتیازی خصوصیات
- Same DFN-8 footprint as PIC10F200 but with integrated 8-bit ADC (بمقابلہPIC10F200T-I/MC)
- More program memory than PIC10F204 in the same package (بمقابلہPIC10F204T-I/MC)
- Lower cost than PIC10F206 with smaller memory (بمقابلہPIC10F206-I/MC)
ڈیزائن نوٹس
Place a 0.1 uF decoupling capacitor as close as physically possible to the VDD pin (pin 1) and VSS (pin 5) of the DFN-8 package. For designs operating above 4 MHz with switching loads, add a bulk 1-10 uF tantalum or ceramic on the same supply rail within 5 mm of the MCU. The 2.0V-5.5V wide supply range allows direct connection to 2xAA alkaline cells without a boost converter, but verify brown-out-reset behavior at 1.8V if battery-end-of-life is part of the design. The internal 4 MHz oscillator accuracy is +/-1% at 5V/25C but degrades to +/-2% across the full voltage and temperature range, which matters for UART or IR timing-sensitive applications.
GP3 (pin 6) is input-only and is multiplexed with MCLR. Using it as a digital output will not work and may damage the pin if the corresponding TRIS bit is cleared. When MCLR is disabled in configuration bits, GP3 becomes a regular digital input. Configuration bits must be set explicitly in source code - leaving them at the default may enable the watchdog timer unintentionally, causing unexpected resets. The ADC input channels are shared with digital I/O, so configure the corresponding ANSEL bit before reading analog values to disable the digital input buffer and prevent back-driving.
Estimated: the PIC10F220T-I/MC in the DFN-8 (2x3 mm) package has a typical theta_JA of approximately 70 C/W on a standard 4-layer JEDEC test board. The absolute maximum junction temperature is 150C, but operation above 125C is not recommended. For most low-power digital applications at 4 MHz, self-heating is negligible (< 5 mW dissipation). The exposed pad is the only thermal path and should be soldered to the PCB for reliable operation, even though the pad is electrically floating. In battery-powered designs where ambient temperature swings are large, derate the oscillator accuracy and verify brown-out behavior at cold temperatures.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - for automotive designs use the factory-grade PIC10F220-E variant or PIC10F320/322 family AEC-Q100 parts.
