PIC10F220T-I/MC - 8-bit Flash MCU, 384B, 8MHz | Microchip
MPN： PIC10F220T-I/MC ✓ 啟用中PIC10F220T-I/MC 概覽
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and configurable peripherals into one package. Within the broader taxonomy, the PIC10F220 belongs to the 8-bit microcontroller hypernym, the PIC10F family, and the Microchip PIC10F2xx sub-family. It is purpose-built for glue-logic replacement, logic-level translation, and ultra-compact analog or digital control nodes where board area and BOM cost dominate the design.
Key features include 4 MHz internal oscillator calibration within +/-1 percent, an 8-bit timer/counter (TMR0), a watchdog timer with on-chip oscillator, an 8-bit A/D converter with up to 6 input channels, and an in-circuit serial programming (ICSP) interface. The device operates across 2.0V to 5.5V, with a 1.8V brown-out-reset option, and supports industrial -40C to +85C temperature range. The I suffix confirms the industrial operating range; the T suffix denotes tape-and-reel packaging.
The PIC10F220 employs a RISC Harvard architecture with separate program and data buses, a 12-bit instruction word, and a deterministic two-stage pipeline. A comparator and internal voltage reference (0.6V nominal) are integrated for analog signal conditioning without external components. Power management features include an ultra-low-power sleep mode with wake-on-change I/O and selectable oscillator modes for system-level energy optimization.
Typical applications include consumer-electronics remote controls, battery chargers, LED driver controllers, sensor signal conditioning, low-power security sensors, and industrial control logic. The combination of 6 I/O pins, integrated ADC, and tiny DFN package makes it ideal for space-constrained designs.
When designing, ensure decoupling caps are placed close to VDD, avoid using GP3 as input only (it is input-only), and leverage the internal 4 MHz oscillator to minimize external component count. Consider the newer PIC10F322 for new designs, which adds more memory, PWM, and a CWG.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a one-stop source for sourcing and design-in decisions.
直接替換替代品，適用於 PIC10F220T-I/MC — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC10F220T-I/MC （相同外形與佔位） — 差異在於 Package, Timers, Internal Oscillator, Core Architecture, I/O Pins.
PIC10F200T-I/MC
✅ 直接替換📋 參考替代品（不在目錄中）
PIC10F220-I/P
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC10F220T-E/OT
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC10F204T-I/MC
✅ 直接替換聯絡詢價
查看資料表 →PIC10F202-I/P
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC10F206-I/MC
✅ 直接替換聯絡詢價
查看資料表 →PIC10F220T-I/MC 最大額定值與電氣特性
| Core Architecture | 8-bit RISC PIC |
| Instruction Set | 33 single-word instructions, 12-bit instruction word |
| 最大時脈頻率 | 8 MHz (8 MIPS) |
| Program Memory (Flash) | 384 bytes (256 x 12 words) |
| RAM | 16 bytes |
| Data EEPROM | Not present |
| I/O Pins | 4 (GP0-GP2, GP5) + 1 input-only (GP3) |
| ADC | 8-bit, up to 4 input channels |
| Timers | 1 x 8-bit timer/counter (TMR0) |
| Watchdog Timer | Yes, with on-chip oscillator |
| Internal Oscillator | 4 MHz, +/-1% factory calibrated |
| Operating Voltage | 2.0 V to 5.5 V |
| Brown-out Reset | 1.8V typical |
| 工作溫度 | -40C to +85C (Industrial) |
| 封裝 | 8-pin DFN (2x3 mm) (MC) |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
| Lead-Free | Yes |
PIC10F220T-I/MC 腳位配置
| 腳位 1 | VDD — Positive supply voltage |
| 腳位 2 | GP0 — Bidirectional I/O / AN0 |
| 腳位 3 | GP1 — Bidirectional I/O / AN1 / ICSPCLK |
| 腳位 4 | GP2 — Bidirectional I/O / AN2 / T0CKI |
| 腳位 5 | VSS — Ground reference |
| 腳位 6 | GP3/MCLR/VPP — Input-only I/O / Master Clear / Programming voltage |
| 腳位 7 | GP4 — Bidirectional I/O / AN3 / ICSPDAT |
| 腳位 8 | GP5 — Bidirectional I/O / OSCO |
典型應用
PIC10F220T-I/MC 適用於 6 應用s: Battery-Powered Remote Control, LED Driver Controller, Sensor Signal Conditioning, Low-Cost Consumer Electronics Logic Replacement, Security and Accessory Sensors, Industrial Control Logic.
Battery-Powered Remote Control
The PIC10F220T-I/MC suits coin-cell or two-AAA powered remote controls where BOM area and quiescent current are tightly constrained. With 384B Flash it can hold a basic key-scan + transmit state machine, while the 4 MHz internal oscillator eliminates an external crystal and the integrated 8-bit ADC reads battery voltage for low-battery indication. The DFN-8 (2x3 mm) package is small enough to fit inside a key-fob housing alongside a single CR2032 cell. Sleep-mode current and the ability to wake on I/O change make it ideal for multi-year battery life.
推薦
LED Driver Controller
The PIC10F220T-I/MC drives a constant-current LED string by combining its 8-bit ADC (for sensing LED current via a shunt) with a PWM-emulated control loop on a single GPIO. The internal 4 MHz oscillator is accurate enough to maintain 1 percent LED brightness matching without external trim. The wide 2.0V-5.5V supply range supports 3.3V and 5V LED driver rails. With 16B RAM and 384B Flash the part can implement up to four brightness presets and a fade-in/out ramp while leaving code space for thermal protection logic.
推薦
Sensor Signal Conditioning
The PIC10F220T-I/MC is a strong fit for analog sensor signal conditioning in the smallest possible footprint. The 8-bit ADC and internal voltage reference (0.6V) read resistive sensors such as thermistors, photodiodes, or simple strain gauges, while the integrated comparator triggers threshold-based interrupts without CPU polling. The -40C to +85C industrial temperature range supports outdoor and industrial sensor nodes. The DFN-8 (2x3 mm) package fits inside the sensor housing itself, enabling miniaturized smart-sensor modules.
推薦
Low-Cost Consumer Electronics Logic Replacement
The PIC10F220T-I/MC replaces discrete CMOS logic and small PLDs in consumer appliances where firmware configurability cuts BOM cost. With 33 instructions and 384B Flash it can implement 555-style timers, debounced switch inputs, sequence controllers, and motor pulse trains. The 4 MHz internal oscillator is accurate enough for timing-critical consumer tasks such as toy motor speed control or simple alarm-tone generation. The DFN-8 (2x3 mm) package integrates into extremely tight layouts, and the 2.0V-5.5V supply range operates directly from 2xAA alkaline cells.
推薦
Security and Accessory Sensors
The PIC10F220T-I/MC fits door/window magnetic sensors, PIR motion pre-processors, and tamper-detection modules that need a tiny MCU with analog sensing and a long-life battery. The 8-bit ADC monitors a reed switch or PIR analog output, while sleep mode with wake-on-change I/O extends coin-cell life to multiple years. The watchdog timer with on-chip oscillator provides robust recovery from ESD-induced firmware stalls in field-deployed sensors. The DFN-8 (2x3 mm) footprint sits inside a coin-cell holder alongside a wireless transmitter.
推薦
Industrial Control Logic
The PIC10F220T-I/MC suits small industrial control nodes such as relay drivers, optocoupler interfaces, and 24V-signal level translators. The 5.5V absolute-maximum supply handles 5V industrial rails with margin, and the input-only GP3 pin works as a hardware interrupt source for fast event capture. The 8-bit ADC reads 4-20 mA current loop sense resistors or 0-10V divided feedback. The -40C to +85C industrial temperature range covers factory-floor and outdoor cabinet environments. Tape-and-reel packaging supports high-volume SMT production.
推薦
推薦產品摘要
工程參考資料，適用於 PIC10F220T-I/MC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC10F200T-I/MC | PIC10F204T-I/MC | PIC10F206-I/MC |
|---|---|---|---|---|
| Package | 8-pin DFN (2x3 mm) | 8-pin DFN (2x3 mm) - same | 8-pin DFN (2x3 mm) - same | 8-pin DFN (2x3 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Program Memory (Flash) | 384 bytes (256 x 12) | 384 bytes (256 x 12) | 256 bytes | 512 bytes |
| RAM | 16 bytes | 16 bytes | 16 bytes | 24 bytes |
| ADC | 8-bit, 4 channels | None | None | 8-bit, 4 channels + comparator |
| Maximum Clock | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Operating Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Approx. Unit Price (qty 1000) | $0.36 | ~$0.30 (lower cost, no ADC) | ~$0.32 (smaller Flash) | ~$0.42 (more features) |
主要差異化特點
- Same DFN-8 footprint as PIC10F200 but with integrated 8-bit ADC (對比PIC10F200T-I/MC)
- More program memory than PIC10F204 in the same package (對比PIC10F204T-I/MC)
- Lower cost than PIC10F206 with smaller memory (對比PIC10F206-I/MC)
設計說明
Place a 0.1 uF decoupling capacitor as close as physically possible to the VDD pin (pin 1) and VSS (pin 5) of the DFN-8 package. For designs operating above 4 MHz with switching loads, add a bulk 1-10 uF tantalum or ceramic on the same supply rail within 5 mm of the MCU. The 2.0V-5.5V wide supply range allows direct connection to 2xAA alkaline cells without a boost converter, but verify brown-out-reset behavior at 1.8V if battery-end-of-life is part of the design. The internal 4 MHz oscillator accuracy is +/-1% at 5V/25C but degrades to +/-2% across the full voltage and temperature range, which matters for UART or IR timing-sensitive applications.
GP3 (pin 6) is input-only and is multiplexed with MCLR. Using it as a digital output will not work and may damage the pin if the corresponding TRIS bit is cleared. When MCLR is disabled in configuration bits, GP3 becomes a regular digital input. Configuration bits must be set explicitly in source code - leaving them at the default may enable the watchdog timer unintentionally, causing unexpected resets. The ADC input channels are shared with digital I/O, so configure the corresponding ANSEL bit before reading analog values to disable the digital input buffer and prevent back-driving.
Estimated: the PIC10F220T-I/MC in the DFN-8 (2x3 mm) package has a typical theta_JA of approximately 70 C/W on a standard 4-layer JEDEC test board. The absolute maximum junction temperature is 150C, but operation above 125C is not recommended. For most low-power digital applications at 4 MHz, self-heating is negligible (< 5 mW dissipation). The exposed pad is the only thermal path and should be soldered to the PCB for reliable operation, even though the pad is electrically floating. In battery-powered designs where ambient temperature swings are large, derate the oscillator accuracy and verify brown-out behavior at cold temperatures.
合規資訊
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - for automotive designs use the factory-grade PIC10F220-E variant or PIC10F320/322 family AEC-Q100 parts.
