Microchip Technology

PIC16F1517-E/P 20MHz 8-Bit MCU 14KB Flash | Microchip

MPN: PIC16F1517-E/P ✓ فعال
1.8 V to 5.5 V Vdss 40-pin PDIP Package 20 MHz Speed 14 KB Flash Memory
MOQ: 1 |

PIC16F1517-E/P جائزہ

The Microchip Technology PIC16F1517-E/P is an 8-bit PIC16F microcontroller with a 20 MHz maximum clock speed, 14 KB of Flash program memory and 512 bytes of RAM, housed in a 40-pin PDIP package. It operates from 1.8 V to 5.5 V and includes a 10-bit ADC, two CCP modules, SPI, MI2C and EUSART peripherals for cost-sensitive embedded-control designs.

A PIC16F microcontroller is an embedded-control semiconductor that combines a processor core, Flash program memory, data RAM, digital I/O and configurable peripherals on one integrated circuit. The PIC16F1517 belongs to the enhanced mid-range PIC16 family, combining a compact instruction set with integrated analog and serial communications functions. Its XLP design is intended for applications where low operating power and efficient standby behavior are important.

The key features of the PIC16F1517-E/P include 8K × 14-word Flash organization, 512 bytes of SRAM, a 10-bit Analog-to-Digital Converter and an operating voltage range of 1.8 V to 5.5 V. The extended-temperature designation corresponds to an operating range of −40 °C to +125 °C. Two CCP peripherals support capture, compare, PWM and timer functions, while SPI, MI2C and EUSART provide wired communication options without requiring separate interface devices.

The device uses Microchip's enhanced mid-range core and is supported by the MPLAB development environment. Programmable peripherals can monitor digital inputs, measure analog voltages and generate PWM waveforms, allowing a single controller to supervise sensors, drive actuators and exchange data with other embedded modules. Configuration fuses and internal oscillator options should be selected with the programming tool and application requirements before PCB release.

Typical applications include industrial control panels, temperature monitoring, motor and actuator controllers, LED lighting systems, low-cost serial data loggers, appliance interfaces and compact battery-powered instruments. The 40-pin PDIP package provides generous I/O access for prototype and industrial control boards where through-hole assembly is acceptable. Its 1.8 V minimum supply voltage also supports low-voltage systems that require the same MCU and peripherals at reduced supply levels.

PCB designers should reserve all 40 package positions even when a particular design leaves some I/O unused, follow the manufacturer's decoupling and analog-input guidance, and verify programming and in-circuit-debug connections before fabrication. Because the -E/P suffix specifies the 40-pin PDIP package and extended temperature grade, it cannot be substituted mechanically with 44-pin TQFP or 28-pin variants without changing the PCB footprint.

کے لیے ڈراپ اِن متبادل PIC16F1517-E/P — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F1517-E/P (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Mounting Type, Program Memory Size, ADC, ADC Resolution.

Microchip Technology
Package: 44-pin TQFP (PT), 10x10 mm
Mounting Type: Surface Mount
Program Memory Size: 14KB (8K x 14)
Microchip Technology
Package: 40-PDIP (0.600", 15.24 mm)
Mounting Type: Through Hole
ADC: 10-bit, multiple channels (see datasheet)
Microchip Technology
Program Memory Size: 28 KB (16K x 14 words)
ADC Resolution: 10-bit

PIC16F1517-I/PT

✅ ڈراپ-اِن
Microchip Technology
📦 40-pin PDIP
PIC · 8-bit · PIC XLP 16F · FLASH · 14KB (8K x 14) · 512 B · 20 MHz

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PIC16F1518-E/P

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 40-pin PDIP
Same 40-pin PDIP footprint and 20 MHz core; program memory increases by approximately 2 KB, or 14%, from 14 KB to 16 KB.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC16F1518-I/P

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 40-pin PDIP
Same 40-pin PDIP footprint and approximately 16 KB Flash; upper temperature rating is +85 °C versus +125 °C, a 40 °C reduction.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC16F1519-E/P

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Microchip Technology
📦 40-pin PDIP
PIC16 (enhanced mid-range, 8-bit) · RISC, 35 instructions, 14-bit word · 28 KB (16K x 14) · 1024 bytes · 20 MHz · 20 MIPS · 1.8 V to 5.5 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PIC16F1519-I/P

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Microchip Technology
📦 40-pin PDIP
8-bit flash microcontroller · 20 MHz · 28 KB (16K x 14 words) · 1024 bytes · 10-bit · 28 channels · 1.8 V to 5.5 V · -40°C to +85°C

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PIC16F1517-E/P زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Controller Type 8-bit PIC16F microcontroller
Maximum CPU Frequency 20 MHz
Program Memory Size 14 KB Flash
Program Memory Organization 8K × 14 words
Data Memory Size 512 bytes RAM
ADC Resolution 10 bits
Operating Voltage Range 1.8 V to 5.5 V
آپریٹنگ درجہ حرارت رینج −40 °C to +125 °C
پیکیج 40-pin PDIP
CCP Modules 2
Serial Interfaces SPI, MI2C and EUSART
ماؤنٹنگ ٹائپ Through-hole
Low-Power Technology nanoWatt XLP
Programming Interface ICSP
Development Environment MPLAB X IDE
Debug Support MPLAB-compatible in-circuit debugging

PIC16F1517-E/P 40-pin pdip پن کنفیگریشن گائیڈ

PIC16F1517-E/P (40-pin pdip پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

PIC16F1517-E/P کے لیے 40-pin pdip پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC16F1517-E/P.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

PIC16F1517-E/P کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control and Sensor Interface, Temperature Monitoring and Data Logging, Motor and Actuator Control, LED Lighting and Dimming Control, Serial Communication Gateway, Battery-Powered Measurement Instrument.

🏭

Industrial Control and Sensor Interface

The PIC16F1517-E/P suits compact industrial controllers because it combines an 8-bit core, 20 MHz operating speed, 14 KB of Flash and a 10-bit ADC in a 40-pin PDIP package. Its 1.8 V to 5.5 V supply range provides flexibility when the board includes low-voltage sensors, while two CCP modules can measure timing events or generate PWM control signals. SPI, MI2C and EUSART permit connection to external transducers, display controllers and service interfaces. The −40 °C to +125 °C rating supports equipment operating across wide environmental changes.

📊

Temperature Monitoring and Data Logging

The PIC16F1517-E/P can supervise analog sensors through its 10-bit ADC and retain operating logic in 14 KB of Flash while using 512 bytes of RAM for temporary measurements and communication buffers. SPI, MI2C and EUSART enable attachment to external flash storage, digital temperature sensors or a host computer. A 20 MHz core provides sufficient timing headroom for periodic sampling, filtering and packet formatting. The extended-temperature grade is useful for monitoring equipment placed in cabinets, vehicles or industrial enclosures with significant thermal variation.

🔧

Motor and Actuator Control

The PIC16F1517-E/P is appropriate for small motor, valve and actuator control systems that need precise timing without a high-cost MCU. Two CCP peripherals can provide PWM output, input capture and compare functions, while the 20 MHz core can coordinate multiple control sequences. The 10-bit ADC can monitor current, position or supply feedback from external conditioning circuits, and EUSART can connect to a remote controller. Because the 40-pin PDIP footprint exposes more I/O than smaller packages, it also allows expansion for drivers, interlocks and diagnostic signals.

💡

LED Lighting and Dimming Control

The PIC16F1517-E/P can implement LED dimming, status indication and programmable lighting sequences using its timer and PWM-capable CCP peripherals. Its 14 KB Flash provides space for calibration tables, operating profiles and communication routines, while 512 bytes of RAM is sufficient for typical dimming state and serial buffers. The 1.8 V to 5.5 V operating range supports low-voltage lighting modules as well as 5 V industrial controllers. Its −40 °C to +125 °C grade is particularly relevant to luminaires and lighting controls installed outside conditioned environments.

🌐

Serial Communication Gateway

The PIC16F1517-E/P can bridge local sensors and a higher-level controller because it includes SPI, MI2C and EUSART in the same package as its 8-bit processor. The 20 MHz CPU supports protocol conversion, framing, checksums and basic filtering, while 14 KB of Flash holds multiple interface routines. Its 1.8 V to 5.5 V range enables use in mixed-voltage embedded networks, subject to correct level translation. The extended-temperature version also supports gateways installed in industrial cabinets, vehicle enclosures or outdoor equipment housings.

🔋

Battery-Powered Measurement Instrument

The PIC16F1517-E/P supports compact measurement instruments that require several interfaces without a large application processor. Its 10-bit ADC handles basic analog measurements, 512 bytes of RAM supports working buffers, and the XLP-oriented family design targets low-power operation. The microcontroller can use EUSART for configuration and reporting, MI2C or SPI for external sensors, and the two CCP modules for timing or excitation control. The −40 °C to +125 °C grade makes the device suitable for field equipment exposed to substantial ambient-temperature changes.

What is the operating voltage of PIC16F1517-E/P?
The PIC16F1517-E/P operates from 1.8 V to 5.5 V. According to the Microchip PIC16(L)F1516/1517/1518/1519 Data Sheet, document 40001452F, this range applies to the PIC16F1517 family and allows the controller to be used in low-voltage and conventional 5 V embedded systems. The selected supply voltage must remain compatible with the external components, oscillator settings, ADC references and programmed configuration. The -E/P suffix identifies the extended-temperature, 40-pin PDIP version rather than a separate voltage grade.
How much Flash and RAM does PIC16F1517-E/P have?
The PIC16F1517-E/P provides 14 KB of Flash program memory organized as 8K × 14 words, together with 512 bytes of data RAM. Microchip describes the family as an enhanced mid-range 8-bit Flash MCU in document 40001452F. The Flash stores executable code and nonvolatile configuration information, while the SRAM supports variables, stack operations, serial buffers and peripheral state. Confirm the compiled program size against the 8K-word program-memory limit before adding application features.
What is the maximum clock frequency of PIC16F1517-E/P?
The maximum CPU clock frequency of the PIC16F1517-E/P is 20 MHz. The 8-bit PIC16 core executes the firmware associated with the family described in Microchip Data Sheet 40001452F. Maximum instruction throughput does not mean every peripheral runs at 20 MHz; timers, serial interfaces and the ADC use divider or peripheral-specific clock relationships. The operating clock and configuration bits must therefore be selected together to maintain the intended timing and power behavior.
Where can I download the PIC16F1517-E/P datasheet PDF?
The official PIC16(L)F1516/1517/1518/1519 Data Sheet is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/40001452F.pdf. The manufacturer product page for PIC16F1517 is https://www.microchip.com/en-us/product/PIC16F1517. Use document 40001452F for the electrical characteristics, 40-pin PDIP pin diagram, memory organization, ADC limits, timing and peripheral descriptions applicable to the PIC16F1517 family.
Where can I find the PIC16F1517 pinout?
The PIC16F1517 pinout is shown in the 40-pin PDIP package diagram in Microchip Data Sheet 40001452F. The 40-pin PDIP drawing identifies the power pins, I/O ports, oscillator pins, programming pins and exposed peripheral functions. Use that diagram when assigning PCB nets and programming the device. Because package suffix codes change the physical lead arrangement, verify the drawing against the exact -E/P ordering code rather than relying on a generic 40-pin symbol.
Is PIC16F1517-E/P suitable for industrial temperature environments?
Yes, the PIC16F1517-E/P is specified for operation from −40 °C to +125 °C. The manufacturer ordering information in Data Sheet 40001452F distinguishes the -E grade from the -I grade, whose upper temperature rating is lower. The extended-temperature part is therefore the appropriate selection when the enclosure experiences substantial temperature variation. Confirm that every external component, crystal, capacitor and power source also satisfies the enclosure's temperature requirements.
What peripherals are integrated into PIC16F1517-E/P?
The PIC16F1517-E/P integrates a 10-bit ADC, two CCP modules, SPI, MI2C and EUSART. The CCP peripherals can provide timer, input-capture, compare and PWM functions, while the serial interfaces support synchronous and asynchronous communication. Microchip Data Sheet 40001452F defines the operating limits, register behavior and pin assignments for these blocks. Their package pins should be checked against the exact 40-pin PDIP diagram before assigning board functions.
Where to buy PIC16F1517-E/P online?
Use the Request a Quote form on this page to request PIC16F1517-E/P availability, current commercial terms and a quotation for the required quantity. The form is the appropriate channel for order processing without embedding a temporary price in the technical description. When requesting a quotation, identify the 40-pin PDIP package, extended-temperature grade, desired packing form and target quantity so the manufacturer or authorized supply chain can confirm the exact ordering code.
What is the price of PIC16F1517-E/P?
Current commercial pricing for PIC16F1517-E/P is obtained through the Request a Quote form on this page. The form allows quantity, packaging and delivery requirements to be entered so the quotation reflects the current supply position rather than a static list price. Buyers should specify the exact -E/P suffix because nearby PIC16F1517 order codes can use different package or temperature configurations and therefore represent different manufactured parts.
What is the lead time and stock status of PIC16F1517-E/P?
The current stock position and lead time for PIC16F1517-E/P should be confirmed through the Request a Quote form on this page. The manufacturer listing indicates that the part is offered for shipment, but a live quantity commitment still depends on the requested amount, date, packaging and supply channel. Entering the complete order details produces a more useful availability response than a general inquiry for the base PIC16F1517 device.
What can replace PIC16F1517-E/P?
PIC16F1517-I/P is the closest same-package temperature-grade alternative because it retains the 40-pin PDIP package while changing the upper temperature rating. Same-footprint alternatives such as PIC16F1518-E/P and PIC16F1519-E/P can provide different program-memory capacities but require software and configuration review. A valid replacement must match the PCB footprint, voltage range, core peripherals and memory needs; use Microchip's cross-reference search to confirm compatibility.
Can PIC16F1518-E/P replace PIC16F1517-E/P?
PIC16F1518-E/P is a potential same-package replacement, but it is not an unconditional substitute for PIC16F1517-E/P. The Microchip family shares the 40-pin PDIP option and core architecture, while program-memory capacity differs. Review the memory map, peripheral availability and device configuration in Data Sheet 40001452F, then confirm that the existing firmware and application code remain valid. A board-level fit alone does not establish complete software compatibility.
When should I choose PIC16F1517-E/P over PIC16F1517-I/P?
Choose PIC16F1517-E/P when the operating environment can reach temperatures above the PIC16F1517-I/P upper limit, because the -E version supports −40 °C to +125 °C. The -I/P part uses the same 40-pin PDIP package and retains the same 8-bit, 20 MHz and 14 KB Flash architecture, but its temperature grade is lower. For room-temperature consumer products, the -I/P grade may be sufficient; for industrial environments with wide temperature swings, the -E/P grade provides the appropriate margin.
Is PIC16F1517-E/P the same as PIC16F1518-E/P?
No, PIC16F1517-E/P and PIC16F1518-E/P are related members of the same Microchip family rather than identical devices. Both can be offered in a 40-pin PDIP package with the -E temperature grade, but their program-memory capacities differ. Engineers should compare the memory sizes, configuration and peripheral details in Data Sheet 40001452F before treating either device as a substitute. Existing firmware may require relocation or modification if the memory map changes.
What are the key specifications of PIC16F1517-E/P that engineers should know?
The PIC16F1517-E/P combines an 8-bit core, 20 MHz maximum clock, 14 KB Flash, 512 bytes RAM and a 10-bit ADC. It operates from 1.8 V to 5.5 V across −40 °C to +125 °C and is available in a 40-pin PDIP package. Two CCP modules, SPI, MI2C and EUSART provide integrated control and communications. These figures are defined by Microchip Data Sheet 40001452F and form the primary basis for footprint, memory, power and peripheral selection.

کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F1517-E/P — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose PIC16F1517-E/P for a new 40-pin PDIP design that requires an 8-bit PIC16 controller, 20 MHz operation, 14 KB Flash, 512 bytes RAM, 10-bit ADC conversion and operation across −40 °C to +125 °C. Choose PIC16F1517-I/P when the enclosure remains below +85 °C and the lower temperature grade is sufficient; its core, memory, voltage and package otherwise match. Consider PIC16F1518-E/P or PIC16F1519-E/P when additional program memory is useful but the firmware, memory map and device configuration have been checked against the target application. The -I/P versions of those larger-memory devices are appropriate only for environments within their +85 °C upper limit. In every case, verify the 40-pin PDIP footprint and program compatibility before releasing the PCB.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ PIC16F1517-I/P PIC16F1518-E/P PIC16F1518-I/P PIC16F1519-E/P PIC16F1519-I/P
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP 40-pin PDIP
CPU Type 8-bit PIC16F 8-bit PIC16F 8-bit PIC16F 8-bit PIC16F 8-bit PIC16F 8-bit PIC16F
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz 20 MHz
Program Memory 14 KB Flash, 8K × 14 words 14 KB Flash, 8K × 14 words Approximately 16 KB Flash Approximately 16 KB Flash Approximately 16 KB Flash Approximately 16 KB Flash
Operating Voltage Range 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V
Operating Temperature Range −40 °C to +125 °C −40 °C to +85 °C −40 °C to +125 °C −40 °C to +85 °C −40 °C to +125 °C −40 °C to +85 °C
ADC Resolution 10 bits 10 bits 10 bits 10 bits 10 bits 10 bits
Serial Interfaces SPI, MI2C and EUSART SPI, MI2C and EUSART SPI, MI2C and EUSART SPI, MI2C and EUSART SPI, MI2C and EUSART SPI, MI2C and EUSART
CCP Modules 2 2 2 2 2 2

اہم امتیازی خصوصیات

  • Higher temperature ceiling than the industrial-grade counterpart (بمقابلہPIC16F1517-I/P)
  • More Flash capacity in the PIC16F1518 same-package option (بمقابلہPIC16F1518-E/P)
  • More Flash capacity in the PIC16F1519 same-package option (بمقابلہPIC16F1519-E/P)

ڈیزائن نوٹس

Use the exact 40-pin PDIP lead arrangement in Microchip Data Sheet 40001452F when creating the schematic symbol and PCB footprint. Keep the programming connector accessible, provide a clean VDD and VSS connection, and place the required decoupling capacitors close to their associated supply pins. Although the -E/P package is through-hole, short analog and serial traces should still be routed away from high-current switching nodes to reduce coupling into the 10-bit ADC and communication interfaces.

Estimate the regulator and MCU dissipation before fixing the supply architecture. For a linear supply, the estimated MCU dissipation is approximately (VIN − VDD) × ILOAD plus internal overhead; for example, 5.5 V input, 3.3 V output and 10 mA load gives approximately 22 mW before internal losses. Verify the resulting junction temperature across the −40 °C to +125 °C ambient range and account for regulator efficiency, transient response and the source current available during startup.

Do not treat all PIC16F1517 order codes as mechanically interchangeable. The -E/P target is a 40-pin PDIP, while other suffix combinations can use 44-pin TQFP or other package forms. Similarly, changing from -E to -I reduces the upper temperature rating from +125 °C to +85 °C. Before substitution, compare the package drawing, pin functions, memory capacity, voltage range, configuration words and existing firmware requirements against the manufacturer ordering information.

Assign analog inputs deliberately rather than treating all digital-capable pins as equivalent ADC channels. Follow the datasheet's recommended analog input topology, keep the analog source impedance within the ADC sampling limits, and connect unused analog inputs according to the device guidance. For SPI, MI2C and EUSART traffic, route signals away from the crystal or internal-oscillator clock path and use a ground reference that remains continuous beneath the communication section.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The -E suffix denotes the extended-temperature grade, not automotive qualification. RoHS, REACH, lead-free, halogen-free and conflict-minerals status require confirmation from the manufacturer's current product compliance documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

pic16f1517 pinout PIC16F1517-E/P datasheet PIC16F1517-E/P datasheet pdf PIC16F1517-E/P pinout PIC16F1517 40 pin PDIP PIC16F1517-E/P equivalent PIC16F1517-E/P replacement PIC16F1517-E/P cross reference PIC16F1517-E/P vs PIC16F1517-I/P PIC16F1517-E/P price PIC16F1517-E/P stock Microchip PIC16F1517-E/P PIC16F1517 application circuit PIC16F1517 20MHz 8-bit MCU

متعلقہ اجزاء اور اصطلاحات

Microchip Technology PIC16F1517-E/P PIC16F1517 PIC16F1517-I/P PIC16F1518-E/P PIC16F1518-I/P PIC16F1519-E/P PIC16F1519-I/P 8-bit microcontroller PIC16F enhanced mid-range core embedded controller semiconductor Flash program memory static RAM 10-bit ADC CCP PWM SPI MI2C EUSART nanoWatt XLP MPLAB X IDE 40-pin PDIP through-hole package
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں