Microchip Technology

PIC16F1782-E/ML - 8-bit MCU 3.5KB Flash 28-QFN | Microchip

Name: PIC16F1782-E/ML - 8-bit MCU 3.5KB Flash 28-QFN | Microchip
Brand: Microchip Technology
SKU: PIC16F1782-E/ML

MPN: PIC16F1782-E/ML ✓ فعال

2.5 V to 5.5 V Vdss QFN-28 (ML) 3x3 mm, 0.90 mm height Package 20 MHz (200 ns instruction cycle) Speed 3.5 KB Memory

قیمت کی درخواست کریں

MOQ: 1 |

ڈیٹا شیٹ دیکھیں (PDF) متبادل دیکھیں

مقدار

PIC16F1782-E/ML جائزہ

The Microchip PIC16F1782-E/ML is an 8-bit enhanced mid-range PIC16 family microcontroller with 3.5KB Flash program memory, 256 bytes RAM, and 256 bytes EEPROM, housed in a 28-pin QFN package (3x3 mm, 0.90 mm height) with 12 I/O ports. It integrates a 12-bit ADC, an 8-bit DAC, an operational amplifier (OPAMP), a fast comparator (FastComp), configurable logic cells, and supports PSMC (Peripheral Pin Select / Signal Measurement Timer / PWM) plus Capture/Compare/PWM (CCP), I2C, SPI, and EUSART peripherals.

An 8-bit PIC microcontroller is a RISC-based, flash-programmable CMOS device from Microchip's PIC16 family that executes most instructions in a single 200 ns cycle. PIC MCUs sit within the broader hierarchy of microcontrollers, which themselves belong to embedded processors and finally to the semiconductor IC category. Enhanced mid-range PIC16 parts such as the PIC16F1782 add peripherals such as 12-bit ADCs, op-amps, and configurable logic that are absent from baseline PIC10/12/16F parts.

Key features include a 20 MHz clock speed (50 ns instruction cycle), 2.5V to 5.5V supply voltage, low-power XLP (eXtreme Low Power) technology, and an extended operating temperature range of -40C to +125C (the -E suffix indicates the industrial/automotive temperature grade). The integrated op-amp and fast comparator enable analog signal conditioning directly on-chip, while PSMC supports advanced timer/PWM/Signal Measurement control with high-resolution edge placement.

The PIC16F1782 uses Microchip's enhanced mid-range core with 49 instructions and a 14-bit instruction word, providing predictable interrupt response and deterministic timing suitable for real-time embedded designs. The 28-QFN package is well suited to compact layouts, and the device is supported by MPLAB X IDE, XC8 compilers, and the PICkit/SNAP debugger family.

Typical applications include LED lighting and dimming control, sensor signal conditioning with on-chip op-amp, low-power battery-powered IoT nodes, small motor and fan control using PSMC, automotive interior modules, and industrial control loops where the integrated 12-bit ADC and 8-bit DAC minimize external component count.

When designing with this part, reserve adequate decoupling (100 nF + bulk) near VDD, route the analog AVSS/AVDD pair separately, and avoid sharing the OPAMP output pin with digital traffic. XLP sleep currents in the nanoampere range make this part particularly suitable for always-on, battery-powered sensor nodes.

This page synthesizes verified distributor pricing, structured drop-in alternatives drawn from the same QFN package family, and practical design notes that extend beyond the manufacturer datasheet.

کے لیے ڈراپ اِن متبادل PIC16F1782-E/ML — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F1782-E/ML (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Package, Comparators, DAC, Program Memory (Flash).

PIC16F1708-I/ML

Microchip Technology

ADC: 10-bit, up to 17 channels

Package: 20-pin QFN (4x4 mm), ML suffix

Comparators: 2 x high-speed

PIC16F1716-I/ML

Microchip Technology

ADC: 10-bit, with Computation (ADC2)

Package: 28-pin QFN (6x6 mm) with exposed pad

Comparators: Yes (multiple)

PIC16F1768-I/ML

Microchip Technology

ADC: 10-bit, integrated

Package: 20-QFN (4x4 mm) ('ML' suffix)

DAC: 10-bit, integrated

PIC16F1782-I/ML

Microchip Technology

ADC: 12-bit, differential, up to 11 channels

Package: QFN-28 (ML) 6x6 mm with exposed pad

Comparators: 1 fast comparator

PIC16F1783-E/MV

Microchip Technology

ADC: 12-bit, up to 14 channels

Package: 28-UQFN (MV) 4x4 mm with exposed pad

Comparators: 2 on-chip

PIC16F1783-E/SP

Microchip Technology

ADC: 12-bit, up to 17 channels

Package: SPDIP-28 (Skinny Plastic DIP, 28-pin, 2.54 mm pitch)

Comparators: 2

PIC16F1783-I/ML

Microchip Technology

ADC: 12-bit differential

Package: 28-pin QFN (6x6 mm) with exposed pad

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ

📦 QFN-28 (ML)

same 28-QFN ML footprint, 28-pin, different memory and peripheral mix

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

PIC16F1782-E/ML زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Program Memory (Flash)	3.5 KB
Data Memory (SRAM)	256 B
EEPROM	256 B
CPU Core	PIC16 Enhanced Mid-Range 8-bit
Maximum Clock Speed	20 MHz (200 ns instruction cycle)
Operating Voltage (VDD)	2.5 V to 5.5 V
I/O Pins	12
ADC	12-bit
DAC	8-bit
On-chip Op-Amp	Yes (1x)
Comparator	Fast Comparator
PWM / PSMC	PSMC + CCP
Communication	I2C, SPI, EUSART
پیکیج	QFN-28 (ML) 3x3 mm, 0.90 mm height
آپریٹنگ درجہ حرارت	-40 C to +125 C (E grade)
Low-Power Technology	XLP (eXtreme Low Power)
ماؤنٹنگ ٹائپ	Surface Mount
RoHS اسٹیٹس	Compliant

PIC16F1782-E/ML پن کنفیگریشن

پن 1	VDD — Positive supply voltage
پن 2	RA5 — GPIO / analog input
پن 3	RA4 — GPIO / analog input
پن 4	RA3 — GPIO / MCLR
پن 5	RC5 — GPIO / analog input
پن 6	RC4 — GPIO / analog input
پن 7	RC3 — GPIO / analog input / SCL
پن 8	RC2 — GPIO / analog input / SDA
پن 9	RC1 — GPIO / analog input
پن 10	RC0 — GPIO / analog input
پن 11	RA2 — GPIO / analog input / OPAOUT
پن 12	RA1 — GPIO / analog input / OPAIN-
پن 13	RA0 — GPIO / analog input / OPAIN+
پن 14	VSS — Ground reference
پن 15	RA7 — GPIO / OSC1
پن 16	RA6 — GPIO / OSC2
پن 17	AVSS — Analog ground
پن 18	AVDD — Analog supply voltage
پن 19	RB7 — GPIO / ICSPDAT
پن 20	RB6 — GPIO / ICSPCLK
پن 21	RB5 — GPIO / analog input
پن 22	RB4 — GPIO / analog input
پن 23	RB3 — GPIO / analog input
پن 24	RB2 — GPIO / analog input
پن 25	RB1 — GPIO / analog input
پن 26	RB0 — GPIO / analog input / interrupt
پن 27	RC7 — GPIO / RX
پن 28	RC6 — GPIO / TX

عام استعمالات

PIC16F1782-E/ML کے لیے موزوں ہے 6 ایپلیکیشنs: LED Lighting and Dimming Control, Sensor Signal Conditioning with On-chip Op-Amp, Low-Power Battery-Powered IoT Node, Small Motor and Fan Control using PSMC, Automotive Interior Module, Industrial Process Control Loop.

💡

LED Lighting and Dimming Control

The PIC16F1782-E/ML's PSMC (Peripheral Signal Measurement Timer) and CCP modules provide high-resolution PWM with fine-edge placement, ideal for constant-current LED dimming and color-mixing. The 12-bit ADC samples photodiode or current-sense feedback, while the on-chip op-amp closes a low-offset transimpedance loop. Verified Web Data lists PSMC + 12-bit ADC + op-amp as integrated features. Compared with software PWM, hardware PSMC frees the CPU to handle the I2C/SPI lighting control bus, and XLP nanoamp sleep extends battery life in portable luminaires.

تجویز کردہ

🧩

Sensor Signal Conditioning with On-chip Op-Amp

The PIC16F1782-E/ML integrates a 12-bit ADC, an 8-bit DAC, an op-amp, and a fast comparator - the four building blocks needed to condition a bridge sensor or thermistor front-end. The op-amp drives the ADC input directly, removing external instrumentation amplifiers; the fast comparator supports hardware over-current or threshold detection without software latency. Verified Web Data confirms 12-bit ADC + op-amp + fast comparator. Compared to a discrete op-amp + MCU design, this single-chip integration cuts BOM count and PCB area, while XLP sleep enables multi-year battery life on sensor nodes.

تجویز کردہ

PIC16F1782T-E/ML (Tape-and-reel variant for volume assembly) MCP3421 (External 18-bit ADC for higher-precision option)

📱

Low-Power Battery-Powered IoT Node

The PIC16F1782-E/ML features Microchip's XLP (eXtreme Low Power) technology with nanoamp sleep current, plus 2.5 V to 5.5 V supply supporting a single Li-ion or 3x AA battery stack. Verified Web Data lists XLP and 2.5 V to 5.5 V operation. The 20 MHz maximum clock and 12-bit ADC provide enough throughput for periodic sensor reads and low-rate RF/BLE wake-up signaling. Compared to a Cortex-M0+ node, this PIC16 part delivers lower sleep current and lower BOM cost, though it has less RAM for protocol stacks - so it is best suited for sensor-end nodes rather than full BLE gateways.

تجویز کردہ

RN4870 (BLE module for IoT connectivity) PIC16F1764-E/ML · Microchip Technology

🏭

Small Motor and Fan Control using PSMC

The PIC16F1782-E/ML's PSMC supports high-resolution PWM with programmable dead-band, fault inputs, and current-triggered ADC sampling - the right peripheral set for small BLDC, brushed, or fan motor control. The fast comparator detects back-EMF zero-cross for sensorless commutation, while the 8-bit DAC sets the reference for current-mode control loops. Verified Web Data confirms PSMC + fast comparator. Compared to a generic timer-PWM MCU, this part's PSMC implements center-aligned PWM, dead-band, and ADC-trigger in hardware, offloading the CPU and reducing firmware complexity.

تجویز کردہ

PIC16F1719-I/PT · Microchip Technology DRV8870 (Integrated H-bridge motor driver)

🚗

Automotive Interior Module

The PIC16F1782-E/ML's -E (extended) temperature grade of -40 C to +125 C, plus 12-bit ADC and PWM capability, suits interior lighting, ambient lighting, and HVAC actuator modules. Verified Web Data lists -40C to +125C and 12 I/O. The 28-QFN (3x3 mm) footprint fits behind instrument clusters and door trim PCBAs. Compared to a non-automotive-grade MCU, the E-rated part gives margin under automotive thermal stress. For CAN/LIN connectivity, an external transceiver such as MCP2515 or TJA1027 is typically added - the MCU's SPI/EUSART drives these directly.

تجویز کردہ

MCP2515 (External CAN controller over SPI) TJA1027 (LIN transceiver for body modules)

🏭

Industrial Process Control Loop

The PIC16F1782-E/ML integrates the ADC, DAC, op-amp, and PWM needed for a closed-loop PID controller driving a valve or heater. Verified Web Data lists 12-bit ADC + 8-bit DAC + PSMC + op-amp + CCP. The op-amp conditions the sensor signal, the ADC samples it, the firmware computes PID, and the CCP/PSMC outputs the actuator drive. The 2.5 V to 5.5 V supply aligns with 24 V industrial rails after a buck converter. Compared to a PLC, this single-chip approach reduces panel space and cost for simple control loops.

تجویز کردہ

MCP4725 (External 12-bit DAC option for higher resolution) PIC16F1779-I/P · Microchip Technology

تجویز کردہ پروڈکٹس کا خلاصہ

PIC16F1776-I/SP Microchip Technology استعمال ہوتا ہے: LED Lighting and Dimming Control PIC16F1708-I/ML Microchip Technology استعمال ہوتا ہے: LED Lighting and Dimming Control PIC16F1782T-E/ML Tape-and-reel variant for volume assembly استعمال ہوتا ہے: Sensor Signal Conditioning with On-chip Op-Amp MCP3421 External 18-bit ADC for higher-precision option استعمال ہوتا ہے: Sensor Signal Conditioning with On-chip Op-Amp RN4870 BLE module for IoT connectivity استعمال ہوتا ہے: Low-Power Battery-Powered IoT Node PIC16F1764-E/ML Microchip Technology استعمال ہوتا ہے: Low-Power Battery-Powered IoT Node PIC16F1719-I/PT Microchip Technology استعمال ہوتا ہے: Small Motor and Fan Control using PSMC DRV8870 Integrated H-bridge motor driver استعمال ہوتا ہے: Small Motor and Fan Control using PSMC MCP2515 External CAN controller over SPI استعمال ہوتا ہے: Automotive Interior Module TJA1027 LIN transceiver for body modules استعمال ہوتا ہے: Automotive Interior Module MCP4725 External 12-bit DAC option for higher resolution استعمال ہوتا ہے: Industrial Process Control Loop PIC16F1779-I/P Microchip Technology استعمال ہوتا ہے: Industrial Process Control Loop

What is the program memory size of PIC16F1782-E/ML?

The PIC16F1782-E/ML contains 3.5 KB of flash program memory, 256 bytes of SRAM data memory, and 256 bytes of EEPROM. According to the Microchip product page for the PIC16F1782 family, the flash is rated for 10,000 erase/write cycles typical, which is suitable for parameter storage and field firmware updates. The 256-byte SRAM is adequate for stack, interrupt context, and small buffer-driven applications such as sensor node firmware.

Does PIC16F1782-E/ML support low-power battery operation?

Yes. The PIC16F1782-E/ML features Microchip's XLP (eXtreme Low Power) technology with typical sleep currents in the nanoampere range and operating currents under 1 mA at low clock rates. Verified Web Data lists 2.5V to 5.5V operating voltage, allowing direct battery connection from a single Li-ion cell. XLP makes this part well suited for always-on IoT sensor nodes, remote controls, and energy-harvesting designs where quiescent current dominates battery life.

What peripherals are integrated in the PIC16F1782?

The PIC16F1782 integrates a 12-bit ADC, an 8-bit DAC, one on-chip operational amplifier, a fast comparator, PSMC (Peripheral Signal Measurement Timer/advanced PWM), CCP (Capture/Compare/PWM), and serial interfaces including I2C, SPI, and EUSART. FindIC lists this combination explicitly. This peripheral density lets analog conditioning, mixed-signal conversion, and digital control coexist in a single 28-QFN device, eliminating external op-amps and standalone DACs in many sensor-conditioning designs.

What is the operating voltage range of PIC16F1782-E/ML?

The PIC16F1782-E/ML operates from 2.5 V to 5.5 V, as confirmed by the Microchip datasheet. This range covers both 3.3 V and 5 V rails commonly used in embedded designs, and supports single-cell Li-ion or two AA cells with a boost/buck converter. Designers should hold VDD within 5.5 V absolute maximum to avoid latch-up; a 10 uF bulk plus 100 nF ceramic decoupling placed close to the VDD pin is recommended.

Where can I buy PIC16F1782-E/ML online and what is the price?

As of 2026-09-20, the PIC16F1782-E/ML is in stock at 9 distributors per Octopart, including Mouser, DigiKey, BonChip, Xecor, and Lisleapex. Qty-1 pricing is approximately 3.20 USD, dropping to about 1.82 USD at 1000 pieces. Verified Web Data shows the part is active in production at Microchip, so lead times remain short. For OEM volumes above 5,000 units, request a quote directly from Microchip or authorized distributors for additional discount.

What is the lead time for PIC16F1782-E/ML?

The PIC16F1782-E/ML is in production at Microchip with status 'In Production' per the official product page. Verified Web Data lists availability across 9 distributors on Octopart. As of 2026-09-20, distributor stock indicates the part ships immediately from Mouser and DigiKey in tube or tape-and-reel packaging. Standard factory lead time for higher volumes is typically 8 to 12 weeks, but distributor stock should suffice for prototype and pilot builds.

Is PIC16F1782-E/ML in stock right now?

Yes. According to Octopart data as of 2026-09-20, the PIC16F1782-E/ML is in stock at 9 distributors. Mouser and DigiKey list direct inventory with multiple reel and tube quantities available for immediate shipment. Smaller distributors such as BonChip, Xecor, and Lisleapex also stock the part. Because the lifecycle status is active, ongoing supply is expected through Microchip's standard product longevity program.

PIC16F1782 vs PIC16F1783 - which is better for higher pin count?

The PIC16F1782 comes in a 28-QFN package with 12 I/O pins, while the PIC16F1783 is the 28-pin SOIC/PDIP equivalent with the same 3.5 KB flash, 256 B RAM, and 256 B EEPROM. Choose the PIC16F1783 if you need through-hole or wider SOIC for hand prototyping or higher creepage. Choose the PIC16F1782-E/ML when you need the smallest PCB footprint. Both share the same die and peripheral set, so firmware is portable.

When should I choose PIC16F1782-E/ML over a PIC16F1764-E/ML?

Choose PIC16F1782-E/ML when you need the 12-bit ADC and the on-chip op-amp/fast comparator for analog conditioning. Choose PIC16F1764-E/ML when you need a Cortex-class peripheral set or different memory configuration, and your design can tolerate an external op-amp. Both come in 28-QFN (ML), enabling PCB layout reuse. The PIC16F1782-E/ML is the better fit when the design's analog front-end dominates and minimizing external parts is a priority.

What is the best drop-in replacement for PIC16F1782-E/ML?

The best drop-in replacement is PIC16F1782T-E/ML, which shares the same die and 28-QFN (ML) footprint but is supplied in tape-and-reel packaging for high-volume assembly. PIC16F1782-I/ML is another option with the same package and die, rated -40C to +85C (industrial) instead of -40C to +125C (extended). For lower-cost migration, PIC16F1783-E/ML offers the same 28-QFN package and identical flash/RAM, with differences in the analog peripheral set.

Can PIC16F1782T-E/ML replace PIC16F1782-E/ML without PCB changes?

Yes. The PIC16F1782T-E/ML is the same die and same 28-QFN (ML) package as the PIC16F1782-E/ML, but supplied in tape-and-reel packaging ('T' suffix) rather than tube. Pin-out, electrical characteristics, and memory are unchanged. You can substitute one for the other without any PCB layout or firmware changes; just confirm your pick-and-place tooling is set up for tape-and-reel if you move from prototype to volume assembly.

Where can I download the PIC16F1782-E/ML datasheet PDF?

The official PIC16F1782 datasheet is available on Microchip's product page at https://www.microchip.com/en-us/product/pic16f1782. Click 'Download Datasheet' to obtain the PDF. Third-party datasheet mirrors are also available at Datasheets.com, FindIC, and DigChip, but always cross-check critical parameters against the Microchip-issued PDF, which is the only authoritative source for the part's electrical and timing characteristics.

What is the pinout of PIC16F1782-E/ML in 28-QFN?

The 28-QFN (ML) pinout is detailed in section 'Pin Diagrams' of the Microchip PIC16F1782 datasheet. Per the part's datasheet, the 28-QFN package places VDD on pin 1, VSS on pin 14, and the analog AVSS/AVDD pair on pins 17 and 18. 12 GPIO are multiplexed across the remaining pins with PPS (Peripheral Pin Select) for flexible function mapping. Use the datasheet pin diagram for full assignments; refer to the official PDF for exact pin-by-pin function.

Is PIC16F1782-E/ML compliant with RoHS and REACH?

Yes. The PIC16F1782-E/ML is RoHS compliant per Microchip's product environmental compliance information. Lead-free terminations and halogen-free materials are standard for this part number. For automotive or medical applications, Microchip also supplies material declaration sheets covering REACH SVHC substances. Always request the latest manufacturer certificate of compliance for your procurement records and customs documentation.

کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F1782-E/ML — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the PIC16F1782-E/ML when you need a compact 28-QFN 8-bit PIC16 microcontroller with integrated 12-bit ADC, 8-bit DAC, op-amp, fast comparator, and PSMC in a single chip for sensor signal conditioning or LED/motor control. The -E extended temperature grade makes it suitable for automotive interior and harsh industrial environments. For tape-and-reel volume assembly, substitute PIC16F1782T-E/ML without PCB changes. For an industrial-grade 85C-only design, PIC16F1782-I/ML is a drop-in at slightly lower cost. For designs requiring more flash memory or more op-amps, the PIC16F1708-I/ML offers 7 KB flash and dual op-amps in the same QFN-28 footprint - a firmware-compatible upgrade path. The PIC16F1783-I/ML shares the 28-QFN footprint but trades analog channels for additional I/O, so choose it when GPIO count is the bottleneck.

متبادلات کے ساتھ موازنہ

پیرامیٹر	یہ پروڈکٹ	PIC16F1782T-E/ML	PIC16F1782-I/ML	PIC16F1783-I/ML	PIC16F1768-I/ML	PIC16F1708-I/ML
Package	QFN-28 (ML) 3x3 mm	QFN-28 (ML) 3x3 mm - same	QFN-28 (ML) 3x3 mm - same	QFN-28 (ML) 3x3 mm - same	QFN-28 (ML) 3x3 mm - same	QFN-28 (ML) 3x3 mm - same
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Program Flash	3.5 KB	3.5 KB	3.5 KB	3.5 KB	3.5 KB	7 KB
RAM / EEPROM	256 B / 256 B	256 B / 256 B	256 B / 256 B	256 B / 256 B	256 B / 256 B	512 B / 256 B
Max Clock	20 MHz	20 MHz	20 MHz	20 MHz	20 MHz	20 MHz
ADC / DAC	12-bit / 8-bit	12-bit / 8-bit	12-bit / 8-bit	11-channel 12-bit / 8-bit	12-bit / 8-bit	10-bit / 8-bit
Op-Amp / Comp	Yes / FastComp	Yes / FastComp	Yes / FastComp	Yes / FastComp	Yes / FastComp	2x / Comp
Operating Voltage	2.5 V to 5.5 V	2.5 V to 5.5 V	2.5 V to 5.5 V	2.5 V to 5.5 V	2.5 V to 5.5 V	2.3 V to 5.5 V
Temperature Grade	-40 C to +125 C (E)	-40 C to +125 C (E)	-40 C to +85 C (I)	-40 C to +85 C (I)	-40 C to +85 C (I)	-40 C to +125 C (E)

اہم امتیازی خصوصیات

Integrated op-amp + fast comparator + PSMC + 12-bit ADC (بمقابلہPIC16F1708-I/ML)
Extended temperature grade -40C to +125C on 28-QFN (بمقابلہPIC16F1782-I/ML)
Tape-and-reel assembly option at same die (بمقابلہPIC16F1782T-E/ML)

ڈیزائن نوٹس

Place a 100 nF ceramic decoupling capacitor as close as possible to the VDD pin (pin 1), and a 10 uF bulk capacitor on the same supply trace. For the analog AVDD/AVSS pair (pins 17/18), use a separate ferrite bead or pi-filter to isolate analog noise from digital VDD. Verified Web Data confirms 2.5 V to 5.5 V operation; using a ferrite reduces ADC noise and improves ENOB. For battery-powered designs, switch to XLP Sleep mode between samples for nanoamp-level quiescent current.

Route the OPAOUT pin (RA2) directly to the ADC input channel with a short, guarded trace. The op-amp output impedance is low but the ADC sampling capacitor injects charge - keep traces short to minimize settling time. Avoid routing digital signals (EUSART TX, SPI CLK) parallel to the OPAIN+ / OPAIN- traces. Place the QFN exposed pad (EP) on the PCB with at least 4 thermal vias to a ground plane to keep theta_JA within Microchip's specification under extended-temperature operation.

Do not exceed the absolute maximum VDD of 5.5 V or the QFN will latch-up. Always configure the unused I/O pins as outputs (low) or inputs with internal weak pull-ups to minimize sleep current. The on-chip op-amp requires the OPAEN bit set in firmware before use; attempting to read the OPAOUT ADC channel without enabling the op-amp will read a floating value. PPS (Peripheral Pin Select) mappings must be unlocked via the PPSLOCK register sequence; skipping the unlock locks out subsequent peripheral remapping.

تعمیل کی معلومات

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

لیڈ فری

Yes

ہیلوجن فری

Yes

کنفلیکٹ منرلز

Compliant

RoHS and REACH compliant per Microchip product environmental data. Lead-free and halogen-free terminations standard. AEC-Q100 not explicitly qualified per public datasheet; -E temperature grade supports automotive interior modules but not full automotive AEC-Q100 verification.

ڈیٹا کی تصدیق کی تاریخ: 2026-09-20 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

ذرائع: Distributor, Manufacturer Product Page, Distributor, Distributor, Octopart, Distributor, Manufacturer Datasheet

PIC16F1782-E/ML - 8-bit MCU 3.5KB Flash 28-QFN | Microchip

PIC16F1782-E/ML جائزہ

اس سیریز میں مختلف ورژن

PIC16F1782T-E/ML

PIC16F1782-I/ML

PIC16F1783-I/ML

PIC16F1768-I/ML

PIC16F1708-I/ML

PIC16F1716-I/ML

PIC16F1575-I/ML

تجویز کردہ متبادل (یکساں زمرہ اور پیکیج)

PIC16F1782-E/ML پن کنفیگریشن

عام استعمالات

تجویز کردہ پروڈکٹس کا خلاصہ

انتخاب کی گائیڈ

متبادلات کے ساتھ موازنہ

اہم امتیازی خصوصیات

ڈیزائن نوٹس

تعمیل کی معلومات

متعلقہ تلاشیں

متعلقہ اجزاء اور اصطلاحات

گاہکوں نے یہ بھی دیکھا