PIC16F1828-E/P - 32MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F1828-E/P ✓ فعالPIC16F1828-E/P جائزہ
An 8-bit microcontroller is a compact embedded-control semiconductor that executes instructions from embedded Flash memory and controls sensors, actuators, communications interfaces, and human-interface circuits. PIC16 microcontrollers sit within the hierarchy of microcontrollers, embedded processors, semiconductors, and electronic control devices. Their deterministic architecture, compact package, and low-power design make them useful for cost-sensitive control products, battery-powered equipment, and compact industrial or consumer systems.
The PIC16F1828-E/P combines a maximum 32 MHz clock with 7 KB of Flash memory and 256 bytes of RAM. Its 18 available I/O pins support multiple digital and analog functions, while the integrated internal oscillator reduces external clock-component requirements. The family supports programming through high-voltage In-Circuit Serial Programming and low-voltage ICSP. Integrated debug support means a separate debug header is not required, although PICkit 3 and MPLAB ICD 3 tools are identified as programming and debug options.
The enhanced mid-range core provides a practical balance between processing performance, memory capacity, and peripheral integration. The product family supports capacitive-touch sensing through the mTouch feature, allowing capacitive sensing electrodes and signal conditioning to be used for controls, proximity detection, or custom user interfaces. Its operating voltage range of 2.5 V to 5 V supports both 3.3 V and 5 V systems, making it appropriate for low-voltage embedded-control designs.
Typical uses include capacitive-control panels, compact temperature controllers, digital potentiometer systems, lighting controllers, appliance controls, and small sensor nodes. In each case, the internal oscillator and 18-pin I/O budget simplify board design, while the 32 MHz operating rate supports responsive control loops and frequent peripheral servicing.
PCB design should preserve access to the ICSP programming pins and account for the PDIP package's through-hole footprint and 7.62 mm row spacing. Decoupling and analog-capacitive sensing layouts should follow the pin-description and application guidance in the manufacturer datasheet, particularly when mTouch electrodes are connected to adjacent sensing channels.
This page combines the exact package and ordering code, programming and debug guidance, structured technical specifications, practical application analysis, and a candid review of the limited drop-in alternatives available for this PDIP configuration.
کے لیے ڈراپ اِن متبادل PIC16F1828-E/P — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F1828-E/P (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.
PIC16F1828-I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F1828T-I/P
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F1828-E/P زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Microcontroller Type | 8-bit flash PIC microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 7 KB Flash (4K × 14 words) |
| Data Memory | 256 bytes RAM |
| I/O Pin Count | 18 pins |
| پیکیج | 20-pin PDIP, 0.300 inch (7.62 mm) row spacing |
| Operating Voltage Range | 2.5 V to 5 V |
| Core Architecture | Enhanced mid-range PIC core |
| Clock Source | 32 MHz internal oscillator |
| Programming | High-voltage ICSP and low-voltage ICSP |
| Debug Support | Integrated on-device debug |
| Programming Tool Support | PICkit 3 and MPLAB ICD 3 |
| Capacitive Touch | mTouch capacitive sensing supported |
| Low-Power Technology | nanoWatt XLP technology |
| ماؤنٹنگ اسٹائل | Through-hole PDIP |
PIC16F1828-E/P پن کنفیگریشن
| پن 1 | RA0/AN0/C12IN0-/C12IN0+ — RA0 port pin, analog input, and capacitive sensing input |
| پن 2 | RA1/AN1/C12IN1- — RA1 port pin, analog input, and capacitive sensing input |
| پن 3 | RA2/AN2/C2IN+ — RA2 port pin, analog input, and comparator input |
| پن 4 | RA3/AN3/C2IN- — RA3 port pin, analog input, and comparator input |
| پن 5 | RA4/T0A/C12IN2- — RA4 port pin, timer input, and capacitive sensing input |
| پن 6 | RA5/AN4/C2IN0- — RA5 port pin, analog input, and comparator input |
| پن 7 | VSS — Ground reference |
| پن 8 | RB0/AN12/C12IN1+ — RB0 port pin, analog input, and capacitive sensing input |
| پن 9 | RB1/AN10/C12IN2+ — RB1 port pin, analog input, and capacitive sensing input |
| پن 10 | RB2/AN8 — RB2 port pin and analog input |
| پن 11 | RB3/AN9/PGM/C12IN0+ — RB3 port pin, analog input, programming pin, and capacitive sensing input |
| پن 12 | RB4/AN11 — RB4 port pin and analog input |
| پن 13 | VDD — Positive supply voltage |
| پن 14 | RA6/OSC1/CLKIN/C12IN3+ — RA6 port pin, oscillator input, external clock input, and capacitive sensing input |
| پن 15 | RA7/OSC2/CLKOUT/C12IN3- — RA7 port pin, oscillator output, clock output, and capacitive sensing input |
| پن 16 | RC0/AN5/C12IN4-/C12IN4+ — RC0 port pin, analog input, and capacitive sensing input |
| پن 17 | RC1/AN6/C12IN5-/C12IN5+ — RC1 port pin, analog input, and capacitive sensing input |
| پن 18 | RC2/AN7/C12IN6-/C12IN6+ — RC2 port pin, analog input, and capacitive sensing input |
| پن 19 | RC3/SCK/SCL — RC3 port pin, SPI clock, and I2C clock |
| پن 20 | RC4/SDI/SDA — RC4 port pin, SPI data input, and I2C data |
عام استعمالات
PIC16F1828-E/P کے لیے موزوں ہے 6 ایپلیکیشنs: Capacitive Touch Control Panels, Temperature and Process Controllers, LED Lighting Controllers, Battery-Powered Sensor Nodes, Compact Appliance Control, Digital Potentiometer and Analog Control.
Capacitive Touch Control Panels
The PIC16F1828-E/P fits compact capacitive-control panels because the PIC16F1828 family supports mTouch sensing while providing 18 I/O pins and a 32 MHz internal clock. The 7 KB Flash capacity can hold panel configuration, debounce logic, and communication routines, while the 20-pin PDIP package simplifies through-hole prototype assembly. Connect the selected sensing channels according to the family pin-description tables, maintain the recommended grounding and filtering, and validate electrode geometry against the final enclosure because plastic thickness and hand proximity affect coupling.
تجویز کردہ
Temperature and Process Controllers
A PIC16F1828-E/P-based temperature controller can use its analog-capable I/O to read a sensor, run a control algorithm, and drive an alarm or actuator. The 32 MHz clock supports responsive firmware timing, and the 7 KB Flash and 256-byte RAM are appropriate for compact supervisory loops. Use the manufacturer datasheet when assigning analog inputs and configuring digital outputs. Keep sensor traces away from switching nodes, provide local regulator and bypass capacitance, and include calibration limits in firmware because sensor and resistor tolerances directly affect the controlled temperature.
تجویز کردہ
LED Lighting Controllers
The PIC16F1828-E/P can sequence LED banks, implement dimming, and manage push-button or capacitive inputs in a lighting controller. Its 18 I/O pins provide ample digital-control capacity, while the internal 32 MHz oscillator removes a separate crystal and associated support components from a cost-sensitive design. Drive LED current through suitable transistor or driver circuitry rather than directly from a microcontroller pin, and provide local decoupling near the MCU. Firmware should include debounce, ramp limits, and thermal-duty controls to prevent visible flicker or overcurrent conditions.
تجویز کردہ
Battery-Powered Sensor Nodes
PIC16F1828-E/P suits low-duty-cycle sensor nodes that periodically measure an input, evaluate thresholds, and transmit or locally display a result. Its nanoWart XLP technology, 2.5 V to 5 V operating range, and internal 32 MHz oscillator support compact, low-component designs. Configure unused pins appropriately and use the power-conservation guidance in the manufacturer datasheet to avoid unnecessary active current. Battery life should be evaluated using the actual radio, sensor, and regulator duty cycle because the MCU contribution depends on firmware-controlled sleep duration and wake frequency.
تجویز کردہ
Compact Appliance Control
The PIC16F1828-E/P is suitable for appliance subsystems that coordinate buttons, relays, indicators, and a small display or serial interface. The enhanced mid-range PIC core provides ample control capability for standalone embedded logic, and the 20-pin PDIP package remains useful for prototypes and manually assembled products. Use a robust driver stage for inductive loads, provide flyback protection, and place the MCU and switching circuitry so high-current paths do not disturb sensitive control signals. Production designs should also validate brownout behavior during motor or heater transitions.
تجویز کردہ
Digital Potentiometer and Analog Control
The PIC16F1828-E/P can control digital potentiometers, sensor setpoints, or other SPI-compatible analog-control devices. The 32 MHz processor supports responsive SPI transactions, while 18 I/O pins leave room for chip-select, direction, interlock, and status signals. Follow the MCU and target-device voltage requirements before connecting the bus, and use the manufacturer pin table to avoid conflicts with programming or mTouch functions. Firmware should validate the mechanical end positions and apply controlled ramps rather than abruptly changing the output, reducing transient loads and wear.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F1828-E/P — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F1828-I/P | PIC16F1828T-I/P |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP |
| CPU Architecture | Enhanced mid-range PIC 8-bit core | Enhanced mid-range PIC 8-bit core | Enhanced mid-range PIC 8-bit core |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz |
| Program Memory | 7 KB Flash (4K × 14 words) | 7 KB Flash (4K × 14 words) | 7 KB Flash (4K × 14 words) |
| RAM | 256 bytes | 256 bytes | 256 bytes |
| I/O Pin Count | 18 pins | 18 pins | 18 pins |
| Operating Voltage | 2.5 V to 5 V | 2.5 V to 5 V | 2.5 V to 5 V |
| Temperature-Grade Suffix | E suffix | I suffix | T-I suffix |
| Programming and Debug | High-voltage ICSP, low-voltage ICSP, integrated debug | High-voltage ICSP, low-voltage ICSP, integrated debug | High-voltage ICSP, low-voltage ICSP, integrated debug |
اہم امتیازی خصوصیات
- Retains a through-hole 20-pin PDIP footprint (بمقابلہPIC16F1828-E/SO)
- Extended-temperature E suffix for wider environmental requirements (بمقابلہPIC16F1828-I/P)
- Combines 32 MHz operation with integrated mTouch support (بمقابلہPIC16F1824-I/P)
ڈیزائن نوٹس
Reserve the ICSP programming interface even though the PIC16F1828-E/P has integrated debug support. Keep programming and ground connections accessible when the PDIP package is installed, and follow the high-voltage and low-voltage ICSP circuit diagrams in the manufacturer datasheet. This prevents a finished board from requiring soldered modifications for firmware recovery or production programming.
Treat mTouch-capable pins as sensitive analog inputs. Route capacitive-sensing electrodes away from switching nodes, high-current return paths, and long clock or pulse edges. Use the recommended grounding and filtering arrangement from Data Sheet 41419A, and prototype the final electrode geometry in its intended enclosure because panel thickness and nearby conductive structures alter the sensed capacitance.
Place the required bypass capacitor close to the VDD pin and connect VSS to a low-impedance ground plane. Use the capacitor value and placement guidance specified in the manufacturer datasheet rather than relying on a generic bulk capacitor. Decouple analog sensor circuits separately when applicable, and test brownout and power-up behavior across the complete 2.5 V to 5 V supply range.
Do not interchange PDIP, SOIC, and QFN ordering codes as drop-in replacements; their footprints and pin assignments differ even when the underlying device family is similar. Also do not assume that changing the temperature-grade suffix preserves environmental qualification. Compare the complete pin description, operating-temperature limits, programming method, supply range, and package drawing before approving a replacement.
تعمیل کی معلومات
The Microchip product page and Data Sheet 41419A identify the device and its technical characteristics but do not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.