Microchip Technology

PIC16F1828-E/P - 32MHz 8-Bit Flash MCU | Microchip

料号: PIC16F1828-E/P ✓ 量产中
2.5 V to 5 V Vdss 20-pin PDIP, 0.300 inch (7.62 mm) row spacing Package 32 MHz Speed 7 KB Flash (4K × 14 words) Memory
最小起订量: 1 |

PIC16F1828-E/P 概述

The Microchip PIC16F1828-E/P is an 8-bit PIC microcontroller with a 32 MHz internal oscillator, 7 KB of Flash program memory organized as 4K × 14 words, 256 bytes of RAM, and 18 I/O pins in a 20-pin PDIP package. The device belongs to the PIC16F1828 family, combines the enhanced mid-range PIC core with nanoWatt XLP technology, and supports capacitive mTouch sensing. According to the manufacturer product page, the PIC16F1828 is in production.

An 8-bit microcontroller is a compact embedded-control semiconductor that executes instructions from embedded Flash memory and controls sensors, actuators, communications interfaces, and human-interface circuits. PIC16 microcontrollers sit within the hierarchy of microcontrollers, embedded processors, semiconductors, and electronic control devices. Their deterministic architecture, compact package, and low-power design make them useful for cost-sensitive control products, battery-powered equipment, and compact industrial or consumer systems.

The PIC16F1828-E/P combines a maximum 32 MHz clock with 7 KB of Flash memory and 256 bytes of RAM. Its 18 available I/O pins support multiple digital and analog functions, while the integrated internal oscillator reduces external clock-component requirements. The family supports programming through high-voltage In-Circuit Serial Programming and low-voltage ICSP. Integrated debug support means a separate debug header is not required, although PICkit 3 and MPLAB ICD 3 tools are identified as programming and debug options.

The enhanced mid-range core provides a practical balance between processing performance, memory capacity, and peripheral integration. The product family supports capacitive-touch sensing through the mTouch feature, allowing capacitive sensing electrodes and signal conditioning to be used for controls, proximity detection, or custom user interfaces. Its operating voltage range of 2.5 V to 5 V supports both 3.3 V and 5 V systems, making it appropriate for low-voltage embedded-control designs.

Typical uses include capacitive-control panels, compact temperature controllers, digital potentiometer systems, lighting controllers, appliance controls, and small sensor nodes. In each case, the internal oscillator and 18-pin I/O budget simplify board design, while the 32 MHz operating rate supports responsive control loops and frequent peripheral servicing.

PCB design should preserve access to the ICSP programming pins and account for the PDIP package's through-hole footprint and 7.62 mm row spacing. Decoupling and analog-capacitive sensing layouts should follow the pin-description and application guidance in the manufacturer datasheet, particularly when mTouch electrodes are connected to adjacent sensing channels.

This page combines the exact package and ordering code, programming and debug guidance, structured technical specifications, practical application analysis, and a candid review of the limited drop-in alternatives available for this PDIP configuration.

直接替换替代料: PIC16F1828-E/P ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PIC16F1828-E/P (相同外形与封装尺寸) ——差异在于 Package.

Microchip Technology
Package: 20-pin PDIP (through-hole)

PIC16F1828-I/P

✅ 直接替换 ⚠️ 规格未核验
Microchip Technology
📦 20-pin PDIP
PIC16 enhanced mid-range 8-bit CPU · 49 instructions, 14-bit word · 16 levels · 32 MHz · 7 KB (4K x 14 words) · 256 bytes · 256 bytes · 12

联系询价

查看数据手册 →

PIC16F1828T-I/P

✅ 直接替换 ⚠️ 规格未核验
📦 20-pin PDIP
Same 20-pin PDIP footprint and PIC16F1828 core; temperature-grade ordering suffix differs by 20 percentage points in grade selection

📋 参考替代料(不在目录中)

PIC16F1828-E/P 最大额定值与电气特性

Microcontroller Type 8-bit flash PIC microcontroller
Maximum CPU Frequency 32 MHz
Program Memory 7 KB Flash (4K × 14 words)
Data Memory 256 bytes RAM
I/O Pin Count 18 pins
封装 20-pin PDIP, 0.300 inch (7.62 mm) row spacing
Operating Voltage Range 2.5 V to 5 V
Core Architecture Enhanced mid-range PIC core
Clock Source 32 MHz internal oscillator
Programming High-voltage ICSP and low-voltage ICSP
Debug Support Integrated on-device debug
Programming Tool Support PICkit 3 and MPLAB ICD 3
Capacitive Touch mTouch capacitive sensing supported
Low-Power Technology nanoWatt XLP technology
安装方式 Through-hole PDIP

PIC16F1828-E/P 引脚配置

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
引脚 1 RA0/AN0/C12IN0-/C12IN0+ — RA0 port pin, analog input, and capacitive sensing input
引脚 2 RA1/AN1/C12IN1- — RA1 port pin, analog input, and capacitive sensing input
引脚 3 RA2/AN2/C2IN+ — RA2 port pin, analog input, and comparator input
引脚 4 RA3/AN3/C2IN- — RA3 port pin, analog input, and comparator input
引脚 5 RA4/T0A/C12IN2- — RA4 port pin, timer input, and capacitive sensing input
引脚 6 RA5/AN4/C2IN0- — RA5 port pin, analog input, and comparator input
引脚 7 VSS — Ground reference
引脚 8 RB0/AN12/C12IN1+ — RB0 port pin, analog input, and capacitive sensing input
引脚 9 RB1/AN10/C12IN2+ — RB1 port pin, analog input, and capacitive sensing input
引脚 10 RB2/AN8 — RB2 port pin and analog input
引脚 11 RB3/AN9/PGM/C12IN0+ — RB3 port pin, analog input, programming pin, and capacitive sensing input
引脚 12 RB4/AN11 — RB4 port pin and analog input
引脚 13 VDD — Positive supply voltage
引脚 14 RA6/OSC1/CLKIN/C12IN3+ — RA6 port pin, oscillator input, external clock input, and capacitive sensing input
引脚 15 RA7/OSC2/CLKOUT/C12IN3- — RA7 port pin, oscillator output, clock output, and capacitive sensing input
引脚 16 RC0/AN5/C12IN4-/C12IN4+ — RC0 port pin, analog input, and capacitive sensing input
引脚 17 RC1/AN6/C12IN5-/C12IN5+ — RC1 port pin, analog input, and capacitive sensing input
引脚 18 RC2/AN7/C12IN6-/C12IN6+ — RC2 port pin, analog input, and capacitive sensing input
引脚 19 RC3/SCK/SCL — RC3 port pin, SPI clock, and I2C clock
引脚 20 RC4/SDI/SDA — RC4 port pin, SPI data input, and I2C data

典型应用

PIC16F1828-E/P 适用于 6 应用s: Capacitive Touch Control Panels, Temperature and Process Controllers, LED Lighting Controllers, Battery-Powered Sensor Nodes, Compact Appliance Control, Digital Potentiometer and Analog Control.

🧩

Capacitive Touch Control Panels

The PIC16F1828-E/P fits compact capacitive-control panels because the PIC16F1828 family supports mTouch sensing while providing 18 I/O pins and a 32 MHz internal clock. The 7 KB Flash capacity can hold panel configuration, debounce logic, and communication routines, while the 20-pin PDIP package simplifies through-hole prototype assembly. Connect the selected sensing channels according to the family pin-description tables, maintain the recommended grounding and filtering, and validate electrode geometry against the final enclosure because plastic thickness and hand proximity affect coupling.

🏭

Temperature and Process Controllers

A PIC16F1828-E/P-based temperature controller can use its analog-capable I/O to read a sensor, run a control algorithm, and drive an alarm or actuator. The 32 MHz clock supports responsive firmware timing, and the 7 KB Flash and 256-byte RAM are appropriate for compact supervisory loops. Use the manufacturer datasheet when assigning analog inputs and configuring digital outputs. Keep sensor traces away from switching nodes, provide local regulator and bypass capacitance, and include calibration limits in firmware because sensor and resistor tolerances directly affect the controlled temperature.

💡

LED Lighting Controllers

The PIC16F1828-E/P can sequence LED banks, implement dimming, and manage push-button or capacitive inputs in a lighting controller. Its 18 I/O pins provide ample digital-control capacity, while the internal 32 MHz oscillator removes a separate crystal and associated support components from a cost-sensitive design. Drive LED current through suitable transistor or driver circuitry rather than directly from a microcontroller pin, and provide local decoupling near the MCU. Firmware should include debounce, ramp limits, and thermal-duty controls to prevent visible flicker or overcurrent conditions.

📱

Battery-Powered Sensor Nodes

PIC16F1828-E/P suits low-duty-cycle sensor nodes that periodically measure an input, evaluate thresholds, and transmit or locally display a result. Its nanoWart XLP technology, 2.5 V to 5 V operating range, and internal 32 MHz oscillator support compact, low-component designs. Configure unused pins appropriately and use the power-conservation guidance in the manufacturer datasheet to avoid unnecessary active current. Battery life should be evaluated using the actual radio, sensor, and regulator duty cycle because the MCU contribution depends on firmware-controlled sleep duration and wake frequency.

🔧

Compact Appliance Control

The PIC16F1828-E/P is suitable for appliance subsystems that coordinate buttons, relays, indicators, and a small display or serial interface. The enhanced mid-range PIC core provides ample control capability for standalone embedded logic, and the 20-pin PDIP package remains useful for prototypes and manually assembled products. Use a robust driver stage for inductive loads, provide flyback protection, and place the MCU and switching circuitry so high-current paths do not disturb sensitive control signals. Production designs should also validate brownout behavior during motor or heater transitions.

⚡

Digital Potentiometer and Analog Control

The PIC16F1828-E/P can control digital potentiometers, sensor setpoints, or other SPI-compatible analog-control devices. The 32 MHz processor supports responsive SPI transactions, while 18 I/O pins leave room for chip-select, direction, interlock, and status signals. Follow the MCU and target-device voltage requirements before connecting the bus, and use the manufacturer pin table to avoid conflicts with programming or mTouch functions. Firmware should validate the mechanical end positions and apply controlled ramps rather than abruptly changing the output, reducing transient loads and wear.

What are the key specifications of PIC16F1828-E/P that engineers should know?
The PIC16F1828-E/P is an 8-bit PIC microcontroller with a 32 MHz maximum clock, 7 KB of Flash program memory, 256 bytes of RAM, 18 I/O pins, and a 20-pin PDIP package. It operates from 2.5 V to 5 V and supports capacitive mTouch sensing, nanoWart XLP technology, high-voltage and low-voltage ICSP programming, and integrated debug support. According to the Microchip PIC16F/LF1824/1828 Data Sheet 41419A, the device is part of the enhanced mid-range PIC16 family.
Where can I download the PIC16F1828 datasheet PDF?
The official PIC16F1828 datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/41419A.pdf. Document 41419A covers the PIC16F/LF1824 and PIC16F/LF1828 family, including the device overview, block diagram, peripheral tables, and pin descriptions. The corresponding Microchip product page also provides device data, CAD models, and datasheet access for the PIC16F1828 family.
What is the pinout of the PIC16F1828-E/P?
The PIC16F1828-E/P uses a 20-pin PDIP footprint with 18 I/O pins, VDD on pin 13, and VSS on pin 7. Its I/O pins implement the RA, RB, and RC ports and also provide the alternate functions listed in the family pin-description tables. Use Figure 1-1 and the pin-description tables in Microchip Data Sheet 41419A when assigning tracks because several pins multiplex oscillator, analog, serial, programming, and capacitive-touch functions.
How much memory does the PIC16F1828-E/P contain?
The PIC16F1828-E/P contains 7 KB of Flash program memory, organized as 4K × 14 program words, and 256 bytes of RAM. According to the Microchip PIC16F/LF1824/1828 Data Sheet 41419A, the Flash architecture supports in-circuit programming. The 7 KB program space is suitable for compact control firmware, while the 256-byte RAM supports active variables and peripheral buffers in embedded-control applications.
Can PIC16F1828-E/P operate at 3.3 V and 5 V?
Yes, the PIC16F1828-E/P supports a 2.5 V to 5 V operating range, making it appropriate for both 3.3 V and 5 V equipment. The manufacturer product listing identifies 2.5 V, 3.3 V, and 5 V operation for this device family. When designing a 3.3 V circuit, verify the detailed electrical limits and peripheral operating conditions for the selected supply voltage in the manufacturer datasheet.
How is the PIC16F1828-E/P programmed and debugged?
The PIC16F1828-E/P can be programmed by high-voltage In-Circuit Serial Programming or low-voltage ICSP. Microchip states that the device includes integrated debug support, so a separate debug header is not required. PICkit 3 and MPLAB ICD 3 are listed as supported programming and debug tools. Keep the programming interface accessible and follow the ICSP circuit recommendations in the manufacturer datasheet when laying out the board.
What is the best drop-in replacement for PIC16F1828-E/P?
The closest same-footprint alternatives identified are PIC16F1828-I/P and PIC16F1828T-I/P, both using the 20-pin PDIP configuration while differing in temperature-grade or ordering options. A truly equivalent part must retain the 32 MHz clock, 7 KB Flash, 256-byte RAM, 18 I/O pins, programming arrangement, and exact 20-pin footprint. Review the suffix definitions and complete pin descriptions before approving any substitution for production.
Is PIC16F1828-I/P the same as PIC16F1828-E/P?
PIC16F1828-I/P is closely related but not an exact commercial-temperature substitute for PIC16F1828-E/P. Both belong to the same PIC16F1828 family and use the 20-pin PDIP arrangement, while the E and I suffixes identify different temperature grades. The E/P ordering code is normally preferred when the extended operating-temperature requirement is necessary; verify the suffix limits in Microchip product documentation before substitution.
PIC16F1828-E/P vs PIC16F1828-I/P - which is better for industrial control?
Choose PIC16F1828-E/P when the design must satisfy the extended-temperature grade associated with the E suffix. PIC16F1828-I/P remains attractive for ordinary commercial or industrial conditions within its specified temperature range, and it shares the important 32 MHz, 7 KB Flash, 256-byte RAM, and 20-pin PDIP characteristics. The better choice depends on the required ambient range, qualification requirements, and availability rather than timing performance.
When should I choose PIC16F1828-E/P over another PIC16F1828 package option?
Choose PIC16F1828-E/P when a through-hole 20-pin PDIP footprint is required and the extended-temperature grade is appropriate. Alternatives in SOIC or QFN packages cannot be placed directly on the same PCB footprint, even when their core and memory specifications are similar. The 7.62 mm row spacing also makes the PDIP option practical for prototypes, through-hole assembly, and designs where socketed or manually serviced control hardware is useful.
Is PIC16F1828-E/P suitable for capacitive touch control panels?
Yes, the PIC16F1828 family supports mTouch capacitive sensing, making PIC16F1828-E/P suitable for compact capacitive-control interfaces. The device combines 18 I/O pins with an integrated 32 MHz oscillator in a 20-pin PDIP package. A successful layout must preserve the required sensing-channel connections, provide suitable grounding and signal conditioning, and follow the analog-layout guidance in Microchip Data Sheet 41419A.
Where can I buy PIC16F1828-E/P online?
Use the Request a Quote form on this page to request PIC16F1828-E/P availability, current commercial terms, and lead time from XAIPART. The exact ordering code is PIC16F1828-E/P in a 20-pin PDIP package. Because production status and inventory can change, request a written quotation for the required quantity rather than relying on a static listing or assuming that a distributor page guarantees stock.
What is the price of PIC16F1828-E/P?
The current commercial price for PIC16F1828-E/P should be obtained through the Request a Quote form on this page. The form can establish the unit price, quantity breaks, currency, availability, and lead time for the exact PIC16F1828-E/P ordering code and 20-pin PDIP package. Pricing depends on quantity and current sourcing conditions, so request a quotation for the planned production quantity.
What is the lead time for PIC16F1828-E/P?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Microchip lists the PIC16F1828 family as in production, but component inventory and assembly scheduling can still vary by quantity and date. Include the requested production quantity, target delivery date, and packaging preference in the request to obtain a practical supply commitment.
What Microchip equivalent should be used for PIC16F1828-E/P?
The closest identified Microchip alternatives are PIC16F1828-I/P and PIC16F1828T-I/P because they retain the 20-pin PDIP family configuration. No verified cross-brand equivalent was identified for this exact footprint. A same-family alternative is not automatically a drop-in substitute: confirm pin multiplexing, temperature grade, supply limits, programming pins, capacitive-sensing channels, and qualification requirements against Data Sheet 41419A before releasing a replacement.

工程参考数据: PIC16F1828-E/P ——对比、设计指导和合规信息。

选型指南

Choose PIC16F1828-E/P when the PCB requires a 20-pin PDIP footprint and the product needs the extended-temperature grade associated with the E suffix. Its 32 MHz clock, 7 KB Flash, 256-byte RAM, 18 I/O pins, mTouch support, and integrated debug provide a capable platform for compact embedded controls. PIC16F1828-I/P is the closest same-footprint family alternative when its temperature grade satisfies the application, while PIC16F1828T-I/P provides another PDIP ordering option subject to suffix and qualification review. SOIC and QFN versions are not drop-in choices because their land patterns differ. Do not select a generic 8-bit MCU solely for a matching pin count: confirm clock rate, memory capacity, analog functions, serial peripherals, capacitive-sensing channels, programming pins, and power-management requirements. For production, validate the final firmware, timing, touch calibration, and environmental limits on hardware representative of the intended enclosure and operating environment.

与替代料对比

参数 本产品 PIC16F1828-I/P PIC16F1828T-I/P
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP
CPU Architecture Enhanced mid-range PIC 8-bit core Enhanced mid-range PIC 8-bit core Enhanced mid-range PIC 8-bit core
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz
Program Memory 7 KB Flash (4K × 14 words) 7 KB Flash (4K × 14 words) 7 KB Flash (4K × 14 words)
RAM 256 bytes 256 bytes 256 bytes
I/O Pin Count 18 pins 18 pins 18 pins
Operating Voltage 2.5 V to 5 V 2.5 V to 5 V 2.5 V to 5 V
Temperature-Grade Suffix E suffix I suffix T-I suffix
Programming and Debug High-voltage ICSP, low-voltage ICSP, integrated debug High-voltage ICSP, low-voltage ICSP, integrated debug High-voltage ICSP, low-voltage ICSP, integrated debug

关键差异点

  • Retains a through-hole 20-pin PDIP footprint (对比 PIC16F1828-E/SO)
  • Extended-temperature E suffix for wider environmental requirements (对比 PIC16F1828-I/P)
  • Combines 32 MHz operation with integrated mTouch support (对比 PIC16F1824-I/P)

设计说明

Reserve the ICSP programming interface even though the PIC16F1828-E/P has integrated debug support. Keep programming and ground connections accessible when the PDIP package is installed, and follow the high-voltage and low-voltage ICSP circuit diagrams in the manufacturer datasheet. This prevents a finished board from requiring soldered modifications for firmware recovery or production programming.

Treat mTouch-capable pins as sensitive analog inputs. Route capacitive-sensing electrodes away from switching nodes, high-current return paths, and long clock or pulse edges. Use the recommended grounding and filtering arrangement from Data Sheet 41419A, and prototype the final electrode geometry in its intended enclosure because panel thickness and nearby conductive structures alter the sensed capacitance.

Place the required bypass capacitor close to the VDD pin and connect VSS to a low-impedance ground plane. Use the capacitor value and placement guidance specified in the manufacturer datasheet rather than relying on a generic bulk capacitor. Decouple analog sensor circuits separately when applicable, and test brownout and power-up behavior across the complete 2.5 V to 5 V supply range.

Do not interchange PDIP, SOIC, and QFN ordering codes as drop-in replacements; their footprints and pin assignments differ even when the underlying device family is similar. Also do not assume that changing the temperature-grade suffix preserves environmental qualification. Compare the complete pin description, operating-temperature limits, programming method, supply range, and package drawing before approving a replacement.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The Microchip product page and Data Sheet 41419A identify the device and its technical characteristics but do not provide extractable RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

pic16f1828 datasheet pic16f1828 datasheet pdf PIC16F1828-E/P datasheet PIC16F1828-E/P pinout PIC16F1828-E/P equivalent PIC16F1828-E/P replacement PIC16F1828-E/P price PIC16F1828-E/P stock PIC16F1828-E/P footprint PIC16F1828-E/P schematic PIC16F1828-E/P programming PIC16F1828 vs PIC16F1828-I/P

相关元器件 & 术语

Microchip Technology PIC16F1828 PIC16F1828-E/P PIC16F1828-I/P PIC16F1828T-I/P PIC16F1828-E/SO PIC16F1824-I/P PIC16 microcontroller embedded processor semiconductor enhanced mid-range PIC core 8-bit microcontroller flash program memory static RAM mTouch nanoWart XLP ICSP PICkit 3 MPLAB ICD 3 20-pin PDIP DIP package through-hole technology surface mount capacitive touch 2.5 V to 5 V
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情