PIC16F18424-E/JQ - 8-Bit XLP MCU 7KB Flash 16-UQFN | Microchip
MPN: PIC16F18424-E/JQ ✓ فعالPIC16F18424-E/JQ جائزہ
A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (typically Flash), working RAM, and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. PIC microcontrollers use a RISC architecture optimized for deterministic instruction execution and very low power consumption. The PIC16F18424 belongs to the enhanced mid-range 8-bit core family and adds CIPs that offload tasks like waveform generation, signal conditioning, and complementary output control without CPU intervention. Positioned in the hierarchy MCU -> microcontroller -> embedded controller -> semiconductor, this device targets battery-powered and space-constrained designs.
Key specifications include a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWMs, a Complementary Waveform Generator (CWG), an EUSART plus SPI/I2C peripherals, and Functional Safety (FuSa) support for safety-critical applications. The integrated Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to any I/O pin, simplifying PCB layout in small 16-pin packages.
The 16-UQFN package measures just 4x4 mm, suiting wearables, sensor nodes, and handheld instruments. The XLP Sleep mode draws under 50 nA typical, and the device offers multiple low-power operating modes such as Doze, Idle, and Sleep with peripheral operation using the LFINTOSC or the 16 MHz HFINTOSC.
Typical applications include IoT sensor nodes, battery-powered environmental monitors, LED lighting controllers, automotive body electronics, home appliance user interfaces, and low-power industrial sensor transmitters. Functional Safety support makes it a fit for auxiliary safety subsystems.
When designing, place a 0.1 µF decoupling capacitor close to VDD and ensure the ICSP™/ICD pins are accessible for in-circuit programming and debug. Use PPS to route peripherals to convenient pins, and select the appropriate oscillator mode to balance wake-up time against quiescent current.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, organized for engineers comparing the PIC16F18424-E/JQ against other 8-bit and low-pin-count MCU options.
کے لیے ڈراپ اِن متبادل PIC16F18424-E/JQ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F18424-E/JQ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Core Architecture, Package, Operating Temperature, Program Memory (Flash).
PIC16F18426-E/JQ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F18324-E/JQ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F18425-E/JQ
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F18444-E/JQ
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F1825-I/JQ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F18424-E/JQ زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | PIC 8-bit enhanced mid-range |
| Family | PIC16(L)F184xx (XLP, Functional Safety) |
| Program Memory (Flash) | 7 KB (4K x 14 words) |
| SRAM | 512 B |
| Max CPU Speed | 32 MHz |
| Supply Voltage (VDD) | 2.5 V to 5.5 V |
| آپریٹنگ درجہ حرارت | -40 °C to +125 °C (E = Extended) |
| پیکیج | 16-UQFN (4x4 mm) |
| پن کی تعداد | 16 |
| ADC | 12-bit ADC with Computation (ADCC) |
| DAC | 5-bit DAC |
| PWM Channels | 2 (10-bit) |
| Complementary Waveform Generator (CWG) | Yes |
| Comparators | Yes |
| Communication | EUSART, SPI, I2C |
| Peripheral Pin Select (PPS) | Yes |
| Functional Safety (FuSa) | Yes |
| RoHS اسٹیٹس | Compliant |
PIC16F18424-E/JQ پن کنفیگریشن
| پن 1 | RA5 — GPIO/Analog (PPS) |
| پن 2 | RA4 — GPIO/Analog (PPS) |
| پن 3 | RA3/MCLR — GPIO or Master Clear (reset) |
| پن 4 | RA2 — GPIO/Analog (PPS) |
| پن 5 | RA1 — GPIO/Analog/ICSPDAT (PPS) |
| پن 6 | RA0 — GPIO/Analog/ICSPCLK (PPS) |
| پن 7 | VSS — Ground |
| پن 8 | RB7 — GPIO/ICSPDAT (PPS) |
| پن 9 | RB6 — GPIO/ICSPCLK (PPS) |
| پن 10 | RB5 — GPIO/Analog (PPS) |
| پن 11 | RB4 — GPIO/Analog (PPS) |
| پن 12 | RB3 — GPIO (PPS) |
| پن 13 | RB2 — GPIO (PPS) |
| پن 14 | RB1 — GPIO/Analog (PPS) |
| پن 15 | RB0 — GPIO/Analog (PPS) |
| پن 16 | VDD — Positive supply voltage |
عام استعمالات
PIC16F18424-E/JQ کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered IoT Sensor Node, Automotive Body Electronics, LED Lighting Controller, Home Appliance User Interface, Industrial Sensor Transmitter, Consumer Remote Control / HMI.
Battery-Powered IoT Sensor Node
The PIC16F18424-E/JQ is well suited to battery-powered IoT sensor nodes thanks to its XLP Sleep mode drawing under 50 nA typical, 32 MHz HFINTOSC for fast wake-and-measure cycles, and 12-bit ADCC for direct sensor digitization. With 7 KB Flash and 512 B RAM, firmware can implement sensor calibration, sleep scheduling, and EUSART/SPI/I2C reporting without external components. The 4x4 mm 16-UQFN package leaves room for coin-cell holders and antenna keep-out on space-constrained sensor PCBs.
تجویز کردہ
Automotive Body Electronics
The PIC16F18424-E/JQ is qualified for the -40 °C to +125 °C extended automotive temperature range and offers Functional Safety (FuSa) support, making it appropriate for body-electronics subsystems such as lighting controllers, mirror adjusters, and seat modules. Its Complementary Waveform Generator (CWG) drives half-bridges for LED dimming and small motor control without CPU overhead, while PPS allows flexible pin routing inside tight 16-pin PCBAs. The 2.5 V to 5.5 V supply range aligns with automotive 5 V rails directly.
تجویز کردہ
LED Lighting Controller
For LED lighting and architectural illumination, the PIC16F18424-E/JQ delivers two 10-bit PWM channels plus a Complementary Waveform Generator (CWG) for driving half-bridge FETs with programmable dead-time. The 12-bit ADCC can sample light sensors for closed-loop brightness control, while EUSART/SPI/I2C peripherals interface with DMX, DALI, or wireless modules. The 16-UQFN package and 32 MHz clock allow compact form-factor drivers for bulbs, strips, and downlights.
تجویز کردہ
Home Appliance User Interface
In washing machines, coffee makers, and kitchen appliances, the PIC16F18424-E/JQ handles capacitive touch sensing, LED indicators, and rotary encoder input through its CWG and comparators. The 7 KB Flash accommodates state-machine firmware for user-interface logic, and 512 B RAM is sufficient for keypad buffering and display refresh. PPS enables optimal pin assignment for front-panel PCBs with mixed signal and power domains.
تجویز کردہ
Industrial Sensor Transmitter
The PIC16F18424-E/JQ's 12-bit ADCC with computation integrates averaging and oversampling for 4-20 mA loop and bridge-sensor front ends, while the 5-bit DAC supports calibration voltage generation. The extended -40 °C to +125 °C range suits outdoor industrial installations, and the EUSART provides RS-485 connectivity with external transceivers. XLP Sleep mode allows multi-year battery life on remote telemetry units.
تجویز کردہ
Consumer Remote Control / HMI
The PIC16F18424-E/JQ integrates all peripherals required for low-cost infrared remote controls and simple human-machine interfaces: comparators for IR receiver signal conditioning, timers for carrier generation, and PWMs for backlight or buzzer drive. With 7 KB Flash it supports multiple protocol stacks, and XLP Sleep under 50 nA extends coin-cell life across years of standby. The 4x4 mm UQFN fits behind membrane keypads in handheld form factors.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F18424-E/JQ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F18426-E/JQ | PIC16F18324-E/JQ | PIC16F18425-E/JQ | PIC16F18444-E/JQ | PIC16F1825-I/JQ |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 16-UQFN (4x4 mm) | 16-UQFN (4x4 mm) - same | 16-UQFN (4x4 mm) - same | 16-UQFN (4x4 mm) - same | 16-UQFN (4x4 mm) - same | 16-UQFN (4x4 mm) - same |
| Flash Memory | 7 KB | 14 KB | 4 KB | 14 KB | 14 KB | 14 KB |
| SRAM | 512 B | 1 KB | 256 B | 1 KB | 1 KB | 1 KB |
| Max Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Supply Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 1.8 V to 5.5 V |
| Functional Safety (FuSa) | Yes | Yes | No | Yes | Yes | No |
| ADC | 12-bit ADCC | 12-bit ADCC | 10-bit ADC | 12-bit ADCC | 12-bit ADCC | 10-bit ADC |
اہم امتیازی خصوصیات
- Functional Safety (FuSa) support in 16-pin UQFN (بمقابلہPIC16F18324-E/JQ)
- 12-bit ADCC with computation hardware (بمقابلہPIC16F1825-I/JQ)
- Upward migration to PIC16F18426 in same footprint (بمقابلہPIC16F18426-E/JQ)
ڈیزائن نوٹس
Place a 0.1 µF decoupling capacitor as close as possible to the VDD pin (pin 16) with a trace length under 5 mm. Add a bulk 1-10 µF capacitor near the regulator output. In battery designs, use XLP Sleep mode with HFINTOSC disabled; wake via Watchdog Timer or IOC to minimize Sleep current. Estimated Sleep current based on PIC16F184xx family typical specifications is under 50 nA with RTC running.
The 16-UQFN (4x4 mm) has an exposed thermal pad that should be soldered to a copper pad tied to VSS for mechanical strength and thermal dissipation. Route ICSPCLK and ICSPDAT (RA0/RA1) to a 2x3 0.1 inch header or pogo-pad footprint for in-circuit programming and debug. Use PPS to assign peripherals to convenient pins and keep high-speed traces short.
Do not confuse PIC16F18424 with PIC16LF18424: the F variant operates 2.5 V to 5.5 V, while the LF variant is 1.8 V to 3.6 V. MCLR on RA3 is enabled by default in configuration bits; if used as GPIO, disable MCLR via CONFIG3. PPS must be unlocked before remapping; failing to do so produces silent peripheral failures. Always verify configuration bits in MPLAB X before programming production parts.
تعمیل کی معلومات
PIC16F18424-E/JQ is RoHS compliant and lead-free per Microchip product environmental compliance data. The 'E' temperature grade covers -40 C to +125 C extended automotive range; AEC-Q100 qualification status is part-specific - verify with Microchip for the exact ordering code.
