PIC16F723-E/ML - 8-Bit 7KB Flash MCU | Microchip Technology
MPN: PIC16F723-E/ML ✓ فعالPIC16F723-E/ML جائزہ
A microcontroller is a programmable semiconductor that integrates a CPU, program memory, data memory, peripherals, and input/output ports onto one device. The PIC16F723 belongs to the PIC16 (L)F722/3/4/6/7 family of flash MCUs and occupies the application-control hierarchy above basic logic ICs while below more complex microprocessors. Its 8-bit architecture simplifies peripheral control, digital sequencing, sensor acquisition, and communication tasks in cost-sensitive embedded equipment.
Key features include 7 KB of flash program memory, an 8-bit CPU, an internal 16 MHz oscillator, and nanoWatt XLP technology for low-power operation. The 28-VQFN exposed-pad package supports compact PCB layouts and improved thermal dissipation when the exposed pad is connected to the appropriate ground plane. The -E temperature-grade suffix identifies this ordering variant for applications requiring an extended temperature range, while -/ML denotes the 28-pin QFN package format.
The device architecture combines a flash-programmable PIC16 core with integrated low-power operating modes and conventional embedded peripherals. Its internal oscillator eliminates the need for an external clock in many designs, reducing component count and simplifying PCB assembly. Because firmware determines peripheral behavior, the same MCU family can support different sensing, control, and actuator functions without changing the physical package.
Typical applications include industrial control modules, low-power sensor nodes, building automation interfaces, compact power converters, appliance controllers, LED lighting systems, and communications equipment. The flash memory allows firmware updates and configuration retention, while the low-power architecture is particularly useful in systems that spend substantial time in sleep or idle states.
When designing a PCB, provide a low-impedance ground plane and connect the exposed pad according to the package land pattern and thermal guidance. Confirm oscillator, I/O, programming, and peripheral requirements against the manufacturer pin-description table because multifunction pins can constrain boot, serial programming, or mixed-signal assignments.
This page combines the manufacturer product information, ordering-code distinctions, package details, practical layout guidance, and validated family comparisons to support faster component selection and PCB planning for the PIC16F723-E/ML.
کے لیے ڈراپ اِن متبادل PIC16F723-E/ML — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16F723-E/ML (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature, ADC, Timers, I/O Pins.
PIC16F723-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F723A-E/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F723A-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F723AT-E/ML
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC16F724-E/ML
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F723-E/ML زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | 8-bit flash microcontroller |
| Program Memory | 7 KB |
| Program Memory Organization | 4K x 14 words |
| Maximum CPU Frequency | 20 MHz |
| Internal Oscillator Frequency | 16 MHz |
| Internal Oscillator Operating Range | 18 V to 55 V |
| Low-Power Technology | nanoWatt XLP |
| پیکیج | 28-pin VQFN with exposed pad |
| Package Dimensions | 6 x 6 mm |
| ماؤنٹنگ ٹائپ | Surface mount |
| Temperature Grade | Extended temperature grade |
PIC16F723-E/ML پن کنفیگریشن
| پن 1 | MCLR/VPP/RE3 — Programming voltage input, master clear input, and digital input |
| پن 2 | RA0/AN0 — Digital input/output and analog input |
| پن 3 | RA1/AN1 — Digital input/output and analog input |
| پن 4 | RA2/AN2/VREF-/CVREF — Digital input/output, analog input, and reference function |
| پن 5 | RA3/AN3/VREF+/C1OUT — Digital input/output, analog input, reference input, and comparator output |
| پن 6 | RA4/T0CKI — Digital input/output and timer clock input |
| پن 7 | RA5/AN4/SS — Digital input/output, analog input, and synchronous serial interface select |
| پن 8 | VSS — Ground reference |
| پن 9 | RA7/OSC1/CLKIN — Digital input/output, oscillator input, and external clock input |
| پن 10 | RA6/OSC2/CLKOUT — Digital input/output, oscillator output, and clock output |
| پن 11 | RC0/T1OSO — Digital input/output and timer oscillator output |
| پن 12 | RC1/T1OSC/CCP2 — Digital input/output, timer oscillator input, and capture/compare PWM output |
| پن 13 | RC2/P1A/CCP1 — Digital input/output, PWM output, and capture/compare PWM output |
| پن 14 | RC3/SCK/SCL — Digital input/output, synchronous clock, and I2C clock |
| پن 15 | RC4/SDI/SDA — Digital input/output, serial data input, and I2C data |
| پن 16 | RC5/SDO — Digital input/output and synchronous serial data output |
| پن 17 | RC6/TX/CK — Digital input/output, asynchronous serial transmit, and synchronous clock |
| پن 18 | RC7/RX/DT — Digital input/output, asynchronous serial receive, and synchronous data |
| پن 19 | VSS — Ground reference |
| پن 20 | VDD — Positive supply voltage |
| پن 21 | RB0/AN8 — Digital input/output and analog input |
| پن 22 | RB1/AN9 — Digital input/output and analog input |
| پن 23 | RB2/AN10 — Digital input/output and analog input |
| پن 24 | RB3/AN11 — Digital input/output and analog input |
| پن 25 | RB4/AN12 — Digital input/output and analog input |
| پن 26 | RB5/AN13 — Digital input/output and analog input |
| پن 27 | RB6/ICSPCLK — Digital input/output and in-circuit serial programming clock |
| پن 28 | RB7/ICSPDAT — Digital input/output and in-circuit serial programming data |
عام استعمالات
PIC16F723-E/ML کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor and Control Node, Building Automation and HVAC Control, LED Lighting and Display Controller, Compact Power-Supply Controller, Appliance and Embedded Control Module, Battery-Powered IoT Sensor.
Industrial Sensor and Control Node
The PIC16F723-E/ML fits compact industrial sensor nodes that require deterministic 8-bit control, local decision logic, and low-power operation. Its 7 KB of flash program memory can hold acquisition routines, calibration data, communications handlers, and device-specific configuration logic. The 16 MHz internal oscillator removes the need for a separate clock component in many designs, helping reduce board size and assembly cost. For battery-powered installations, firmware can place the device in a nanoWatt XLP sleep state between measurements. The 28-VQFN exposed-pad package also allows a compact layout, but the ground connection and thermal design must follow the manufacturer land pattern. Validate sensor timing and communication behavior across the complete product temperature range before production.
تجویز کردہ
Building Automation and HVAC Control
PIC16F723-E/ML is appropriate for building-control modules that coordinate digital inputs, relay outputs, status indicators, and periodic communication. The 7 KB flash capacity supports a bootloader, application logic, configuration tables, and field-update routines in one economical device. With an 8-bit PIC16 core and a 16 MHz internal oscillator, the MCU can execute protocol and debounce tasks without an external crystal. Low-power operation is useful in thermostats, occupancy controls, and HVAC interface modules that spend much of their time idle. Designers should assign multiplexed I/O pins according to the manufacturer pin-description table and preserve programming access. The exposed pad should be tied to ground through the recommended PCB land pattern to support stable operation in compact control boxes.
تجویز کردہ
LED Lighting and Display Controller
The PIC16F723-E/ML can control addressable or multiplexed LED lighting modules where compactness, low standby power, and flexible sequencing are important. Its flash memory can hold lighting scenes, animation tables, calibration values, and communication protocols, while the integrated oscillator simplifies board design. PWM-capable outputs can be allocated through the package pinout for dimming or timing functions, subject to the device’s peripheral assignments. In a display-control module, the microcontroller can also supervise buttons, indicators, and communication transceivers. Because several port pins may support alternate functions, establish pin ownership before assigning LEDs and serial interfaces. Validate brightness consistency, update rate, and standby consumption using the final driver topology and enclosure rather than the bare MCU.
تجویز کردہ
Compact Power-Supply Controller
PIC16F723-E/ML is useful in small supervisory or auxiliary power modules where a microcontroller must monitor operating conditions, sequence loads, update indicators, and report faults. The 7 KB flash space is sufficient for a compact supervisory state machine, parameter storage, and a serial status protocol, while the 16 MHz internal oscillator supports timely digital control without a separate timing component. Its low-power capability helps reduce standby demand in adapters and offline power-conversion products. The MCU should be placed where its supply, ground, and exposed-pad connections comply with the manufacturer’s layout guidance. Use the pin-description table to separate sensitive measurement functions from switching-node routing, and confirm whether any new firmware, timing, or safety validation is required when replacing another controller.
تجویز کردہ
Appliance and Embedded Control Module
The PIC16F723-E/ML suits appliance controllers that combine button input, motor or relay sequencing, status indication, and fault handling in a cost-sensitive embedded platform. Its 8-bit architecture is straightforward for deterministic control logic, and the 7 KB flash area can retain an application state machine plus configuration and diagnostic routines. The internal 16 MHz oscillator supports high clock accuracy relative to many RC-only consumer solutions while avoiding an external crystal. For motor, heater, or mains-connected equipment, keep switching and high-energy circuitry physically separated from sensitive MCU traces and provide proper isolation. The compact 28-VQFN package reduces board area, but manufacturing should verify pad geometry, solderability, and the exposed-pad ground process before volume production.
تجویز کردہ
Battery-Powered IoT Sensor
PIC16F723-E/ML can serve as the local controller in a battery-powered IoT sensor that periodically samples inputs, evaluates thresholds, and transmits results. Its nanoWatt XLP architecture supports low-duty-cycle operation, and the internal 16 MHz oscillator can eliminate an external crystal while keeping the circuit compact. Seven kilobytes of flash provides room for the sensor driver, protocol stack, and application state machine, although the final firmware budget must be checked. Use sleep-mode wake-up and duty-cycle calculations to estimate average current rather than assuming continuous-operation consumption. The exposed pad should connect to a continuous ground plane with thermal vias when required, and antenna or radio circuitry should remain isolated from sensitive MCU and clock routing to reduce unintended coupling.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16F723-E/ML — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16F723-I/ML | PIC16F723A-E/ML | PIC16F723A-I/ML | PIC16F723AT-E/ML | PIC16F724-E/ML |
|---|---|---|---|---|---|---|
| Package | 28-VQFN with exposed pad | 28-VQFN | 28-QFN (6x6) | 28-QFN (6x6) | 28-VQFN | 28-VQFN |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC16 | 8-bit PIC16 | 8-bit PIC16 | 8-bit PIC16 | 8-bit PIC16 | 8-bit PIC16 |
| Ordering Temperature Grade | -E extended-temperature grade | -I industrial-temperature grade | -E extended-temperature grade | -I industrial-temperature grade | -E extended-temperature grade with T designation | -E extended-temperature grade |
| Device Revision | Base PIC16F723 revision | Base revision | A revision | A revision | A revision | Different PIC16F72x family member |
اہم امتیازی خصوصیات
- Combines extended-temperature ordering with a compact exposed-pad package (بمقابلہPIC16F723-I/ML)
- Shares the 7 KB flash and 20 MHz performance class with the A revision (بمقابلہPIC16F723A-E/ML)
- Uses an integrated 16 MHz oscillator with an 18 V to 55 V internal operating range (بمقابلہPIC16F723A-E/ML)
- Provides the same 7 KB program-memory class as PIC16F724-E/ML (بمقابلہPIC16F724-E/ML)
ڈیزائن نوٹس
Use the manufacturer’s 28-VQFN land pattern and connect the exposed pad to a low-impedance ground plane. Place the pad’s thermal vias directly beneath the package while keeping them clear of sensitive signal routes. Confirm copper balance, solder mask definition, and assembly-process capability during PCB fabrication review. The exposed pad is a thermal and electrical land, not an optional mechanical feature.
Assign ports from the pin-description table before fixing the PCB because several PIC16F723 pins support alternate peripheral functions. Preserve the dedicated programming functions on RB6/ICSPCLK and RB7/ICSPDAT, and avoid routing fast or switching signals beneath the MCU footprint. Place decoupling and bulk capacitance close to the VDD and VSS pins using the application circuit recommended by Microchip.
The internal oscillator operates across the specified 18 V to 55 V range, but the complete device supply limits must be checked in the manufacturer datasheet. Validate startup, brownout behavior, sleep current, and active current in the final power architecture. For low-power products, calculate average consumption from the actual duty cycle and selected sleep mode rather than relying on a single operating-current value.
Do not substitute an ordering code based only on the shared -/ML package suffix. The -E and -I temperature grades, A device revision, and T designation can affect qualification or selection criteria. Compare the current Microchip datasheet, device revision status, errata, pin functions, and programming requirements before approving a drop-in replacement.
تعمیل کی معلومات
The product status is listed as in production. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified in the manufacturer page excerpts.