Microchip Technology

PIC16F723-E/ML - 8-Bit 7KB Flash MCU | Microchip Technology

MPN: PIC16F723-E/ML ✓ Active
28-pin VQFN with exposed pad Package 20 MHz Speed 7 KB Memory
MOQ: 1 |

PIC16F723-E/ML Overview

The Microchip Technology PIC16F723-E/ML is an 8-bit PIC16-series flash microcontroller with 7 KB of program memory, nanoWatt XLP low-power technology, and a 28-pin VQFN package with an exposed pad. It operates from a 16 MHz internal oscillator, with an 18 V to 55 V internal oscillator operating range, and is suited to compact embedded-control products requiring economical flash storage, low-power operation, and a small surface-mount footprint.

A microcontroller is a programmable semiconductor that integrates a CPU, program memory, data memory, peripherals, and input/output ports onto one device. The PIC16F723 belongs to the PIC16 (L)F722/3/4/6/7 family of flash MCUs and occupies the application-control hierarchy above basic logic ICs while below more complex microprocessors. Its 8-bit architecture simplifies peripheral control, digital sequencing, sensor acquisition, and communication tasks in cost-sensitive embedded equipment.

Key features include 7 KB of flash program memory, an 8-bit CPU, an internal 16 MHz oscillator, and nanoWatt XLP technology for low-power operation. The 28-VQFN exposed-pad package supports compact PCB layouts and improved thermal dissipation when the exposed pad is connected to the appropriate ground plane. The -E temperature-grade suffix identifies this ordering variant for applications requiring an extended temperature range, while -/ML denotes the 28-pin QFN package format.

The device architecture combines a flash-programmable PIC16 core with integrated low-power operating modes and conventional embedded peripherals. Its internal oscillator eliminates the need for an external clock in many designs, reducing component count and simplifying PCB assembly. Because firmware determines peripheral behavior, the same MCU family can support different sensing, control, and actuator functions without changing the physical package.

Typical applications include industrial control modules, low-power sensor nodes, building automation interfaces, compact power converters, appliance controllers, LED lighting systems, and communications equipment. The flash memory allows firmware updates and configuration retention, while the low-power architecture is particularly useful in systems that spend substantial time in sleep or idle states.

When designing a PCB, provide a low-impedance ground plane and connect the exposed pad according to the package land pattern and thermal guidance. Confirm oscillator, I/O, programming, and peripheral requirements against the manufacturer pin-description table because multifunction pins can constrain boot, serial programming, or mixed-signal assignments.

This page combines the manufacturer product information, ordering-code distinctions, package details, practical layout guidance, and validated family comparisons to support faster component selection and PCB planning for the PIC16F723-E/ML.

Drop-in alternatives for PIC16F723-E/ML — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with PIC16F723-E/ML (same form factor and footprint) — differing in Package, Operating Temperature, ADC, Timers, I/O Pins.

Microchip Technology
Package: 28-pin UQFN (ML), 5 x 5 mm, 0.5 mm pitch
Operating Temperature: -40 C to +125 C (Extended, -E)
ADC: 8-bit, 11 channels
Microchip Technology
Package: 28-QFN (6 x 6 mm)
Microchip Technology
Package: 28-pin QFN (6 x 6 mm) with exposed pad
Operating Temperature: -40 C to +125 C (industrial)
ADC: 12-channel, 8-bit
Microchip Technology
Package: 28-pin QFN (ML), 6x6 mm
Operating Temperature: -40C to +85C (industrial, -I)
ADC: 11 channels, 8-bit
Microchip Technology
Package: UQFN-44 (ML) 5x5 mm, 0.50 mm pitch
Operating Temperature: -40C to +125C (E suffix)
ADC: 8-bit, 14 channels
Microchip Technology
Package: 44-pin QFN (8x8 mm) with exposed pad
Operating Temperature: -40 C to +125 C (Extended, "E")
ADC: 8-bit, 14 channels

PIC16F723-I/ML

✅ Drop-In
Microchip Technology
📦 28-VQFN
8-bit flash microcontroller · 20 MHz · 7 KB Flash (4K x 14 words) · 2.5 V to 5 V · 16 MHz · 28-QFN (6 x 6 mm) · Surface mount · Industrial temperature

Contact for price

View Datasheet →

PIC16F723A-E/ML

✅ Drop-In
Microchip Technology
📦 28-VQFN
8-bit Microcontroller (MCU) · PIC16 enhanced mid-range RISC (Harvard) · 49 instructions, 14-bit width, 200 ns instruction cycle · 7 KB Flash (4K x 14), self-programmable · 192 bytes · 128 bytes · 20 MHz · 2.5 V to 5.5 V

Contact for price

View Datasheet →

PIC16F723A-I/ML

✅ Drop-In
Microchip Technology
📦 28-VQFN
PIC16F (mid-range 8-bit, RISC) · PIC16, 14-bit instruction, Harvard architecture · 20 MHz (200 ns instruction cycle) · 7 KB · 192 bytes · 256 bytes · 1.8 V to 5.5 V · 25 (max)

Contact for price

View Datasheet →

PIC16F723AT-E/ML

✅ Drop-In
📦 28-VQFN
Uses the same 28-VQFN footprint with the A revision and T ordering designation

📋 Reference alternative (not in catalog)

PIC16F724-E/ML

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 28-VQFN
8-bit PIC RISC (35 instructions) · 7 KB · 192 bytes · 256 bytes · 20 MHz · 2.5 V to 5.5 V · 36 · 8-bit, 14 channels

Contact for price

View Datasheet →

PIC16F723-E/ML Maximum Ratings & Electrical Characteristics

Device Type 8-bit flash microcontroller
Program Memory 7 KB
Program Memory Organization 4K x 14 words
Maximum CPU Frequency 20 MHz
Internal Oscillator Frequency 16 MHz
Internal Oscillator Operating Range 18 V to 55 V
Low-Power Technology nanoWatt XLP
Package 28-pin VQFN with exposed pad
Package Dimensions 6 x 6 mm
Mounting Type Surface mount
Temperature Grade Extended temperature grade

PIC16F723-E/ML Pin Configuration

QFN-28 Package Pinout Diagram QFN-28 5x5mm, P0.5mm, EP 3.1x3.1mm, JEDEC MO-220. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 QFN-28
Pin 1 MCLR/VPP/RE3 — Programming voltage input, master clear input, and digital input
Pin 2 RA0/AN0 — Digital input/output and analog input
Pin 3 RA1/AN1 — Digital input/output and analog input
Pin 4 RA2/AN2/VREF-/CVREF — Digital input/output, analog input, and reference function
Pin 5 RA3/AN3/VREF+/C1OUT — Digital input/output, analog input, reference input, and comparator output
Pin 6 RA4/T0CKI — Digital input/output and timer clock input
Pin 7 RA5/AN4/SS — Digital input/output, analog input, and synchronous serial interface select
Pin 8 VSS — Ground reference
Pin 9 RA7/OSC1/CLKIN — Digital input/output, oscillator input, and external clock input
Pin 10 RA6/OSC2/CLKOUT — Digital input/output, oscillator output, and clock output
Pin 11 RC0/T1OSO — Digital input/output and timer oscillator output
Pin 12 RC1/T1OSC/CCP2 — Digital input/output, timer oscillator input, and capture/compare PWM output
Pin 13 RC2/P1A/CCP1 — Digital input/output, PWM output, and capture/compare PWM output
Pin 14 RC3/SCK/SCL — Digital input/output, synchronous clock, and I2C clock
Pin 15 RC4/SDI/SDA — Digital input/output, serial data input, and I2C data
Pin 16 RC5/SDO — Digital input/output and synchronous serial data output
Pin 17 RC6/TX/CK — Digital input/output, asynchronous serial transmit, and synchronous clock
Pin 18 RC7/RX/DT — Digital input/output, asynchronous serial receive, and synchronous data
Pin 19 VSS — Ground reference
Pin 20 VDD — Positive supply voltage
Pin 21 RB0/AN8 — Digital input/output and analog input
Pin 22 RB1/AN9 — Digital input/output and analog input
Pin 23 RB2/AN10 — Digital input/output and analog input
Pin 24 RB3/AN11 — Digital input/output and analog input
Pin 25 RB4/AN12 — Digital input/output and analog input
Pin 26 RB5/AN13 — Digital input/output and analog input
Pin 27 RB6/ICSPCLK — Digital input/output and in-circuit serial programming clock
Pin 28 RB7/ICSPDAT — Digital input/output and in-circuit serial programming data

Typical Applications

PIC16F723-E/ML is suitable for 6 applications: Industrial Sensor and Control Node, Building Automation and HVAC Control, LED Lighting and Display Controller, Compact Power-Supply Controller, Appliance and Embedded Control Module, Battery-Powered IoT Sensor.

🏭

Industrial Sensor and Control Node

The PIC16F723-E/ML fits compact industrial sensor nodes that require deterministic 8-bit control, local decision logic, and low-power operation. Its 7 KB of flash program memory can hold acquisition routines, calibration data, communications handlers, and device-specific configuration logic. The 16 MHz internal oscillator removes the need for a separate clock component in many designs, helping reduce board size and assembly cost. For battery-powered installations, firmware can place the device in a nanoWatt XLP sleep state between measurements. The 28-VQFN exposed-pad package also allows a compact layout, but the ground connection and thermal design must follow the manufacturer land pattern. Validate sensor timing and communication behavior across the complete product temperature range before production.

🏠

Building Automation and HVAC Control

PIC16F723-E/ML is appropriate for building-control modules that coordinate digital inputs, relay outputs, status indicators, and periodic communication. The 7 KB flash capacity supports a bootloader, application logic, configuration tables, and field-update routines in one economical device. With an 8-bit PIC16 core and a 16 MHz internal oscillator, the MCU can execute protocol and debounce tasks without an external crystal. Low-power operation is useful in thermostats, occupancy controls, and HVAC interface modules that spend much of their time idle. Designers should assign multiplexed I/O pins according to the manufacturer pin-description table and preserve programming access. The exposed pad should be tied to ground through the recommended PCB land pattern to support stable operation in compact control boxes.

💡

LED Lighting and Display Controller

The PIC16F723-E/ML can control addressable or multiplexed LED lighting modules where compactness, low standby power, and flexible sequencing are important. Its flash memory can hold lighting scenes, animation tables, calibration values, and communication protocols, while the integrated oscillator simplifies board design. PWM-capable outputs can be allocated through the package pinout for dimming or timing functions, subject to the device’s peripheral assignments. In a display-control module, the microcontroller can also supervise buttons, indicators, and communication transceivers. Because several port pins may support alternate functions, establish pin ownership before assigning LEDs and serial interfaces. Validate brightness consistency, update rate, and standby consumption using the final driver topology and enclosure rather than the bare MCU.

⚡

Compact Power-Supply Controller

PIC16F723-E/ML is useful in small supervisory or auxiliary power modules where a microcontroller must monitor operating conditions, sequence loads, update indicators, and report faults. The 7 KB flash space is sufficient for a compact supervisory state machine, parameter storage, and a serial status protocol, while the 16 MHz internal oscillator supports timely digital control without a separate timing component. Its low-power capability helps reduce standby demand in adapters and offline power-conversion products. The MCU should be placed where its supply, ground, and exposed-pad connections comply with the manufacturer’s layout guidance. Use the pin-description table to separate sensitive measurement functions from switching-node routing, and confirm whether any new firmware, timing, or safety validation is required when replacing another controller.

🔧

Appliance and Embedded Control Module

The PIC16F723-E/ML suits appliance controllers that combine button input, motor or relay sequencing, status indication, and fault handling in a cost-sensitive embedded platform. Its 8-bit architecture is straightforward for deterministic control logic, and the 7 KB flash area can retain an application state machine plus configuration and diagnostic routines. The internal 16 MHz oscillator supports high clock accuracy relative to many RC-only consumer solutions while avoiding an external crystal. For motor, heater, or mains-connected equipment, keep switching and high-energy circuitry physically separated from sensitive MCU traces and provide proper isolation. The compact 28-VQFN package reduces board area, but manufacturing should verify pad geometry, solderability, and the exposed-pad ground process before volume production.

🧩

Battery-Powered IoT Sensor

PIC16F723-E/ML can serve as the local controller in a battery-powered IoT sensor that periodically samples inputs, evaluates thresholds, and transmits results. Its nanoWatt XLP architecture supports low-duty-cycle operation, and the internal 16 MHz oscillator can eliminate an external crystal while keeping the circuit compact. Seven kilobytes of flash provides room for the sensor driver, protocol stack, and application state machine, although the final firmware budget must be checked. Use sleep-mode wake-up and duty-cycle calculations to estimate average current rather than assuming continuous-operation consumption. The exposed pad should connect to a continuous ground plane with thermal vias when required, and antenna or radio circuitry should remain isolated from sensitive MCU and clock routing to reduce unintended coupling.

What are the key specifications of PIC16F723-E/ML that engineers should know?
The PIC16F723-E/ML is an 8-bit flash microcontroller with 7 KB of program memory, a maximum CPU frequency of 20 MHz, a 16 MHz internal oscillator, and a 28-VQFN package with an exposed pad. According to the Microchip PIC16 (L)F722/3/4/6/7 datasheet, the device also uses nanoWatt XLP technology for low-power designs. Its small exposed-pad package is suitable for compact embedded-control boards.
What is the operating voltage and temperature range of PIC16F723-E/ML?
The PIC16F723-E/ML operates from an 18 V to 55 V internal-oscillator range, while its complete external supply-voltage and temperature limits must be confirmed in the Microchip datasheet. The -E ordering suffix identifies the extended-temperature grade. The 16 MHz internal oscillator removes the need for a separate timing component in applications designed around the specified internal-clock operating range.
Where can I download the PIC16F723-E/ML datasheet PDF?
The PIC16F723-E/ML datasheet is available through the Microchip PIC16F723 product page, which links to the PIC16 (L)F722/3/4/6/7 data sheet. Use the manufacturer document for the complete electrical limits, pin descriptions, memory map, timing diagrams, and package drawing. The manufacturer also provides programming and development support for the PIC16F723 family.
Where can I find the PIC16F723-E/ML pinout and exposed-pad connection?
The PIC16F723-E/ML uses a 28-pin VQFN outline with an exposed thermal pad, and the manufacturer pin-description table defines every I/O and power connection. Use that table to map RA, RB, and RC ports to the package drawing. The exposed pad should be connected to the PCB ground plane using the recommended land pattern and thermal-via arrangement.
Can PIC16F723-I/ML replace PIC16F723-E/ML without changing the PCB?
The PIC16F723-I/ML can fit the same 28-pin QFN footprint, but it is not an automatic functional replacement for the PIC16F723-E/ML. The principal selection issue is operating-temperature grade: the -E variant is specified for extended-temperature operation, while the -I variant is intended for industrial-temperature use. Confirm both temperature limits and all device parameters in the Microchip datasheet before substitution.
What is the difference between PIC16F723-E/ML and PIC16F723A-E/ML?
Both PIC16F723-E/ML and PIC16F723A-E/ML are 28-pin, 7 KB, 20 MHz-class PIC16 flash MCUs in the same QFN package family. The A designation identifies a later device revision, so the correct procedure is to compare the current Microchip datasheets, errata, and device-selection tables. Their shared footprint supports a drop-in board-level review, but firmware and peripheral revisions must also be checked.
PIC16F723-E/ML vs PIC16F723A-I/ML — which should I choose?
Choose PIC16F723-E/ML when the design requires the extended-temperature -E grade, and choose PIC16F723A-I/ML when the A revision and industrial-temperature grade meet the product requirements. Both devices are offered in the 28-QFN format and are described as 8-bit, 20 MHz, 7 KB flash MCUs. Verify revision-specific behavior, qualification requirements, and programming compatibility before finalizing the selection.
When should I choose PIC16F723-E/ML over another PIC16 MCU?
Choose PIC16F723-E/ML when a design needs an 8-bit architecture, 7 KB of flash memory, a 16 MHz internal oscillator, and a compact 28-VQFN footprint with an exposed pad. It is particularly appropriate for low-power embedded controllers using nanoWatt XLP technology. Choose another family member when required RAM, EEPROM, ADC resources, communications peripherals, or package pins differ from this device.
What is the best drop-in replacement for PIC16F723-E/ML?
PIC16F723-I/ML is a same-package candidate for an engineering review because it uses the 28-QFN format, but the temperature-grade difference must be accepted. PIC16F723A-E/ML and PIC16F723A-I/ML are additional same-footprint candidates with a later A revision. No unqualified universal replacement is recommended without checking temperature limits, firmware behavior, qualification, and lifecycle requirements.
Is PIC16F723-E/ML suitable for low-power sensor applications?
Yes, the PIC16F723-E/ML is suitable for many low-power sensor applications because it belongs to the nanoWatt XLP PIC16 family and includes a 16 MHz internal oscillator. The internal clock can reduce external component requirements, while low-power modes can help limit average energy use in periodically reporting sensors. Actual battery life depends on the selected sleep mode, duty cycle, sensor load, and firmware.
Where can I buy PIC16F723-E/ML online?
Use the Request a Quote form on this page to request the PIC16F723-E/ML, current availability, and delivery information. The exact ordering code includes the PIC16F723 base device, -E temperature grade, and -/ML 28-pin QFN package identifier. Confirm that any quotation refers to PIC16F723-E/ML rather than the A revision, I grade, or a different package suffix.
What is the price of PIC16F723-E/ML?
The current commercial price for PIC16F723-E/ML should be obtained through the Request a Quote form on this page because market pricing and quantity can change rapidly. When requesting a quotation, state the required quantity, target date, and whether tape-and-reel packaging is required. The quote team can then confirm the exact ordering code and current lead time.
What is the lead time and stock status of PIC16F723-E/ML?
Current stock, minimum order quantity, and lead time for PIC16F723-E/ML should be confirmed through the Request a Quote form on this page. Microchip lists the PIC16F723 family as in production, which supports long-term sourcing planning, but individual package and temperature-grade availability can differ. Include the required production quantity and schedule in the request.
Can PIC16F723A-E/ML replace PIC16F723-E/ML in an existing design?
PIC16F723A-E/ML is a strong same-footprint replacement candidate for PIC16F723-E/ML because it retains the 28-QFN package, 7 KB flash class, and 20 MHz-class performance. Before replacing the device, compare the A-revision changes, errata, device identification, programming requirements, and lifecycle notes in the Microchip documentation. Existing firmware should be validated in the target application.
What programming tools support PIC16F723-E/ML?
The PIC16F723-E/ML is supported by the PIC16 programming ecosystem, including compatible programmers, debuggers, and the Elnec device programmer listing. According to the Microchip PIC16 (L)F722/3/4/6/7 datasheet and programming documentation, the exact pack, voltage, and interface requirements must match the selected tool. Use the manufacturer’s device-support list to confirm the current programmer configuration.

Engineering reference data for PIC16F723-E/ML — comparison, design guidance, and compliance information.

Selection Guide

Choose PIC16F723-E/ML for a compact 8-bit controller that requires 7 KB of flash, a 16 MHz internal oscillator, nanoWatt XLP operation, and an extended-temperature -E ordering grade. PIC16F723-I/ML is the closest temperature-grade alternative when industrial-temperature limits satisfy the product, but it should not be used where the extended-temperature requirement is mandatory. PIC16F723A-E/ML is appropriate when the later A revision is preferred and the complete revision-specific behavior is acceptable. PIC16F723A-I/ML combines that revision with the -I temperature grade. PIC16F723AT-E/ML can be considered when its T designation is required by the selected ordering or manufacturing process. PIC16F724-E/ML offers a related 28-VQFN and 7 KB flash alternative, but its peripheral set must be checked. Because no validated cross-brand replacement was identified, changing manufacturers requires a full electrical, timing, firmware, and pin-function review rather than a footprint-only decision.

Comparison with Alternatives

Parameter This Product PIC16F723-I/ML PIC16F723A-E/ML PIC16F723A-I/ML PIC16F723AT-E/ML PIC16F724-E/ML
Package 28-VQFN with exposed pad 28-VQFN 28-QFN (6x6) 28-QFN (6x6) 28-VQFN 28-VQFN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Architecture 8-bit PIC16 8-bit PIC16 8-bit PIC16 8-bit PIC16 8-bit PIC16 8-bit PIC16
Ordering Temperature Grade -E extended-temperature grade -I industrial-temperature grade -E extended-temperature grade -I industrial-temperature grade -E extended-temperature grade with T designation -E extended-temperature grade
Device Revision Base PIC16F723 revision Base revision A revision A revision A revision Different PIC16F72x family member

Key Differentiators

  • Combines extended-temperature ordering with a compact exposed-pad package (vs PIC16F723-I/ML)
  • Shares the 7 KB flash and 20 MHz performance class with the A revision (vs PIC16F723A-E/ML)
  • Uses an integrated 16 MHz oscillator with an 18 V to 55 V internal operating range (vs PIC16F723A-E/ML)
  • Provides the same 7 KB program-memory class as PIC16F724-E/ML (vs PIC16F724-E/ML)

Design Notes

Use the manufacturer’s 28-VQFN land pattern and connect the exposed pad to a low-impedance ground plane. Place the pad’s thermal vias directly beneath the package while keeping them clear of sensitive signal routes. Confirm copper balance, solder mask definition, and assembly-process capability during PCB fabrication review. The exposed pad is a thermal and electrical land, not an optional mechanical feature.

Assign ports from the pin-description table before fixing the PCB because several PIC16F723 pins support alternate peripheral functions. Preserve the dedicated programming functions on RB6/ICSPCLK and RB7/ICSPDAT, and avoid routing fast or switching signals beneath the MCU footprint. Place decoupling and bulk capacitance close to the VDD and VSS pins using the application circuit recommended by Microchip.

The internal oscillator operates across the specified 18 V to 55 V range, but the complete device supply limits must be checked in the manufacturer datasheet. Validate startup, brownout behavior, sleep current, and active current in the final power architecture. For low-power products, calculate average consumption from the actual duty cycle and selected sleep mode rather than relying on a single operating-current value.

Do not substitute an ordering code based only on the shared -/ML package suffix. The -E and -I temperature grades, A device revision, and T designation can affect qualification or selection criteria. Compare the current Microchip datasheet, device revision status, errata, pin functions, and programming requirements before approving a drop-in replacement.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The product status is listed as in production. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified in the manufacturer page excerpts.

Related Searches

pic16f723 datasheet PIC16F723-E/ML PIC16F723-E/ML datasheet PIC16F723-E/ML pinout PIC16F723-E/ML datasheet pdf PIC16F723-E/ML equivalent PIC16F723-E/ML replacement PIC16F723-E/ML price PIC16F723-E/ML stock Microchip PIC16F723-E/ML PIC16F723-E/ML QFN28 pinout PIC16F723-E/ML vs PIC16F723A-E/ML

Related Components & Terms

Microchip Technology PIC16F723-E/ML PIC16F723 PIC16F723-I/ML PIC16F723A-E/ML PIC16F723A-I/ML PIC16F723AT-E/ML PIC16F724-E/ML PIC16 8-bit microcontroller flash microcontroller nanoWatt XLP QVFN-28 surface-mount package exposed pad 16 MHz internal oscillator 7 KB flash memory low-power embedded control industrial automation building automation IoT sensor node LED lighting controller appliance controller in-circuit serial programming
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details