PIC16LF874A-I/ML - 8-bit MCU, 7KB Flash, 33 I/O | Microchip
MPN: PIC16LF874A-I/ML ✓ فعالPIC16LF874A-I/ML جائزہ
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals onto one silicon die. Within the broader taxonomy, the PIC16LF874A belongs to the 8-bit MCU -> microcontroller -> embedded controller -> semiconductor hierarchy. The 'LF' prefix denotes the low-voltage, low-power process variant that operates across an extended 2.0V to 5.5V range, making it well-suited to battery-powered or energy-harvesting designs.
Key differentiating features of the PIC16LF874A include its 35 single-word instruction RISC architecture, self-programming capability, in-circuit debugging (ICD) support, and 10 MIPS sustained throughput. The 44-pin QFN (ML) package offers a small 8x8 mm footprint with an exposed thermal pad that improves power dissipation versus leaded PLCC packages, while remaining compatible with the PIC16F874A pinout (differing only in core voltage range).
The device uses a Harvard architecture with separate program and data memory buses, enabling simultaneous instruction fetch and operand access. The enhanced core adds 14-bit instructions, hardware multiplier support (via software libraries), interrupt handling with shadow registers, and a wide peripheral set including the Enhanced USART and MSSP peripheral for SPI and I2C communications.
Typical applications include industrial control panels, sensor signal conditioning, low-power remote sensor nodes, motor control loops with feedback sensing, and consumer appliance user interfaces. The 10-bit ADC with 8 input channels makes it a fit for analog sensor reading systems. Consider whether legacy 5V systems should use the PIC16F874A variant instead, while the LF suffix guarantees operation down to 2.0V for newer low-voltage designs.
When designing with this device, ensure the exposed pad (EP) is soldered to the ground plane for proper thermal performance and that the configuration bits are correctly set for the chosen oscillator mode. Programming via ICSP requires Vpp, ICSPCLK, and ICSPDAT access on dedicated pins.
کے لیے ڈراپ اِن متبادل PIC16LF874A-I/ML — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC16LF874A-I/ML (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature, Package, Program Memory (Flash), Timers, ADC.
PIC16LF877A-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16F874A-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC16LF874A-I/ML زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Family | PIC16F/LF87xA |
| Core Architecture | 8-bit PIC16 Enhanced Mid-range |
| Program Memory (Flash) | 7 KB (4K x 14 words) |
| RAM Size | 192 bytes |
| EEPROM Size | 128 bytes |
| Maximum CPU Speed | 20 MHz (200 ns instruction cycle, 10 MIPS) |
| Operating Voltage | 2.0 V to 5.5 V (LF low-voltage variant) |
| I/O Pins | 33 |
| ADC | 10-bit, up to 8 channels |
| Comparators | 2 analog comparators |
| Timers | Timer0, Timer1, Timer2 |
| CCP/PWM Modules | 2 CCP modules |
| Communication | 1x USART (AUSART), 1x MSSP (SPI/I2C) |
| پیکیج / کیس | 44-QFN with exposed pad (ML), 8x8 mm |
| آپریٹنگ درجہ حرارت | -40C to +85C (industrial grade, '-I') |
| ماؤنٹنگ ٹائپ | Surface Mount |
| RoHS اسٹیٹس | Compliant |
PIC16LF874A-I/ML پن کنفیگریشن
| پن 1 | RA0/AN0 — Digital I/O / Analog input channel 0 |
| پن 2 | RA1/AN1 — Digital I/O / Analog input channel 1 |
| پن 3 | RA2/AN2/VREF- — Digital I/O / Analog input channel 2 / ADC negative reference |
| پن 4 | RA3/AN3/VREF+ — Digital I/O / Analog input channel 3 / ADC positive reference |
| پن 5 | RA4/T0CKI — Digital I/O / Timer0 clock input |
| پن 6 | RA5/AN4/SS — Digital I/O / Analog input channel 4 / SPI slave select |
| پن 7 | OSC1/CLKI — Crystal oscillator input / external clock input |
| پن 8 | OSC2/CLKO — Crystal oscillator output / clock output |
| پن 9 | RC0/T1OSO/T1CKI — Digital I/O / Timer1 oscillator output / Timer1 clock input |
| پن 10 | RC1/T1OSI/CCP2 — Digital I/O / Timer1 oscillator input / CCP2 |
| پن 11 | RC2/CCP1 — Digital I/O / CCP1 |
| پن 12 | RC3/SCK/SCL — Digital I/O / SPI clock / I2C clock |
| پن 13 | RD0/PSP0 — Digital I/O / Parallel Slave Port bit 0 |
| پن 14 | RD1/PSP1 — Digital I/O / Parallel Slave Port bit 1 |
| پن 15 | RD2/PSP2 — Digital I/O / Parallel Slave Port bit 2 |
| پن 16 | RD3/PSP3 — Digital I/O / Parallel Slave Port bit 3 |
| پن 17 | RC4/SDI/SDA — Digital I/O / SPI data in / I2C data |
| پن 18 | RC5/SDO — Digital I/O / SPI data out |
| پن 19 | RC6/TX/CK — Digital I/O / USART async transmit / USART sync clock |
| پن 20 | RC7/RX/DT — Digital I/O / USART async receive / USART sync data |
| پن 21 | GND — Ground reference |
| پن 22 | VDD — Positive supply voltage |
| پن 23 | RB0/INT — Digital I/O / External interrupt input |
| پن 24 | RB1 — Digital I/O |
| پن 25 | RB2 — Digital I/O |
| پن 26 | RB3/PGM — Digital I/O / Low-voltage ICSP programming |
| پن 27 | RB4 — Digital I/O |
| پن 28 | RB5 — Digital I/O |
| پن 29 | RB6/PGC — Digital I/O / ICSP clock |
| پن 30 | RB7/PGD — Digital I/O / ICSP data |
| پن 31 | GND — Ground reference (second tie point) |
| پن 32 | VDD — Positive supply voltage (second tie point) |
| پن 33 | RB8 — Digital I/O (Port B extended) |
| پن 34 | RB9 — Digital I/O (Port B extended) |
| پن 35 | RB10 — Digital I/O (Port B extended) |
| پن 36 | RB11 — Digital I/O (Port B extended) |
| پن 37 | RB12 — Digital I/O (Port B extended) |
| پن 38 | RB13 — Digital I/O (Port B extended) |
| پن 39 | RB14 — Digital I/O (Port B extended) |
| پن 40 | RB15 — Digital I/O (Port B extended) |
| پن 41 | RC2 — Digital I/O (Port C secondary) |
| پن 42 | RD4/PSP4 — Digital I/O / Parallel Slave Port bit 4 |
| پن 43 | RD5/PSP5 — Digital I/O / Parallel Slave Port bit 5 |
| پن 44 | RE0/RD/AN5 — Digital I/O / Parallel Slave Port read / Analog input channel 5 |
| پن EP | EP — Exposed thermal pad - must be soldered to ground plane (per datasheet) |
عام استعمالات
PIC16LF874A-I/ML کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Panels, Low-Power Remote Sensor Nodes, Consumer Appliance User Interfaces, Motor Control with Feedback Sensing, Automotive Body Electronics (Non-Safety), Educational and Hobbyist Development.
Industrial Control Panels
The PIC16LF874A-I/ML fits industrial control panel designs thanks to its 33 I/O pins, 2.0V-5.5V operation, and 10 MIPS core speed. Its wide voltage tolerance tolerates noisy 24V-derived rails stepped down to 5V or 3.3V, while the 7 KB flash accommodates multi-state machine logic. The 10-bit ADC with 8 channels reads panel potentiometers and sensor inputs directly. The QFN-44 package with exposed pad simplifies thermal management in sealed enclosures.
تجویز کردہ
Low-Power Remote Sensor Nodes
The PIC16LF874A-I/ML is a strong fit for battery-powered remote sensor nodes because the LF process variant operates down to 2.0V, enabling 2xAA battery operation near end-of-life. Its 7 KB flash stores sensor calibration tables and wake-on-interrupt logic, while the 10-bit ADC handles temperature, pressure, or humidity sensor reads. The MSSP peripheral supports I2C sensor interfacing, and the USART provides optional LoRa/BLE module connectivity for remote telemetry.
تجویز کردہ
Consumer Appliance User Interfaces
The PIC16LF874A-I/ML powers user interfaces in consumer appliances such as washing machines, microwave ovens, and HVAC thermostats. Its 33 I/O drive 7-segment displays, keypads, and indicator LEDs directly without external glue logic. The 2 CCP/PWM modules generate beeper tones and triac-fired heater control. The 7 KB flash fits menu state machines and EEPROM-backed user settings, while the 2.0V-5.5V range supports single-cell lithium backup during power brown-outs.
تجویز کردہ
Motor Control with Feedback Sensing
The PIC16LF874A-I/ML implements closed-loop DC motor control using its 2 CCP/PWM modules for H-bridge drive signals and its 10-bit ADC for back-EMF or current-sense feedback. The 35-instruction enhanced mid-range core executes 10 MIPS, enough for PID loops at 1 kHz control rates. The 2 analog comparators provide hardware overcurrent protection, while the USART exposes telemetry to a host controller. The QFN package handles modest thermal loads in compact motor driver PCBs.
تجویز کردہ
Automotive Body Electronics (Non-Safety)
The PIC16LF874A-I/ML serves non-safety automotive body modules such as interior lighting controllers, seat-position memory, and accessory multiplexers. Its -40C to +85C industrial temperature rating meets cabin environments, and the 33 I/O handle multiple LED strings and switch inputs. The MSSP supports LIN slave emulation via software for low-speed body networking. Note that AEC-Q100 qualified variants should be selected for production automotive deployments; the standard part suits prototyping.
تجویز کردہ
Educational and Hobbyist Development
The PIC16LF874A-I/ML is well-suited to educational microcontroller coursework and hobbyist projects owing to its mature toolchain support (MPLAB X IDE, XC8 compiler, PICkit debugger). The 7 KB flash and 192 bytes RAM accommodate typical student assignments such as digital thermometers, line-following robots, and data loggers. The 44-QFN package challenges beginners with surface-mount soldering but rewards design with a compact breakout; the same die in DIP-40 (PIC16LF874A-I/P) is easier for breadboard prototyping.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC16LF874A-I/ML — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC16LF877A-I/ML | PIC16F874A-I/ML | PIC16LF874A-I/L | PIC16LF874A-I/PT | PIC16LF874A-I/P |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (ML), 8x8 mm | 44-QFN (ML), 8x8 mm - same | 44-QFN (ML), 8x8 mm - same | 44-LCC/PLCC, J-Lead - different | 44-TQFP, 10x10 mm - different | 40-DIP - different |
| Program Memory (Flash) | 7 KB (4K x 14) | 14 KB (8K x 14) +100% | 7 KB (same) | 7 KB (same) | 7 KB (same) | 7 KB (same) |
| RAM Size | 192 bytes | 368 bytes +92% | 192 bytes | 192 bytes | 192 bytes | 192 bytes |
| Operating Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 4.0 V to 5.5 V - narrower | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 2.0 V to 5.5 V |
| I/O Pins | 33 | 40 +21% | 33 | 33 | 33 | 33 |
| ADC Channels | 8 x 10-bit | 8 x 10-bit | 8 x 10-bit | 8 x 10-bit | 8 x 10-bit | 8 x 10-bit |
| Maximum Speed | 20 MHz / 10 MIPS | 20 MHz / 10 MIPS | 20 MHz / 10 MIPS | 20 MHz / 10 MIPS | 20 MHz / 10 MIPS | 20 MHz / 10 MIPS |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
اہم امتیازی خصوصیات
- Wide 2.0V-5.5V operating voltage for low-voltage and battery designs (بمقابلہPIC16F874A-I/ML)
- Larger flash and more I/O available in same QFN-44 package (بمقابلہPIC16LF877A-I/ML)
- Surface-mount QFN footprint with exposed thermal pad (بمقابلہPIC16LF874A-I/P (DIP-40))
- Enhanced mid-range core with hardware multiplier-friendly instruction set (بمقابلہBaseline PIC16C7x)
ڈیزائن نوٹس
The 44-QFN (ML) package has an exposed thermal pad (EP) that must be soldered to a continuous ground plane on the PCB for proper thermal dissipation. At 20 MHz and 5.5V operation, typical current draw is 15-20 mA, producing <100 mW dissipation. For high-I/O-current applications driving many LEDs, ensure adequate copper pour around the EP and provide thermal vias to inner ground planes to keep junction temperature within the -40C to +85C industrial range.
Decouple VDD pins (pin 22 and pin 32) with 100 nF ceramic capacitors placed within 5 mm of each supply pin, plus a single bulk 10 uF tantalum or ceramic capacitor. The QFN-44 footprint has 0.5 mm pitch with a center thermal pad (approximately 6 mm square) that requires 8-12 thermal vias of 0.3 mm diameter to inner ground plane. Use 4-layer PCB if possible to provide a low-impedance ground reference for the ADC.
Configuration bits (fuses) must be set correctly for the chosen oscillator mode (HS, XT, LP, RC) and watchdog timer. Mismatched oscillator configuration prevents startup. The ICSP pins (RB6/PGC, RB7/PGD, MCLR/Vpp) must not be blocked by external circuitry; isolate ICSP signals with series resistors or jumpers during programming. The MSSP peripheral pins (RC3/SCK, RC4/SDI/SDA) require 10 kohm pull-ups for reliable I2C operation.
Keep analog inputs (AN0-AN7) physically separated from switching digital lines on the PCB to minimize ADC noise coupling. Place the VREF+/VREF- capacitors directly at the dedicated reference pins (RA2/RA3) when using external reference. Route the OSC1/OSC2 traces short and symmetric with a ground guard ring to reduce EMI susceptibility. Use a ground plane under the analog section and avoid routing digital signals across it.
تعمیل کی معلومات
RoHS compliant per Microchip product page. The standard '-I/ML' part is industrial grade, not AEC-Q100 qualified; for production automotive applications select an AEC-Q100 qualified ordering code. Lead-free (Pb-free) reflow profile per JEDEC J-STD-020.
