Microchip Technology

PIC18F4525-E/P - 40MHz 8-Bit 48KB Flash MCU | Microchip

MPN: PIC18F4525-E/P ✓ فعال
40-pin PDIP, 0.600 in (15.24 mm) pitch Package 40 MHz Speed 48 KB enhanced Flash (24K x 16) Memory
MOQ: 1 |

PIC18F4525-E/P جائزہ

The Microchip Technology PIC18F4525-E/P is an 8-bit PIC18 enhanced-flash microcontroller operating up to 40 MHz, with 48 KB of program memory, 3968 bytes of RAM, 36 I/O pins, and a 10-bit analog-to-digital converter in a 40-pin PDIP package. It is offered in the extended-temperature range of -40°C to +125°C and supplied in tubes of 10 units.

A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and I/O in one integrated device. The PIC18F4525 belongs to the PICmicro family of 8-bit RISC microcontrollers, which sit within the broader semiconductor and embedded-control hierarchy. Its combination of enhanced Flash memory, nanoWatt technology, and legacy-compatible through-hole packaging makes it suitable for established industrial, instrumentation, control, and appliance platforms that value deterministic peripheral integration and long-established firmware support.

Key device capabilities include 48 KB of enhanced Flash program memory, 3968 bytes of RAM, 36 general-purpose I/O lines, a 10-bit ADC, and operation to 40 MHz. The -E temperature designation supports operation from -40°C to +125°C, providing a wider temperature range than a conventional commercial-grade selection. Its 40-pin PDIP format also facilitates inspection, rework, prototyping, and through-hole board assembly compared with a fine-pitch surface-mount package.

The device integrates the CPU, Flash program storage, data RAM, timer resources, serial interfaces, interrupt control, and analog conversion functions into one package. Program execution can be driven from multiple internal oscillator options and external clock arrangements, allowing designers to balance timing, power consumption, and system stability. The PIC18 instruction architecture and peripheral model support established PIC development toolchains, while the 10-bit ADC provides sufficient resolution for many industrial measurement and monitoring functions.

Typical applications include industrial control panels, temperature transmitters, data acquisition systems, power-monitoring equipment, motor and relay controllers, laboratory instruments, and embedded products that must operate across extended temperatures. Its 36 I/O pins can support digital inputs, output switching, status indicators, external memory interfaces, communications, and analog sensing. The 10-bit ADC is particularly useful when the application does not require the resolution of a dedicated high-precision converter.

Designers should confirm oscillator, reset, programming, and decoupling arrangements against the manufacturer datasheet before layout. The 40-pin PDIP footprint requires adequate lead spacing and through-hole clearance, while analog and digital return paths should be arranged carefully to reduce coupling into ADC measurements. Firmware should also validate the selected clock configuration and peripheral limits at the highest intended operating temperature.

This product page combines the exact ordering information, package and temperature details, manufacturer documentation, drop-in alternatives, and practical design guidance needed to evaluate the PIC18F4525-E/P for an extended-temperature embedded-control design.

کے لیے ڈراپ اِن متبادل PIC18F4525-E/P — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC18F4525-E/P (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Mounting Type, ADC, Operating Temperature, Package, Timers.

Microchip Technology
Mounting Type: Surface Mount
ADC: 10-bit, up to 13 channels
Operating Temperature: -40 C to +85 C (Industrial, -I)
Microchip Technology
ADC: 10-bit, 13 channels
Operating Temperature: -40 C to +85 C (Industrial)
Package: 40-pin PDIP (P)

PIC18F4525-I/PT

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Microchip Technology
📦 40-pin PDIP
PIC18 8-bit RISC · 48 KB · 3,968 bytes · 256 bytes · 40 MHz (10 MIPS) · 4.2 V to 5.5 V · 36 · 10-bit, up to 13 channels

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PIC18F4620-I/P

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
Microchip Technology
📦 40-pin PDIP
PIC 18F · PIC · 8-bit · Flash · 64 KB (32K x 16) · 3968 bytes · 1024 bytes · 40 MHz (10 MIPS)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

PIC18F4525-E/P زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Microcontroller Type 8-bit PIC18 enhanced-flash microcontroller
زیادہ سے زیادہ کلاک فریکوئنسی 40 MHz
Program Memory 48 KB enhanced Flash (24K x 16)
Data Memory 3968 bytes RAM
General-Purpose I/O 36 I/O
Analog-to-Digital Converter 10-bit ADC
آپریٹنگ درجہ حرارت رینج -40°C to +125°C
Package Type 40-pin PDIP, 0.600 in (15.24 mm) pitch
Lead Count 40 pins
ماؤنٹنگ ٹائپ Through-hole
Packing Media Tube
Standard Tube Quantity 10 units
Low-Power Technology nanoWatt technology
Country of Origin Thailand
لائف سائیکل کی حالت In production

PIC18F4525-E/P 40-pin pdip, 0.600 in (15.24 mm) pitch پن کنفیگریشن گائیڈ

PIC18F4525-E/P (40-pin pdip, 0.600 in (15.24 mm) pitch پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

PIC18F4525-E/P کے لیے 40-pin pdip, 0.600 in (15.24 mm) pitch پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC18F4525-E/P.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

PIC18F4525-E/P کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Panels, Temperature and Process Transmitters, Data Acquisition Systems, Power and Energy Monitoring, Motor and Relay Control, Laboratory and Test Equipment.

🏭

Industrial Control Panels

The PIC18F4525-E/P fits industrial control panels that need a mix of digital I/O, program memory, analog monitoring, and extended-temperature operation. Its 36 I/O lines can handle pushbuttons, status LEDs, relay-control outputs, and discrete sensor inputs, while the integrated 10-bit ADC can monitor pressure, temperature, or potentiometer signals. The 48 KB enhanced Flash and 3968 bytes of RAM provide practical capacity for sequencing logic, diagnostics, and communication routines. With a 40 MHz clock, the MCU can combine control tasks with periodic sampling and human-interface handling. The -40°C to +125°C rating makes it suitable for cabinets, machinery, and production equipment where temperature changes exceed ordinary commercial conditions.

🌡️

Temperature and Process Transmitters

PIC18F4525-E/P is appropriate for temperature and process transmitters that convert sensor signals into standardized control outputs. The 10-bit ADC supports direct acquisition of resistive sensors and buffered analog inputs, while 36 digital I/O lines can manage switches, alarm outputs, status indicators, and external interfaces. Firmware can perform linearization, filtering, calibration, and sensor-break diagnostics within the available 48 KB enhanced Flash memory. Its 3968-byte RAM supports acquisition buffers and protocol processing without forcing an external memory device. Extended operation from -40°C to +125°C is particularly valuable in industrial cabinets, heated enclosures, outdoor installations, and process environments where internal temperatures may rise substantially.

📊

Data Acquisition Systems

The PIC18F4525-E/P can serve as the acquisition controller for compact industrial data loggers and test equipment. Its 10-bit ADC provides 1024 quantization levels, suitable for many process-voltage and position measurements when paired with appropriate signal conditioning. The 36 I/O pins can control sample-and-hold or multiplexer hardware, latch status signals, and operate external memory or communications modules. A 40 MHz clock gives sufficient processing bandwidth for calibration tables, digital filtering, timestamp handling, and packet preparation. The device’s 3968-byte RAM and 48 KB enhanced Flash also support moderate local buffering and firmware updates. Extended-temperature operation improves suitability for test systems installed near motors, power stages, or heated production equipment.

⚡

Power and Energy Monitoring

PIC18F4525-E/P can supervise power-conversion or energy-monitoring subsystems where an MCU must combine analog measurement with discrete control outputs. Its 10-bit ADC can sample scaled voltage or current signals, while 36 I/O pins can support switch control, fault flags, relay drivers, and status displays. The enhanced-Flash memory provides room for calibration coefficients, logging functions, and firmware revision management, and the 3968-byte RAM can hold working state during update and measurement operations. The -40°C to +125°C range supports equipment near converters, batteries, industrial chargers, and power cabinets. Designers should use suitable input dividers, isolation, filtering, and protection because the MCU pins are not substitutes for dedicated power-semiconductor drivers.

⚙️

Motor and Relay Control

PIC18F4525-E/P is useful in relay, solenoid, and small motor-control systems that require deterministic embedded logic and several peripheral inputs. The 36 I/O pins allow connection of limit switches, encoders or sensors, control outputs, and diagnostic signals, while the 10-bit ADC can monitor motor current proxies, potentiometers, or temperature sensors. Its 40 MHz maximum clock permits fast input polling, timing tasks, and protection logic, and the 48 KB enhanced Flash supports organized control and diagnostic code. Extended-temperature operation from -40°C to +125°C suits machinery and enclosures with elevated internal temperatures. Output transistors, flyback protection, grounding, and isolation must be designed around the inductive loads rather than driving them directly from MCU pins.

🧪

Laboratory and Test Equipment

PIC18F4525-E/P can control compact laboratory instruments, automated fixtures, and measurement systems where a 40-pin microcontroller combines processing and peripheral integration. Its 10-bit ADC supports basic analog readings, while 36 I/O lines can operate relays, indicator lamps, stepper-control signals, front-panel switches, and external test fixtures. The 48 KB enhanced Flash stores measurement algorithms, calibration data, and command handlers, and 3968 bytes of RAM supports working buffers. The 40-pin PDIP format is especially convenient for laboratory prototypes because through-hole assembly and manual probing are straightforward. For precision analytical measurements, however, an external higher-resolution converter and carefully isolated analog front end may be required instead of the integrated 10-bit ADC.

What is the operating voltage of PIC18F4525-E/P?
The PIC18F4525-E/P operates from its specified VDD-to-VSS supply range, with exact minimum and maximum limits defined in the Microchip manufacturer datasheet PIC18F2525/2620/4525/4620. The device combines an 8-bit CPU, 40 MHz maximum operating frequency, and 48 KB enhanced Flash memory. Confirm the voltage limits and decoupling requirements against the appropriate operating-temperature and power-source conditions before finalizing the schematic.
What are the key specifications of PIC18F4525-E/P that engineers should know?
The PIC18F4525-E/P is an 8-bit microcontroller with a 40 MHz maximum clock, 48 KB of enhanced Flash program memory, 3968 bytes of RAM, 36 I/O pins, and a 10-bit ADC. According to the Microchip manufacturer datasheet PIC18F2525/2620/4525/4620, the device uses the PIC18 architecture and nanoWatt technology. It is packaged in a 40-pin PDIP and rated for operation from -40°C to +125°C.
Where to download PIC18F4525-E/P datasheet PDF?
The PIC18F4525-E/P datasheet can be downloaded from the official Microchip PDF link published for the PIC18F2525/2620/4525/4620 family. The document contains the electrical characteristics, pin descriptions, memory organization, peripheral operation, and device-specific ordering information. Use the manufacturer document when establishing the PCB pin assignments, programming configuration, timing limits, and application reference circuits.
Where can I find the PIC18F4525 pinout?
The PIC18F4525 pinout is shown in the pin-description section of the official Microchip PIC18F2525/2620/4525/4620 family datasheet. The exact target is the 40-pin PDIP configuration, designated PIC18F4525-E/P, with a 0.600-inch lead pitch. Use the package drawing and pin table together because the same family is also offered in 28-pin and 44-pin packages whose numbering does not apply to this 40-pin device.
Is PIC18F4525-E/P suitable for industrial temperature applications?
The PIC18F4525-E/P is suitable for extended-temperature industrial applications because its specified operating range is -40°C to +125°C. It combines 48 KB of enhanced Flash, 3968 bytes of RAM, 36 I/O pins, and a 10-bit ADC in a 40-pin PDIP package. For production equipment, also verify the regulator, power supply, display, and external components for their own temperature ratings.
What can replace PIC18F4525-E/P?
PIC18F4525-I/P is the closest same-package alternative because it retains the 40-pin PDIP footprint, 48 KB Flash, 3968-byte RAM, 36 I/O pins, 8-bit architecture, 10-bit ADC, and 40 MHz maximum clock. The principal difference is the temperature grade: the -E/P target supports -40°C to +125°C, while the -I/P alternative uses the industrial-grade suffix. Confirm the alternative’s temperature limits and qualification requirements before substitution.
Is PIC18F4525-E/P the same as PIC18F4525-I/P?
PIC18F4525-E/P and PIC18F4525-I/P are not identical across every operating condition because the ordering suffixes denote different temperature grades. Both provide the same 40-pin PDIP package, 8-bit CPU, 40 MHz maximum frequency, 48 KB enhanced Flash, 3968 bytes of RAM, 36 I/O pins, and 10-bit ADC. The -E/P target is specified for -40°C to +125°C operation.
PIC18F4525-E/P vs PIC18F4620-I/P - which is better for industrial control?
PIC18F4525-E/P is preferable when the design specifically requires 48 KB of program memory, 3968 bytes of RAM, 36 I/O pins, and operation to +125°C. PIC18F4620-I/P offers a larger Flash-memory-oriented family variant and may suit designs needing additional program capacity or related family resources. The final choice should also account for temperature grade, exact pin compatibility, firmware support, and peripheral availability in the selected ordering code.
When should I choose PIC18F4525-E/P over PIC18F4525-I/P?
Choose PIC18F4525-E/P when the enclosure can reach temperatures above the industrial -I/P operating limit and the system requires the documented -40°C to +125°C range. Both devices otherwise share the 40-pin PDIP footprint, 8-bit CPU, 40 MHz maximum clock, 48 KB enhanced Flash, 3968-byte RAM, 36 I/O pins, and 10-bit ADC. Select the alternative when its specified temperature range covers the product’s worst-case ambient conditions.
Is PIC18F4525-E/P suitable for a 10-bit sensor interface?
Yes, PIC18F4525-E/P is suitable for many 10-bit sensor-measurement systems because it integrates a 10-bit ADC with 36 general-purpose I/O pins and a 40 MHz 8-bit CPU. Its 48 KB enhanced Flash and 3968 bytes of RAM provide space for acquisition logic and control firmware. A 10-bit result corresponds to 1024 quantization levels, so analog front-end accuracy, reference stability, sampling strategy, and calibration determine final measurement quality.
Where to buy PIC18F4525-E/P online?
Use the Request a Quote form on this page to request PIC18F4525-E/P availability, pricing, and lead time for the exact 40-pin PDIP ordering code. The manufacturer product page identifies the device as a 40-pin, 48 KB enhanced-Flash microcontroller with 3968 bytes of RAM, 36 I/O pins, a tube packing quantity of 10, and a -40°C to +125°C temperature range. Confirm the requested suffix and packing format before placing an order.
What is the price of PIC18F4525-E/P?
The current commercial price for PIC18F4525-E/P is shown through the Request a Quote form on this page. The pricing form applies to the exact MPN, 40-pin PDIP package, tube packing format, and order quantity. For a production quotation, provide the annual demand and target delivery schedule so the commercial team can confirm current availability and the appropriate volume structure.
What is the lead time for PIC18F4525-E/P?
The current lead time for PIC18F4525-E/P should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the part as in production and specifies a tube packing quantity of 10, but schedule depends on order quantity and inventory at the time of quotation. Provide your required quantity, target date, and acceptable tube packaging when requesting the schedule.
Is PIC18F4525-E/P in stock?
Use the Request a Quote form on this page to check current PIC18F4525-E/P stock and lead time. The manufacturer lists the device as in production, while individual distributor listings can change independently as inventory is allocated. A quotation response should confirm the exact -E/P temperature grade, 40-pin PDIP package, and tube packing quantity requested.
What programming tools are compatible with PIC18F4525-E/P?
PIC18F4525-E/P is supported by Microchip’s PIC programming and development environment, including the MPLAB PICkit 5 in-circuit debugger/programmer identified on the official product page. According to Microchip, the PICkit 5 supports Microchip devices including PIC microcontrollers. Select the correct device adapter and programming connector for the 40-pin PDIP package, and verify programming voltage, interface, and target settings before production use.
Does PIC18F4525-E/P comply with RoHS and REACH?
The exact RoHS and REACH declarations for PIC18F4525-E/P should be confirmed through the Material Compliance information linked from the manufacturer product page. The product page provides the ordering code and commercial material-compliance tools for this assessment. Do not infer a declaration from the PIC18 family alone, because compliance documentation can vary by package, ordering code, revision, or manufacturing location.

کے لیے انجینئرنگ ریفرنس ڈیٹا PIC18F4525-E/P — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose PIC18F4525-E/P when the product requires a 40-pin PDIP microcontroller with a 40 MHz maximum clock, 48 KB enhanced Flash, 3968 bytes of RAM, 36 I/O pins, a 10-bit ADC, and operation from -40°C to +125°C. PIC18F4525-I/P is the closest pin-compatible choice for normal industrial temperatures up to +85°C because it retains the same core resources and package. PIC18F4620-I/P belongs to the related 4620 family and may be appropriate when its additional family resources are required, but verify its exact memory, peripheral, and temperature details before substituting it. For all alternatives, confirm the exact package drawing, pin multiplexing, oscillator setup, programming configuration, and peripheral availability. The -E/P target is the clearest choice when the upper temperature requirement exceeds +85°C or when maintaining the specified extended-temperature grade is important.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ PIC18F4525-I/P PIC18F4620-I/P
Manufacturer Microchip Technology Microchip Technology Microchip Technology
Package 40-pin PDIP 40-pin PDIP 40-pin PDIP
Architecture 8-bit PIC18 8-bit PIC18 8-bit PIC18
ADC Resolution 10-bit ADC 10-bit ADC 10-bit ADC
Operating Temperature Range -40°C to +125°C -40°C to +85°C -40°C to +85°C
Temperature Grade Extended grade Industrial grade Industrial grade

اہم امتیازی خصوصیات

  • Wider operating-temperature range (بمقابلہPIC18F4525-I/P)
  • Retains the same core interface and memory configuration (بمقابلہPIC18F4525-I/P)
  • Accessible through-hole package for legacy-style assemblies (بمقابلہPIC18F4620-I/P)

ڈیزائن نوٹس

The PIC18F4525-E/P uses a 40-pin PDIP footprint with a 0.600-inch lead pitch. Preserve the package outline, hole diameter, pin-1 orientation, and solder-mask clearance rather than treating it as a generic 40-pin DIP footprint. Check the official package drawing before placing decoupling capacitors because the wide row spacing affects routing access and component placement. Through-hole assembly also requires sufficient clearance for lead protrusion and automated insertion tooling.

Place the required supply and decoupling capacitors close to the VDD and VSS pins, following the connection and capacitor-selection guidance in the manufacturer datasheet. Separate analog-input routing from switching nodes and high-current relay or motor paths to reduce ADC noise. Since the PIC18F4525-E/P includes a 10-bit converter, a stable reference and correctly scaled analog front end are as important as processor clock stability for repeatable measurements.

Do not substitute an industrial-temperature ordering code when the product must operate above +85°C, and do not treat the -E and -I suffixes as interchangeable manufacturing options. Also verify that a proposed alternative has the same 40-pin electrical assignments rather than relying only on the number of leads. Review oscillator configuration, brownout behavior, programming mode, and peripheral pin multiplexing in the family datasheet before releasing production firmware.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product page provides a Material Compliance tool. Exact declarations for this ordering code were not extracted and remain unconfirmed.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

pic18f4525 datasheet pic18f4525 pinout PIC18F4525-E/P datasheet PIC18F4525-E/P pinout PIC18F4525-E/P equivalent PIC18F4525-E/P replacement PIC18F4525-E/P vs PIC18F4525-I/P PIC18F4525 40MHz 8-bit microcontroller PIC18F4525 48KB enhanced flash PIC18F4525 40-pin PDIP PIC18F4525 industrial control application PIC18F4525-E/P price PIC18F4525-E/P stock Microchip PIC18F4525-E/P

متعلقہ اجزاء اور اصطلاحات

Microchip Technology PIC18F4525-E/P PIC18F4525 PIC18F4525-I/P PIC18F4620-I/P PIC18 microcontrollers 8-bit microcontroller RISC microcontroller embedded control Enhanced Flash nanoWatt technology 40-pin PDIP PDIP package through-hole package 10-bit ADC 40 MHz 48 KB Flash 3968-byte RAM 36 I/O industrial control data acquisition process transmitter motor control MPLAB PICkit 5
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں