PIC18F4525-E/P - 40MHz 8-Bit 48KB Flash MCU | Microchip
부품 번호: PIC18F4525-E/P ✓ 활성PIC18F4525-E/P 개요
A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and I/O in one integrated device. The PIC18F4525 belongs to the PICmicro family of 8-bit RISC microcontrollers, which sit within the broader semiconductor and embedded-control hierarchy. Its combination of enhanced Flash memory, nanoWatt technology, and legacy-compatible through-hole packaging makes it suitable for established industrial, instrumentation, control, and appliance platforms that value deterministic peripheral integration and long-established firmware support.
Key device capabilities include 48 KB of enhanced Flash program memory, 3968 bytes of RAM, 36 general-purpose I/O lines, a 10-bit ADC, and operation to 40 MHz. The -E temperature designation supports operation from -40°C to +125°C, providing a wider temperature range than a conventional commercial-grade selection. Its 40-pin PDIP format also facilitates inspection, rework, prototyping, and through-hole board assembly compared with a fine-pitch surface-mount package.
The device integrates the CPU, Flash program storage, data RAM, timer resources, serial interfaces, interrupt control, and analog conversion functions into one package. Program execution can be driven from multiple internal oscillator options and external clock arrangements, allowing designers to balance timing, power consumption, and system stability. The PIC18 instruction architecture and peripheral model support established PIC development toolchains, while the 10-bit ADC provides sufficient resolution for many industrial measurement and monitoring functions.
Typical applications include industrial control panels, temperature transmitters, data acquisition systems, power-monitoring equipment, motor and relay controllers, laboratory instruments, and embedded products that must operate across extended temperatures. Its 36 I/O pins can support digital inputs, output switching, status indicators, external memory interfaces, communications, and analog sensing. The 10-bit ADC is particularly useful when the application does not require the resolution of a dedicated high-precision converter.
Designers should confirm oscillator, reset, programming, and decoupling arrangements against the manufacturer datasheet before layout. The 40-pin PDIP footprint requires adequate lead spacing and through-hole clearance, while analog and digital return paths should be arranged carefully to reduce coupling into ADC measurements. Firmware should also validate the selected clock configuration and peripheral limits at the highest intended operating temperature.
This product page combines the exact ordering information, package and temperature details, manufacturer documentation, drop-in alternatives, and practical design guidance needed to evaluate the PIC18F4525-E/P for an extended-temperature embedded-control design.
드롭인 대체품: PIC18F4525-E/P — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC18F4525-E/P (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, ADC, Operating Temperature, Package, Timers.
PIC18F4525-I/PT
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →PIC18F4620-I/P
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →PIC18F4525-E/P 최대 정격 & 전기적 특성
| Microcontroller Type | 8-bit PIC18 enhanced-flash microcontroller |
| 최대 클록 주파수 | 40 MHz |
| Program Memory | 48 KB enhanced Flash (24K x 16) |
| Data Memory | 3968 bytes RAM |
| General-Purpose I/O | 36 I/O |
| Analog-to-Digital Converter | 10-bit ADC |
| 동작 온도 범위 | -40°C to +125°C |
| Package Type | 40-pin PDIP, 0.600 in (15.24 mm) pitch |
| Lead Count | 40 pins |
| 실장 유형 | Through-hole |
| Packing Media | Tube |
| Standard Tube Quantity | 10 units |
| Low-Power Technology | nanoWatt technology |
| Country of Origin | Thailand |
| 수명 주기 상태 | In production |
PIC18F4525-E/P 40-pin pdip, 0.600 in (15.24 mm) pitch 핀 구성 가이드
PIC18F4525-E/P(40-pin pdip, 0.600 in (15.24 mm) pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PIC18F4525-E/P.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PIC18F4525-E/P 적합 용도: 6 애플리케이션s: Industrial Control Panels, Temperature and Process Transmitters, Data Acquisition Systems, Power and Energy Monitoring, Motor and Relay Control, Laboratory and Test Equipment.
Industrial Control Panels
The PIC18F4525-E/P fits industrial control panels that need a mix of digital I/O, program memory, analog monitoring, and extended-temperature operation. Its 36 I/O lines can handle pushbuttons, status LEDs, relay-control outputs, and discrete sensor inputs, while the integrated 10-bit ADC can monitor pressure, temperature, or potentiometer signals. The 48 KB enhanced Flash and 3968 bytes of RAM provide practical capacity for sequencing logic, diagnostics, and communication routines. With a 40 MHz clock, the MCU can combine control tasks with periodic sampling and human-interface handling. The -40°C to +125°C rating makes it suitable for cabinets, machinery, and production equipment where temperature changes exceed ordinary commercial conditions.
Temperature and Process Transmitters
PIC18F4525-E/P is appropriate for temperature and process transmitters that convert sensor signals into standardized control outputs. The 10-bit ADC supports direct acquisition of resistive sensors and buffered analog inputs, while 36 digital I/O lines can manage switches, alarm outputs, status indicators, and external interfaces. Firmware can perform linearization, filtering, calibration, and sensor-break diagnostics within the available 48 KB enhanced Flash memory. Its 3968-byte RAM supports acquisition buffers and protocol processing without forcing an external memory device. Extended operation from -40°C to +125°C is particularly valuable in industrial cabinets, heated enclosures, outdoor installations, and process environments where internal temperatures may rise substantially.
Data Acquisition Systems
The PIC18F4525-E/P can serve as the acquisition controller for compact industrial data loggers and test equipment. Its 10-bit ADC provides 1024 quantization levels, suitable for many process-voltage and position measurements when paired with appropriate signal conditioning. The 36 I/O pins can control sample-and-hold or multiplexer hardware, latch status signals, and operate external memory or communications modules. A 40 MHz clock gives sufficient processing bandwidth for calibration tables, digital filtering, timestamp handling, and packet preparation. The device’s 3968-byte RAM and 48 KB enhanced Flash also support moderate local buffering and firmware updates. Extended-temperature operation improves suitability for test systems installed near motors, power stages, or heated production equipment.
Power and Energy Monitoring
PIC18F4525-E/P can supervise power-conversion or energy-monitoring subsystems where an MCU must combine analog measurement with discrete control outputs. Its 10-bit ADC can sample scaled voltage or current signals, while 36 I/O pins can support switch control, fault flags, relay drivers, and status displays. The enhanced-Flash memory provides room for calibration coefficients, logging functions, and firmware revision management, and the 3968-byte RAM can hold working state during update and measurement operations. The -40°C to +125°C range supports equipment near converters, batteries, industrial chargers, and power cabinets. Designers should use suitable input dividers, isolation, filtering, and protection because the MCU pins are not substitutes for dedicated power-semiconductor drivers.
Motor and Relay Control
PIC18F4525-E/P is useful in relay, solenoid, and small motor-control systems that require deterministic embedded logic and several peripheral inputs. The 36 I/O pins allow connection of limit switches, encoders or sensors, control outputs, and diagnostic signals, while the 10-bit ADC can monitor motor current proxies, potentiometers, or temperature sensors. Its 40 MHz maximum clock permits fast input polling, timing tasks, and protection logic, and the 48 KB enhanced Flash supports organized control and diagnostic code. Extended-temperature operation from -40°C to +125°C suits machinery and enclosures with elevated internal temperatures. Output transistors, flyback protection, grounding, and isolation must be designed around the inductive loads rather than driving them directly from MCU pins.
Laboratory and Test Equipment
PIC18F4525-E/P can control compact laboratory instruments, automated fixtures, and measurement systems where a 40-pin microcontroller combines processing and peripheral integration. Its 10-bit ADC supports basic analog readings, while 36 I/O lines can operate relays, indicator lamps, stepper-control signals, front-panel switches, and external test fixtures. The 48 KB enhanced Flash stores measurement algorithms, calibration data, and command handlers, and 3968 bytes of RAM supports working buffers. The 40-pin PDIP format is especially convenient for laboratory prototypes because through-hole assembly and manual probing are straightforward. For precision analytical measurements, however, an external higher-resolution converter and carefully isolated analog front end may be required instead of the integrated 10-bit ADC.
엔지니어링 참조 데이터: PIC18F4525-E/P — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC18F4525-I/P | PIC18F4620-I/P |
|---|---|---|---|
| Manufacturer | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-pin PDIP | 40-pin PDIP | 40-pin PDIP |
| Architecture | 8-bit PIC18 | 8-bit PIC18 | 8-bit PIC18 |
| ADC Resolution | 10-bit ADC | 10-bit ADC | 10-bit ADC |
| Operating Temperature Range | -40°C to +125°C | -40°C to +85°C | -40°C to +85°C |
| Temperature Grade | Extended grade | Industrial grade | Industrial grade |
주요 차별점
- Wider operating-temperature range (vs PIC18F4525-I/P)
- Retains the same core interface and memory configuration (vs PIC18F4525-I/P)
- Accessible through-hole package for legacy-style assemblies (vs PIC18F4620-I/P)
설계 노트
The PIC18F4525-E/P uses a 40-pin PDIP footprint with a 0.600-inch lead pitch. Preserve the package outline, hole diameter, pin-1 orientation, and solder-mask clearance rather than treating it as a generic 40-pin DIP footprint. Check the official package drawing before placing decoupling capacitors because the wide row spacing affects routing access and component placement. Through-hole assembly also requires sufficient clearance for lead protrusion and automated insertion tooling.
Place the required supply and decoupling capacitors close to the VDD and VSS pins, following the connection and capacitor-selection guidance in the manufacturer datasheet. Separate analog-input routing from switching nodes and high-current relay or motor paths to reduce ADC noise. Since the PIC18F4525-E/P includes a 10-bit converter, a stable reference and correctly scaled analog front end are as important as processor clock stability for repeatable measurements.
Do not substitute an industrial-temperature ordering code when the product must operate above +85°C, and do not treat the -E and -I suffixes as interchangeable manufacturing options. Also verify that a proposed alternative has the same 40-pin electrical assignments rather than relying only on the number of leads. Review oscillator configuration, brownout behavior, programming mode, and peripheral pin multiplexing in the family datasheet before releasing production firmware.
규정 준수 정보
The manufacturer product page provides a Material Compliance tool. Exact declarations for this ordering code were not extracted and remain unconfirmed.