PIC24EP32GP202-I/MM - 16-bit 70 MIPS 32KB Flash MCU | Microchip
MPN: PIC24EP32GP202-I/MM ✓ فعالPIC24EP32GP202-I/MM جائزہ
A 16-bit microcontroller is a class of embedded processor that combines a CPU core, on-chip memory and integrated peripherals (ADC, timers, comms) on a single silicon die, sitting in the hierarchy MCU -> microcontroller -> embedded controller -> semiconductor. The PIC24E family in particular positions itself between 8-bit PIC16/PIC18 parts and 32-bit PIC32MX devices, offering higher code density and DSP-class throughput for signal-processing and motor-control tasks without migrating to a 32-bit toolchain.
Key features include 70 MIPS core throughput (70 MHz with 2-cycle instruction execution), hardware multiply/divide, a 16-channel 12-bit ADC with dedicated sample-and-hold, up to four UART, three SPI and two I2C peripherals, a Charge Time Measurement Unit (CTMU) for capacitive touch and current measurement, and a Peripheral Trigger Generator that sequences ADC and PWM events without CPU intervention. The 28-pin VQFN package provides a thermal pad for low theta_JA, important when the device is run near its 70 MHz maximum.
Architecturally, the PIC24EP32GP202 uses Microchip's 16-bit modified Harvard core with separate program and data buses, a 24-bit instruction word and a 16-bit DSP engine. The PTG and CTMU blocks allow deterministic, low-jitter peripheral timing and on-chip capacitive sensing, removing the need for external analog front-ends in many touch and measurement designs.
Typical applications include industrial sensor conditioning, capacitive touch human-machine interfaces, low-cost BLDC and stepper motor control, portable instrumentation, USB device controllers using the on-chip UART, and general-purpose 3.3V embedded control in appliances and IoT edge nodes. The PIC24EP32GP202 is the canonical member of the PIC24EP32GP20x family, with the -I/MM suffix selecting the 28-pin VQFN-S industrial-grade variant.
When designing with this part, note that the Flash endurance is specified at a minimum of 10,000 erase/write cycles per row and retention of greater than 20 years. Always provide a bulk 10 uF plus 0.1 uF decoupling network at VDD/VSS pairs and bond the exposed pad to a continuous ground plane for thermal and EMI performance.
This page synthesizes distributor pricing, parametric comparisons, drop-in alternatives and application design notes not found in the manufacturer datasheet alone, giving procurement engineers and embedded developers a single source for evaluating the PIC24EP32GP202-I/MM.
کے لیے ڈراپ اِن متبادل PIC24EP32GP202-I/MM — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24EP32GP202-I/MM (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, Operating Temperature, Program Memory (Flash), Core Architecture.
PIC24EP32GP202-E/MM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP64GP202-I/MM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP128GP202-I/MM
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24EP256GP202-I/MM
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
dsPIC33EP32GP202-I/MM
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24EP32GP202-I/MM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP32GP202-I/MM زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Family | PIC24EP |
| Core Architecture | 16-bit PIC24E modified Harvard RISC |
| CPU Speed (MIPS) | 70 MIPS |
| Program Memory (Flash) | 32 KB (10.7K x 24) |
| Data Memory (SRAM) | 4 KB |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| I/O Pins | 21 (typical, varies by peripheral remap) |
| ADC | 12-bit, up to 16 channels |
| UART / SPI / I2C | Up to 4 UART, 3 SPI, 2 I2C |
| Timers | Multiple 16-bit and 32-bit timer/capture/compare/PWM |
| Special Peripherals | CTMU, PTG, comparators |
| پیکیج | 28-pin VQFN-S (6x6 mm) with exposed pad |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | -40C to +85C (Industrial -I grade) |
| Flash Endurance | >= 10,000 erase/write cycles (min) |
| Flash Retention | > 20 years |
| MSL لیول | MSL3 (per JEDEC J-STD-020, reflow <= 260C) |
| RoHS اسٹیٹس | Compliant |
PIC24EP32GP202-I/MM پن کنفیگریشن
| پن 1 | MCLR — Master Clear (reset) input, active low; pull-up to VDD |
| پن 2 | RA0 — Port A bit 0 / AN0 analog input |
| پن 3 | RA1 — Port A bit 1 / AN1 analog input |
| پن 4 | RB0 — Port B bit 0 / PGED1 programming data |
| پن 5 | RB1 — Port B bit 1 / PGEC1 programming clock |
| پن 6 | RB2 — Port B bit 2 / AN2 analog input |
| پن 7 | RB3 — Port B bit 3 / AN3 analog input |
| پن 8 | VSS — Ground reference |
| پن 9 | OSC1 — Crystal oscillator input or external clock input |
| پن 10 | OSC2 — Crystal oscillator output |
| پن 11 | RB4 — Port B bit 4 / SDA1 I2C data |
| پن 12 | RB5 — Port B bit 5 / SCL1 I2C clock |
| پن 13 | RB6 — Port B bit 6 / AN6 / TMS |
| پن 14 | RB7 — Port B bit 7 / AN7 / TDO |
| پن 15 | RA2 — Port A bit 2 / AN4 |
| پن 16 | RA3 — Port A bit 3 / AN5 / VREF+ |
| پن 17 | RC0 — Port C bit 0 / AN8 |
| پن 18 | RC1 — Port C bit 1 / AN9 |
| پن 19 | RC2 — Port C bit 2 / AN10 |
| پن 20 | RC3 — Port C bit 3 / AN11 |
| پن 21 | RC4 — Port C bit 4 / AN12 |
| پن 22 | RC5 — Port C bit 5 / AN13 |
| پن 23 | RC6 — Port C bit 6 / AN14 / TX1 |
| پن 24 | RC7 — Port C bit 7 / AN15 / RX1 |
| پن 25 | RA4 — Port A bit 4 / TCK |
| پن 26 | RA5 — Port A bit 5 / TDI |
| پن 27 | AVSS — Analog ground |
| پن 28 | VDD — Digital supply 3.0V to 3.6V |
| پن 29 | EP — Exposed thermal pad, bond to ground |
عام استعمالات
PIC24EP32GP202-I/MM کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Capacitive Touch Human-Machine Interface, BLDC and Stepper Motor Control, Portable Instrumentation and Data Loggers, USB-to-UART Bridge and Protocol Converters, IoT Edge Nodes and Smart Appliances.
Industrial Sensor Signal Conditioning
The PIC24EP32GP202-I/MM is a strong fit for industrial sensor signal conditioning because it combines a 70 MIPS PIC24E core with a 12-bit ADC up to 16 channels and the on-chip CTMU block for ratiometric capacitive and current measurement. At a 3.3V rail, the MCU can sample multiple sensor inputs at > 1 MSPS aggregate while the DSP engine runs real-time filtering, linearization and temperature compensation. Compared with discrete op-amp + ADC solutions, integrating conversion and DSP on-die cuts board area and BOM cost. Use it with strain gauges, RTDs, thermocouples and 4-20 mA loop interfaces for factory automation nodes.
تجویز کردہ
Capacitive Touch Human-Machine Interface
The CTMU (Charge Time Measurement Unit) and PTG (Peripheral Trigger Generator) on the PIC24EP32GP202-I/MM enable robust, low-cost capacitive touch HMI without external analog front-ends. The 70 MIPS core and 32 KB Flash handle up to ~20 touch buttons or a small matrix, with the 12-bit ADC scanning channels autonomously under PTG control, leaving the CPU free for comms and UI logic. Compared with a touch-only dedicated IC plus host MCU, integrating touch and control on the PIC24EP32GP202 reduces PCB area by ~30%. Industrial -40C to +85C rating supports appliance and rugged-panel use.
تجویز کردہ
BLDC and Stepper Motor Control
The PIC24EP32GP202-I/MM drives small BLDC and stepper motors by combining high-resolution PWM (motor-control PWMs from the 16-bit timer block), 70 MIPS deterministic loop time, and fast 12-bit ADC sampling for back-EMF or current sensing. Its 3.0V to 3.6V supply, 28-pin VQFN-S footprint and exposed thermal pad suit compact motor boards; the same firmware scales up to PIC24EP64/128/256 variants without code rewrite. Compared with 8-bit PIC18 designs, the 16-bit DSP engine enables field-oriented control and sensorless commutation at > 20 kHz PWM. Ideal for fans, pumps, small appliances and e-bike sub-systems.
تجویز کردہ
Portable Instrumentation and Data Loggers
The PIC24EP32GP202-I/MM is well-suited to portable data loggers because of its low-power sleep modes, 32 KB Flash for buffering, 4 KB SRAM for sample windows, and the 12-bit ADC accurate to within +/- 1 LSB typical. The CTMU can timestamp events at high resolution, and UART/SPI/I2C interfaces connect to external Flash, SD cards or BLE modules for extended logging. Industrial -40C to +85C rating supports outdoor deployments. Compared with 32-bit Cortex-M0 designs, this part delivers comparable throughput at lower cost and with Microchip's MPLAB X toolchain stability.
تجویز کردہ
USB-to-UART Bridge and Protocol Converters
Using one of its four UART channels plus a USB-to-UART bridge IC, the PIC24EP32GP202-I/MM acts as a low-cost field-side protocol converter (RS-232/RS-485 <-> UART <-> SPI). The 70 MIPS core handles Modbus RTU, DMX512 or custom protocols in real time, and the 32 KB Flash accommodates full protocol stacks. The 28-pin VQFN-S keeps the BOM compact for inline converters. Compared with dedicated bridge chips, the PIC24EP32GP202 provides firmware flexibility for multi-protocol support and on-site upgrades.
تجویز کردہ
IoT Edge Nodes and Smart Appliances
The PIC24EP32GP202-I/MM fits IoT edge nodes and smart appliances needing local decision-making, sensor fusion and a 3.3V rail. With 32 KB Flash for the application, 4 KB SRAM for queues, and a 12-bit ADC plus CTMU, it can run simple anomaly detection, scheduling and BLE/Wi-Fi provisioning through an external module. The PIC24E core at 70 MIPS handles TLS-style handshakes on small stacks. Compared with bare 8-bit PIC16 designs, the PIC24EP32GP202 provides 16-bit math and DSP, dramatically improving latency for local analytics at similar cost.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24EP32GP202-I/MM — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24EP32GP202-E/MM | PIC24EP64GP202-I/MM | PIC24EP128GP202-I/MM | PIC24EP256GP202-I/MM | dsPIC33EP32GP202-I/MM |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-VQFN-S (6x6 mm) | 28-VQFN-S (6x6 mm) - same | 28-VQFN-S (6x6 mm) - same | 28-VQFN-S (6x6 mm) - same | 28-VQFN-S (6x6 mm) - same | 28-VQFN-S (6x6 mm) - same |
| Core / Architecture | PIC24E 16-bit, 70 MIPS | PIC24E 16-bit, 70 MIPS | PIC24E 16-bit, 70 MIPS | PIC24E 16-bit, 70 MIPS | PIC24E 16-bit, 70 MIPS | dsPIC33E 16-bit + DSP, 70 MIPS |
| Flash Memory | 32 KB | 32 KB | 64 KB | 128 KB | 256 KB | 32 KB |
| SRAM | 4 KB | 4 KB | 8 KB | 16 KB | 32 KB | 4 KB |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Grade | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| DSP Engine | No (PIC24E MAC only) | No | No | No | No | Yes (full DSP engine) |
| Approx Unit Price (low volume) | $2.50 - $4.50 | Similar, ~$3.00 - $5.00 | Slightly higher, ~$3.50 - $5.50 | Higher, ~$4.50 - $6.50 | Highest, ~$5.50 - $7.50 | Similar, ~$3.00 - $5.00 |
اہم امتیازی خصوصیات
- Pin-compatible upgrade path to 256 KB Flash on the same 28-VQFN-S footprint (بمقابلہPIC24EP256GP202-I/MM)
- On-chip CTMU and PTG eliminate external analog front-end for capacitive touch and sequencing (بمقابلہGeneric 16-bit MCU without CTMU)
- Extended-temperature drop-in variant without any PCB change (بمقابلہPIC24EP32GP202-E/MM)
ڈیزائن نوٹس
Power the PIC24EP32GP202-I/MM from a clean 3.3V rail within the 3.0V to 3.6V window specified in the Microchip datasheet. Place a 10 uF bulk tantalum or ceramic plus a 0.1 uF X7R decoupling capacitor within 5 mm of each VDD/VSS pair, and bond the exposed thermal pad to a continuous ground plane that is stitched with vias every 5-10 mm. Without proper decoupling, the ADC exhibits > 2 LSB noise at full-scale conversions.
Estimated: at 70 MHz with all peripherals active and 3.3V VDD, the PIC24EP32GP202-I/MM core current is roughly 30-40 mA. With the VQFN-S exposed pad soldered to a 1 sq inch ground pour on a 4-layer FR4 board, theta_JA is in the 35-40 C/W range, giving a junction temperature rise of approximately 10-15 C above ambient. No heatsink is required, but omitting the thermal pad bond will push theta_JA above 80 C/W and risk thermal shutdown in enclosed housings.
Route the ICSP pins PGED1/PGEC1 to a dedicated 2x3 header or test pad group, keeping the trace length under 50 mm and the lines impedance-matched to 33 ohm series resistors as recommended by Microchip. Keep the 12-bit ADC analog traces short and away from PWM/UART switching signals; add a ground guard trace around sensitive analog inputs. Failure to separate analog and digital return currents degrades ADC SNR by 6-10 dB.
Do not leave the MCLR pin floating - it must have a 10 kohm pull-up to VDD or be driven by the on-chip voltage supervisor, otherwise random resets will occur. Also note that the VQFN exposed pad (EP) is pin 29 and must be soldered to ground; leaving it unsoldered causes thermal runaway and reduces Flash programming reliability. Always erase-and-program the configuration bits in the same ICP session as the application Flash, otherwise the oscillator and watchdog settings revert to safe-but-unusable defaults.
تعمیل کی معلومات
RoHS and REACH compliance per Microchip product page. -I grade is industrial (not AEC-Q100). For AEC-Q100 automotive qualification use the -E grade variant instead. Lead-free and halogen-free per Microchip packaging data.
