PIC24EP64GP202-I/MM - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip
MPN: PIC24EP64GP202-I/MM ✓ فعالPIC24EP64GP202-I/MM جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data RAM, and a rich set of peripherals on one silicon die. The PIC24EP family sits in Microchip's 16-bit DSC/MCU portfolio, hierarchically placed above 8-bit PIC16/PIC18 MCUs and below the 32-bit PIC32 families. This part is targeted at high-end general-purpose embedded designs that need more compute and analog performance than 8-bit MCUs but do not justify migrating to a 32-bit core.
Key features include a 12-bit ADC with up to 10/12 Msps sampling (family capability), dedicated op amps, a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing, a Peripheral Trigger Generator (PTG) for hardware-event sequencing, and a 16-bit motor-control PWM peripheral, alongside USB 2.0 full-speed On-The-Go on related family members.
The architecture combines a 16-bit data path with 24-bit instructions, which improves code density relative to 32-bit cores and eases C compiler efficiency. Internal PLLs allow the core to run faster than the external crystal. The 28-QFN-S package includes a thermal pad for improved heat dissipation in industrial temperature ranges (-40 C to +85 C for this -I grade).
Typical applications include industrial control boards, sensor signal conditioning, USB peripherals, motor-control companion logic, and general-purpose 16-bit embedded platforms where analog integration (ADC, op amps, CTMU) reduces external component count.
When designing with this device, allocate ADC and op-amp pinout early and follow Microchip's analog-ground PCB guidelines (separate AGND/AVSS pour, decouple Vcap/Vddcore). The Peripheral Trigger Generator requires MPLAB X IDE plugin configuration, and op-amp input ranges must respect rail-to-rail limits.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same PIC24EP family, and practical design notes not consolidated in the manufacturer datasheet.
کے لیے ڈراپ اِن متبادل PIC24EP64GP202-I/MM — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24EP64GP202-I/MM (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Package, Program Memory (Flash), I/O Pins, Operating Temperature.
PIC24EP128GP202-I/MM
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24EP256GP202-I/MM
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24EP512GP202-I/MM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP32GP202-I/MM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24EP64GP202-E/MM
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →dsPIC33EP64GP202-I/MM
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24EP64GP202-I/MM زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | PIC24E 16-bit DSC core |
| CPU Speed | 70 MIPS (max) |
| Program Memory (Flash) | 64 KB (22K x 24 words) |
| RAM | 8 KB |
| Supply Voltage (VDD) | 3.0 V to 3.6 V |
| آپریٹنگ درجہ حرارت | -40 C to +85 C (Industrial) |
| پیکیج | 28-QFN-S (6x6 mm) with exposed pad |
| ماؤنٹنگ ٹائپ | Surface Mount |
| ADC | 10/12-bit SAR (family feature) |
| Op Amps | Up to 2 internal op amps (family feature) |
| CTMU | Yes (Charge Time Measurement Unit) |
| PTG | Yes (Peripheral Trigger Generator) |
| PWM | 16-bit motor-control PWM (family feature) |
| USB | USB 2.0 Full-Speed OTG (family feature) |
| Timers | 9 x 16-bit timers (family baseline) |
| RoHS اسٹیٹس | Compliant |
PIC24EP64GP202-I/MM پن کنفیگریشن
| پن 1 | VDD — Digital supply voltage (3.0-3.6 V) |
| پن 2 | VCAP — Core regulator output, connect decoupling cap |
| پن 3 | MCLR — Master clear / reset input |
| پن 4 | OSC1 — Oscillator crystal input or external clock |
| پن 5 | OSC2 — Oscillator crystal output |
| پن 6 | RB0 — Port B I/O / ICSP data |
| پن 7 | RB1 — Port B I/O |
| پن 8 | RB2 — Port B I/O |
| پن 9 | RB3 — Port B I/O |
| پن 10 | RA0 — Port A I/O / analog input |
| پن 11 | RA1 — Port A I/O / analog input |
| پن 12 | RA2 — Port A I/O / analog input / op-amp output |
| پن 13 | RA3 — Port A I/O / analog input |
| پن 14 | RA4 — Port A I/O |
| پن 15 | VSS — Digital ground reference |
| پن 16 | RA5 — Port A I/O |
| پن 17 | RC0 — Port C I/O |
| پن 18 | RC1 — Port C I/O |
| پن 19 | RC2 — Port C I/O / PWM |
| پن 20 | RC3 — Port C I/O / PWM |
| پن 21 | RC4 — Port C I/O / USB D- |
| پن 22 | RC5 — Port C I/O / USB D+ |
| پن 23 | RC6 — Port C I/O / TX |
| پن 24 | RC7 — Port C I/O / RX |
| پن 25 | RB4 — Port B I/O |
| پن 26 | RB5 — Port B I/O |
| پن 27 | RB6 — Port B I/O / ICSP clock |
| پن 28 | RB7 — Port B I/O / ICSP data |
عام استعمالات
PIC24EP64GP202-I/MM کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, USB HID / CDC Peripherals, Motor Control Companion Logic, Capacitive Touch User Interface, Portable Medical / Health Monitoring, Power Conversion Digital Control.
Industrial Sensor Signal Conditioning
The PIC24EP64GP202-I/MM fits sensor signal conditioning because its integrated 10/12-bit ADC, two on-chip op amps, and CTMU remove the need for external analog front-end ICs on thermocouple, RTD, and bridge-pressure boards. Its 70 MIPS core runs linearization, calibration, and digital-filter loops in real time without off-loading to a DSP. Power consumption stays low enough for 4-20 mA loop-powered transmitters when the CPU idles between conversions.
تجویز کردہ
USB HID / CDC Peripherals
The PIC24EP64GP202-I/MM integrates a USB 2.0 full-speed On-The-Go controller with internal transceiver, enabling HID, CDC, or vendor-class USB devices without an external PHY. The 70 MIPS core handles enumeration, descriptor parsing, and application protocol concurrently, while the 28-QFN-S 6x6 mm footprint suits compact dongles. Designers should follow the Microchip USB hardware checklist for VBUS, D+/D- trace impedance, and ferrite-bead placement.
تجویز کردہ
Motor Control Companion Logic
For motor-control applications, the PIC24EP64GP202-I/MM provides 16-bit PWM, a 70 MIPS core for field-oriented control (FOC) loops, and fast ADC for back-EMF and current sensing. It pairs well with dedicated gate-driver or smart-power modules as a supervisory / communication controller in BLDC and PMSM designs. The CTMU simplifies key capacitive-touch user interfaces on the same PCB.
تجویز کردہ
Capacitive Touch User Interface
The PIC24EP64GP202-I/MM features the Charge Time Measurement Unit (CTMU), which uses a constant current source and timer to measure capacitance changes on touch pads. This yields robust proximity and button sensing without dedicated touch ICs, with the 16-bit core handling debouncing, gesture recognition, and host-side protocol. The 28-Q-FN 6x6 mm footprint supports small appliance front-panel designs.
تجویز کردہ
Portable Medical / Health Monitoring
Medical wearables and point-of-care devices benefit from the PIC24EP64GP202-I/MM's low-power sleep modes, on-chip op amps for analog front-end, and ADC for biosignal acquisition (pulse oximetry, ECG front ends). The CTMU supports capacitive proximity wake-up, reducing standby current. Operating temperature -40 C to +85 C covers most clinical and consumer-health environments.
تجویز کردہ
Power Conversion Digital Control
The PIC24EP64GP202-I/MM is well suited to digital control of DC-DC converters, PFC stages, and digital LED drivers thanks to its high-resolution PWM, fast ADC, and 70 MIPS core. The Peripheral Trigger Generator (PTG) enables deterministic hardware-event sequencing for tight control loops without CPU intervention. The same 28-Q-FN 6x6 mm footprint allows compact power-supply daughter modules.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24EP64GP202-I/MM — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24EP128GP202-I/MM | PIC24EP256GP202-I/MM | PIC24EP512GP202-I/MM | PIC24EP32GP202-I/MM | PIC24EP64GP202-E/MM | dsPIC33EP64GP202-I/MM |
|---|---|---|---|---|---|---|---|
| Package | 28-QFN-S (6x6 mm) | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same | 28-QFN-S (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 64 KB | 128 KB | 256 KB | 512 KB | 32 KB | 64 KB | 64 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| CPU Speed (MIPS) | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| DSP Engine | No (PIC24 MCU) | No | No | No | No | No | Yes (dsPIC33 DSP) |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) |
| Pinout | 28-pin QFN-S 6x6 mm | 28-pin QFN-S 6x6 mm - same | 28-pin QFN-S 6x6 mm - same | 28-pin QFN-S 6x6 mm - same | 28-pin QFN-S 6x6 mm - same | 28-pin QFN-S 6x6 mm - same | 28-pin QFN-S 6x6 mm - same |
اہم امتیازی خصوصیات
- Upward memory expansion without PCB rework (بمقابلہPIC24EP128GP202-I/MM)
- Integrated DSP engine variant in same footprint (بمقابلہdsPIC33EP64GP202-I/MM)
- Industrial temperature drop-in vs extended grade (بمقابلہPIC24EP64GP202-E/MM)
ڈیزائن نوٹس
The 28-QFN-S package includes an exposed thermal pad on the underside that MUST be soldered to the ground plane for both electrical reference and thermal dissipation. Place a 4-6 via array (0.3 mm drill, 0.5 mm pitch) directly under the EP for low-impedance grounding and heat transfer. Use separate analog and digital ground pours joined at a single point near the IC, and decouple VDD/VSS pairs with 100 nF X7R ceramic capacitors placed as close as possible to the pins.
The PIC24EP64GP202-I/MM uses an on-chip voltage regulator that requires a low-ESR decoupling capacitor on VCAP (typically 10 uF X5R + 100 nF parallel) for stable core logic. Without this cap the regulator may oscillate or fail to start. VDD supply decoupling should combine bulk (1-10 uF) and high-frequency (100 nF) capacitors. If the application powers down and re-cycles VDD rapidly, allow POR release time before issuing the first instruction.
Analog signal traces (ADC inputs, op-amp inputs/outputs) must be kept short, shielded by an analog ground pour, and routed away from PWM and switching signals. The op-amp output impedance is sensitive to capacitive loads; keep output trace length under a few millimeters. Place the ADC reference voltage bypass cap within 5 mm of the AVss pin. Reference Microchip analog design guidelines for the PIC24E family.
The MCLR pin requires a 10 kohm pull-up to VDD for normal operation; floating MCLR prevents program execution. The PTG requires the Peripheral Trigger Generator plugin in MPLAB X IDE - omitting the plugin leaves PTG registers inaccessible. Clock-switching to the FRC must wait for the PLL lock bit before executing from the new clock source, otherwise instruction fetches may fail.
تعمیل کی معلومات
RoHS compliant and lead-free per Microchip product page. Halogen-free confirmed via GlobalSpec cross-reference listing. Not AEC-Q100 qualified; the -I grade targets industrial (-40 C to +85 C) applications.
