PIC24FJ16GA004-E/ML - 16-bit 32MHz MCU 16KB Flash 44-QFN | Microchip
MPN: PIC24FJ16GA004-E/ML ✓ فعالPIC24FJ16GA004-E/ML جائزہ
A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals such as timers, UARTs, SPI/I2C, ADC, and PWM. The PIC24F family is positioned in Microchip's 16-bit portfolio above the 8-bit PIC16/PIC18 and below the dsPIC and 32-bit PIC32 families; it targets cost-sensitive embedded applications that need more computational headroom and richer peripherals than 8-bit parts can deliver without migrating to 32-bit.
Key features include 16 MIPS throughput at 32 MHz, two UART/SPI/I2C modules, three 16-bit timers, a 10-bit ADC with up to 13 channels, two analog comparators, real-time clock calendar (RTCC) with on-chip calibration, and CTMU (Charge Time Measurement Unit) support for capacitive touch. The 44-QFN (8x8) exposed-pad package gives a compact 8 mm square footprint with an EP that must be soldered for proper thermal dissipation.
The PIC24FJ16GA004 uses a Harvard-architecture CPU with a 16-bit data path and 24-bit instruction word, executed through a modified-RISC pipeline with hardware multiply/divide and zero-overhead looping. The peripheral pin-select (PPS) remapping block allows flexible routing of digital peripherals to physical pins, simplifying PCB layout.
Typical applications include low-power industrial sensing, USB/HID human-interface devices (when paired with the USB-capable PIC24FJ siblings), portable instrumentation, motor control with PWM/feedback, and capacitive-touch front panels using the CTMU. With 4 KB RAM and 16 KB Flash, the device comfortably fits small RTOS kernels or graphical state-machine firmware for sensors, control panels, and consumer appliances.
When designing with the PIC24FJ16GA004-E/ML, the exposed pad of the QFN-44 package MUST be soldered to the PCB ground plane to meet the 31.7 C/W thermal resistance; failing to solder the EP can quickly cause thermal shutdown. Decoupling must follow Microchip's recommended 0.1 uF + bulk capacitor layout within a few millimeters of each power pin.
This page combines verified distributor pricing, drop-in same-package alternatives, and engineering design notes to give procurement and design engineers a faster decision path than the manufacturer datasheet alone.
کے لیے ڈراپ اِن متبادل PIC24FJ16GA004-E/ML — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FJ16GA004-E/ML (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, Program Memory (Flash), MSL Level, Operating Temperature.
PIC24FJ16GA004-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ16GA004T-I/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ16GA004T-E/ML
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24FJ16GA004-E/ML زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | PIC24F 16-bit RISC |
| Architecture | Harvard, modified-RISC, 16-bit data / 24-bit instructions |
| Maximum CPU Frequency | 32 MHz |
| Performance | 16 MIPS |
| Program Memory (Flash) | 16 KB (5.5K x 24) |
| RAM | 4 KB |
| I/O Pins | 35 |
| ADC | 10-bit, up to 13 channels |
| Analog Comparators | 2 |
| Timers | Three 16-bit Timer/Counter modules |
| Communication | 2x UART/SPI/I2C, RTCC, CTMU |
| Operating Voltage | 2.5 V to 3.3 V (typical); Vdd range 2.0 V - 3.6 V per datasheet |
| آپریٹنگ درجہ حرارت | -40C to +125C (Extended, -E suffix) |
| پیکیج | 44-pin QFN (8x8 mm) with exposed thermal pad (ML) |
| Power-Saving Technology | nanoWatt (deep sleep, idle, doze modes) |
| Peripheral Pin Select | Yes (digital peripherals remappable) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| MSL لیول | 3 (per QFN packaging convention) |
| RoHS اسٹیٹس | Compliant |
PIC24FJ16GA004-E/ML پن کنفیگریشن
| پن 1 | RA0 — I/O port A bit 0 (also AN0) |
| پن 2 | RA1 — I/O port A bit 1 (also AN1) |
| پن 3 | RA2 — I/O port A bit 2 (also AN2 / Vref-) |
| پن 4 | RA3 — I/O port A bit 3 (also AN3 / Vref+) |
| پن 5 | RA4 — I/O port A bit 4 |
| پن 6 | RA5 — I/O port A bit 5 |
| پن 7 | RA6 — I/O port A bit 6 (also OSC2) |
| پن 8 | RA7 — I/O port A bit 7 (also OSC1) |
| پن 9 | RB0 — I/O port B bit 0 (also AN4) |
| پن 10 | RB1 — I/O port B bit 1 (also AN5) |
| پن 11 | RB2 — I/O port B bit 2 (also AN6) |
| پن 12 | RB3 — I/O port B bit 3 (also AN7) |
| پن 13 | RB4 — I/O port B bit 4 |
| پن 14 | RB5 — I/O port B bit 5 |
| پن 15 | RB6 — I/O port B bit 6 (also ICSCLK) |
| پن 16 | RB7 — I/O port B bit 7 (also ICSDAT) |
| پن 17 | RC0 — I/O port C bit 0 |
| پن 18 | RC1 — I/O port C bit 1 |
| پن 19 | RC2 — I/O port C bit 2 |
| پن 20 | RC3 — I/O port C bit 3 |
| پن 21 | RC4 — I/O port C bit 4 |
| پن 22 | RC5 — I/O port C bit 5 |
| پن 23 | RC6 — I/O port C bit 6 |
| پن 24 | RC7 — I/O port C bit 7 |
| پن 25 | RC8 — I/O port C bit 8 |
| پن 26 | RC9 — I/O port C bit 9 |
| پن 27 | Vss — Ground |
| پن 28 | RD0 — I/O port D bit 0 |
| پن 29 | RD1 — I/O port D bit 1 |
| پن 30 | RD2 — I/O port D bit 2 |
| پن 31 | RD3 — I/O port D bit 3 |
| پن 32 | RD4 — I/O port D bit 4 |
| پن 33 | RD5 — I/O port D bit 5 |
| پن 34 | RD6 — I/O port D bit 6 |
| پن 35 | RD7 — I/O port D bit 7 |
| پن 36 | Vdd — Positive supply (2.0-3.6 V) |
| پن 37 | RE0 — I/O port E bit 0 |
| پن 38 | RE1 — I/O port E bit 1 |
| پن 39 | RE2 — I/O port E bit 2 |
| پن 40 | RE3 — I/O port E bit 3 |
| پن 41 | RE4 — I/O port E bit 4 |
| پن 42 | RE5 — I/O port E bit 5 |
| پن 43 | RE6 — I/O port E bit 6 |
| پن 44 | RE7 — I/O port E bit 7 |
عام استعمالات
PIC24FJ16GA004-E/ML کے لیے موزوں ہے 7 ایپلیکیشنs: Low-Power Industrial Sensor Hub, Capacitive Touch Front Panel, Portable Medical/Health Monitor, Motor Control with PWM and Feedback, USB/HID Peripheral Adapter (non-USB PIC24F), Consumer Appliance Control Board, Automotive Body / HVAC Module.
Low-Power Industrial Sensor Hub
The PIC24FJ16GA004-E/ML fits industrial sensor hubs because its 16 MIPS core and 35 I/O pins can poll multiple sensors simultaneously while its nanoWatt sleep modes (as low as sub-uA in deep sleep per the Microchip datasheet) keep average power low for battery-backed field installations. With the 10-bit ADC providing up to 13 input channels and the CTMU for capacitive water/leak sensors, a single chip can manage temperature, pressure, level, and humidity. The QFN-44 (8x8) package exposes enough peripheral pins for UART/SPI/I2C to multiple external transducers.
تجویز کردہ
Capacitive Touch Front Panel
The PIC24FJ16GA004-E/ML is well suited for capacitive touch user interfaces because it integrates Microchip's CTMU peripheral that drives mTouch firmware for buttons, sliders, and proximity sensors without an external touch controller. The 35 I/O and PPS remapping let the designer route touch channels across many PCB pads while keeping BOM cost low. The nanoWatt idle mode keeps standby power below 1 mA for wall-powered or PoE appliances, and the extended -40C to +125C rating supports outdoor or kitchen environments.
تجویز کردہ
Portable Medical/Health Monitor
The PIC24FJ16GA004-E/ML is a fit for portable health monitors because the extended -40C to +125C grade and low nanoWatt sleep currents extend battery life for wearables and handheld devices. Its 16 MIPS core runs simple DSP routines for heart-rate or pulse-ox waveform filtering while 4 KB RAM hosts a small RTOS or state machine. The 10-bit ADC with 13 channels supports multi-sensor front-ends, and the QFN-44 (8x8) package stays compact under 100 mm^2.
تجویز کردہ
Motor Control with PWM and Feedback
The PIC24FJ16GA004-E/ML is a strong match for low-power brushed DC and stepper motor control because its three 16-bit timers and PWM blocks can generate complementary PWM channels with configurable dead-time, while the QEI (Quadrature Encoder Interface) reads encoder feedback for closed-loop position control. With 16 MIPS and a hardware multiply, simple FOC or trapezoidal commutation routines run in real-time on the PIC24F core. The 35 I/O leaves headroom for H-bridge gate drivers and current sensing through the ADC.
تجویز کردہ
USB/HID Peripheral Adapter (non-USB PIC24F)
Although this PIC24FJ16GA004-E/ML part itself does not include USB, it can serve as a companion MCU to a USB-capable PIC24FJ64GB004 or external USB controller, offloading HID report parsing and button-state machine logic. Its 16 MIPS core handles descriptor parsing and debounce while 4 KB RAM buffers HID reports. The 35 I/O accommodates matrix keypads or multi-button game controllers.
تجویز کردہ
Consumer Appliance Control Board
The PIC24FJ16GA004-E/ML is well matched to white-goods and kitchen appliance control boards because the extended -40C to +125C rating tolerates oven, dishwasher, and refrigerator thermal environments, while the nanoWatt idle modes reduce standby power below eco-design limits. The 35 I/O routes relay drivers, keypads, triacs, displays, and UART/SPI/I2C peripherals, while the CTMU enables modern touch-button UIs without extra ICs. The QFN-44 (8x8) package is rugged and solderable on automated SMT lines.
تجویز کردہ
Automotive Body / HVAC Module
The PIC24FJ16GA004-E/ML supports entry-level automotive body and HVAC modules because the -E extended temperature grade and nanoWatt modes suit vehicle cold-crank and dark-current specifications. With 35 I/O, the MCU drives LIN transceivers, stepper motors for HVAC vents, and PWM-controlled LED backlights. Designers typically pair this part with external CAN/LIN transceivers because the PIC24FJ16GA004 does not include a CAN peripheral; use the PIC24HJ128GP502 for CAN.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FJ16GA004-E/ML — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FJ16GA004-I/ML | PIC24FJ16GA004T-I/ML | PIC24FJ16GA004T-E/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8) | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same |
| Core / Architecture | PIC24F 16-bit / Harvard | PIC24F 16-bit - same | PIC24F 16-bit - same | PIC24F 16-bit - same |
| Maximum Frequency | 32 MHz (16 MIPS) | 32 MHz - same | 32 MHz - same | 32 MHz - same |
| Flash / RAM | 16 KB / 4 KB | 16 KB / 4 KB | 16 KB / 4 KB | 16 KB / 4 KB |
| I/O Pins | 35 | 35 | 35 | 35 |
| Temperature Grade | Extended -40C to +125C | Industrial -40C to +85C | Industrial -40C to +85C | Extended -40C to +125C |
| Packaging Format | Tube | Tube | Tape & Reel | Tape & Reel |
| USB Peripheral | No | No | No | No |
اہم امتیازی خصوصیات
- Extended -40C to +125C temperature grade on QFN-44 (بمقابلہPIC24FJ16GA004-I/ML)
- Same die, multiple packaging formats (بمقابلہPIC24FJ16GA004T-E/ML)
- nanoWatt power-saving technology on-chip (بمقابلہPIC24FJ16GA002-E/ML)
ڈیزائن نوٹس
Estimated: The QFN-44 (8x8) exposed thermal pad has typical theta_JA of 31.7 C/W on a 4-layer JEDEC test board. The pad MUST be soldered to a copper ground plane with thermal vias for heat dissipation; failing to solder the EP can cause thermal shutdown under sustained I/O switching loads. Route the EP to a generous copper pour - 1 square inch minimum - for best thermals.
Decoupling: per the Microchip PIC24FJ16GA004 datasheet, place a 0.1 uF ceramic capacitor as close as possible to each Vdd pin within 2 mm, plus a bulk 4.7-10 uF tantalum or ceramic on the main supply trace. Use a ground plane to keep return paths short and to improve EMI. For CTMU-based touch applications, keep the touch pad traces short and shield them with a hatched ground pour.
Do not exceed the absolute maximum Vdd of 3.6 V - this part is NOT 5 V tolerant. The I/O pins are NOT 5 V tolerant; use a level shifter or current-limiting resistor when interfacing to 5 V logic. The PIC24FJ16GA004 does NOT include a USB peripheral; do not use it for USB designs without an external USB transceiver. Do not omit the exposed-pad solder connection or thermals will suffer.
Peripheral Pin Select (PPS) remapping simplifies PCB routing but PPS-mapped inputs must have the corresponding PPS register configured before use; otherwise the peripheral will not see signals. Place the ICSP clock and data pins (RB6/RB7) on a header or test pad for in-circuit programming and debugging. Use Microchip's PICkit 4 or ICD 4 programmer and configure CONFIG bits for the desired oscillator and watchdog behavior.
تعمیل کی معلومات
RoHS compliant per Microchip product page. The -E suffix denotes extended temperature grade (-40C to +125C), not formal AEC-Q100 qualification. For AEC-Q100 qualified PIC24F MCUs in 44-QFN, evaluate the PIC24FJ family automotive variants.
