PIC24FJ256GB412T-I/BG - 256KB Flash 16-bit XLP USB MCU | Microchip
MPN: PIC24FJ256GB412T-I/BG ✓ فعالPIC24FJ256GB412T-I/BG جائزہ
What is a PIC24FJ 16-bit microcontroller? The PIC24FJ is Microchip's 16-bit modified-Harvard MCU family that sits between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts in the broader microcontroller hierarchy (MCU -> 16-bit MCU -> microcontroller -> embedded IC -> semiconductor). Devices in this family combine deterministic interrupt latency with low-power operation and rich peripherals, making them well suited to battery-powered IoT and human-interface products.
Key features include 256 KB dual-partition Flash (allowing live firmware updates), 16 KB SRAM, hardware AES/SHA cryptographic acceleration, USB 2.0 On-The-Go with PHY, segmented LCD driver (up to 512 segments depending on package), eXtreme Low Power modes with nanoWatt technology, multiple timers, 12-bit ADC, and peripheral pin select. The 121-pin TFBGA package exposes the maximum peripheral count and pin count for this family.
Architecturally, the device uses a modified Harvard core with separate program and data paths, hardware multiply/divide, and a 16-bit wide instruction set. Dual-partition Flash supports a bootloader plus live application update, while the cryptographic engine accelerates AES, DES, SHA and HMAC operations without CPU overhead, offloading security-critical work and reducing time spent in active mode.
Typical applications include secure IoT edge nodes, USB peripherals (HID, CDC, mass storage, audio), battery-powered metering and wearables with LCD displays, secure payment terminals, and home appliances needing crypto-authenticated firmware updates. The integrated USB OTG eliminates external PHY cost in dongle-style designs.
When designing with this device, budget for decoupling capacitors on every VDD/VSS pair and follow Microchip's TFBGA PCB layout guidelines for proper BGA fanout and via-in-pad or microvia escape routing. Operating voltage is 2.0 V to 3.6 V; verify your LCD charge-pump and USB signal integrity with the family data sheet DS30010089E.
This page synthesizes distributor pricing, parametric comparisons, and practical design notes for engineers evaluating the PIC24FJ256GB412T-I/BG, complementing the official Microchip data sheet.
کے لیے ڈراپ اِن متبادل PIC24FJ256GB412T-I/BG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FJ256GB412T-I/BG (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, Core Architecture, Program Memory (Flash), Operating Temperature.
PIC24FJ256GB412-I/BG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ128GB412T-I/BG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ256GA610T-I/BG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ1024GB610-I/BG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ256GB610T-I/BG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24FJ128GA610T-I/BG
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ256GB412T-I/BG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | PIC24F 16-bit modified Harvard |
| Program Flash Memory | 256 KB (dual partition) |
| SRAM | 16 KB |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Operating Voltage | 2.0 V to 3.6 V |
| Cryptographic Engine | Hardware AES/DES/SHA/HMAC |
| USB Interface | USB 2.0 On-The-Go with PHY |
| LCD Driver | Segmented LCD, up to 512 segments (package dependent) |
| ADC | 12-bit A/D converter |
| Timers | Multiple 16-bit and 32-bit timers |
| پیکیج | 121-pin TFBGA (10x10x1.20 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount (Tape and Reel, "T" suffix) |
| آپریٹنگ درجہ حرارت | -40 C to +85 C (Industrial, "I") |
| Low-Power Technology | eXtreme Low Power (XLP), nanoWatt |
| Peripheral Pin Select | Yes (PPS) |
| RoHS اسٹیٹس | Compliant |
PIC24FJ256GB412T-I/BG 121-pin tfbga (10x10x1.20 mm) پن کنفیگریشن گائیڈ
PIC24FJ256GB412T-I/BG (121-pin tfbga (10x10x1.20 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC24FJ256GB412T-I/BG.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
PIC24FJ256GB412T-I/BG کے لیے موزوں ہے 6 ایپلیکیشنs: Secure IoT Edge Nodes, USB Human Interface Devices, Battery-Powered Metering with LCD, Secure Payment Terminals, Medical Wearables, Home Appliance HMI with Crypto.
Secure IoT Edge Nodes
The PIC24FJ256GB412T-I/BG fits secure IoT edge nodes through its integrated hardware cryptographic engine (AES, DES, SHA, HMAC) which offloads TLS handshakes from the CPU. Its 256 KB dual-partition Flash supports OTA firmware updates while one partition remains active, eliminating downtime during secure firmware rollout. XLP nanoWatt technology reduces sleep current to microamp levels, enabling multi-year coin-cell operation for connected sensors.
تجویز کردہ
USB Human Interface Devices
USB 2.0 On-The-Go with on-chip PHY allows the PIC24FJ256GB412T-I/BG to implement HID, CDC, mass storage, and audio-class USB peripherals without an external ULPI chip. The 16 MIPS core runs Microchip's USB stack with low interrupt latency, while 16 KB SRAM buffers USB packets comfortably. Active current stays low enough for bus-powered peripherals that meet USB suspend requirements.
تجویز کردہ
Battery-Powered Metering with LCD
The integrated segmented LCD driver eliminates external charge-pump and segment-driver ICs in metering designs, while XLP sleep currents below 1 microamp extend battery life across multi-year deployments. 256 KB Flash stores calibration tables and rolling interval logs. PPS remaps analog and digital peripherals to avoid LCD segment pin conflicts during PCB layout.
تجویز کردہ
Secure Payment Terminals
Hardware AES/SHA acceleration on the PIC24FJ256GB412T-I/BG performs PIN-block encryption and MAC computation without exposing keys in software, supporting PCI PTS payment-terminal architectures. Segmented LCD directly drives transaction prompts without an auxiliary display controller. The 121-pin BGA exposes USB, secure smart-card UART, and tamper inputs on a compact board.
تجویز کردہ
Medical Wearables
XLP technology drives the PIC24FJ256GB412T-I/BG into nanoamp sleep between sensor samples, enabling continuous health monitoring for days on small Li-ion batteries. The 12-bit ADC captures bioelectric signals with adequate resolution for heart-rate and SpO2 front-ends, and segmented LCD shows real-time vitals on the wearable display without a separate graphics controller.
تجویز کردہ
Home Appliance HMI with Crypto
Authenticating firmware updates for connected appliances is critical for consumer safety. The PIC24FJ256GB412T-I/BG's hardware crypto engine verifies signed firmware blobs during OTA updates, while the LCD driver renders touch-and-turn UI prompts. USB OTG enables factory provisioning via a standard micro-USB cable, and XLP idle currents keep standby power under 0.5 W for energy-star compliance.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FJ256GB412T-I/BG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FJ256GB412-I/BG | PIC24FJ128GB412T-I/BG | PIC24FJ256GA610T-I/BG |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 121-TFBGA (10x10x1.20 mm) | 121-TFBGA (BG) - same | 121-TFBGA (BG) - same | 121-TFBGA (BG) - same |
| Flash Memory | 256 KB | 256 KB | 128 KB (-50%) | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 32 KB (+100%) |
| USB OTG | Yes (USB 2.0 OTG with PHY) | Yes | Yes | No |
| Hardware Crypto | AES/DES/SHA/HMAC | AES/DES/SHA/HMAC | AES/DES/SHA/HMAC | AES/DES/SHA/HMAC |
| Maximum CPU Speed | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) | 32 MHz (16 MIPS) |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Pricing (1pc, approx) | $8.20 | $8.20 (same die) | $7.30 (smaller Flash) | $9.10 (more RAM) |
اہم امتیازی خصوصیات
- Hardware cryptographic engine integrated on-chip (بمقابلہPIC24FJ256GA412 (no crypto engine))
- Dual-partition Flash for live firmware updates (بمقابلہSingle-partition PIC24F MCUs)
- USB 2.0 OTG with on-chip PHY (بمقابلہPIC24FJ256GA610 (no USB OTG))
ڈیزائن نوٹس
The 121-ball TFBGA at 0.5 mm pitch requires 4-layer PCB with 0.8 mm microvia escape or via-in-pad construction per Microchip's BGA layout guidelines. Fanout signals directly to inner layers; route the USB DP/DM differential pair as 90 ohm impedance-controlled traces no longer than 50 mm and place the ESD protection diode within 5 mm of the connector.
Place 100 nF X7R decoupling capacitors on every VDD/VSS pair as close as physically possible to the BGA balls - the 121-pin BGA has multiple supply pairs that all need local bypass. Add a single 4.7 uF bulk capacitor near the device. Keep analog AVDD and digital VDD separated by ferrite beads to prevent digital switching noise coupling into ADC measurements.
Do not exceed 3.6 V on any I/O pin - the PIC24FJ256GB412T-I/BG is a 3.3 V part and is not 5 V tolerant. USB VBUS sensing requires the internal USB regulator to be enabled via configuration bits; failing to do so causes USB enumeration failure. The crypto engine must be enabled through the CFGWORD fuse before AES instructions will execute.
USB 2.0 DP/DM traces must be 90 ohm differential with no more than one via per trace; route over a continuous ground plane with no splits. LCD segment traces are high-impedance and susceptible to coupling; keep them away from switching signals like PWM or USB and add ground shielding where segment lines cross noisy regions.
Estimated: at full 32 MHz operation the PIC24FJ256GB412T-I/BG draws around 15 mA active, dissipating roughly 50 mW at 3.3 V. The 121-ball TFBGA has adequate thermal performance for this dissipation level; no heatsink is required for industrial temperature operation. However, in sealed enclosures above +60 C ambient, derate to 16 MIPS or enable XLP idle between compute bursts.
تعمیل کی معلومات
ROHS3 Compliant per full-electronic.com listing. Industrial temperature grade (-40 C to +85 C). Not AEC-Q100 qualified - choose AEC-Q100 qualified PIC24 variants for automotive applications.
