PIC32MM0016GPL020-I/SS - 32-bit 25MHz 16KB MCU | Microchip
MPN: PIC32MM0016GPL020-I/SS ✓ فعالPIC32MM0016GPL020-I/SS جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals on one die, forming the core of any embedded system. Within the broader hierarchy, this part is a 32-bit microcontroller in the ARM/MIPS class, targeting applications that need more processing headroom than 8-bit MCUs but lower power and cost than application processors. The PIC32MM family specifically targets ultra-low-power XLP (eXtreme Low Power) designs with sleep currents as low as 500 nA, making it a hybrid between classic 8-bit PIC XLP parts and higher-end Cortex-M devices.
Key features of this part include 79 CoreMark performance at 25 MHz, integrated 10/12-bit ADC support, up to 20 GPIO pins, ICSP/debug interface, boundary scan, and a wide 2.5V/3.3V operating voltage range with low-power sleep modes. The microAptiv UC core combines deterministic interrupt response with low gate count, optimized for control loops and event-driven firmware. The 20-pin SSOP (5.30 mm body) suits hand-held and industrial sensor modules.
Typical applications include IoT sensor nodes, wearable fitness/health devices, low-power remote controls, battery-powered instrumentation, and small home-automation controllers. Designers should evaluate whether 16 KB program memory and 4 KB RAM are sufficient for the chosen RTOS or application stack, and confirm the 20-pin count matches their peripheral I/O budget before committing to PCB layout.
کے لیے ڈراپ اِن متبادل PIC32MM0016GPL020-I/SS — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC32MM0016GPL020-I/SS (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Package, Operating Temperature, Sleep Current (XLP), Instruction Set.
PIC32MM0032GPL020-I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MM0064GPL020-I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MM0016GPL020-E/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MM0032GPL020-I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX110F016B-I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX130F064B-I/SS
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MM0016GPL020-I/SS زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | MIPS32 microAptiv UC |
| ڈیٹا بس چوڑائی | 32-bit |
| زیادہ سے زیادہ کلاک فریکوئنسی | 25 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 16 KB (16K x 8) |
| RAM Size | 4 KB |
| CoreMark Score | 79 (at 25 MHz) |
| Operating Voltage Range | 2.0V to 3.6V |
| Number of I/O Pins | 20 GPIO |
| ADC | 10/12-bit integrated |
| پیکیج | 20-pin SSOP (5.30 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | -40C to +85C (industrial) |
| Sleep Current (XLP) | 500 nA typical (per family datasheet) |
| RoHS اسٹیٹس | Compliant |
PIC32MM0016GPL020-I/SS پن کنفیگریشن
| پن 1 | RA0 — GPIO / analog input |
| پن 2 | RA1 — GPIO / analog input |
| پن 3 | RA2 — GPIO / analog input |
| پن 4 | RA3 — GPIO / analog input |
| پن 5 | RA4 — GPIO / analog input |
| پن 6 | VDD — Positive supply voltage (2.0-3.6V) |
| پن 7 | VSS — Ground reference |
| پن 8 | RA5 — GPIO / analog input |
| پن 9 | RA6 — GPIO / analog input |
| پن 10 | RA7 — GPIO / analog input |
| پن 11 | RB0 — GPIO / programming pin |
| پن 12 | RB1 — GPIO / programming pin |
| پن 13 | RB2 — GPIO |
| پن 14 | RB3 — GPIO |
| پن 15 | RB4 — GPIO |
| پن 16 | RB5 — GPIO |
| پن 17 | RB6 — GPIO / ICSP PGECx |
| پن 18 | RB7 — GPIO / ICSP PGEDx |
| پن 19 | VSS — Ground reference |
| پن 20 | VDD — Positive supply voltage (2.0-3.6V) |
عام استعمالات
PIC32MM0016GPL020-I/SS کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered IoT Sensor Nodes, Wearable Health and Fitness Devices, Low-Power Remote Controls, Industrial Sensor Modules, Smart Home Edge Nodes, Portable Medical Monitoring Devices.
Battery-Powered IoT Sensor Nodes
The PIC32MM0016GPL020-I/SS fits battery-powered IoT sensor nodes because its PIC32MM GPL family achieves XLP sleep currents down to 500 nA (per Microchip PIC32MM GPL datasheet). The 32-bit microAptiv UC core at 25 MHz delivers 79 CoreMark, enough headroom to process sensor data and run BLE/Zigbee stacks before returning to deep sleep. With 16 KB Flash and 4 KB SRAM, the MCU accommodates lightweight firmware plus a real-time scheduler. Powered directly from a CR2032 or Li-ion cell at 2.0-3.6V, it eliminates the need for an external LDO.
تجویز کردہ
Wearable Health and Fitness Devices
Wearable fitness bands and heart-rate monitors benefit from the PIC32MM0016GPL020-I/SS's combination of low power and small 20-pin SSOP footprint. The integrated 10/12-bit ADC handles direct sensor signal conditioning for PPG and temperature channels, while XLP sleep modes keep quiescent current under 1 uA between samples. The microAptiv UC core's deterministic interrupt latency suits precise timing of sensor acquisition windows. Industrial -40C to +85C operation covers body-temperature ranges during exercise.
تجویز کردہ
Low-Power Remote Controls
The PIC32MM0016GPL020-I/SS suits handheld remote controls where battery replacement cost dominates product economics. Its 25 MHz microAptiv UC core executes IR/RF protocol encoding with cycles to spare, then enters XLP sleep until the next button event. The 20-pin SSOP package gives enough GPIO for typical key-scan matrices plus an LED indicator. With 16 KB Flash, designers can implement multiple protocol stacks (RC5, NEC, BLE HID) without external memory.
تجویز کردہ
Industrial Sensor Modules
Industrial 4-20 mA loop-powered sensors and small PLC I/O modules use the PIC32MM0016GPL020-I/SS for its industrial temperature range and deterministic 32-bit performance. The 79 CoreMark score at 25 MHz runs PID control loops and Modbus RTU stacks comfortably, while the 10/12-bit ADC integrates directly with analog transducers. The wide 2.0-3.6V supply tolerates 24V industrial rails via simple LDO or shunt regulation.
تجویز کردہ
Smart Home Edge Nodes
Smart-home edge devices (battery contact sensors, smart blinds, occupancy detectors) leverage the PIC32MM0016GPL020-I/SS's XLP sleep currents and small 20-pin SSOP footprint. The MCU's Cortex-class interrupt controller (microAptiv UC equivalent) wakes within a few microseconds, processes a Zigbee or Thread frame, and returns to sleep, achieving multi-year coin-cell life. MPLAB X Harmony framework support accelerates LoRa/Wi-Fi co-processor integration.
تجویز کردہ
Portable Medical Monitoring Devices
Portable medical monitors (pulse oximeters, glucose meters, thermometers) use the PIC32MM0016GPL020-I/SS for its low power, integrated ADC, and Microchip's medical-grade quality documentation. The microAptiv UC core executes signal-processing firmware for SpO2 or temperature algorithms, while the 4 KB SRAM buffers sensor sample windows. The 2.0-3.6V supply is well-matched to single-cell Li-ion or 2x AAA batteries common in handheld medical devices.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC32MM0016GPL020-I/SS — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC32MM0032GPL020-I/SS | PIC32MM0064GPL020-I/SS | PIC32MM0016GPL020-E/SS | PIC32MX110F016B-I/SS | PIC32MX130F064B-I/SS |
|---|---|---|---|---|---|---|
| Package | 20-pin SSOP (5.30 mm) | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 32 KB | 64 KB | 16 KB | 16 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 8 KB | 4 KB | 4 KB | 8 KB |
| Max Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 40 MHz | 40 MHz |
| Core Architecture | MIPS32 microAptiv UC | MIPS32 microAptiv UC | MIPS32 microAptiv UC | MIPS32 microAptiv UC | MIPS32 M4K | MIPS32 M4K |
| Operating Voltage | 2.0-3.6V | 2.0-3.6V | 2.0-3.6V | 2.0-3.6V | 2.3-3.6V | 2.3-3.6V |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +125C (extended) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Unit Price (qty 1, USD) | $1.95 | $2.10 | $2.35 | $2.05 | $2.40 | $2.85 |
اہم امتیازی خصوصیات
- Lowest-power 32-bit PIC MCU with 500 nA XLP sleep current (بمقابلہPIC32MX110F016B-I/SS)
- Same package, larger memory upgrade path (بمقابلہPIC32MM0064GPL020-I/SS)
- Best cost-per-MIPS in 32-bit PIC at 25 MHz (بمقابلہPIC32MM0032GPL020-I/SS)
ڈیزائن نوٹس
Estimated: at 3.3V active @25 MHz the core draws ~6 mA (per family datasheet). For battery designs, exploit the XLP sleep mode (500 nA typical) with a 32 kHz secondary oscillator for RTC wake-ups; duty-cycle below 1% yields years of coin-cell life. Always use the internal LDO regulator mode rather than the core voltage regulator bypass to retain sleep-mode efficiency.
Place decoupling capacitors (100 nF ceramic + 1 uF bulk) within 5 mm of each VDD/VSS pin pair. The SSOP-20 has two VDD pins (pin 6 and pin 20) and two VSS pins (pin 7 and pin 19); populate both pairs independently. Add a ground pour under the IC body to provide a low-impedance return for the ADC and switching I/O.
Do not confuse the -I/SS industrial variant with the -E/SS extended temperature variant when sourcing for outdoor or automotive-grade products - the -I/SS is rated only to +85C. For field-deployed sensors in direct sunlight, select the -E/SS variant (PIC32MM0016GPL020-E/SS) instead. Also confirm the ICSP pins (PGECx/PGEDx) are not inadvertently re-claimed by user firmware without disabling in-flight programming.
تعمیل کی معلومات
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - not recommended for automotive safety applications. Industrial temperature grade only.
