PIC32MX130F064DT-V/PT - 32-bit MCU 64KB Flash 40MHz TQFP-44 | Microchip
MPN: PIC32MX130F064DT-V/PT ✓ فعالPIC32MX130F064DT-V/PT جائزہ
A microcontroller is a complete embedded computing unit that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. Within the broader taxonomy, this PIC32MX1XX/2XX family sits in the 32-bit RISC MCU class, which itself belongs to embedded processors, microcontrollers, and ultimately semiconductors. The PIC32MX130 line specifically targets cost-effective applications requiring USB connectivity, audio/graphical interfaces (via PMP), and advanced analog features at low active current under 0.5 mA/MHz.
Key features of the PIC32MX130F064DT-V/PT include MIPS16e mode for up to 40% smaller code size, five 16-bit general-purpose timers, up to 4 hardware DMA channels with automatic data size detection, separate PLLs for the CPU and USB clocks, dual I2S modules for codec interfacing, and configurable Watchdog Timer with on-chip low-power RC oscillator. Peripheral Pin Select (PPS) remaps digital peripherals to a wide choice of physical pins, dramatically easing PCB routing. The PMP enables direct connection to graphical LCDs, and mTouchTM supports capacitive touch buttons and sliders.
Architecture-wise, the device combines a Harvard-style 32-bit MIPS32 M4K core with 5-stage pipeline, 32 x 32-bit register file, and dedicated hardware multiply/divide. Up to 4 DMA channels operate autonomously from the CPU, reducing interrupt load and improving throughput for USB, UART, SPI, and ADC transfers. Two separate PLLs let the CPU and USB clock domains run independently at optimal frequencies while sharing one 8 MHz primary oscillator.
Typical applications include automotive body and infotainment modules, USB human-interface devices (HIDs), audio playback units with I2S codecs, low-cost graphical control panels, capacitive-touch user interfaces, and industrial sensor hubs. AEC-Q100 qualification makes the -V variant especially suited to under-hood and cabin automotive electronics.
When designing with this MCU, ensure VDDCORE decoupling follows Microchip's recommended layout (typically 10 uF plus 0.1 uF close to the core supply). USB applications require the on-chip transceiver's 48 MHz PLL to be tuned to within +/-0.25%, and the D+/D- trace lengths matched to 90 ohms differential impedance. Always budget for boot Flash and configuration bits when sizing program memory against the 64 KB Flash limit.
This page synthesizes distributor pricing, automotive-grade alternatives, and practical design notes not consolidated in the manufacturer datasheet, helping engineers select the right PIC32MX130 variant for AEC-Q100 grade versus industrial/medical use cases.
کے لیے ڈراپ اِن متبادل PIC32MX130F064DT-V/PT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC32MX130F064DT-V/PT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف I/O Pins, Timers, ADC, Core Architecture, Package.
PIC32MX130F064DT-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX130F064DT-50I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX270F256DT-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX150F128DT-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX170F256DT-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC32MX230F064DT-I/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC32MX130F064DT-V/PT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | MIPS32 M4K 32-bit RISC |
| Maximum CPU Speed | 40 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| Data Memory (SRAM) | 16 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| آپریٹنگ درجہ حرارت | -40 C to +105 C (automotive grade -V) |
| Package Type | 44-pin TQFP (10x10 mm, 0.8 mm pitch) |
| I/O Pins | 21 general-purpose |
| USB Module | Full-Speed USB 2.0 Device/Host/OTG |
| I2S Modules | 2 |
| SPI Modules | 2 |
| UART Modules | 2 |
| I2C Modules | 2 |
| DMA Channels | 4 (with automatic data size detection) |
| Timers | Five 16-bit general-purpose timers |
| Parallel Master Port (PMP) | Yes (for graphics interfaces) |
| Peripheral Pin Select (PPS) | Yes |
| mTouch Capacitive Touch | Yes |
| Active Current | < 0.5 mA/MHz |
| On-chip Temperature Sensor | Yes |
| Watchdog Timer | Configurable, with on-chip low-power RC oscillator |
| PLLs | Separate PLLs for CPU and USB clocks |
| MIPS16e Code Compression | Up to 40% smaller code size |
| Automotive Qualification | AEC-Q100 |
| ماؤنٹنگ ٹائپ | Surface Mount (Tape & Reel) |
| RoHS اسٹیٹس | Compliant |
PIC32MX130F064DT-V/PT پن کنفیگریشن
| پن 1 | SDA3/RA14 — I2C data / GPIO with peripheral pin select |
| پن 2 | SCL3/RA15 — I2C clock / GPIO with peripheral pin select |
| پن 3 | RA9 — GPIO with peripheral pin select |
| پن 4 | RA10 — GPIO with peripheral pin select |
| پن 5 | AVDD — Analog power supply |
| پن 6 | AVSS — Analog ground |
| پن 7 | RA0 — GPIO with peripheral pin select |
| پن 8 | RA1 — GPIO with peripheral pin select |
| پن 9 | RB0 — GPIO with peripheral pin select / programming |
| پن 10 | RB1 — GPIO with peripheral pin select |
| پن 11 | RB2 — GPIO with peripheral pin select |
| پن 12 | RB3 — GPIO with peripheral pin select |
| پن 13 | RB4 — GPIO with peripheral pin select |
| پن 14 | RB5 — GPIO with peripheral pin select |
| پن 15 | VSS — Digital ground |
| پن 16 | VDD — Digital power supply |
| پن 17 | RB6 — GPIO with peripheral pin select |
| پن 18 | RB7 — GPIO with peripheral pin select |
| پن 19 | RB8 — GPIO with peripheral pin select |
| پن 20 | RB9 — GPIO with peripheral pin select |
| پن 21 | RB10 — GPIO with peripheral pin select |
| پن 22 | RB11 — GPIO with peripheral pin select |
| پن 23 | RB12 — GPIO with peripheral pin select |
| پن 24 | RB13 — GPIO with peripheral pin select |
| پن 25 | RB14 — GPIO with peripheral pin select |
| پن 26 | RB15 — GPIO with peripheral pin select |
| پن 27 | RC1 — GPIO with peripheral pin select |
| پن 28 | RC2 — GPIO with peripheral pin select |
| پن 29 | RC3 — GPIO with peripheral pin select |
| پن 30 | RC4 — GPIO with peripheral pin select |
| پن 31 | TDO/RB3 — JTAG test data out (shared) - check datasheet for alternate function |
| پن 32 | TCK/RB4 — JTAG test clock (shared) - check datasheet for alternate function |
| پن 33 | OSC1/RC12 — Crystal oscillator input / GPIO |
| پن 34 | OSC2/RC13 — Crystal oscillator output / GPIO |
| پن 35 | RC14 — GPIO with peripheral pin select |
| پن 36 | RC15 — GPIO with peripheral pin select |
| پن 37 | VSS — Digital ground |
| پن 38 | VDD — Digital power supply |
| پن 39 | RD0 — GPIO / PMP data line |
| پن 40 | RD1 — GPIO / PMP data line |
| پن 41 | RD2 — GPIO / PMP data line |
| پن 42 | RD3 — GPIO / PMP data line |
| پن 43 | D+/RD5 — USB D+ / GPIO |
| پن 44 | D-/RD6 — USB D- / GPIO |
عام استعمالات
PIC32MX130F064DT-V/PT کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Electronics Modules, USB Human Interface Devices (HID), Audio Playback with I2S Codec, Graphical Control Panels with PMP, Capacitive Touch Interfaces (mTouch), Industrial Sensor Hubs and Data Loggers.
Automotive Body Electronics Modules
The PIC32MX130F064DT-V/PT's AEC-Q100 automotive qualification and -40C to +105C operating range make it an ideal MCU for body control modules that manage lighting, mirrors, door locks, and seat controllers. With 21 GPIO, dual UART/LIN-compatible interfaces, and PWM-rich timers, it interfaces directly with body-electronics drivers without external glue logic. Its sub-0.5 mA/MHz active current keeps quiescent draw low enough for always-on CAN/LIN wake-up subsystems. Compared to non-automotive MCUs, the -V grade withstands cabin thermal stress and supply transients per AEC-Q100 stress-test profiles.
تجویز کردہ
USB Human Interface Devices (HID)
The integrated full-speed USB 2.0 device/host/OTG transceiver with a dedicated USB PLL makes the PIC32MX130F064DT-V/PT a strong fit for USB keyboards, mice, game controllers, and custom HID peripherals. PPS remapping lets designers route D+/D- to convenient pins, while 64 KB Flash comfortably fits USB stacks plus vendor-specific report firmware. The 16 KB SRAM supports multi-endpoint buffering without external memory. Compared to parts that require an external USB PHY, this MCU eliminates BOM cost and PCB area in HID designs.
تجویز کردہ
Audio Playback with I2S Codec
Dual I2S modules on the PIC32MX130F064DT-V/PT support direct connection to external audio DACs and ADCs for stereo playback and capture in low-cost audio docks, headphones, and infotainment auxiliary inputs. The MIPS16e instruction set can shrink audio decoder firmware (MP3, AAC, SBC) by up to 40 percent, freeing the 64 KB Flash for richer feature sets. DMA-driven I2S transfers keep the CPU free for UI and Bluetooth stack processing. The -V automotive grade suits in-cabin entertainment modules with stricter thermal requirements.
تجویز کردہ
Graphical Control Panels with PMP
The Parallel Master Port (PMP) integrated in the PIC32MX130F064DT-V/PT enables direct connection to small graphical LCDs and OLED panels in industrial control panels and appliance user interfaces. PPS, dual SPI, and 4 DMA channels drive fast display refresh while leaving CPU cycles available for control loops. The 21 GPIO handle keypad, encoder, and indicator LED scanning. Automotive -V grade suits dashboard sub-displays and HVAC control panels in cabin environments.
تجویز کردہ
Capacitive Touch Interfaces (mTouch)
Microchip's mTouch firmware library runs natively on the PIC32MX130F064DT-V/PT's CTMU peripheral, supporting capacitive touch buttons, sliders, and wheels in appliance, industrial, and automotive HMI designs. The 1 ns high-resolution timer captures precise capacitance measurements for robust proximity detection in noisy environments. PPS flexibility routes the CTMU channels to any GPIO, simplifying PCB layout. AEC-Q100 qualification on the -V variant enables under-hood or cabin-proximity or backlit switch panels.
تجویز کردہ
Industrial Sensor Hubs and Data Loggers
The PIC32MX130F064DT-V/PT's dual UART, dual I2C, dual SPI, and 4 DMA channels let it aggregate data from multiple sensors - temperature, pressure, accelerometers - into a centralized hub or remote data logger. The on-chip temperature sensor enables self-monitoring without external parts. Sub-0.5 mA/MHz active current plus multiple low-power modes support battery-powered remote installations. AEC-Q100 grade handles harsh factory-floor and outdoor cabinet environments with extended temperature swings.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC32MX130F064DT-V/PT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC32MX130F064DT-I/PT | PIC32MX130F064DT-50I/PT | PIC32MX270F256DT-I/PT | PIC32MX150F128DT-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-44 (10x10 mm) | TQFP-44 (10x10 mm) - same | TQFP-44 (10x10 mm) - same | TQFP-44 (10x10 mm) - same | TQFP-44 (10x10 mm) - same |
| Maximum CPU Speed | 40 MHz | 40 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 256 KB | 128 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 64 KB | 32 KB |
| Temperature Grade | -40C to +105C (automotive -V) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| AEC-Q100 Qualified | Yes | No | No | No | No |
| USB Module | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG | Full-Speed USB 2.0 OTG |
| Approximate Unit Price (qty 100) | USD 3.68 | USD 3.40 | USD 3.85 | USD 5.40 | USD 4.20 |
اہم امتیازی خصوصیات
- AEC-Q100 automotive qualification at the same price tier (بمقابلہPIC32MX130F064DT-I/PT)
- Higher density Flash than competing 8-bit automotive MCUs (بمقابلہPIC16F1xx automotive family)
- Integrated full-speed USB without external transceiver (بمقابلہPIC24HJ64GPxxx family)
ڈیزائن نوٹس
The PIC32MX130F064DT-V/PT has separate analog (AVDD/AVSS) and digital (VDD/VSS) supply pins that must be decoupled independently. Place a 10 uF bulk tantalum or ceramic plus a 0.1 uF decoupling cap close to each VDD pin, and an additional 0.1 uF + 10 uF on AVDD when the ADC or CTMU is in use. Tie all VSS pins to a low-impedance ground plane. Source impedance below 50 milliohm from the regulator prevents MCU reset during USB inrush current. Estimated standby current at 3.3V in Sleep mode with RTCC running is typically under 20 uA per the family datasheet.
For USB applications, route the D+ and D- differential pair as a 90-ohm differential impedance matched-length trace (within 150 mil). Place the USB series termination resistors and ESD protection array (such as USBLC6-2) within 5 mm of the connector. The crystal traces from pins 28-32 must be short (under 5 mm) and surrounded by ground pour. Place the decoupling capacitors on the same layer as the MCU within 3 mm of the supply pins. The exposed pad (if any variant has one) must be soldered to a thermal pad on the PCB.
Do not assume the PIC32MX130F064DT-V/PT and PIC32MX130F064DT-I/PT are functionally identical in automotive environments - the -V grade is required for AEC-Q100 compliance even when both parts share the same die. Always configure unused I/O pins as outputs (not inputs) to avoid unnecessary interrupt wake-ups and current draw. Configuration bits must be set correctly: disable JTAG if not used (or enable it intentionally for debugging). The 64 KB Flash limit means large USB stacks plus bootloader require careful memory budgeting - leave at least 4 KB reserved for bootloader or fail-safe recovery.
The TQFP-44 package has a typical thermal resistance (theta_JA) of around 45-55 C/W on a 4-layer JEDEC test board. At 40 MHz with active current under 0.5 mA/MHz, the MCU dissipates approximately 66 mW at 3.3V - well within the package's thermal envelope. However, in automotive -V applications at +105C ambient, ensure the PCB copper area around the TQFP provides at least 100 sq mm of ground/power pour to keep junction temperature within AEC-Q100 limits.
تعمیل کی معلومات
AEC-Q100 automotive qualified. RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free per Microchip material declarations.