PIC32MX130F256D-V/TL - 40MHz 32-bit MCU 256KB Flash 44-VTLA | Microchip
MPN: PIC32MX130F256D-V/TL ✓ فعالPIC32MX130F256D-V/TL جائزہ
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals on one die. PIC32MX devices are positioned in Microchip's 32-bit MCU hierarchy: PIC32MX -> MIPS M4K core -> 32-bit microcontroller -> embedded processor -> semiconductor IC. Within the broader PIC32 family the PIC32MX1XX/2XX 28/36/44-pin sub-family targets cost-sensitive general-purpose designs, sitting below the higher-pin-count PIC32MX3/4/5/6/7 series and above the 16-bit PIC24/dsPIC families.
Key features include 256 KB Flash and 16 KB SRAM, 40 MHz core with 1.55 DMIPS/MHz efficiency, Peripheral Pin Select for flexible signal routing, two I2S/SPI modules targeting audio codecs, a 16-bit Parallel Master Port for graphics, 10-bit 1 Msps ADC with on-chip temperature diode, mTouch capacitive-touch support, RTCC, CTMU, USB 2.0 full-speed OTG, and 5 CCP/IC/OC/PWM timers. The MIPS M4K pipeline issues one instruction per cycle and integrates hardware multiply/divide, supporting C compiled code at usable clock rates without wait states from Flash. The 16-bit PMP can address external memories or drive parallel displays, while PPS remaps most digital peripherals to almost any I/O - eliminating the pin-fix limitations of older PIC designs.
Typical applications include automotive body and infotainment modules, industrial HMI panels, USBN-over-IP peripherals, mTouch user interfaces, audio playback and codec interfacing, and battery-powered sensing. The exposed pad aids thermal dissipation at 40 MHz; designers should solder the EP to a continuous ground plane for rated electrical and thermal performance.
When designing with this part, observe the 2.3 V-3.6 V supply range and provide adequate decoupling per the family datasheet. The V/TL suffix indicates the automotive (-V) temperature grade and tape-and-reel packaging.
کے لیے ڈراپ اِن متبادل PIC32MX130F256D-V/TL — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC32MX130F256D-V/TL (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC, Operating Temperature, Core Architecture, Timers.
PIC32MX130F256DT-V/TL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX130F256D-50I/TL
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX230F256D-V/TL
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC32MX130F064D-V/ML
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX130F256B-V/SS
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX130F256D-V/TL زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core | MIPS32 M4K 32-bit RISC |
| Maximum CPU Frequency | 40 MHz (83 DMIPS) |
| Program Memory (Flash) | 256 KB (256K x 8) |
| Data SRAM | 16 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| پیکیج | 44-VTLA (6x6 mm) with exposed pad |
| ماؤنٹنگ ٹائپ | Surface Mount |
| آپریٹنگ درجہ حرارت | -40C to +105C (automotive -V grade) |
| Active Current Consumption | 0.5 mA/MHz (typical) |
| Peripheral Pin Select (PPS) | Yes |
| I2S / SPI Modules | 2 |
| Parallel Master Port (PMP) | 16-bit, for graphics interfaces |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| ADC | 10-bit, 1 Msps, with on-chip temperature sensor |
| CTMU / mTouch | Yes - Capacitive touch buttons and sliders |
| Timers | 5 x 16-bit (Capture/Compare/PWM) |
| Connectivity | I2C, SPI, UART, IrDA, LINbus, PMP |
| Automotive Qualification | AEC-Q100 |
| RoHS اسٹیٹس | Compliant |
PIC32MX130F256D-V/TL پن کنفیگریشن
| پن 1 | RPB0 — Remappable I/O / AN0 / PGED1 |
| پن 2 | RPB1 — Remappable I/O / AN1 / PGEC1 |
| پن 3 | RPB2 — Remappable I/O / AN2 / CVREF- / VBUS |
| پن 4 | RPB3 — Remappable I/O / AN3 / CVREF+ |
| پن 5 | VSS — Ground |
| پن 6 | VDD |
عام استعمالات
PIC32MX130F256D-V/TL کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Electronics Modules, Industrial HMI with mTouch, USB Audio / Codec Peripheral, Battery-Powered IoT Sensor Node, Medical Patient Monitoring (Non-Critical), Smart Home / Consumer IoT Bridge.
Automotive Body Electronics Modules
The PIC32MX130F256D-V/TL suits BCM, lighting controllers, and door/window node modules because of its AEC-Q100 qualification (-40C to +105C), 256 KB Flash for CAN/LIN stacks plus bootloader overhead, and integrated CTMU/mTouch for capacitive switch panels. At 0.5 mA/MHz active current and 40 MHz, the part delivers 83 DMIPS - enough for low-rate signal processing while staying within automotive quiescent budgets. The 16 KB SRAM accommodates CANopen/LIN buffering plus diagnostic logs, while Peripheral Pin Select allows flexible PCB routing when pin assignments change during design iterations.
تجویز کردہ
Industrial HMI with mTouch
For human-machine interface panels with capacitive touch buttons/sliders, the PIC32MX130F256D-V/TL provides on-chip CTMU + mTouch hardware for up to ~32 touch channels without external ICs. The 16-bit Parallel Master Port (PMP) drives small monochrome or low-color LCDs directly, while 256 KB Flash holds full MPLAB Harmony v3 USB + GUI libraries. At 40 MHz the part refreshes 320x240 QVGA panels comfortably; PPS re-assigns touch channels to any spare pin when the PCB layout evolves late in development.
تجویز کردہ
USB Audio / Codec Peripheral
USB 2.0 Full-Speed OTG combined with two I2S/SPI modules makes PIC32MX130F256D-V/TL a good fit for USB audio DACs/ADCs, headsets, and conferencing speakerphones. The 256 KB Flash fits USB Audio Class 1.0/2.0 stacks plus DSP algorithms; 16 KB SRAM ping-pongs 16-bit/48 kHz stereo streams. The 40 MHz MIPS M4K core executes biquad filters with ample margin, while the 10-bit ADC supports sidetone and button-press sensing on the same chip.
تجویز کردہ
Battery-Powered IoT Sensor Node
With 0.5 mA/MHz active current plus low-power sleep modes, PIC32MX130F256D-V/TL powers battery-driven sensors, BLE bridges, and remote telemetry nodes from a Li-ion cell. The 10-bit ADC with on-chip temperature diode simplifies thermistor/battery monitoring without external sensors, and 256 KB Flash holds full wireless stacks. PPS re-routes peripheral pins when the schematic changes, while the compact 44-VTLA 6x6 mm package fits miniature enclosures.
تجویز کردہ
Medical Patient Monitoring (Non-Critical)
For non-life-critical patient monitors (fitness, wearables, telehealth peripherals), the PIC32MX130F256D-V/TL provides 40 MIPS for SpO2/ECG signal preprocessing, USB for PC data transfer, and mTouch for button/slider input. AEC-Q100 qualification, while automotive, also signals high reliability for medical-adjacent applications. The 16 KB SRAM buffers 1 kHz ECG samples without DMA starvation, while 256 KB Flash stores RTOS plus DSP routines.
تجویز کردہ
Smart Home / Consumer IoT Bridge
The PIC32MX130F256D-V/TL bridges ZigBee/Wi-Fi/Sub-GHz radios to USB or cloud uplinks in smart-home gateways, with USB OTG handling local PC sync. 256 KB Flash holds multi-protocol stacks (Zigbee 3.0, Matter, BLE), 16 KB SRAM manages mesh routing tables, and PMP/QSPI drive status LCDs. PPS allows re-tasking UART/SPI/I2C peripherals when reference designs evolve.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC32MX130F256D-V/TL — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC32MX130F256DT-V/TL | PIC32MX130F256D-50I/TL | PIC32MX230F256D-V/TL | PIC32MX130F064D-V/ML | PIC32MX130F256B-V/SS |
|---|---|---|---|---|---|---|
| Package | 44-VTLA (6x6 mm) | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same | 44-VTLA sibling - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit |
| Maximum CPU Frequency | 40 MHz (83 DMIPS) | 40 MHz (83 DMIPS) | 50 MHz | 50 MHz | 40 MHz (83 DMIPS) | 40 MHz (83 DMIPS) |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 64 KB (-75%) | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 8 KB (-50%) | 16 KB |
| Temperature Grade | -40C to +105C (AEC-Q100) | -40C to +105C (AEC-Q100) | -40C to +85C (industrial) | -40C to +105C (AEC-Q100) | -40C to +105C (AEC-Q100) | -40C to +105C (AEC-Q100) |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
اہم امتیازی خصوصیات
- AEC-Q100 automotive grade in compact 44-VTLA 6x6 mm (بمقابلہPIC32MX130F256D-I/PT (industrial grade, TQFP))
- Integrated mTouch CTMU on-chip - no external touch IC (بمقابلہPIC32MX230F256D-V/TL)
- 256 KB Flash + 16 KB SRAM for full USB + GUI stacks (بمقابلہPIC32MX130F064D-V/ML)
ڈیزائن نوٹس
Decouple each VDD/VSS pair with 0.1 uF ceramic placed within 3 mm of the pin, plus a single 10 uF bulk capacitor near the supply pin. Power the analog and digital VDD pins from the same 3.3 V LDO rail; the device does not require separate AVDD/AVSS. For USB applications provide 0.1 uF on VBUS plus a current-limiting series resistor per the family reference schematic. Estimated: total decoupling budget is 5x 0.1 uF + 1x 10 uF for a 44-VTLA part.
The 44-VTLA exposed pad is the primary heat-dissipation path. Solder the EP to a continuous ground copper pour of at least 25 mm^2 with thermal vias to an inner ground plane. Estimated: theta_JA drops from ~50 C/W (no EP solder) to ~25 C/W with proper EP soldering, allowing 40 MHz operation in -40C to +105C ambient. Always confirm EP solder joint integrity via X-ray or cross-section on first prototypes.
Route the 40 MHz clock traces first, keeping them short and adjacent to a ground pour. USB DP/DM traces must be 90-ohm differential, length-matched within 150 mil, and free of stubs. The 2-wire ICSP pins (PGECx/PGEDx) must be brought to a test header for in-circuit programming. Use Microchip's 'Pin Manager' plugin in MPLAB X to remap peripherals via PPS instead of rewiring the PCB.
Do NOT leave any VDD pin floating - each VDD/VSS pair must be powered and grounded even if internal logic is unused. Configuration bits must be set for proper clock source and watchdog state at programming time; otherwise the part may lock up. The -V suffix indicates automotive temperature grade - do not substitute -I industrial grade into AEC-Q100 production.
تعمیل کی معلومات
AEC-Q100 automotive grade per Microchip product page. RoHS and REACH compliant per DigiKey listing. Conflict minerals reporting compliant per Microchip corporate disclosures.
