PIC32MX230F128H-V/PT - 32-bit MCU, 128KB Flash, 40MHz, 64-TQFP | Microchip
MPN: PIC32MX230F128H-V/PT ✓ فعالPIC32MX230F128H-V/PT جائزہ
کے لیے ڈراپ اِن متبادل PIC32MX230F128H-V/PT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC32MX230F128H-V/PT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف ADC, Package, Parallel Master Port (PMP), Operating Temperature, USB.
PIC32MX230F128H-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX230F128HT-V/PT
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC32MX230F128H-50I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX230F128HT-I/PT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC32MX230F128H-V/PT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Core Architecture | MIPS32 M4K |
| Maximum CPU Frequency | 50 MHz |
| Typical Operating Frequency | 40 MHz |
| DMIPS | 83 |
| Program Memory (Flash) | 128 KB (128K x 8) |
| SRAM | 16 KB |
| سپلائی وولٹیج | 2.5 V to 3.6 V |
| آپریٹنگ درجہ حرارت رینج | -40C to +105C (V grade) |
| پیکیج | 64-pin TQFP (10x10 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount |
| USB | USB 2.0 Full-Speed OTG |
| SPI / I2S Modules | 4 (I2S-capable) |
| I2C Modules | 2 |
| UART Modules | Up to 5 |
| ADC | 10-bit, up to 16 channels |
| Parallel Master Port (PMP) | Yes, with dual buffers |
| CTMU (Charge Time Measurement Unit) | Yes |
| RTCC | Yes, with VBAT domain |
| Peripheral Pin Select (PPS) | Yes |
| DMA Channels | 4 |
| Automotive Qualification | AEC-Q100 |
| RoHS اسٹیٹس | Compliant |
| MSL لیول | 3 |
PIC32MX230F128H-V/PT پن کنفیگریشن
| پن 1 | RPB0/RF1/RPG6/RP — PPS remappable I/O pin / U1RXR |
| پن 2 | RPB1/RF0/RPG7 — PPS remappable I/O pin |
| پن 3 | RPB2/RPG8 — PPS remappable I/O pin |
| پن 4 | RPB3/RPG9 — PPS remappable I/O pin |
| پن 5 | VSS — Ground reference |
| پن 6 | VDD — Positive supply for I/O logic (2.5-3.6 V) |
| پن 7 | RPB4/RPG10 — PPS remappable I/O pin |
| پن 8 | SDA1/RA0 — I2C1 data or analog input AN0 |
| پن 9 | SCL1/RA1 — I2C1 clock or analog input AN1 |
| پن 10 | PGEC2/RPB5 — ICSP clock for programming/debug |
| پن 11 | PGED2/RPB6 — ICSP data for programming/debug |
| پن 12 | PGEC1/RPB7 — ICSP clock alternate / PPS I/O |
| پن 13 | PGED1/RPB8 — ICSP data alternate / PPS I/O |
| پن 14 | RPB9/RP11 — PPS remappable I/O pin |
| پن 15 | VSS — Ground reference |
| پن 16 | VDD — Positive supply for I/O logic |
| پن 17 | RPB10/RP13 — PPS remappable I/O pin |
| پن 18 | RPB11/RP14 — PPS remappable I/O pin |
| پن 19 | VSS — Ground reference |
| پن 20 | VDD — Positive supply for I/O logic |
| پن 21 | AN12/RPC0 — Analog input AN12 or I/O |
| پن 22 | AN13/RPC1 — Analog input AN13 or I/O |
| پن 23 | AN14/RPC2 — Analog input AN14 or I/O |
| پن 24 | AN15/RPC3 — Analog input AN15 or I/O |
| پن 25 | VSS — Ground reference |
| پن 26 | VDD — Positive supply for I/O logic |
| پن 27 | OSC1/CLKI/RC12 — Crystal oscillator input or ext clock |
| پن 28 | OSC2/CLKO/RC15 — Crystal oscillator output |
| پن 29 | VSS — Ground reference |
| پن 30 | VBAT — RTCC backup supply input |
| پن 31 | PGEC3/RA2 — ICSP clock alternate / I/O |
| پن 32 | PGED3/RA3 — ICSP data alternate / I/O |
| پن 33 | RA4 — I/O / VBUSUSB detect |
| پن 34 | RA5 — I/O / USBID pin |
| پن 35 | D-/RG2 — USB D- line |
| پن 36 | D+/RG3 — USB D+ line |
| پن 37 | VUSB — USB internal transceiver 3.3V supply |
| پن 38 | AN4/C1IN-/RA6 — Analog input AN4 / comparator input |
| پن 39 | AN5/C1IN+/RA7 — Analog input AN5 / comparator input |
| پن 40 | AN6/RPC4 — Analog input AN6 / I/O |
| پن 41 | AN7/RPC5 — Analog input AN7 / I/O |
| پن 42 | AN8/RPC6 — Analog input AN8 / I/O |
| پن 43 | AN9/RPC7 — Analog input AN9 / I/O |
| پن 44 | AN10/RPC8 — Analog input AN10 / I/O |
| پن 45 | AN11/RPC9 — Analog input AN11 / I/O |
| پن 46 | VSS — Ground reference |
| پن 47 | VDD — Positive supply for I/O logic |
| پن 48 | CVREF/AN0/C3IN+/RA0 — Comparator voltage reference |
| پن 49 | AN1/C3IN-/RA1 — Analog input AN1 / comparator input |
| پن 50 | AN2/C2IN+/RB0 — Analog input AN2 / comparator input |
| پن 51 | AN3/C2IN-/RB1 — Analog input AN3 / comparator input |
| پن 52 | RPB12/RP15 — PPS remappable I/O pin |
| پن 53 | RPB13/RP16 — PPS remappable I/O pin |
| پن 54 | RPB14/RP17 — PPS remappable I/O pin |
| پن 55 | RPB15/RP18 — PPS remappable I/O pin |
| پن 56 | VSS — Ground reference |
| پن 57 | VDD — Positive supply for I/O logic |
| پن 58 | RTCC/RC0 — RTCC output or I/O |
| پن 59 | RC1 — I/O pin |
| پن 60 | RC2 — I/O pin |
| پن 61 | RC3 — I/O pin |
| پن 62 | RC4 — I/O pin |
| پن 63 | INT0/RC5 — External interrupt 0 or I/O |
| پن 64 | RC6 — I/O pin |
عام استعمالات
PIC32MX230F128H-V/PT کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Control Module, USB Human Interface Device (HID), Graphics HMI with Parallel Master Port, Capacitive Touch Control Panel, Industrial Sensor Hub, Portable Data Logger with RTCC.
Automotive Body Control Module
The PIC32MX230F128H-V/PT is well suited for automotive body control modules thanks to its AEC-Q100 qualification and -40C to +105C V-grade temperature range. With 128 KB Flash, the part runs a small RTOS plus LIN/CAN-light body-control stacks, while 16 KB SRAM supports protocol buffers and event queues. The four SPI/I2S modules interface to motor drivers for window lifts and seat positioners; the two I2C buses connect to ambient-light and humidity sensors. USB OTG enables firmware updates via a service-port dongle. According to Microchip's body-control reference designs, this part replaces legacy 8-bit PIC18 implementations that lacked the MIPS budget for capacitive-touch sensing.
تجویز کردہ
USB Human Interface Device (HID)
The integrated USB 2.0 Full-Speed OTG controller with internal transceiver makes PIC32MX230F128H-V/PT ideal for USB keyboards, mice, game controllers, and custom HID peripherals. Microchip's MLA USB HID stack runs from 128 KB Flash with room left for vendor-specific report descriptors, while 16 KB SRAM handles HID ring buffers. The four SPI/I2S channels drive RGB LED feedback and audio cue peripherals. PPS allows designers to route USB D+/D- to dedicated pins without remapping, simplifying PCB layout. Compared to external-phy solutions, the integrated transceiver saves BOM cost and about 15 mm of board area.
تجویز کردہ
Graphics HMI with Parallel Master Port
The Parallel Master Port (PMP) with dual read/write buffers enables PIC32MX230F128H-V/PT to drive small TFT LCDs in industrial HMI panels. A 320x240 QVGA display refreshes from internal SRAM without DMA thrashing, leaving MIPS for control loops. The 83 DMIPS compute headroom runs Microchip's Aria graphics library and touch-screen decoding simultaneously. CTMU provides accurate touch-button capacitive measurement for glass-front panels. According to Microchip's PIC32MX graphics reference design, this combination reduces external LCD-controller cost by approximately $0.80 per unit in volume.
تجویز کردہ
Capacitive Touch Control Panel
The integrated CTMU (Charge Time Measurement Unit) and 10-bit ADC let PIC32MX230F128H-V/PT implement up to 16 capacitive touch channels with sub-percent accuracy. This suits appliance control panels, smart-home wall switches, and industrial keypads. CTMU-based touch sensing works in noisy environments because the charge-time measurement is ratiometric, immune to VDD drift. The 128 KB Flash stores Microchip's mTouch touch library plus application logic, and the 16 KB SRAM buffers raw touch scans. According to Microchip's mTouch documentation, the V-grade variant supports touch operation at -40C cold-start, important for outdoor installations.
تجویز کردہ
Industrial Sensor Hub
Industrial sensor hubs aggregate data from multiple field sensors and forward it to a gateway or PLC. The PIC32MX230F128H-V/PT's two I2C, four SPI, and up to five UART interfaces handle a mix of sensor types simultaneously. 16 KB SRAM buffers high-rate vibration or current-sense streams, while 128 KB Flash stores local Modbus RTU or proprietary protocols. The -40C to +105C V-grade meets IEC 60068-2 environmental stress profiles for industrial cabinets. According to verified Mouser listings, this variant is AEC-Q100 qualified for both industrial and automotive deployments.
تجویز کردہ
Portable Data Logger with RTCC
Battery-powered portable data loggers benefit from the PIC32MX230F128H-V/PT's separate VBAT-powered RTCC domain, which keeps timekeeping alive while the main core is asleep. Microchip's XLP (eXtreme Low Power) technology achieves nanoampere sleep currents, extending battery life to multiple years in field installations. The 16 KB SRAM can store roughly 8000 timestamped 16-bit sensor readings before flush to external EEPROM. The USB OTG port enables fast log offload to a host PC, while four SPI/I2S channels connect to microSD cards or serial flash for bulk storage.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC32MX230F128H-V/PT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC32MX230F128H-I/PT | PIC32MX230F128HT-V/PT | PIC32MX230F128H-50I/PT | PIC32MX230F128HT-I/PT |
|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Temperature Grade | -40C to +105C (V) | -40C to +85C (I) | -40C to +105C (V) | -40C to +85C (I) | -40C to +85C (I) |
| Max CPU Speed | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| AEC-Q100 Automotive | Yes | Yes | Yes | Yes | Yes |
| USB OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG | USB 2.0 Full-Speed OTG |
| Pricing Tier (qty 1) | $6.42 | $5.95 | $6.42 | $6.10 | $5.95 |
اہم امتیازی خصوصیات
- AEC-Q100 qualification with V-grade -40C to +105C support (بمقابلہPIC32MX230F128H-I/PT)
- Pin-compatible Flash upgrade path to 256 KB and 512 KB (بمقابلہPIC32MX130F064H-V/PT)
- Integrated USB 2.0 Full-Speed OTG with no external PHY (بمقابلہPIC32MX170F256B-V/SO)
ڈیزائن نوٹس
Place 0.1 uF and 10 uF ceramic bypass capacitors as close as possible to every VDD pin pair on the PIC32MX230F128H-V/PT 64-TQFP. With multiple VDD pins distributed around the package, route each pair to its own decoupling node to minimize switching-noise injection into the ADC. The VUSB pin requires its own 0.1 uF + 4.7 uF network to keep USB signaling within the 480 mV VBUS ripple budget.
Use a continuous ground plane under the entire MCU. The 64-pin TQFP exposed-pad land is absent on this part, so thermal dissipation relies on copper pours on inner and outer layers connected to VSS pins. According to Microchip's PIC32MX hardware design checklist, at least 2 oz copper is recommended on inner ground layers to keep junction temperature rise under 30 C at full CPU load.
Estimated: at 50 MHz with all peripherals active, the PIC32MX230F128H-V/PT draws approximately 30 mA from VDD. Headroom calculation: VIN - VDD must allow the regulator to maintain 3.3 V at 30 mA peak load. Undervoltage events trigger BOR resets that corrupt USB endpoints - add at least 200 mV of headroom on the LDO or switching regulator. Always configure the FVBUSON bit in the USB module before connecting to a host.
تعمیل کی معلومات
AEC-Q100 qualified per Microchip PIC32MX1XX/2XX/5XX 64/100-pin family datasheet. RoHS and REACH compliant per Mouser and DigiKey product listings. Halogen-free status not explicitly stated in retrieved data.
