SI3210-FTR - Programmable SLIC/CODEC | Silicon Labs
MPN: SI3210-FTR ✗ اختتامِ زندگیSI3210-FTR جائزہ
A SLIC, or Subscriber Line Interface Circuit, is the analog termination and control section between a telephone line and digital voice-processing electronics. A codec converts analog voice signals into digital PCM data, while battery generation supplies the DC feed voltage required by legacy analog telephones. The SI3210-FTR combines these functions into a complete ProSLIC interface, reducing the number of separate line-driver, codec, and support components required in a voice terminal.
The principal device characteristics include one-channel SLIC/codec integration, a selectable 3.3 V or 5 V operating supply, a 60 dB performance rating, and 41 mA current consumption. Its integrated battery-generation capability supports analog line powering, while the programmable CMOS architecture provides a configurable interface for voice-system designers. The 38-TSSOP package offers a compact surface-mount format for telecommunications, digital subscriber line, and voice-over-packet equipment.
The SI3210-FTR combines a low-voltage CMOS implementation with integrated analog telephone-interface functions. This integration can simplify board partitioning because the line interface, voice codec, and battery subsystem occupy one device rather than requiring separate implementations. Its operating supply options allow design teams to select the rail that best matches the surrounding digital logic and system power architecture.
Typical uses include analog telephone adapters, voice gateways, customer premises equipment, digital loop carrier terminals, and other systems that terminate an analog subscriber line while exchanging digital voice data internally. It is particularly relevant where one analog channel is sufficient and a programmable interface offers more flexibility than a fixed analog line circuit.
When designing around the SI3210-FTR, begin with the manufacturer pin-description and application circuits because line termination, digital interface, control, and battery-generation connections are tightly associated with the package layout. Preserve the recommended decoupling and external component arrangements, and validate acoustic performance, on-hook behavior, ring detection, and line power under the intended telephone-network conditions.
This page combines the exact package and operating characteristics, application guidance, replacement considerations, and PCB-focused design notes for engineers evaluating the SI3210-FTR. Use the manufacturer datasheet for final pin assignments, electrical limits, register configuration, and production design decisions.
کے لیے ڈراپ اِن متبادل SI3210-FTR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں SI3210-FTR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Device Type, Package.
SI3210-KT
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →SI3210-FTR تفصیلات
| Device Type | Programmable CMOS SLIC/codec with battery generation |
| SLIC Channels | 1 channel |
| سپلائی وولٹیج | 3.3 V or 5 V |
| Supply Voltage Maximum | 5.25 V |
| Supply Voltage Minimum | 3.13 V |
| Current Consumption | 41 mA |
| Signal Performance | 60 dB |
| پیکیج | 38-pin TSSOP |
| ماؤنٹنگ ٹائپ | Surface mount |
| Integrated Functions | SLIC, codec, and battery generation |
| Process Technology | Low-voltage CMOS |
SI3210-FTR 38-pin tssop پن کنفیگریشن گائیڈ
SI3210-FTR (38-pin tssop پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SI3210-FTR.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SI3210-FTR کے لیے موزوں ہے 6 ایپلیکیشنs: Analog Voice Gateway, Customer Premises Equipment, Digital Loop Carrier Terminal, Analog Telephone Adapter, VoIP Media Endpoint, Industrial Voice Terminal.
Analog Voice Gateway
The SI3210-FTR fits the one-channel analog termination stage of a voice gateway because it combines the subscriber line interface, codec, and battery-generation functions in one 38-pin TSSOP device. Its 3.3 V or 5 V operating capability allows the analog line section to coexist with either 3.3 V or 5 V system logic. The listed 41 mA operating current should be included in the gateway power budget, while the 60 dB performance rating provides a defined signal-performance target. Integration reduces the number of separate line-interface and codec assemblies, although the line network, protection network, external passive components, and control firmware must still be designed and validated for the intended telephone service.
تجویز کردہ
Customer Premises Equipment
For customer premises equipment, the SI3210-FTR provides a compact one-channel analog telephone interface in a 38-pin TSSOP package. Its integrated battery generation supports the DC feed expected by analog handsets, while the codec handles analog voice conversion and the SLIC controls subscriber-line signaling. The device can operate from a 3.3 V or 5 V rail, giving designers flexibility when coordinating the line interface with digital switching, media processing, or embedded control electronics. Because only one channel is listed, multi-line equipment will require additional line-interface channels or another architecture. Production qualification should include on-hook, off-hook, ring voltage, line current, and voice-quality tests under the target network conditions.
تجویز کردہ
Digital Loop Carrier Terminal
The SI3210-FTR is applicable to a digital loop carrier terminal that must bridge one analog subscriber line and digital transport equipment. Its SLIC, codec, and battery-generation blocks consolidate three telephone-interface functions into a single 38-TSSOP device, helping constrain board area on compact line cards. Operating from 3.3 V or 5 V provides compatibility with common telecom logic levels, and the stated 60 dB signal performance can be used as an initial channel-performance reference. Designers must still verify line termination, codec clocking, control signaling, and battery behavior against the terminal specifications. The 41 mA device current must also be coordinated with the line-card power-conversion design to prevent thermal or transient loading problems.
تجویز کردہ
Analog Telephone Adapter
The SI3210-FTR is well matched to a one-port analog telephone adapter that converts a subscriber line into a digital voice stream. It supplies the SLIC termination, analog voice codec, and battery generation normally distributed across several telephone-interface blocks, while the one-channel configuration aligns with a single-line terminal. The device's selectable 3.3 V or 5 V supply operation simplifies coordination with digital voice-processing electronics, and the 38-pin TSSOP package supports automated surface-mount assembly. Designers should use the manufacturer application circuit to select the external line-network components and protection scheme, then validate ringing, hook state, speech-path performance, and off-hook load current in the finished adapter.
تجویز کردہ
VoIP Media Endpoint
The SI3210-FTR can serve as the analog-side interface of a Voice over Internet Protocol endpoint when an existing telephone line must coexist with packetized voice processing. The codec converts analog speech to digital data, while the SLIC manages subscriber-line behavior and battery generation supplies line feed power. Its 3.3 V or 5 V operation allows flexible partitioning between line-side and packet-processing circuitry, and the integrated functions can reduce external component count. The listed 41 mA operating current should be included in the endpoint regulator and thermal budget. Product-level testing remains necessary because echo cancellation, packet jitter, line impedance, and codec timing can affect the perceived quality even when the SI3210-FTR's own 60 dB signal specification is satisfied.
تجویز کردہ
Industrial Voice Terminal
The SI3210-FTR supports industrial voice terminals that require an analog subscriber-line connection, such as remote monitoring stations, intercom gateways, or legacy communications equipment. The integrated SLIC, codec, and battery generation provide the essential telephone-line functions in a single 38-pin TSSOP package. A 3.3 V or 5 V operating rail allows the terminal electronics to use the power architecture already deployed around its controller, while the stated 41 mA current provides a starting point for regulator sizing. Industrial systems may impose extended-temperature, surge, and continuous-call requirements, so those conditions must be checked against the exact device ratings and qualification records. External protection and filtering should be selected for the installation environment rather than copied without review.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SI3210-FTR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | SI3210-KT |
|---|---|---|
| Package | 38-pin TSSOP | 38-pin TSSOP |
| Brand | Silicon Laboratories | Skyworks Solutions |
| Product Family | ProSLIC | SI3210 series |
| Supply Voltage Maximum | 5.25 V | 5.25 V |
| Supply Voltage Minimum | 3.13 V | 3.13 V |
اہم امتیازی خصوصیات
- Complete one-channel telephone interface integration (بمقابلہSI3210-KT)
- Defined operating-performance figure (بمقابلہSI3210-KT)
- Dual nominal supply selection (بمقابلہSI3210-KT)
ڈیزائن نوٹس
Design the supply network around the listed 41 mA operating current and the device's selectable 3.3 V or 5 V rail. Use the manufacturer power-pin identification and recommended bypass capacitors because incorrect placement can increase supply ripple or disturb the voice and battery functions. Check startup sequencing, regulator headroom, and the interaction between normal load current and battery-generation demand before releasing the PCB layout.
Place the device and its decoupling capacitors close to their associated supply and ground pins. Keep sensitive analog and battery-generation traces away from digital clock and control routing where practical. Because the SI3210-FTR integrates a line-facing analog interface with digital control in one 38-pin TSSOP package, careful partitioning can reduce coupling between switching activity, line transients, and the codec signal path.
Do not treat the shared 38-pin TSSOP format and 3.13 V to 5.25 V supply range of SI3210-KT as proof of automatic interchangeability. Compare every pin name and function, control protocol, register behavior, and external component requirement with the manufacturer documentation. A board-level substitution also requires ringing, hook-state, battery-voltage, and voice-path testing before production approval.
External line-network, protection, filtering, and battery-related components are central to a production subscriber-line interface. Do not substitute generic values without reviewing the manufacturer application circuit and the target telephone-network requirements. Validate ring cadence and voltage, off-hook impedance, on-hook leakage, speech-path performance, and behavior during line transients or power interruptions.
تعمیل کی معلومات
The indexed product information does not provide an exact ordering-code-specific material-compliance declaration. Confirm RoHS, REACH, lead-free, and halogen-free status with the manufacturer before production release.