Silicon Laboratories

SI3210-FTR - Programmable SLIC/CODEC | Silicon Labs

MPN: SI3210-FTR ✗ Cuối đời
3.3 V or 5 V Vdss 41 mA Id 38-pin TSSOP Package
MOQ: 1 |

SI3210-FTR Tóm tắt

Silicon Laboratories SI3210-FTR is a programmable CMOS ProSLIC subscriber-line interface IC that integrates SLIC, codec, and battery-generation functions into one analog telephone-line interface. The device supports a 3.3 V or 5 V supply, operates as a one-channel solution, provides 60 dB signal performance, and consumes 41 mA. It is packaged in a 38-pin TSSOP for surface-mounted telecom and voice-access equipment.

A SLIC, or Subscriber Line Interface Circuit, is the analog termination and control section between a telephone line and digital voice-processing electronics. A codec converts analog voice signals into digital PCM data, while battery generation supplies the DC feed voltage required by legacy analog telephones. The SI3210-FTR combines these functions into a complete ProSLIC interface, reducing the number of separate line-driver, codec, and support components required in a voice terminal.

The principal device characteristics include one-channel SLIC/codec integration, a selectable 3.3 V or 5 V operating supply, a 60 dB performance rating, and 41 mA current consumption. Its integrated battery-generation capability supports analog line powering, while the programmable CMOS architecture provides a configurable interface for voice-system designers. The 38-TSSOP package offers a compact surface-mount format for telecommunications, digital subscriber line, and voice-over-packet equipment.

The SI3210-FTR combines a low-voltage CMOS implementation with integrated analog telephone-interface functions. This integration can simplify board partitioning because the line interface, voice codec, and battery subsystem occupy one device rather than requiring separate implementations. Its operating supply options allow design teams to select the rail that best matches the surrounding digital logic and system power architecture.

Typical uses include analog telephone adapters, voice gateways, customer premises equipment, digital loop carrier terminals, and other systems that terminate an analog subscriber line while exchanging digital voice data internally. It is particularly relevant where one analog channel is sufficient and a programmable interface offers more flexibility than a fixed analog line circuit.

When designing around the SI3210-FTR, begin with the manufacturer pin-description and application circuits because line termination, digital interface, control, and battery-generation connections are tightly associated with the package layout. Preserve the recommended decoupling and external component arrangements, and validate acoustic performance, on-hook behavior, ring detection, and line power under the intended telephone-network conditions.

This page combines the exact package and operating characteristics, application guidance, replacement considerations, and PCB-focused design notes for engineers evaluating the SI3210-FTR. Use the manufacturer datasheet for final pin assignments, electrical limits, register configuration, and production design decisions.

Bộ thay thế dễ dàng lắp đặt cho SI3210-FTR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SI3210-FTR (cùng hình factor và footprint) — khác nhau ở Device Type, Package.

Silicon Labs
Device Type: Programmable CMOS SLIC/CODEC
Package: 38-TSSOP
So sánh với SI3210-FTR →

SI3210-KT

✅ Drop-In
Silicon Labs
📦 38-pin TSSOP
Programmable CMOS SLIC/CODEC · Telecom Interface IC · Subscriber Line Interface Concept (SLIC), CODEC · Single channel · 3.13 V · 5.25 V · 38-TSSOP · Surface-mount TSSOP

Liên hệ để biết giá

Xem tài liệu →

SI3210-FTR Thông số kỹ thuật

Device Type Programmable CMOS SLIC/codec with battery generation
SLIC Channels 1 channel
Điện áp cung cấp 3.3 V or 5 V
Supply Voltage Maximum 5.25 V
Supply Voltage Minimum 3.13 V
Current Consumption 41 mA
Signal Performance 60 dB
Hộp 38-pin TSSOP
Kiểu lắp đặt Surface mount
Integrated Functions SLIC, codec, and battery generation
Process Technology Low-voltage CMOS

Hướng dẫn cấu hình chân SI3210-FTR 38-pin tssop

Cấu hình chân cho SI3210-FTR (38-pin tssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 38-pin tssop cho SI3210-FTR

Không có dữ liệu chân cụ thể sẵn có cho SI3210-FTR.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

SI3210-FTR phù hợp cho 6 Áp dụngs: Analog Voice Gateway, Customer Premises Equipment, Digital Loop Carrier Terminal, Analog Telephone Adapter, VoIP Media Endpoint, Industrial Voice Terminal.

🌐

Analog Voice Gateway

The SI3210-FTR fits the one-channel analog termination stage of a voice gateway because it combines the subscriber line interface, codec, and battery-generation functions in one 38-pin TSSOP device. Its 3.3 V or 5 V operating capability allows the analog line section to coexist with either 3.3 V or 5 V system logic. The listed 41 mA operating current should be included in the gateway power budget, while the 60 dB performance rating provides a defined signal-performance target. Integration reduces the number of separate line-interface and codec assemblies, although the line network, protection network, external passive components, and control firmware must still be designed and validated for the intended telephone service.

📱

Customer Premises Equipment

For customer premises equipment, the SI3210-FTR provides a compact one-channel analog telephone interface in a 38-pin TSSOP package. Its integrated battery generation supports the DC feed expected by analog handsets, while the codec handles analog voice conversion and the SLIC controls subscriber-line signaling. The device can operate from a 3.3 V or 5 V rail, giving designers flexibility when coordinating the line interface with digital switching, media processing, or embedded control electronics. Because only one channel is listed, multi-line equipment will require additional line-interface channels or another architecture. Production qualification should include on-hook, off-hook, ring voltage, line current, and voice-quality tests under the target network conditions.

🖥️

Digital Loop Carrier Terminal

The SI3210-FTR is applicable to a digital loop carrier terminal that must bridge one analog subscriber line and digital transport equipment. Its SLIC, codec, and battery-generation blocks consolidate three telephone-interface functions into a single 38-TSSOP device, helping constrain board area on compact line cards. Operating from 3.3 V or 5 V provides compatibility with common telecom logic levels, and the stated 60 dB signal performance can be used as an initial channel-performance reference. Designers must still verify line termination, codec clocking, control signaling, and battery behavior against the terminal specifications. The 41 mA device current must also be coordinated with the line-card power-conversion design to prevent thermal or transient loading problems.

☎️

Analog Telephone Adapter

The SI3210-FTR is well matched to a one-port analog telephone adapter that converts a subscriber line into a digital voice stream. It supplies the SLIC termination, analog voice codec, and battery generation normally distributed across several telephone-interface blocks, while the one-channel configuration aligns with a single-line terminal. The device's selectable 3.3 V or 5 V supply operation simplifies coordination with digital voice-processing electronics, and the 38-pin TSSOP package supports automated surface-mount assembly. Designers should use the manufacturer application circuit to select the external line-network components and protection scheme, then validate ringing, hook state, speech-path performance, and off-hook load current in the finished adapter.

🎧

VoIP Media Endpoint

The SI3210-FTR can serve as the analog-side interface of a Voice over Internet Protocol endpoint when an existing telephone line must coexist with packetized voice processing. The codec converts analog speech to digital data, while the SLIC manages subscriber-line behavior and battery generation supplies line feed power. Its 3.3 V or 5 V operation allows flexible partitioning between line-side and packet-processing circuitry, and the integrated functions can reduce external component count. The listed 41 mA operating current should be included in the endpoint regulator and thermal budget. Product-level testing remains necessary because echo cancellation, packet jitter, line impedance, and codec timing can affect the perceived quality even when the SI3210-FTR's own 60 dB signal specification is satisfied.

🏭

Industrial Voice Terminal

The SI3210-FTR supports industrial voice terminals that require an analog subscriber-line connection, such as remote monitoring stations, intercom gateways, or legacy communications equipment. The integrated SLIC, codec, and battery generation provide the essential telephone-line functions in a single 38-pin TSSOP package. A 3.3 V or 5 V operating rail allows the terminal electronics to use the power architecture already deployed around its controller, while the stated 41 mA current provides a starting point for regulator sizing. Industrial systems may impose extended-temperature, surge, and continuous-call requirements, so those conditions must be checked against the exact device ratings and qualification records. External protection and filtering should be selected for the installation environment rather than copied without review.

What is the SI3210-FTR?
The SI3210-FTR is a one-channel, low-voltage CMOS ProSLIC that integrates a subscriber line interface circuit, voice codec, and battery-generation circuitry. According to the Silicon Laboratories datasheet description, it forms a complete analog telephone interface in a 38-pin TSSOP package, allowing one device to handle line termination, voice conversion, and line-powering functions.
What voltage does the SI3210-FTR operate at?
The SI3210-FTR operates from a 3.3 V or 5 V supply. The device comparison information identifies a 3.13 V minimum and 5.25 V maximum supply range, while the product listing summarizes the supported rails as 3.3 V and 5 V. Confirm the exact rail, absolute maximum ratings, and decoupling values in the manufacturer datasheet before finalizing the power supply.
How many channels and pins does the SI3210-FTR have?
The SI3210-FTR provides one SLIC channel in a 38-pin TSSOP package. DigiKey identifies it as a 38-TSSOP telecom subscriber-line interface codec, while the product listing describes a one-channel device. The 38-pin count includes the digital interface, analog line circuitry, control connections, supply pins, ground pins, and battery-generation functions.
Where can I download the SI3210-FTR datasheet PDF?
The SI3210-FTR datasheet is accessible through the Silicon Laboratories document listing at Datasheets.com and the indexed PDF page at Alldatasheet. These links provide the manufacturer datasheet and its technical specifications. Use the manufacturer document for authoritative pin descriptions, electrical characteristics, application circuits, register information, and revision-controlled production guidance.
Where can I find the SI3210-FTR pinout?
The SI3210-FTR pinout is contained in the manufacturer datasheet rather than on a separate public pinout page identified for this product. The device uses a 38-pin TSSOP, so use the pin-description table and package drawing in the datasheet to map supply, ground, PCM or digital interface, control, analog line, and battery-generation connections to the physical package.
What can replace the SI3210-FTR?
SI3210-KT is the closest same-family candidate identified by the component comparison data because it shares the SI3210 series, 38-pin TSSOP format, and 3.13 V to 5.25 V supply range. Treat it as a candidate rather than an unconditional substitution: confirm every pin, control interface, register behavior, acoustic performance, and line-power characteristic against the manufacturer documentation before production use.
What is the best Skyworks equivalent for the SI3210-FTR?
No distinct Skyworks cross-brand equivalent is established by the available component comparison data. The SI3210-KT comparison lists Skyworks Solutions as the manufacturer associated with that related SI3210-series device, but package similarity alone does not prove pin-for-pin behavior. Request a formal substitution assessment and compare pin assignments, firmware requirements, and telephone-network performance before selecting it.
SI3210-FTR vs SI3210-KT: which is better?
The SI3210-FTR is preferable when the design is tied specifically to the FTR ordering configuration and its documented behavior. The SI3210-KT is a closely related 38-pin TSSOP SI3210-series option with the same stated 3.13 V to 5.25 V supply range, but the available comparison does not establish complete pin compatibility. A circuit-level review is mandatory before interchanging them.
When should I choose SI3210-FTR over SI3210-KT?
Choose the SI3210-FTR when the existing schematic, bill of materials, qualification record, or firmware configuration explicitly names that ordering code. Consider SI3210-KT only after checking its complete pin description and operating behavior against the SI3210-FTR. Matching the TSSOP package and supply limits is useful initial screening, but it is not sufficient evidence of drop-in interchangeability.
Is the SI3210-FTR suitable for a voice gateway?
The SI3210-FTR is suitable for a one-channel analog-line section of a voice gateway because it integrates the SLIC, codec, and battery-generation functions needed for a subscriber-line interface. Its 3.3 V or 5 V operation and 38-pin TSSOP package support compact embedded designs. Confirm interface timing, control firmware, line parameters, and regulatory performance for the target deployment.
How much current does the SI3210-FTR consume?
The SI3210-FTR is listed at 41 mA. This figure describes the device's stated operating current and should be included in supply-budget calculations for the SLIC, codec, and battery-generation functions. Account for local bypass-capacitor charging, adjacent interface loads, regulator tolerances, and line-dependent battery behavior in the final power design.
What does the SI3210-FTR integrate for analog telephones?
The SI3210-FTR integrates a subscriber line interface circuit, an analog voice codec, and battery-voltage generation into one CMOS device. According to the Silicon Laboratories datasheet description, this combination creates a complete analog telephone interface. The integration can reduce external circuitry while retaining programmable control of line and voice functions.
Can the SI3210-FTR support a digital subscriber line terminal?
The SI3210-FTR can support one analog subscriber-line channel in a digital loop carrier or terminal design. Its one-channel SLIC/codec integration, battery generation, and 3.3 V or 5 V supply capability fit equipment that connects analog lines to digital voice systems. The exact DSL, transport, and line-rate requirements must be checked against the application architecture.
Is the SI3210-FTR RoHS compliant?
The RoHS status of the SI3210-FTR should be confirmed from the manufacturer product record or declaration for the exact ordering code. The indexed product information identifies the part, package, supply options, channel count, and current consumption but does not provide a definitive material-compliance statement. Apply the current manufacturer declaration to production documentation and supplier requirements.
Where to buy SI3210-FTR online and what is its lead time?
Use the Request a Quote form on this page to ask for SI3210-FTR availability, order quantity, condition, lead time, and a current quotation. Since this component is a legacy line-interface device, supply may be limited or dependent on remaining factory inventory rather than a regular active-production schedule. Confirm the exact 38-pin TSSOP ordering code before authorizing an order.

Dữ liệu tham khảo kỹ thuật cho SI3210-FTR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the SI3210-FTR when the design requires the documented one-channel ProSLIC function and the exact FTR ordering code appears in the schematic, bill of materials, or qualification record. Its integrated SLIC, codec, and battery-generation functions make it suitable for a single analog subscriber line, and the selectable 3.3 V or 5 V rail supports common telecom and embedded logic arrangements. Consider SI3210-KT only when procurement constraints justify reviewing it as a substitute: it has the same 38-pin TSSOP format and 3.13 V to 5.25 V supply range, but complete pin, register, and functional equivalence is not established by the published comparison. Do not make a new production selection based only on package similarity. For either device, verify the manufacturer electrical limits, temperature range, external line-network values, control requirements, and lifecycle status. If no qualified source can confirm the legacy part and its documentation, consider redesigning around a currently supported voice-interface architecture rather than accepting an unqualified substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này SI3210-KT
Package 38-pin TSSOP 38-pin TSSOP
Brand Silicon Laboratories Skyworks Solutions
Product Family ProSLIC SI3210 series
Supply Voltage Maximum 5.25 V 5.25 V
Supply Voltage Minimum 3.13 V 3.13 V

Bảo phân biệt quan trọng

  • Complete one-channel telephone interface integration (vsSI3210-KT)
  • Defined operating-performance figure (vsSI3210-KT)
  • Dual nominal supply selection (vsSI3210-KT)

Ghi chú thiết kế

Design the supply network around the listed 41 mA operating current and the device's selectable 3.3 V or 5 V rail. Use the manufacturer power-pin identification and recommended bypass capacitors because incorrect placement can increase supply ripple or disturb the voice and battery functions. Check startup sequencing, regulator headroom, and the interaction between normal load current and battery-generation demand before releasing the PCB layout.

Place the device and its decoupling capacitors close to their associated supply and ground pins. Keep sensitive analog and battery-generation traces away from digital clock and control routing where practical. Because the SI3210-FTR integrates a line-facing analog interface with digital control in one 38-pin TSSOP package, careful partitioning can reduce coupling between switching activity, line transients, and the codec signal path.

Do not treat the shared 38-pin TSSOP format and 3.13 V to 5.25 V supply range of SI3210-KT as proof of automatic interchangeability. Compare every pin name and function, control protocol, register behavior, and external component requirement with the manufacturer documentation. A board-level substitution also requires ringing, hook-state, battery-voltage, and voice-path testing before production approval.

External line-network, protection, filtering, and battery-related components are central to a production subscriber-line interface. Do not substitute generic values without reviewing the manufacturer application circuit and the target telephone-network requirements. Validate ring cadence and voltage, off-hook impedance, on-hook leakage, speech-path performance, and behavior during line transients or power interruptions.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The indexed product information does not provide an exact ordering-code-specific material-compliance declaration. Confirm RoHS, REACH, lead-free, and halogen-free status with the manufacturer before production release.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

si3210 datasheet silabs si3210 SI3210-FTR datasheet SI3210-FTR datasheet pdf SI3210-FTR pinout SI3210-FTR specifications SI3210-FTR equivalent SI3210-FTR replacement SI3210-FTR vs SI3210-KT SI3210-FTR price SI3210-FTR stock SI3210-FTR 38-TSSOP SI3210-FTR application circuit

Các bộ phận và thuật ngữ liên quan

Silicon Laboratories SI3210-FTR SI3210-KT Skyworks Solutions ProSLIC subscriber line interface circuit SLIC voice codec battery generation low-voltage CMOS telephone line interface 38-pin TSSOP TSSOP family surface-mount technology one-channel interface 3.3 V supply 5 V supply analog telephone voice gateway digital loop carrier customer premises equipment line protection 60 dB signal performance 41 mA operating current
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ