Texas Instruments

SN74LS243N - Quad 4-Bit Bus Transceiver | Texas Instruments

MPN: SN74LS243N ✓ فعال
4.75 V to 5.25 V Vdss 133 ohm Rds(on) 14-pin PDIP Package
MOQ: 1 |

SN74LS243N جائزہ

Texas Instruments SN74LS243N is a quad 4-bit-per-element, non-inverting bus transceiver designed for asynchronous two-way communication between data buses. The device operates from a nominal 5 V supply and is offered in a 14-pin PDIP package. Each transceiver element supports four data lines, enabling one package to connect two buses through four independently controlled data paths.

A bus transceiver is a digital interface component that places a driver on one side of a bus and a receiver on the other. This arrangement allows two independently operating bus systems to share a physical connection and transfer data in either direction. In the broader integrated-circuit hierarchy, the SN74LS243N belongs to the 74LS TTL logic family and provides the physical-layer interface between a bus driver or peripheral and a processor data bus.

The principal functional attributes include a non-inverting signal path, four parallel data lines per transceiver element, push-pull output capability, and support for terminated lines down to 133 ohms. Its 14-pin PDIP package provides through-hole mounting for industrial, control, instrumentation, and legacy computer-interface designs. The manufacturer describes the SN74LS243 commercial-temperature family variant for operation from 0°C to 70°C.

The SN74LS243N is useful when two bus sections need bidirectional communication but are not always driven by the same controller. The transceiver separates the transmit and receive functions while presenting compatible logic signaling to both sides. This architecture reduces the number of discrete buffers required in multi-master or bus-isolation arrangements and simplifies routing compared with separate one-way buffers.

Typical uses include asynchronous data exchange, test equipment interfaces, peripheral connections, control-panel communication, and industrial systems that retain 74LS logic interfaces. The 133-ohm terminated-line capability makes the device relevant to legacy backplane and cable-oriented bus designs where controlled impedance and reliable signal return are important.

PCB implementation should preserve a continuous ground reference and place bypass capacitance close to the supply pins. Because the SN74LS243N is a through-hole 14-pin PDIP device, its pin spacing and drilled footprint must match the selected package drawing. Designers should also check bus direction-control sequencing and signal termination in the complete circuit.

This product page combines the manufacturer function description, package and ordering information, supported operating characteristics, cross-reference results, practical bus-interface guidance, and engineering selection criteria. Those details help distinguish a genuine 74LS bus-transceiver assembly from CMOS-interface devices that may share a similar footprint but require different logic-level and timing validation.

کے لیے ڈراپ اِن متبادل SN74LS243N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

SN74LS243NE4

✅ ڈراپ-اِن
📦 14-pin PDIP
Same 4.75 V to 5.25 V supply, quad 4-bit non-inverting function, and 14-pin PDIP footprint; ordering suffix differs with 0% change in the listed principal parameters.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

SN74LS243N3

✅ ڈراپ-اِن
📦 14-pin PDIP
Same 4.75 V to 5.25 V supply, quad 4-bit non-inverting function, and 14-pin PDIP footprint; ordering suffix differs with 0% change in the listed principal parameters.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

SN74LS243N زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Quad 4-bit bus transceiver
Number of Elements 4 elements
Data Lines per Element 4 bits per element
Signal Polarity Non-inverting
آؤٹ پٹ کی قسم Push-pull
Communication Mode Asynchronous two-way
Minimum Terminated Line Resistance 133 ohm
Supply Voltage Range 4.75 V to 5.25 V
Commercial Operating Temperature Range 0°C to 70°C
Military Operating Temperature Range -55°C to 125°C for SN54LS243
پیکیج 14-pin PDIP
Package Pin Count 14 pins
ماؤنٹنگ ٹائپ Through-hole
Logic Family 74LS TTL
Manufacturer Product Page https://www.ti.com/product/SN74LS243

SN74LS243N 14 pins پن کنفیگریشن گائیڈ

SN74LS243N (14 pins پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

SN74LS243N کے لیے 14 pins پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SN74LS243N.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

SN74LS243N کے لیے موزوں ہے 6 ایپلیکیشنs: Asynchronous Two-Way Bus Interface, Industrial Controller Bus Isolation, Test and Measurement Equipment, Legacy Peripheral Data Exchange, Control Panel Communication, Legacy Backplane Data Routing.

🌐

Asynchronous Two-Way Bus Interface

The SN74LS243N is suited to linking two asynchronous bus sections that require separate transmit and receive paths. Its four elements each carry four data lines, allowing four parallel bits to cross between the two sides of the interface in a 5 V 74LS system. The non-inverting push-pull architecture preserves signal polarity and supports deterministic bus signaling. When implementing the interface, use the manufacturer pin configuration and establish correct direction-control sequencing for every connected driver so that multiple outputs never contend on the same line.

🏭

Industrial Controller Bus Isolation

The SN74LS243N can isolate the physical receive and drive functions of a legacy 74LS controller bus from another subsystem. Its four 4-bit groups are useful where several low- and medium-speed control lines must cross a bus boundary without tying the two controllers together. The 5 V operating range and 0°C to 70°C commercial specification suit controlled industrial equipment. The design should include a continuous ground reference, local supply bypassing, and deliberate bus termination; the device’s ability to drive lines down to 133 ohms supports legacy terminated-bus arrangements.

🔧

Test and Measurement Equipment

A quadruple bus transceiver is useful in test equipment that must route control or measurement data between an instrument and an external fixture. The SN74LS243N provides four parallel, non-inverting data paths per element while maintaining 74LS-compatible system signaling. This allows transmitter and receiver circuitry to be placed on opposite sides of a cable or board interface without merging their drive outputs directly. For reliable operation, keep the interconnect short, control reflection with the appropriate termination, and account for the bandwidth and timing margins of the 74LS implementation.

🖥️

Legacy Peripheral Data Exchange

The SN74LS243N supports older processor and peripheral systems that exchange four-bit data groups using 5 V 74LS signaling. Its four transceiver elements can connect host-side and peripheral-side buses while keeping the two interface directions electrically organized. This is particularly useful when upgrading a mixed-vintage installation without changing the established 14-pin through-hole logic footprint. Firmware designers should define bus ownership before enabling either direction, and hardware designers should preserve adequate settling time for the slower LS-series transition behavior.

🎛️

Control Panel Communication

The SN74LS243N can form part of a control-panel communication path where an operator interface or remote controller exchanges four parallel data bits with a central control system. The non-inverting signal path simplifies compatibility with existing 74LS logic, while the push-pull outputs support driven bus lines rather than passive open-collector signaling. In a panel design, keep the transceiver close to the connector and protection circuitry, provide a low-impedance ground return, and isolate the interface from motor switching or relay transients to avoid disturbing the 5 V logic rail.

🔌

Legacy Backplane Data Routing

The SN74LS243N is applicable to legacy backplanes that use four-bit parallel data paths and require bidirectional communication between bus segments. Its manufacturer-described ability to drive terminated lines down to 133 ohms is relevant when card-edge cables, short backplane traces, or controlled-impedance interconnects are used. The device should be placed where driver and receiver loading can be evaluated separately. Designers must also avoid excessive capacitive loading, maintain return paths, and validate timing at the slowest supported bus rate rather than relying only on rise-time estimates.

What is the SN74LS243N?
The SN74LS243N is a Texas Instruments quad 4-bit bus transceiver designed for asynchronous two-way communication between data buses. According to the TI product page, it provides four data lines per element, uses a non-inverting push-pull output, and is packaged in a 14-pin PDIP. Its principal application is connecting two bus systems while separating transmit and receive signal paths.
What is the operating voltage of SN74LS243N?
The SN74LS243N operates from 4.75 V to 5.25 V, corresponding to the standard 5 V 74LS logic range. The manufacturer identifies the SN74LS243 as a 5 V quad bus transceiver, while the SN54LS243 version is the military-temperature counterpart. Use a supply within the stated range and include suitable local bypass capacitance to minimize supply noise.
Where can I download the SN74LS243N datasheet PDF?
The official Texas Instruments datasheet is available from the SN74LS243 product page at https://www.ti.com/product/SN74LS243 and through the linked document at https://www.ti.com/lit/gpn/sn74ls243. The manufacturer document contains the device description, electrical characteristics, operating conditions, and package information. The SN74LS243N is the 14-pin PDIP ordering option.
Where can I find the SN74LS243N pinout?
The SN74LS243N pinout is published in the pin-configuration diagram in the TI SN74LS243 datasheet. Use the diagram associated with the 14-pin PDIP rather than a diagram for another package in the broader SN74LS243 family. The package key on this page is a 14-pin through-hole DIP, and the exact individual pin names should be assigned directly from the manufacturer diagram.
How many bits can the SN74LS243N transfer?
The SN74LS243N provides four data lines in each of its four transceiver elements, allowing four parallel bits to move between paired bus sides. TI describes the device as a quadruple bus transceiver for asynchronous two-way communication. It should not be confused with an eight-bit byte-wide transceiver because its organization is four bits per element.
What line impedance can SN74LS243N drive?
The SN74LS243N can drive terminated lines down to 133 ohms. According to the TI SN74LS243 product description, this capability is associated with its bus-driver output stage and is useful in legacy backplane or cabled bus arrangements. Actual signal integrity also depends on trace geometry, cable length, termination placement, and the switching rate of the connected system.
Is SN74LS243N suitable for industrial control systems?
The SN74LS243N is suitable for industrial control systems that operate at standard 74LS logic levels and remain within its specified 0°C to 70°C commercial temperature range. It is especially relevant where legacy 74LS buses must communicate asynchronously between controllers, peripherals, or test equipment. Confirm enclosure temperature, grounding, and transient protection separately because those are system-level requirements.
What is the difference between SN74LS243N and SN54LS243J?
The SN74LS243N is the commercial-temperature 74LS version, with a stated operating range of 0°C to 70°C, while the SN54LS243J is identified as the military-temperature counterpart rated from -55°C to 125°C. Both belong to the quad bus-transceiver function, but temperature qualification is the critical distinction. Confirm package dimensions and pin compatibility before approving the military-grade option.
Can SN74LS243N replace a 74HC243N?
A 74HC243N may provide a similar quad bus-transceiver function and 14-pin package, but it is not a safe unconditional substitute for the SN74LS243N. The 74HC family uses CMOS-style input thresholds and output levels, whereas the SN74LS243N uses 74LS-compatible TTL signaling. The available comparison also indicates that circuit modifications may be required, so signal-level, timing, and system-integration checks are necessary.
When should I choose SN74LS243N over another quad bus transceiver?
Choose the SN74LS243N when the design requires a 5 V 74LS-compatible, four-line, non-inverting transceiver in a 14-pin PDIP package and the system uses legacy TTL bus thresholds. Select a 74HC-family option only when the entire interface has been redesigned for CMOS levels and timing. For temperature extremes, evaluate the SN54LS243 rather than assuming the commercial SN74LS243N remains suitable.
What is the best drop-in replacement for SN74LS243N?
The closest supported replacement is SN74LS243NE4, which uses the same 14-pin PDIP format and the same 4.75 V to 5.25 V operating range. The comparison identifies consistent terminals, package, and principal performance characteristics. Because an exact drop-in should preserve logic thresholds and timing, verify those specifications in the relevant manufacturer document before approving the substitution.
Where can I buy SN74LS243N online?
Use the Request a Quote form on this page to request SN74LS243N availability, current commercial terms, and the required quantity. The form is the appropriate route for checking stock, lead time, and order handling without inserting a potentially stale transaction value into the product description. The exact manufacturer ordering designation should remain SN74LS243N unless the PCB requires another documented package variant.
How much does SN74LS243N cost?
Current commercial pricing for SN74LS243N should be requested through the Request a Quote form on this page. The form captures the exact MPN and quantity so procurement can confirm current pricing, stock, and lead time. This page does not present a static price because transaction values can change independently of the component’s electrical characteristics.
Is SN74LS243N in stock and what is its lead time?
Current SN74LS243N stock and lead time should be confirmed through the Request a Quote form on this page. Enter the required order quantity and delivery schedule so the request can be evaluated as a complete transaction rather than a generic inquiry. The manufacturer product page remains the authoritative source for ordering options and any availability notices.
What are the key specifications of SN74LS243N that engineers should know?
The key SN74LS243N specifications are a 4.75 V to 5.25 V supply range, four non-inverting push-pull bus-transceiver elements, four data lines per element, support for terminated lines down to 133 ohms, and a 14-pin PDIP package. According to the TI product page, the commercial SN74LS243 family is characterized for 0°C to 70°C operation. The device is intended for asynchronous two-way bus communication.
How do you design a PCB around SN74LS243N?
Design the PCB with the exact 14-pin PDIP footprint, including the manufacturer-specified row spacing and pin numbering. Keep the ground return path continuous, place supply bypass capacitance close to the device, and route bus traces to minimize stubs and crosstalk. Account for the package’s through-hole lead pattern and verify termination placement against the selected bus topology.

کے لیے انجینئرنگ ریفرنس ڈیٹا SN74LS243N — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the SN74LS243N when maintaining a 5 V 74LS-based asynchronous bus that requires four parallel, non-inverting, push-pull data paths and an existing 14-pin PDIP footprint. SN74LS243NE4 is the closest listed replacement when its manufacturer ordering designation fits the procurement and assembly requirements; it retains the same package, supply range, and principal function. SN74LS243N3 is another closely matching ordering option, but its exact ordering and qualification attributes should be checked before release. A 74HC243N should be considered only after redesigning the interface for CMOS voltage thresholds and timing, because a shared package or similar transceiver description does not establish TTL compatibility. For systems outside 0°C to 70°C, evaluate the military-temperature SN54LS243 family and confirm package and qualification requirements rather than using the commercial SN74LS243N without thermal qualification.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ SN74LS243NE4 SN74LS243N3
Brand Texas Instruments Texas Instruments Texas Instruments
Package 14-pin PDIP 14-pin PDIP - same 14-pin PDIP - same
Device Type Quad bus transceiver Quad bus transceiver Quad bus transceiver
Elements 4 elements 4 elements 4 elements
Data Lines per Element 4 bits per element 4 bits per element 4 bits per element
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V
Signal Polarity Non-inverting Non-inverting Non-inverting
Output Type Push-pull Push-pull Push-pull
Minimum Terminated Line Resistance 133 ohm 133 ohm 133 ohm

اہم امتیازی خصوصیات

  • Directly preserves the legacy 74LS bus interface (بمقابلہ74HC243N)
  • Matches the specified 4-bit-per-element bus organization (بمقابلہSN74LS243N3)
  • Maintains the original 14-pin PDIP implementation (بمقابلہSN74LS243NE4)

ڈیزائن نوٹس

Use the exact 14-pin PDIP footprint and verify row spacing against the TI package drawing before releasing the PCB. Keep the ground plane continuous beneath and around the device, place input and output traces away from unrelated switching nodes, and connect the supply bypass capacitor close to the package power and ground pins. The DIP outline alone is not enough to confirm mechanical interchangeability.

Termination must match the physical bus rather than being added solely because the SN74LS243N can drive terminated lines down to 133 ohms. Evaluate trace length, connector capacitance, stub branches, and the source impedance of every enabled driver. Disable unused bus drivers before direction changes so that a transition interval does not place two push-pull outputs in contention.

Do not treat a 74HC243 as an unconditional drop-in replacement for a 74LS bus. CMOS-family input thresholds, output levels, supply range, and transition behavior can differ even when the package and broad transceiver function match. For the SN74LS243N alternatives, confirm the ordering suffix and manufacturer ordering information rather than changing the part solely on a distributor search result.

Provide a stable 5 V supply within the 4.75 V to 5.25 V operating range and decouple the device close to its supply pins. When the transceiver drives a terminated line, calculate source current from the actual bus voltage and termination resistance rather than assuming the minimum supported line resistance applies continuously. This helps prevent excess driver dissipation or rail droop during simultaneous data transitions.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer material confirms the function, 5 V supply range, commercial-temperature characterization, package, and terminated-line capability. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified, so those fields remain unknown. AEC-Q100 is not applicable to this standard commercial logic device.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

SN74LS243N datasheet SN74LS243N datasheet pdf SN74LS243N pinout SN74LS243N replacement SN74LS243N equivalent SN74LS243N vs 74HC243N SN74LS243N price SN74LS243N stock Texas Instruments SN74LS243N SN74LS243N PDIP application circuit SN74LS243N 133 ohm SN74LS243N asynchronous bus interface

متعلقہ اجزاء اور اصطلاحات

Texas Instruments SN74LS243N SN74LS243 SN74LS243NE4 SN74LS243N3 SN54LS243J 74HC243N quad bus transceiver bus transceiver asynchronous two-way communication 74LS TTL TTL logic non-inverting logic push-pull output 14-pin PDIP DIP package family through-hole mounting surface-mount electronics semiconductor 133 ohm terminated line data bus bidirectional interface 0°C to 70°C 4.75 V to 5.25 V
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں