STM32F373V8H6 - 72MHz 64KB Cortex-M4 MCU | STMicroelectronics
MPN: STM32F373V8H6 ✗ اختتامِ زندگیSTM32F373V8H6 جائزہ
An STM32 microcontroller is a programmable embedded controller used to monitor inputs, execute control algorithms, and manage sensors, communications, actuators, and human-interface systems. The STM32F3 family combines an ARM Cortex-M4 processor with hardware resources suited to real-time control, signal acquisition, communications, and low-power embedded designs. STM32 devices are broadly used as the central controller in industrial equipment, consumer products, medical devices, and communication equipment.
The STM32F373V8H6 provides a 72 MHz operating frequency, 64 KB of Flash, 16 KB of SRAM, and a Cortex-M4 core according to the verified distributor and product-page data. Its 100-UFBGA package supports compact, high-density PCB layouts but requires careful assembly and layout planning because the fine-pitch ball array is not directly compatible with a standard large-lead package footprint. The device also includes floating-point hardware identified in the verified data.
The verified listing does not provide a complete set of ADC, timer, communication, and operating-temperature values, so those parameters are not inferred here. For a new design, engineers should use the official STMicroelectronics product page and datasheet to confirm pin functions, peripheral multiplexing, electrical limits, clock requirements, and package-specific layout guidance. Firmware support and peripheral configuration should also be checked against the exact STM32F373 device revision.
Typical uses include industrial monitoring, sensor acquisition, motor and motion control, embedded instrumentation, communications gateways, and compact consumer equipment. The 72 MHz Cortex-M4 core provides computational headroom for real-time control, while the 64 KB Flash and 16 KB SRAM suit moderate code and data requirements. The 100-UFBGA package is especially appropriate when board area is constrained and the assembly process supports fine-pitch BGAs.
Designers should allocate decoupling close to the supply pins, follow the manufacturer’s recommended BGA land pattern, validate signal integrity for high-speed interfaces, and confirm the exact pin multiplexing before routing external peripherals. Because the target uses a 100-UFBGA package, inspect the official package drawing and PCB footprint rather than adapting a generic QFN or LQFP layout.
This page combines verified distributor, manufacturer, and distributor-search information with practical procurement and design guidance. It distinguishes confirmed STM32F373V8H6 facts from parameters requiring official-datasheet confirmation, helping engineers evaluate the MCU without treating unverified compatibility claims as drop-in guarantees.
کے لیے ڈراپ اِن متبادل STM32F373V8H6 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں STM32F373V8H6 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Package Type, Supplier Description.
STM32F372V8H6
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →STM32F373V8H6
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →STM32F373V8
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
STM32F373V8H6
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →STM32F372V8H6
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →STM32F373V8H6 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Maximum Operating Frequency | 72 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 |
| SRAM | 16 KB |
| آپریٹنگ سپلائی وولٹیج | 2.5 V to 3.3 V |
| Architecture | 32-bit RISC |
| Floating-Point Hardware | Present |
| Product Series | STM32F3 |
| پیکیج | 100-UFBGA, 7 x 7 mm |
| Package Type | UF-BGA |
| ماؤنٹنگ ٹائپ | Surface mount |
| Supplier Description | 32-bit microcontroller IC |
| DigiKey Listing | Active |
| Mouser Description | ARM Cortex-M4, 72 MHz, 64 KB MCU |
| LCSC Listed Price | $7.2003 as of 2026-10-23 |
| LCSC Stock Statement | In stock |
STM32F373V8H6 uf-bga پن کنفیگریشن گائیڈ
STM32F373V8H6 (uf-bga پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM32F373V8H6.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
STM32F373V8H6 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Monitoring, Motor and Motion Control, Embedded Communications Gateway, Precision Instrumentation, Consumer Control Module, Real-Time Data Acquisition.
Industrial Sensor Monitoring
The STM32F373V8H6 fits compact industrial monitoring systems that need a 72 MHz ARM Cortex-M4 core for real-time signal processing and control logic. Its verified 64 KB Flash and 16 KB SRAM support moderate application firmware, configuration data, and acquisition routines. The 100-UFBGA package helps reduce board area in dense equipment, although the design must support fine-pitch BGA assembly. Confirm the ADC, timer channels, pin multiplexing, and electrical limits in the official STMicroelectronics datasheet before selecting the analog front end.
تجویز کردہ
Motor and Motion Control
The STM32F373V8H6 is a plausible candidate for motor-control and motion-control products because its verified Cortex-M4 processor operates up to 72 MHz and includes floating-point hardware. That processing capability can support control loops, sequencing, and real-time peripheral management when the required timer, PWM, encoder, and ADC resources are available. The supplied data does not verify those peripheral details, so engineers must check channel counts, pin assignments, timing performance, and current-drive requirements before finalizing the control architecture.
تجویز کردہ
Embedded Communications Gateway
STM32F373V8H6 can serve as the central controller in a compact communications gateway when its verified 72 MHz Cortex-M4 performance is sufficient for protocol processing and system management. The 64 KB Flash and 16 KB SRAM are suitable for moderate protocol stacks, state machines, and buffering, but the available evidence does not confirm the exact communication peripherals or package-level signal routing. Validate UART, USB, CAN, or other required interfaces against the official datasheet and confirm the 100-UFBGA layout with the PCB stack-up.
تجویز کردہ
Precision Instrumentation
The STM32F373V8H6 is suitable for compact instrumentation products that require deterministic embedded processing in a small board area. Its verified ARM Cortex-M4 core, 72 MHz maximum frequency, and floating-point capability can assist with calibration, measurement control, filtering, and user-interface coordination. Because the supplied data does not specify the ADC characteristics, timer accuracy, analog supply limits, or operating-temperature range, instrument designers should confirm signal-chain requirements and calibration limits directly from STMicroelectronics documentation.
تجویز کردہ
Consumer Control Module
STM32F373V8H6 can be integrated into compact consumer equipment where a small package, 72 MHz processing capability, and moderate memory are useful. Typical roles include keypad scanning, display control, actuator sequencing, and embedded state management. The verified 100-UFBGA package can reduce PCB footprint, but manufacturing and repair become more demanding than with a leaded package. Confirm all exposed-ball, ground, supply, and thermal requirements against the official package drawing before releasing a consumer assembly design.
تجویز کردہ
Real-Time Data Acquisition
The STM32F373V8H6 is a candidate for real-time acquisition systems requiring a fast embedded core and compact package. The verified 72 MHz Cortex-M4 performance and 16 KB SRAM can support buffering and acquisition control when the application workload is moderate. However, the supplied data does not establish ADC resolution, input count, sampling rate, trigger capability, or analog input range. Those specifications must be verified before choosing external sensors, amplifiers, protection networks, and the acquisition clock architecture.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا STM32F373V8H6 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | STM32F372V8H6 | STM32F373V8 | STM32F373V8H6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
اہم امتیازی خصوصیات
- Verified 72 MHz Cortex-M4 performance (بمقابلہSTM32F372V8H6)
- Confirmed memory configuration (بمقابلہSTM32F373V8)
- Fine-pitch 100-UFBGA package (بمقابلہSTM32F372V8H6)
ڈیزائن نوٹس
Use the official STM32F373V8H6 100-UFBGA land pattern rather than a generic BGA footprint. Confirm ball numbering, pad dimensions, solder-mask and paste-mask definitions, and the package orientation indicator against the manufacturer package drawing. The fine-pitch array makes courtyard, assembly clearances, and PCB warpage control especially important during manufacturing and inspection.
Place decoupling capacitors close to the STM32F373V8H6 supply and ground connections, following the capacitor quantity, voltage rating, and placement guidance in the official datasheet. Keep the high-current return path short and provide a clean source for the 2.5 V to 3.3 V supply. Do not infer bypass values from distributor listings; use the manufacturer’s recommended power-decoupling network for the final reference design.
Review the complete STM32F373V8H6 pin multiplexing before finalizing the schematic because the supplied verified data confirms the 100-UFBGA package but does not provide a ball-by-ball map. Route high-speed or sensitive signals with controlled return paths, avoid unnecessary loops, and separate noisy switching nodes from analog and communication lines. A final pinout review should be performed against the exact package revision and errata documentation.
تعمیل کی معلومات
The supplied verified data does not provide definitive compliance statements for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals status.
