STM32F373V8H6 - 72MHz 64KB Cortex-M4 MCU | STMicroelectronics
MPN： STM32F373V8H6 ✗ 停產STM32F373V8H6 概覽
An STM32 microcontroller is a programmable embedded controller used to monitor inputs, execute control algorithms, and manage sensors, communications, actuators, and human-interface systems. The STM32F3 family combines an ARM Cortex-M4 processor with hardware resources suited to real-time control, signal acquisition, communications, and low-power embedded designs. STM32 devices are broadly used as the central controller in industrial equipment, consumer products, medical devices, and communication equipment.
The STM32F373V8H6 provides a 72 MHz operating frequency, 64 KB of Flash, 16 KB of SRAM, and a Cortex-M4 core according to the verified distributor and product-page data. Its 100-UFBGA package supports compact, high-density PCB layouts but requires careful assembly and layout planning because the fine-pitch ball array is not directly compatible with a standard large-lead package footprint. The device also includes floating-point hardware identified in the verified data.
The verified listing does not provide a complete set of ADC, timer, communication, and operating-temperature values, so those parameters are not inferred here. For a new design, engineers should use the official STMicroelectronics product page and datasheet to confirm pin functions, peripheral multiplexing, electrical limits, clock requirements, and package-specific layout guidance. Firmware support and peripheral configuration should also be checked against the exact STM32F373 device revision.
Typical uses include industrial monitoring, sensor acquisition, motor and motion control, embedded instrumentation, communications gateways, and compact consumer equipment. The 72 MHz Cortex-M4 core provides computational headroom for real-time control, while the 64 KB Flash and 16 KB SRAM suit moderate code and data requirements. The 100-UFBGA package is especially appropriate when board area is constrained and the assembly process supports fine-pitch BGAs.
Designers should allocate decoupling close to the supply pins, follow the manufacturer’s recommended BGA land pattern, validate signal integrity for high-speed interfaces, and confirm the exact pin multiplexing before routing external peripherals. Because the target uses a 100-UFBGA package, inspect the official package drawing and PCB footprint rather than adapting a generic QFN or LQFP layout.
This page combines verified distributor, manufacturer, and distributor-search information with practical procurement and design guidance. It distinguishes confirmed STM32F373V8H6 facts from parameters requiring official-datasheet confirmation, helping engineers evaluate the MCU without treating unverified compatibility claims as drop-in guarantees.
直接替換替代品，適用於 STM32F373V8H6 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： STM32F373V8H6 （相同外形與佔位） — 差異在於 Package, Package Type, Supplier Description.
STM32F372V8H6
✅ 直接替換聯絡詢價
查看資料表 →STM32F373V8H6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32F373V8
✅ 直接替換📋 參考替代品（不在目錄中）
STM32F373V8H6
✅ 直接替換聯絡詢價
查看資料表 →STM32F372V8H6
✅ 直接替換聯絡詢價
查看資料表 →STM32F373V8H6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Maximum Operating Frequency | 72 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 |
| SRAM | 16 KB |
| 工作電源電壓 | 2.5 V to 3.3 V |
| Architecture | 32-bit RISC |
| Floating-Point Hardware | Present |
| Product Series | STM32F3 |
| 封裝 | 100-UFBGA, 7 x 7 mm |
| Package Type | UF-BGA |
| 安裝類型 | Surface mount |
| Supplier Description | 32-bit microcontroller IC |
| DigiKey Listing | Active |
| Mouser Description | ARM Cortex-M4, 72 MHz, 64 KB MCU |
| LCSC Listed Price | $7.2003 as of 2026-10-23 |
| LCSC Stock Statement | In stock |
STM32F373V8H6 uf-bga 腳位配置指南
STM32F373V8H6（uf-bga 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： STM32F373V8H6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F373V8H6 適用於 6 應用s: Industrial Sensor Monitoring, Motor and Motion Control, Embedded Communications Gateway, Precision Instrumentation, Consumer Control Module, Real-Time Data Acquisition.
Industrial Sensor Monitoring
The STM32F373V8H6 fits compact industrial monitoring systems that need a 72 MHz ARM Cortex-M4 core for real-time signal processing and control logic. Its verified 64 KB Flash and 16 KB SRAM support moderate application firmware, configuration data, and acquisition routines. The 100-UFBGA package helps reduce board area in dense equipment, although the design must support fine-pitch BGA assembly. Confirm the ADC, timer channels, pin multiplexing, and electrical limits in the official STMicroelectronics datasheet before selecting the analog front end.
推薦
Motor and Motion Control
The STM32F373V8H6 is a plausible candidate for motor-control and motion-control products because its verified Cortex-M4 processor operates up to 72 MHz and includes floating-point hardware. That processing capability can support control loops, sequencing, and real-time peripheral management when the required timer, PWM, encoder, and ADC resources are available. The supplied data does not verify those peripheral details, so engineers must check channel counts, pin assignments, timing performance, and current-drive requirements before finalizing the control architecture.
推薦
Embedded Communications Gateway
STM32F373V8H6 can serve as the central controller in a compact communications gateway when its verified 72 MHz Cortex-M4 performance is sufficient for protocol processing and system management. The 64 KB Flash and 16 KB SRAM are suitable for moderate protocol stacks, state machines, and buffering, but the available evidence does not confirm the exact communication peripherals or package-level signal routing. Validate UART, USB, CAN, or other required interfaces against the official datasheet and confirm the 100-UFBGA layout with the PCB stack-up.
推薦
Precision Instrumentation
The STM32F373V8H6 is suitable for compact instrumentation products that require deterministic embedded processing in a small board area. Its verified ARM Cortex-M4 core, 72 MHz maximum frequency, and floating-point capability can assist with calibration, measurement control, filtering, and user-interface coordination. Because the supplied data does not specify the ADC characteristics, timer accuracy, analog supply limits, or operating-temperature range, instrument designers should confirm signal-chain requirements and calibration limits directly from STMicroelectronics documentation.
推薦
Consumer Control Module
STM32F373V8H6 can be integrated into compact consumer equipment where a small package, 72 MHz processing capability, and moderate memory are useful. Typical roles include keypad scanning, display control, actuator sequencing, and embedded state management. The verified 100-UFBGA package can reduce PCB footprint, but manufacturing and repair become more demanding than with a leaded package. Confirm all exposed-ball, ground, supply, and thermal requirements against the official package drawing before releasing a consumer assembly design.
推薦
Real-Time Data Acquisition
The STM32F373V8H6 is a candidate for real-time acquisition systems requiring a fast embedded core and compact package. The verified 72 MHz Cortex-M4 performance and 16 KB SRAM can support buffering and acquisition control when the application workload is moderate. However, the supplied data does not establish ADC resolution, input count, sampling rate, trigger capability, or analog input range. Those specifications must be verified before choosing external sensors, amplifiers, protection networks, and the acquisition clock architecture.
推薦
推薦產品摘要
工程參考資料，適用於 STM32F373V8H6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F372V8H6 | STM32F373V8 | STM32F373V8H6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
主要差異化特點
- Verified 72 MHz Cortex-M4 performance (對比STM32F372V8H6)
- Confirmed memory configuration (對比STM32F373V8)
- Fine-pitch 100-UFBGA package (對比STM32F372V8H6)
設計說明
Use the official STM32F373V8H6 100-UFBGA land pattern rather than a generic BGA footprint. Confirm ball numbering, pad dimensions, solder-mask and paste-mask definitions, and the package orientation indicator against the manufacturer package drawing. The fine-pitch array makes courtyard, assembly clearances, and PCB warpage control especially important during manufacturing and inspection.
Place decoupling capacitors close to the STM32F373V8H6 supply and ground connections, following the capacitor quantity, voltage rating, and placement guidance in the official datasheet. Keep the high-current return path short and provide a clean source for the 2.5 V to 3.3 V supply. Do not infer bypass values from distributor listings; use the manufacturer’s recommended power-decoupling network for the final reference design.
Review the complete STM32F373V8H6 pin multiplexing before finalizing the schematic because the supplied verified data confirms the 100-UFBGA package but does not provide a ball-by-ball map. Route high-speed or sensitive signals with controlled return paths, avoid unnecessary loops, and separate noisy switching nodes from analog and communication lines. A final pinout review should be performed against the exact package revision and errata documentation.
合規資訊
The supplied verified data does not provide definitive compliance statements for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals status.
