STM32L431KBU3 - 80MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32L431KBU3 ✓ فعالSTM32L431KBU3 جائزہ
An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during active processing, sleep, standby and shutdown operation. The STM32L4 family belongs to the embedded microcontroller hierarchy, combining a general-purpose Arm Cortex-M4 core with low-power modes, integrated communications peripherals and energy-conscious system features. This makes it suitable for battery-operated sensors, industrial controls, connected equipment and compact consumer devices where average current consumption matters as much as processing performance.
The STM32L431KBU3's key features include an 80 MHz Arm Cortex-M4 core with FPU, 128 KB of Flash and 64 KB of SRAM. Its 32-UFQFPN package measures 5 x 5 mm with a 0.55 mm pitch and includes an exposed pad. The device is identified as an industrial-temperature UFQFPN offering and is presented by STMicroelectronics as part of the STM32L4 ultra-low-power portfolio. Its compact footprint supports space-constrained boards without requiring a high-pin-count package.
The Cortex-M4 architecture provides a 32-bit RISC instruction set, hardware floating-point capability and deterministic embedded-control performance. The STM32L431KBU3 combines that processing capability with 128 KB of embedded Flash for firmware and 64 KB of SRAM for working memory. STMicroelectronics positions the STM32L431xx family for applications requiring low power, security-oriented embedded control and a broad peripheral ecosystem. Firmware development can use the STM32Cube and Arm Cortex-M software environments.
Typical uses include industrial sensor nodes, low-power data loggers, connected measurement equipment, compact motor-control modules and portable medical or building-automation devices. The 80 MHz core supports responsive control and communication workloads, while the low-power MCU architecture targets systems that spend substantial time in sleep or standby states. The UFQFPN format also assists designers creating small, densely populated assemblies.
PCB implementation requires careful treatment of the exposed thermal pad, ground return paths and high-speed signal routing. Follow the manufacturer pinout, land-pattern and decoupling guidance when assigning power, ground, reset and signal connections. Confirm that the exposed pad is connected to the intended ground plane and that the assembled PCB meets the package's thermal requirements.
This product overview combines the manufacturer specifications with package details, practical application guidance and carefully qualified replacement options. It also highlights the differences that matter when comparing same-footprint STM32L4 devices, including memory capacity, ordering suffix and device-specific functionality.
کے لیے ڈراپ اِن متبادل STM32L431KBU3 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں STM32L431KBU3 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Processor Core, Flash Memory, Package, Package Dimensions, Product Type.
STM32L432KCU3
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →STM32L432KCU6
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →STM32L431KBU3 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 128 KB |
| SRAM | 64 KB |
| Instruction Set | 32-bit Arm RISC |
| Operating Supply Voltage Options | 1.8 V, 2.5 V or 3.3 V |
| پیکیج | 32-pin UFQFPN |
| Package Dimensions | 5 x 5 mm |
| Package Pitch | 0.55 mm |
| Exposed Pad | Yes |
| ماؤنٹنگ ٹائپ | Surface mount |
| Shipping Form | Tray |
| Number of I/O Pins | 32 pins |
STM32L431KBU3 0.55 mm پن کنفیگریشن گائیڈ
STM32L431KBU3 (0.55 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM32L431KBU3.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
STM32L431KBU3 کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Node, Industrial Measurement and Control, Connected IoT Gateway Module, Low-Power Data Logger, Compact Motor-Control Module, Portable Medical Monitoring Device.
Battery-Powered Sensor Node
The STM32L431KBU3 fits battery-powered sensor nodes that need responsive local processing without the continuous power cost of a higher-performance MCU. Its Arm Cortex-M4 core operates at up to 80 MHz, while 128 KB of Flash and 64 KB of SRAM support acquisition routines, filtering, configuration and a lightweight communications stack. The ultra-low-power STM32L4 architecture is appropriate when the controller spends substantial time in sleep or standby and wakes to service a sensor. Engineering validation should compare the selected sleep mode, wake timing and peripheral clock states against the system battery-current target.
تجویز کردہ
Industrial Measurement and Control
The STM32L431KBU3 suits compact industrial measurement modules that combine sensor conditioning, digital control and local data processing. Its 80 MHz Cortex-M4 processor provides deterministic control performance, while the 64 KB of SRAM supports working buffers and 128 KB of Flash holds application firmware. The 32-pin UFQFPN keeps the controller physically compact without sacrificing access to a broad peripheral set. For factory equipment, validate the exact peripheral assignments, operating-temperature requirements and isolation boundaries before releasing the design for production.
تجویز کردہ
Connected IoT Gateway Module
The STM32L431KBU3 can act as the low-power control processor in a connected IoT module that gathers sensor information and manages a communications interface. The 80 MHz Cortex-M4 core can handle protocol state machines and application processing, while 128 KB of Flash accommodates firmware and 64 KB of SRAM accommodates packet handling. Its low-power MCU positioning helps manage energy use between network activity. System-level power and latency should be verified with the actual radio, sensor and power-management circuitry because those companion components often dominate the final energy budget.
تجویز کردہ
Low-Power Data Logger
The STM32L431KBU3 is appropriate for portable data-logging equipment that periodically records sensor readings and then returns to a low-energy state. Its 128 KB of Flash provides internal firmware and data-management space, and the 64 KB of SRAM can support acquisition and formatting buffers. The 80 MHz core allows the controller to compress or timestamp samples without limiting the design to a basic low-clock microcontroller. Use the device's low-power modes with the logger's timer and storage interface so that the system-level sleep current reflects actual board behavior.
تجویز کردہ
Compact Motor-Control Module
The STM32L431KBU3 can support compact motor-control modules where fast control-loop execution and low standby consumption are both important. Its Arm Cortex-M4 core runs at up to 80 MHz, providing enough computation for motor algorithms and supervisory logic, while 128 KB of Flash and 64 KB of SRAM support embedded control software. The compact 32-UFQFPN package also helps reduce controller-board area. Motor designs must additionally validate timer channels, PWM outputs, pin multiplexing, thermal performance and protection behavior for the specific motor and drive topology.
تجویز کردہ
Portable Medical Monitoring Device
The STM32L431KBU3 fits portable monitoring devices that perform local sensor processing while prioritizing energy efficiency. The Cortex-M4 processor can execute filtering and control functions at up to 80 MHz, and the 128 KB of Flash supports embedded application code without requiring a separate processor in compact products. Its low-power MCU architecture is useful in devices that alternate between active measurement and sleep intervals. Medical designs still require application-specific validation, including safety analysis, input protection, calibration, alarm behavior and confirmation of the exact electrical limits for the intended operating environment.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا STM32L431KBU3 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | STM32L432KCU3 | STM32L432KCU6 |
|---|---|---|---|
| Package | 32-UFQFPN (5 x 5 mm) | 32-QFPN | 32-QFPN |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 128 KB | 256 KB | 256 KB |
| Device Family | STM32L431KB | STM32L432 | STM32L432 |
اہم امتیازی خصوصیات
- Lower Flash capacity provides a closer fit for memory-constrained firmware (بمقابلہSTM32L432KCU3)
- Target-specific STM32L431KB device configuration (بمقابلہSTM32L432KCU3)
- Compact exposed-pad package supports dense embedded boards (بمقابلہSTM32L432KCU6)
ڈیزائن نوٹس
Treat the exposed pad as an electrical and thermal connection, not merely a mechanical feature. Follow the STMicroelectronics package drawing for pad dimensions, solder-mask definition, paste pattern and via arrangement. Keep the pad connected to the intended ground reference unless the manufacturer specifies otherwise. Adequate exposed copper improves heat transfer from the 5 x 5 mm package and helps maintain consistent electrical performance in compact, enclosed assemblies.
Assign pins directly from the STM32L431KBU3 datasheet rather than a generic 32-pin QFN symbol. Place bypass capacitors close to the applicable power pins and provide a clean ground reference beneath the device. Maintain the manufacturer-recommended land pattern and inspect the assembled package for voiding or solder bridging around the 0.55 mm-pitch leads. PCB review should also verify exposed-pad alignment before the first production build.
Use the manufacturer's voltage definitions to configure the MCU and connected peripherals across the 1.8 V, 2.5 V or 3.3 V operating options. Confirm startup behavior, internal regulator requirements and brownout limits for the selected power architecture. For low-power products, measure current in every relevant sleep mode because peripheral clocks, debug interfaces and board-level indicator circuits can prevent the MCU core from reaching its expected low-current target.
Do not treat a shared package as proof that every peripheral function is identical between the STM32L431KBU3 and an STM32L432 candidate. Compare power pins, ground connections, oscillator pins, debugging interfaces, timer channels, communication pins and exposed-pad requirements. For firmware migration, review the boot configuration, vector-table layout, memory size assumptions and device-specific peripheral differences rather than assuming that STM32Cube configuration transfers without review.
تعمیل کی معلومات
RoHS, REACH, AEC-Q100, lead-free, halogen-free and conflict-mineral status require confirmation from the manufacturer or current product documentation.