STMicroelectronics

STM32L431KBU3 - 80MHz Cortex-M4 MCU | STMicroelectronics

料号: STM32L431KBU3 ✓ 量产中
1.8 V, 2.5 V or 3.3 V Vdss 32-pin UFQFPN Package 80 MHz Speed 128 KB Memory
最小起订量: 1 |

STM32L431KBU3 概述

The STMicroelectronics STM32L431KBU3 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor with a floating-point unit. It operates at up to 80 MHz, provides 128 KB of Flash memory and 64 KB of SRAM, and is packaged in a 32-pin UFQFPN measuring 5 x 5 mm with an exposed pad. The MCU supports operation from 1.8 V, 2.5 V or 3.3 V, making it suitable for compact, low-energy embedded systems.

An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during active processing, sleep, standby and shutdown operation. The STM32L4 family belongs to the embedded microcontroller hierarchy, combining a general-purpose Arm Cortex-M4 core with low-power modes, integrated communications peripherals and energy-conscious system features. This makes it suitable for battery-operated sensors, industrial controls, connected equipment and compact consumer devices where average current consumption matters as much as processing performance.

The STM32L431KBU3's key features include an 80 MHz Arm Cortex-M4 core with FPU, 128 KB of Flash and 64 KB of SRAM. Its 32-UFQFPN package measures 5 x 5 mm with a 0.55 mm pitch and includes an exposed pad. The device is identified as an industrial-temperature UFQFPN offering and is presented by STMicroelectronics as part of the STM32L4 ultra-low-power portfolio. Its compact footprint supports space-constrained boards without requiring a high-pin-count package.

The Cortex-M4 architecture provides a 32-bit RISC instruction set, hardware floating-point capability and deterministic embedded-control performance. The STM32L431KBU3 combines that processing capability with 128 KB of embedded Flash for firmware and 64 KB of SRAM for working memory. STMicroelectronics positions the STM32L431xx family for applications requiring low power, security-oriented embedded control and a broad peripheral ecosystem. Firmware development can use the STM32Cube and Arm Cortex-M software environments.

Typical uses include industrial sensor nodes, low-power data loggers, connected measurement equipment, compact motor-control modules and portable medical or building-automation devices. The 80 MHz core supports responsive control and communication workloads, while the low-power MCU architecture targets systems that spend substantial time in sleep or standby states. The UFQFPN format also assists designers creating small, densely populated assemblies.

PCB implementation requires careful treatment of the exposed thermal pad, ground return paths and high-speed signal routing. Follow the manufacturer pinout, land-pattern and decoupling guidance when assigning power, ground, reset and signal connections. Confirm that the exposed pad is connected to the intended ground plane and that the assembled PCB meets the package's thermal requirements.

This product overview combines the manufacturer specifications with package details, practical application guidance and carefully qualified replacement options. It also highlights the differences that matter when comparing same-footprint STM32L4 devices, including memory capacity, ordering suffix and device-specific functionality.

直接替换替代料: STM32L431KBU3 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: STM32L431KBU3 (相同外形与封装尺寸) ——差异在于 Processor Core, Flash Memory, Package, Package Dimensions, Product Type.

STMicroelectronics
Processor Core: Arm Cortex-M4
Package Dimensions: 5 mm x 5 mm
对比 STM32L431KBU3 →
STMicroelectronics
Processor Core: Arm Cortex-M4, 32 bit
Flash Memory: 256 KB
Package Dimensions: 5 mm x 5 mm
对比 STM32L431KBU3 →
STMicroelectronics
Flash Memory: 256 KB
Package: UFQFPN-32 (5x5 mm)
对比 STM32L431KBU3 →

STM32L432KCU3

✅ 直接替换
STMicroelectronics
📦 32-UFQFPN
32-bit ultra-low-power microcontroller · Arm Cortex-M4, 32 bit · 80 MHz · 100 DMIPS · 256 KB · 64 KB · Present · USB full-speed

联系询价

查看数据手册 →

STM32L432KCU6

✅ 直接替换
STMicroelectronics
📦 32-UFQFPN
Arm Cortex-M4 with FPU, 32-bit · 80 MHz · 256 KB · 64 KB · 1.71 V to 3.6 V · 100 nA · 3.4 uA with RTC · 12-bit with hardware oversampling

联系询价

查看数据手册 →

STM32L431KBU3 最大额定值与电气特性

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 80 MHz
Flash Memory 128 KB
SRAM 64 KB
Instruction Set 32-bit Arm RISC
Operating Supply Voltage Options 1.8 V, 2.5 V or 3.3 V
封装 32-pin UFQFPN
Package Dimensions 5 x 5 mm
Package Pitch 0.55 mm
Exposed Pad Yes
安装类型 Surface mount
Shipping Form Tray
Number of I/O Pins 32 pins

STM32L431KBU3 0.55 mm 引脚配置指南

STM32L431KBU3(0.55 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

STM32L431KBU3 的 0.55 mm 封装引脚图

暂无详细引脚数据: STM32L431KBU3.

请参阅 数据手册 以查看完整引脚配置。

典型应用

STM32L431KBU3 适用于 6 应用s: Battery-Powered Sensor Node, Industrial Measurement and Control, Connected IoT Gateway Module, Low-Power Data Logger, Compact Motor-Control Module, Portable Medical Monitoring Device.

🧩

Battery-Powered Sensor Node

The STM32L431KBU3 fits battery-powered sensor nodes that need responsive local processing without the continuous power cost of a higher-performance MCU. Its Arm Cortex-M4 core operates at up to 80 MHz, while 128 KB of Flash and 64 KB of SRAM support acquisition routines, filtering, configuration and a lightweight communications stack. The ultra-low-power STM32L4 architecture is appropriate when the controller spends substantial time in sleep or standby and wakes to service a sensor. Engineering validation should compare the selected sleep mode, wake timing and peripheral clock states against the system battery-current target.

🏭

Industrial Measurement and Control

The STM32L431KBU3 suits compact industrial measurement modules that combine sensor conditioning, digital control and local data processing. Its 80 MHz Cortex-M4 processor provides deterministic control performance, while the 64 KB of SRAM supports working buffers and 128 KB of Flash holds application firmware. The 32-pin UFQFPN keeps the controller physically compact without sacrificing access to a broad peripheral set. For factory equipment, validate the exact peripheral assignments, operating-temperature requirements and isolation boundaries before releasing the design for production.

🌐

Connected IoT Gateway Module

The STM32L431KBU3 can act as the low-power control processor in a connected IoT module that gathers sensor information and manages a communications interface. The 80 MHz Cortex-M4 core can handle protocol state machines and application processing, while 128 KB of Flash accommodates firmware and 64 KB of SRAM accommodates packet handling. Its low-power MCU positioning helps manage energy use between network activity. System-level power and latency should be verified with the actual radio, sensor and power-management circuitry because those companion components often dominate the final energy budget.

📟

Low-Power Data Logger

The STM32L431KBU3 is appropriate for portable data-logging equipment that periodically records sensor readings and then returns to a low-energy state. Its 128 KB of Flash provides internal firmware and data-management space, and the 64 KB of SRAM can support acquisition and formatting buffers. The 80 MHz core allows the controller to compress or timestamp samples without limiting the design to a basic low-clock microcontroller. Use the device's low-power modes with the logger's timer and storage interface so that the system-level sleep current reflects actual board behavior.

🔧

Compact Motor-Control Module

The STM32L431KBU3 can support compact motor-control modules where fast control-loop execution and low standby consumption are both important. Its Arm Cortex-M4 core runs at up to 80 MHz, providing enough computation for motor algorithms and supervisory logic, while 128 KB of Flash and 64 KB of SRAM support embedded control software. The compact 32-UFQFPN package also helps reduce controller-board area. Motor designs must additionally validate timer channels, PWM outputs, pin multiplexing, thermal performance and protection behavior for the specific motor and drive topology.

💊

Portable Medical Monitoring Device

The STM32L431KBU3 fits portable monitoring devices that perform local sensor processing while prioritizing energy efficiency. The Cortex-M4 processor can execute filtering and control functions at up to 80 MHz, and the 128 KB of Flash supports embedded application code without requiring a separate processor in compact products. Its low-power MCU architecture is useful in devices that alternate between active measurement and sleep intervals. Medical designs still require application-specific validation, including safety analysis, input protection, calibration, alarm behavior and confirmation of the exact electrical limits for the intended operating environment.

What is the STM32L431KBU3?
The STM32L431KBU3 is an ultra-low-power 32-bit STMicroelectronics microcontroller built around an Arm Cortex-M4 core with a floating-point unit. According to the STMicroelectronics product page, it operates at up to 80 MHz and belongs to the STM32L4 family. The device includes 128 KB of Flash memory, 64 KB of SRAM and a 32-pin UFQFPN package measuring 5 x 5 mm.
What are the key specifications of STM32L431KBU3 that engineers should know?
The STM32L431KBU3 combines an 80 MHz Arm Cortex-M4 processor with FPU, 128 KB of Flash memory, 64 KB of SRAM and operation from 1.8 V, 2.5 V or 3.3 V. According to the STMicroelectronics STM32L431KB product documentation, it is a 32-bit RISC microcontroller in a 32-UFQFPN package. The package is 5 x 5 mm, has a 0.55 mm pitch and includes an exposed pad.
Where can I download the STM32L431KBU3 datasheet PDF?
The STM32L431KBU3 datasheet and product resources are available through the official STMicroelectronics STM32L431KB product page at https://www.st.com/en/microcontrollers-microprocessors/stm32l431kb.html. The device datasheet is the controlling source for the complete electrical characteristics, memory map, package drawings, pin definitions and recommended application circuits.
Where can I find the STM32L431KBU3 pinout and package drawing?
The STM32L431KBU3 pinout and land pattern are found in the pin-definition and package sections of the STMicroelectronics STM32L431KB datasheet. The component uses a 32-pin UFQFPN package with an exposed pad, so the exposed-pad connection and thermal-via arrangement should be copied from the manufacturer drawing rather than inferred from a generic QFN layout.
Can STM32L432KCU3 replace STM32L431KBU3?
The STM32L432KCU3 is a same-footprint STM32L4 alternative with a 32-QFPN package, but it increases Flash memory from 128 KB to 256 KB. The STM32L431KBU3 and STM32L432KCU3 both use the 80 MHz Arm Cortex-M4 architecture, while the larger memory of the alternative is the principal measured difference. Confirm peripheral assignments, temperature grade and firmware-memory constraints before approving a substitution.
What is the best drop-in replacement for STM32L431KBU3?
The closest identified same-footprint option is the STM32L432KCU3, which uses a 32-QFPN package and retains the 80 MHz Arm Cortex-M4 architecture. Its principal difference is 256 KB of Flash versus 128 KB in the STM32L431KBU3. A true drop-in decision still requires checking the exact pin functions, exposed-pad requirements and application-specific peripherals in the manufacturer pinout tables.
STM32L431KBU3 vs STM32L432KCU3 — which is better for a memory-constrained design?
The STM32L431KBU3 is better when 128 KB of Flash is sufficient and minimizing unused memory is a priority. The STM32L432KCU3 provides 256 KB of Flash, which is 128 KB more, while both parts use a 32-pin package and run at up to 80 MHz. The STM32L431KBU3 therefore offers the closer capacity match, although final suitability depends on pin, peripheral and firmware requirements.
When should I choose STM32L431KBU3 over STM32L432KCU3?
Choose the STM32L431KBU3 when its 128 KB of Flash and 64 KB of SRAM are sufficient for the application and you want to match an established 32-UFQFPN design. The STM32L432KCU3 offers 256 KB of Flash while retaining the 80 MHz Cortex-M4 core, making it more useful when additional code or data storage is required. Both choices require checking the manufacturer pinout for device-specific differences.
Is STM32L431KBU3 suitable for battery-powered sensor nodes?
The STM32L431KBU3 is suitable for battery-powered sensor nodes because it is an ultra-low-power MCU with an Arm Cortex-M4 core operating at up to 80 MHz. The STM32L4 family's low-power operating modes support designs that spend much of their time idle, while 128 KB of Flash and 64 KB of SRAM provide room for sensor processing and local communications. Actual battery life depends on the selected sleep mode, sensor duty cycle and peripheral configuration.
What is the lead time for STM32L431KBU3?
The current manufacturer lead time for STM32L431KBU3 should be confirmed through the Request a Quote form on this page. STMicroelectronics lists the device for direct purchase through its online store, but production capacity and delivery scheduling can vary with order quantity, packaging form and regional inventory. Request a firm lead time and minimum-order quantity for the planned build.
Is STM32L431KBU3 in stock?
STM32L431KBU3 availability changes with order volume and regional inventory. The Request a Quote form on this page can provide current stock and lead-time confirmation for the exact UFQFPN ordering code. Specify your required quantity, target date and acceptable shipping terms so the procurement team can return a current sourcing response.
Where to buy STM32L431KBU3 online?
Use the Request a Quote form on this page to request STM32L431KBU3 pricing, stock and delivery support. Quote the complete MPN STM32L431KBU3 to avoid confusion with other STM32L431KB ordering codes. The manufacturer's product page identifies the device as a 32-pin UFQFPN, 80 MHz Cortex-M4 MCU with 128 KB of Flash, which should match the component required by your schematic.
What can replace STM32L431KBU3 without changing the PCB?
The STM32L432KCU3 is the identified candidate for a same-package replacement because it uses a 32-QFPN footprint and retains the 80 MHz Cortex-M4 core. Its Flash capacity is 256 KB rather than 128 KB. Before modifying an assembled PCB, verify every exposed-pad connection and every assigned pin against both manufacturer datasheets, because package equality alone does not guarantee identical peripheral functions.
Is the STM32L431KBU3 the same as the STM32L432KCU3?
No, the STM32L431KBU3 and STM32L432KCU3 are related but not identical devices. Both use a 32-pin package and an Arm Cortex-M4 core rated up to 80 MHz, while their Flash capacities are 128 KB and 256 KB respectively. The STM32L431KBU3 also belongs to the STM32L431KB family; review the device-specific peripheral and pin descriptions before treating either part as interchangeable.
What software tools support STM32L431KBU3?
The STM32L431KBU3 is supported by STMicroelectronics' STM32Cube development environment and the Arm Cortex-M software toolchain. Developers can use the family's device configuration, peripheral libraries, examples and debugging resources when creating an application. The processor's Arm Cortex-M4 core with FPU supports standard embedded C/C++ development, while STMicroelectronics ecosystem utilities help configure clocks, low-power modes and peripherals.

工程参考数据: STM32L431KBU3 ——对比、设计指导和合规信息。

选型指南

Choose the STM32L431KBU3 when an existing design targets the STM32L431KB family and its 128 KB of Flash, 64 KB of SRAM and 80 MHz Cortex-M4 performance are sufficient. It is a natural fit for compact, low-energy sensor, measurement and industrial-control products using the 32-UFQFPN footprint. Consider the STM32L432KCU3 when the same package and processing speed are useful but 256 KB of Flash is needed for additional firmware or data. The STM32L432KCU6 is relevant when its ordering and qualification characteristics match the production requirement. In every case, compare the manufacturer pin-definition tables, exposed-pad layout, oscillator and debug connections, peripheral assignments, voltage limits and temperature requirements before approving a drop-in replacement.

与替代料对比

参数 本产品 STM32L432KCU3 STM32L432KCU6
Package 32-UFQFPN (5 x 5 mm) 32-QFPN 32-QFPN
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Processor Core Arm Cortex-M4 with FPU Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 80 MHz 80 MHz 80 MHz
Flash Memory 128 KB 256 KB 256 KB
Device Family STM32L431KB STM32L432 STM32L432

关键差异点

  • Lower Flash capacity provides a closer fit for memory-constrained firmware (对比 STM32L432KCU3)
  • Target-specific STM32L431KB device configuration (对比 STM32L432KCU3)
  • Compact exposed-pad package supports dense embedded boards (对比 STM32L432KCU6)

设计说明

Treat the exposed pad as an electrical and thermal connection, not merely a mechanical feature. Follow the STMicroelectronics package drawing for pad dimensions, solder-mask definition, paste pattern and via arrangement. Keep the pad connected to the intended ground reference unless the manufacturer specifies otherwise. Adequate exposed copper improves heat transfer from the 5 x 5 mm package and helps maintain consistent electrical performance in compact, enclosed assemblies.

Assign pins directly from the STM32L431KBU3 datasheet rather than a generic 32-pin QFN symbol. Place bypass capacitors close to the applicable power pins and provide a clean ground reference beneath the device. Maintain the manufacturer-recommended land pattern and inspect the assembled package for voiding or solder bridging around the 0.55 mm-pitch leads. PCB review should also verify exposed-pad alignment before the first production build.

Use the manufacturer's voltage definitions to configure the MCU and connected peripherals across the 1.8 V, 2.5 V or 3.3 V operating options. Confirm startup behavior, internal regulator requirements and brownout limits for the selected power architecture. For low-power products, measure current in every relevant sleep mode because peripheral clocks, debug interfaces and board-level indicator circuits can prevent the MCU core from reaching its expected low-current target.

Do not treat a shared package as proof that every peripheral function is identical between the STM32L431KBU3 and an STM32L432 candidate. Compare power pins, ground connections, oscillator pins, debugging interfaces, timer channels, communication pins and exposed-pad requirements. For firmware migration, review the boot configuration, vector-table layout, memory size assumptions and device-specific peripheral differences rather than assuming that STM32Cube configuration transfers without review.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free and conflict-mineral status require confirmation from the manufacturer or current product documentation.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

STM32L431KBU3 datasheet STM32L431KBU3 pinout STM32L431KBU3 datasheet pdf STM32L431KBU3 replacement STM32L431KBU3 equivalent STM32L431KBU3 vs STM32L432KCU3 STM32L431KBU3 UFQFPN pinout STM32L431KBU3 80MHz specifications STMicroelectronics STM32L431KBU3 STM32L431KBU3 application circuit STM32L431KBU3 price STM32L431KBU3 stock

相关元器件 & 术语

STMicroelectronics STM32L431KBU3 STM32L431KB STM32L432KCU3 STM32L432KCU6 Arm Cortex-M4 Arm Cortex-M4 with FPU 32-bit RISC core ultra-low-power microcontroller embedded microcontroller STM32L4 family 128 KB Flash memory 64 KB SRAM 80 MHz 32-UFQFPN QFN package family surface-mount package exposed pad 1.8 V 2.5 V 3.3 V low-power sensor node industrial measurement and control STM32Cube Arm Cortex-M software tools
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情