SY89854UMI - 1:4 3.5 GHz Clock Buffer | Microchip | LVPECL
MPN: SY89854UMI ✓ فعالSY89854UMI جائزہ
A clock fanout buffer is a clock-and-timing integrated circuit that distributes one incoming clock signal to multiple synchronized outputs. Clock-and-timing ICs sit above comparators and oscillators in the signal-chain hierarchy, preserving edge timing while isolating source and destination circuits from loading. A logic translator within the same device converts CML, LVDS, or PECL input levels into LVPECL outputs, simplifying interfaces between mixed logic families.
The principal performance characteristics are a 1:4 fanout ratio, a 3.5 GHz maximum frequency, CML/LVDS/PECL input support, and LVPECL output signaling. The 16-VFQFN exposed-pad package also provides a thermal path for removing internally generated heat, although exact power dissipation and junction-temperature limits must be confirmed against the manufacturer datasheet before a design is released.
The SY89854UMI is intended for systems in which one source must drive four receivers without degrading edge quality or amplitude. Typical circuit positions include the transmit-side output of a serial transceiver, the fanout stage of a backplane clocking tree, and the distribution point feeding parallel converters, retimers, or high-speed logic. Its multi-input translation capability allows the same distributor to operate across several source signaling conventions.
Use short, impedance-controlled connections between the device and its clock source, and follow the reference-layout and bypass recommendations in the manufacturer datasheet. Decoupling capacitors should be placed directly beside the supply pins, while output traces should avoid stubs, excessive vias, and uncontrolled branch lengths that could degrade the 3.5 GHz edge rate.
This page combines device specifications, application guidance, package details, and related Precision Edge family options for faster component evaluation. Verify the complete pin description, input-output truth table, supply limits, and recommended termination network against the current Microchip documentation before layout release.
کے لیے ڈراپ اِن متبادل SY89854UMI — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں SY89854UMI (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Fanout Ratio, Output Logic.
SY89855UMI
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SY89856UMI
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SY89857UMI
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SY89854UMG-TR
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
SY89872UMG
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →SY89854UMI تفصیلات
| Device Type | Clock fanout buffer and logic translator |
| Fanout Ratio | 1:4 |
| Maximum Frequency | 3.5 GHz |
| Supported Inputs | CML, LVDS, PECL |
| Output Logic | LVPECL |
| آؤٹ پٹس کی تعداد | 4 outputs |
| پیکیج | 16-VFQFN Exposed Pad, 16-MLF |
| ماؤنٹنگ ٹائپ | Surface mount |
| Product Series | Precision Edge |
SY89854UMI 16-vfqfn exposed pad, 16-mlf پن کنفیگریشن گائیڈ
SY89854UMI (16-vfqfn exposed pad, 16-mlf پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SY89854UMI.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
SY89854UMI کے لیے موزوں ہے 6 ایپلیکیشنs: Telecommunications Backplane Clock Distribution, SerDes Transceiver Clock Fanout, Data-Center Switch Clock Tree, High-Speed Test and Measurement Equipment, Optical Module Interface Clocking, Parallel Converter and Retimer Clock Fanout.
Telecommunications Backplane Clock Distribution
The SY89854UMI fits a backplane distribution point where one recovered reference clock must feed four high-speed line-card circuits. Its 1:4 fanout provides separate output paths, while CML, LVDS, or PECL input support allows operation beside transceivers using different logic conventions. The LVPECL outputs support receiver interfaces commonly found in telecommunications equipment. Routing the four outputs as short, controlled-impedance branches helps preserve edge quality at rates approaching the device's 3.5 GHz maximum. Designers should apply the recommended termination and reference layout, then verify eye margin and jitter in the assembled board.
تجویز کردہ
SerDes Transceiver Clock Fanout
A common clock fanout stage sits between a transceiver's recovered clock output and several parallel converters or retimers. The SY89854UMI provides four outputs from one source and can translate CML, LVDS, or PECL into LVPECL, reducing the need for separate level translators. Its 3.5 GHz maximum frequency supports demanding serial links while the compact 16-VFQFN package keeps the clock-distribution block close to the high-speed devices. Place the buffer near the source, keep output branch lengths controlled, and avoid routing clock signals beneath noisy switching stages.
تجویز کردہ
Data-Center Switch Clock Tree
The SY89854UMI can distribute a common 3.5 GHz-class reference clock to four switching or interface blocks within a data-center design. Its 1:4 organization suits systems that need multiple receiver-ready clocks while limiting fanout on the upstream source. CML, LVDS, and PECL input options allow the part to sit after several kinds of clock-generation or recovery blocks, and the LVPECL outputs provide a consistent downstream interface. For best results, maintain continuous reference planes, use the manufacturer's recommended supply bypass arrangement, and test each branch for jitter and amplitude margin under worst-case loading.
تجویز کردہ
High-Speed Test and Measurement Equipment
Instrumentation front ends often need one precision timing reference distributed to several acquisition or processing channels. The SY89854UMI provides four LVPECL outputs from a single input and supports CML, LVDS, or PECL sources at up to 3.5 GHz, making it suitable for high-speed sampling systems and automated test equipment. Separate outputs help isolate channel loading and reduce the sensitivity of the master clock to one downstream device. Keep traces short, terminate each output according to the recommended circuit, and account for probe or cable loading when evaluating timing accuracy.
تجویز کردہ
Optical Module Interface Clocking
Optical and network modules frequently combine several high-speed lanes with a distributed reference clock. The SY89854UMI can translate a CML, LVDS, or PECL reference into four LVPECL clock outputs, allowing a common timing source to feed parallel converters or retimers. Its 3.5 GHz maximum operating frequency supports high-bandwidth module architectures while the 16-VFQFN footprint conserves limited board area. Place the device close to the clock source, keep supply and ground connections compact, and route the outputs as controlled-impedance transmission lines to prevent reflections from reducing usable timing margin.
تجویز کردہ
Parallel Converter and Retimer Clock Fanout
Parallel data converters and retimers often require several synchronized clock outputs but cannot be driven reliably from one source pin. The SY89854UMI provides a 1:4 distribution function, giving each destination a separately routed LVPECL clock that can be impedance-controlled to its local receiver. Supporting CML, LVDS, and PECL inputs also simplifies interface design when the master clock originates in a different logic domain. The part is appropriate for high-speed test boards, communications equipment, and data-conversion subsystems where clock isolation and repeatable edge quality are more important than minimum component count.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا SY89854UMI — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | SY89855UMI | SY89856UMI | SY89857UMI | SY89854UMG-TR | SY89872UMG |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF |
| Device Type | Clock fanout buffer and translator | Clock fanout buffer and translator | Clock fanout buffer and translator | Clock fanout buffer and translator | SY89854 series clock buffer | Precision Edge clock buffer |
| Maximum Frequency | 3.5 GHz | 3.5 GHz class | 3.5 GHz class | 3.5 GHz class | 3.5 GHz | 3.5 GHz class |
| Product Series | Precision Edge | Precision Edge | Precision Edge | Precision Edge | SY89854 | Precision Edge |
| Ordering Format | SY89854UMI | UMI | UMI | UMI | UMG-TR | UMG |
اہم امتیازی خصوصیات
- Integrated four-way distribution and multi-standard logic translation (بمقابلہSY89855UMI)
- High-speed 3.5 GHz maximum operating frequency (بمقابلہSY89872UMG)
- Compact exposed-pad clock-distribution footprint (بمقابلہSY89854UMG-TR)
ڈیزائن نوٹس
Treat every SY89854UMI clock connection as a controlled-impedance transmission line at frequencies where the edge rate approaches 3.5 GHz. Route each of the four outputs directly to its intended receiver, avoid long stubs, and minimize layer transitions and via count. Place the device near the clock source when possible, and use the manufacturer's recommended termination topology so output reflections and edge distortion do not reduce receiver timing margin.
Follow the Microchip 16-VFQFN land pattern and thermal-via arrangement rather than substituting a generic QFN footprint. The exposed pad is part of the device's heat path and should be connected to the PCB ground or supply plane as directed by the datasheet. Place input, output, and supply-bypass capacitors adjacent to their associated pins, and keep the supply and ground connections short to minimize inductive voltage excursions during high-frequency clock edges.
Do not select a related family member from the package name alone. The SY89855UMI, SY89856UMI, and SY89857UMI differ in fanout ratio or input-output configuration, so an incorrect selection can leave clock pins unconnected or apply the wrong input termination. Compare the complete pin-description table, logic-level requirements, enable behavior, and recommended application circuit before assigning any alternative as a drop-in substitution.
Clock distribution edges can radiate if output branches are unnecessarily long or improperly terminated. Keep clock traces away from switching power-conversion nodes, keep return paths continuous beneath the signal layer, and avoid routing outputs near sensitive analog inputs. If radiated emissions become an issue, first verify termination values, impedance, branch length, and connector or cable loading before adding filtering that could degrade the clock edge.
تعمیل کی معلومات
Compliance status is not stated on the available product listings. Confirm RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals declarations with Microchip using the exact orderable part number.