SY89854UMI - 1:4 3.5 GHz Clock Buffer | Microchip | LVPECL
MPN: SY89854UMI ✓ 啟用中SY89854UMI 概覽
A clock fanout buffer is a clock-and-timing integrated circuit that distributes one incoming clock signal to multiple synchronized outputs. Clock-and-timing ICs sit above comparators and oscillators in the signal-chain hierarchy, preserving edge timing while isolating source and destination circuits from loading. A logic translator within the same device converts CML, LVDS, or PECL input levels into LVPECL outputs, simplifying interfaces between mixed logic families.
The principal performance characteristics are a 1:4 fanout ratio, a 3.5 GHz maximum frequency, CML/LVDS/PECL input support, and LVPECL output signaling. The 16-VFQFN exposed-pad package also provides a thermal path for removing internally generated heat, although exact power dissipation and junction-temperature limits must be confirmed against the manufacturer datasheet before a design is released.
The SY89854UMI is intended for systems in which one source must drive four receivers without degrading edge quality or amplitude. Typical circuit positions include the transmit-side output of a serial transceiver, the fanout stage of a backplane clocking tree, and the distribution point feeding parallel converters, retimers, or high-speed logic. Its multi-input translation capability allows the same distributor to operate across several source signaling conventions.
Use short, impedance-controlled connections between the device and its clock source, and follow the reference-layout and bypass recommendations in the manufacturer datasheet. Decoupling capacitors should be placed directly beside the supply pins, while output traces should avoid stubs, excessive vias, and uncontrolled branch lengths that could degrade the 3.5 GHz edge rate.
This page combines device specifications, application guidance, package details, and related Precision Edge family options for faster component evaluation. Verify the complete pin description, input-output truth table, supply limits, and recommended termination network against the current Microchip documentation before layout release.
直接替換替代品,適用於 SY89854UMI — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SY89854UMI (相同外形與佔位) — 差異在於 Fanout Ratio, Output Logic.
SY89855UMI
✅ 直接替換📋 參考替代品(不在目錄中)
SY89856UMI
✅ 直接替換📋 參考替代品(不在目錄中)
SY89857UMI
✅ 直接替換📋 參考替代品(不在目錄中)
SY89854UMG-TR
✅ 直接替換📋 參考替代品(不在目錄中)
SY89872UMG
✅ 直接替換聯絡詢價
查看資料表 →SY89854UMI 規格
| Device Type | Clock fanout buffer and logic translator |
| Fanout Ratio | 1:4 |
| Maximum Frequency | 3.5 GHz |
| Supported Inputs | CML, LVDS, PECL |
| Output Logic | LVPECL |
| 輸出數量 | 4 outputs |
| 封裝 | 16-VFQFN Exposed Pad, 16-MLF |
| 安裝類型 | Surface mount |
| Product Series | Precision Edge |
SY89854UMI 16-vfqfn exposed pad, 16-mlf 腳位配置指南
SY89854UMI(16-vfqfn exposed pad, 16-mlf 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SY89854UMI.
請參閱 資料表 以查看完整腳位配置。
典型應用
SY89854UMI 適用於 6 應用s: Telecommunications Backplane Clock Distribution, SerDes Transceiver Clock Fanout, Data-Center Switch Clock Tree, High-Speed Test and Measurement Equipment, Optical Module Interface Clocking, Parallel Converter and Retimer Clock Fanout.
Telecommunications Backplane Clock Distribution
The SY89854UMI fits a backplane distribution point where one recovered reference clock must feed four high-speed line-card circuits. Its 1:4 fanout provides separate output paths, while CML, LVDS, or PECL input support allows operation beside transceivers using different logic conventions. The LVPECL outputs support receiver interfaces commonly found in telecommunications equipment. Routing the four outputs as short, controlled-impedance branches helps preserve edge quality at rates approaching the device's 3.5 GHz maximum. Designers should apply the recommended termination and reference layout, then verify eye margin and jitter in the assembled board.
推薦
SerDes Transceiver Clock Fanout
A common clock fanout stage sits between a transceiver's recovered clock output and several parallel converters or retimers. The SY89854UMI provides four outputs from one source and can translate CML, LVDS, or PECL into LVPECL, reducing the need for separate level translators. Its 3.5 GHz maximum frequency supports demanding serial links while the compact 16-VFQFN package keeps the clock-distribution block close to the high-speed devices. Place the buffer near the source, keep output branch lengths controlled, and avoid routing clock signals beneath noisy switching stages.
推薦
Data-Center Switch Clock Tree
The SY89854UMI can distribute a common 3.5 GHz-class reference clock to four switching or interface blocks within a data-center design. Its 1:4 organization suits systems that need multiple receiver-ready clocks while limiting fanout on the upstream source. CML, LVDS, and PECL input options allow the part to sit after several kinds of clock-generation or recovery blocks, and the LVPECL outputs provide a consistent downstream interface. For best results, maintain continuous reference planes, use the manufacturer's recommended supply bypass arrangement, and test each branch for jitter and amplitude margin under worst-case loading.
推薦
High-Speed Test and Measurement Equipment
Instrumentation front ends often need one precision timing reference distributed to several acquisition or processing channels. The SY89854UMI provides four LVPECL outputs from a single input and supports CML, LVDS, or PECL sources at up to 3.5 GHz, making it suitable for high-speed sampling systems and automated test equipment. Separate outputs help isolate channel loading and reduce the sensitivity of the master clock to one downstream device. Keep traces short, terminate each output according to the recommended circuit, and account for probe or cable loading when evaluating timing accuracy.
推薦
Optical Module Interface Clocking
Optical and network modules frequently combine several high-speed lanes with a distributed reference clock. The SY89854UMI can translate a CML, LVDS, or PECL reference into four LVPECL clock outputs, allowing a common timing source to feed parallel converters or retimers. Its 3.5 GHz maximum operating frequency supports high-bandwidth module architectures while the 16-VFQFN footprint conserves limited board area. Place the device close to the clock source, keep supply and ground connections compact, and route the outputs as controlled-impedance transmission lines to prevent reflections from reducing usable timing margin.
推薦
Parallel Converter and Retimer Clock Fanout
Parallel data converters and retimers often require several synchronized clock outputs but cannot be driven reliably from one source pin. The SY89854UMI provides a 1:4 distribution function, giving each destination a separately routed LVPECL clock that can be impedance-controlled to its local receiver. Supporting CML, LVDS, and PECL inputs also simplifies interface design when the master clock originates in a different logic domain. The part is appropriate for high-speed test boards, communications equipment, and data-conversion subsystems where clock isolation and repeatable edge quality are more important than minimum component count.
推薦
推薦產品摘要
工程參考資料,適用於 SY89854UMI — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SY89855UMI | SY89856UMI | SY89857UMI | SY89854UMG-TR | SY89872UMG |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF |
| Device Type | Clock fanout buffer and translator | Clock fanout buffer and translator | Clock fanout buffer and translator | Clock fanout buffer and translator | SY89854 series clock buffer | Precision Edge clock buffer |
| Maximum Frequency | 3.5 GHz | 3.5 GHz class | 3.5 GHz class | 3.5 GHz class | 3.5 GHz | 3.5 GHz class |
| Product Series | Precision Edge | Precision Edge | Precision Edge | Precision Edge | SY89854 | Precision Edge |
| Ordering Format | SY89854UMI | UMI | UMI | UMI | UMG-TR | UMG |
主要差異化特點
- Integrated four-way distribution and multi-standard logic translation (對比SY89855UMI)
- High-speed 3.5 GHz maximum operating frequency (對比SY89872UMG)
- Compact exposed-pad clock-distribution footprint (對比SY89854UMG-TR)
設計說明
Treat every SY89854UMI clock connection as a controlled-impedance transmission line at frequencies where the edge rate approaches 3.5 GHz. Route each of the four outputs directly to its intended receiver, avoid long stubs, and minimize layer transitions and via count. Place the device near the clock source when possible, and use the manufacturer's recommended termination topology so output reflections and edge distortion do not reduce receiver timing margin.
Follow the Microchip 16-VFQFN land pattern and thermal-via arrangement rather than substituting a generic QFN footprint. The exposed pad is part of the device's heat path and should be connected to the PCB ground or supply plane as directed by the datasheet. Place input, output, and supply-bypass capacitors adjacent to their associated pins, and keep the supply and ground connections short to minimize inductive voltage excursions during high-frequency clock edges.
Do not select a related family member from the package name alone. The SY89855UMI, SY89856UMI, and SY89857UMI differ in fanout ratio or input-output configuration, so an incorrect selection can leave clock pins unconnected or apply the wrong input termination. Compare the complete pin-description table, logic-level requirements, enable behavior, and recommended application circuit before assigning any alternative as a drop-in substitution.
Clock distribution edges can radiate if output branches are unnecessarily long or improperly terminated. Keep clock traces away from switching power-conversion nodes, keep return paths continuous beneath the signal layer, and avoid routing outputs near sensitive analog inputs. If radiated emissions become an issue, first verify termination values, impedance, branch length, and connector or cable loading before adding filtering that could degrade the clock edge.
合規資訊
Compliance status is not stated on the available product listings. Confirm RoHS, REACH, lead-free, halogen-free, AEC-Q100, and conflict-minerals declarations with Microchip using the exact orderable part number.