Microchip Technology

SY89854UMY - 1:4 3.5 GHz Clock Fanout Buffer | Microchip

MPN: SY89854UMY ✓ فعال
2.375 V to 3.6 V Vdss CML, LVDS, and PECL differential inputs Rds(on) 16-VFQFN exposed pad, 16-MLF Package 3.5 GHz Speed
MOQ: 1 |

SY89854UMY جائزہ

The Microchip Technology SY89854UMY is a 1:4 clock fanout buffer and translator with a maximum operating frequency of 3.5 GHz, housed in a 16-VFQFN exposed-pad package identified as 16-MLF. The device accepts differential CML, LVDS, or PECL inputs and translates them into LVPECL outputs. Its stated supply-voltage range is 2.375 V to 3.6 V.

A clock fanout buffer is a clock-and-timing IC that receives one differential clock and reproduces it across multiple outputs. Clock buffer and translator ICs form part of the broader clock and timing hierarchy, where they support signal distribution, logic-level conversion, clock isolation, and reliable propagation across a system. Their purpose is to preserve clock timing and signal integrity when multiple downstream circuits require a synchronized reference.

The SY89854UMY provides four LVPECL outputs from one differential input pair. This 1:4 distribution ratio makes the device suitable for systems that need one source clock to feed several timing-critical sections. Its 3.5 GHz maximum frequency supports high-speed digital infrastructure, while the selectable CML, LVDS, or PECL input formats allow the device to operate near compatible upstream clock sources.

The operating supply range of 2.375 V to 3.6 V is suitable for systems that operate near the 3.3 V rail. The translated LVPECL output interface provides a consistent output format across the four fanout channels. The 16-VFQFN exposed-pad package supports a compact surface-mount layout, with its exposed thermal pad intended for connection to the PCB thermal and ground system.

Typical uses include high-speed backplane clock distribution, telecommunications equipment, server networking hardware, FPGA or ASIC clock distribution, and test-and-measurement systems. The part is particularly relevant when an incoming differential clock must be translated and fanned out to multiple high-speed destinations without introducing an additional conversion stage in the clock path.

PCB design should preserve short, controlled clock routes and provide a low-impedance return path for each differential pair. Place input and output branch structures according to the pin-assignment table in the manufacturer datasheet, terminate transmission lines in accordance with the implemented logic standard, and connect the exposed pad to the required ground plane. The maximum 3.6 V supply limit must be respected during power-supply tolerance checks.

This page consolidates the device identity, operating ranges, logic standards, package information, sourcing guidance, and design considerations into a focused engineering reference. It also distinguishes confirmed device attributes from specifications that require confirmation from the manufacturer datasheet before a new PCB or qualification program is released.

کے لیے ڈراپ اِن متبادل SY89854UMY — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

SY89854UMG

✅ ڈراپ-اِن
📦 QFN-16
Same Microchip SY89854 family and QFN-16 format; exact frequency, supply, and pin-level differences require manufacturer confirmation, with up to 20% estimated parametric variance.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

SY89854UMY تفصیلات

Product Type Clock Fanout Buffer and Translator IC
Device Series Precision Edge
Fanout Ratio 1:4
آؤٹ پٹس کی تعداد 4 outputs
Maximum Frequency 3.5 GHz
Input Logic Standards CML, LVDS, and PECL differential inputs
Output Logic Standard LVPECL
Operating Supply Voltage Range 2.375 V to 3.6 V
پیکیج 16-VFQFN exposed pad, 16-MLF
ماؤنٹنگ ٹائپ Surface Mount
Circuit Count 1 circuit
Input Configuration Differential
آؤٹ پٹ کنفیگریشن 4 differential LVPECL outputs
Maximum Supply Voltage 3.6 V

SY89854UMY 16-vfqfn exposed pad, 16-mlf پن کنفیگریشن گائیڈ

SY89854UMY (16-vfqfn exposed pad, 16-mlf پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

SY89854UMY کے لیے 16-vfqfn exposed pad, 16-mlf پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SY89854UMY.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

SY89854UMY کے لیے موزوں ہے 6 ایپلیکیشنs: High-Speed Backplane Clock Distribution, FPGA and ASIC Clock Trees, Telecommunications Equipment, Server and Networking Hardware, Test and Measurement Instruments, High-Speed Industrial Control Systems.

🌐

High-Speed Backplane Clock Distribution

The SY89854UMY fits backplane systems that must distribute one source clock across several high-speed destinations. Its 1:4 fanout ratio provides four LVPECL branches, while differential CML, LVDS, or PECL input support allows compatibility with multiple clock-source formats. The 3.5 GHz maximum frequency addresses demanding serial and parallel processing systems, and the 2.375 V to 3.6 V operating range fits 3.3 V-class rails. Engineers should preserve controlled differential routing and verify branch loading, termination, insertion loss, and jitter margin against the manufacturer timing information.

🖥️

FPGA and ASIC Clock Trees

The SY89854UMY can feed a multi-load FPGA or ASIC clock tree when four matched LVPECL branches are required. A differential input can arrive as CML, LVDS, or PECL and is translated to LVPECL, eliminating separate format-conversion blocks for each destination. Its 3.5 GHz maximum frequency supports high-performance digital logic, while the compact 16-VFQFN exposed-pad package preserves routing space. Before release, check the target clock topology, per-output loading, power-supply tolerance, thermal performance, and the pin-assignment table in the manufacturer datasheet.

📡

Telecommunications Equipment

The SY89854UMY is appropriate for telecommunications equipment requiring a compact clock translator and fanout stage. Four differential LVPECL outputs allow a single translated reference to reach multiple line-card or signal-processing sections, while CML, LVDS, and PECL input support improves compatibility with heterogeneous clock sources. The 3.5 GHz maximum frequency supports high-rate transport architectures, and the 2.375 V to 3.6 V supply range suits 3.3 V equipment. Confirm timing margin, jitter performance, return loss, and termination arrangements using the application constraints of each deployed interface.

🖥️

Server and Networking Hardware

The SY89854UMY supports server and networking hardware that distributes a high-speed differential clock to several processing or interface domains. Its 1:4 architecture reduces the number of separate translation stages required when four LVPECL loads must be driven. Differential input options including CML, LVDS, and PECL provide design flexibility, and operation up to 3.5 GHz accommodates demanding clock domains. Use short, symmetrically routed branches, provide the required return path, and verify connector or package transition losses so that the complete clock link remains within budget.

🔧

Test and Measurement Instruments

The SY89854UMY can serve as a clock fanout and level translator inside high-speed test and measurement equipment. A differential source may be supplied in CML, LVDS, or PECL form and distributed as four LVPECL outputs to acquisition, conversion, or synchronization circuits. The 3.5 GHz maximum frequency provides margin for high-speed test paths, while the compact 16-VFQFN package supports dense instrument electronics. Designers should account for measurement loading, connector reflections, skew between outputs, and the specific jitter contribution permitted by the manufacturer characterization.

🏭

High-Speed Industrial Control Systems

The SY89854UMY can distribute synchronized clock references in high-speed industrial control and inspection systems where several digital subsystems must operate from one differential source. Its four LVPECL outputs support parallel clock branches, and CML, LVDS, or PECL input compatibility makes it useful across mixed-signal subsystems. The 3.5 GHz maximum frequency covers high-speed digital processing, while the 2.375 V to 3.6 V range integrates with 3.3 V power systems. Validate industrial temperature limits, isolation boundaries, grounding, and electromagnetic-compatibility requirements before production deployment.

What is the SY89854UMY clock fanout buffer used for?
The SY89854UMY distributes one differential clock input to four LVPECL outputs for high-speed systems requiring multiple synchronized clock destinations. According to the Microchip product information, the device accepts CML, LVDS, or PECL inputs, translates them to LVPECL, and supports frequencies up to 3.5 GHz. It is useful in backplanes, communications equipment, FPGA clock trees, and other multi-branch clock architectures where one source must feed several loads.
What are the key specifications of SY89854UMY?
The SY89854UMY is a 1:4 clock fanout and translator IC with a maximum frequency of 3.5 GHz and four LVPECL outputs. According to the Microchip product information, it accepts differential CML, LVDS, or PECL inputs, operates from 2.375 V to 3.6 V, and is supplied in a 16-VFQFN exposed-pad package identified as 16-MLF. These attributes define it as a high-speed, multi-output clock distribution device.
What logic levels does SY89854UMY support?
The SY89854UMY accepts differential CML, LVDS, and PECL clock inputs and provides four LVPECL outputs. According to the Microchip product information, this translation function allows one clock source to drive LVPECL-based destinations without placing a separate level-conversion stage in each branch. The 2.375 V to 3.6 V operating supply range places the device near systems built around a 3.3 V power rail.
What is the maximum operating frequency of SY89854UMY?
The SY89854UMY supports clock frequencies up to 3.5 GHz. According to the Microchip product listing, the part is a 1:4 clock fanout buffer and translator with differential CML, LVDS, or PECL inputs and LVPECL outputs. The 3.5 GHz ceiling makes it relevant to high-speed communication links, parallel processing systems, and FPGA or ASIC clock-distribution networks.
Which package does SY89854UMY use?
The SY89854UMY uses a 16-VFQFN exposed-pad package identified by Microchip as 16-MLF. According to the manufacturer product information, the device is intended for surface-mount assembly and includes an exposed pad on the underside of the package. Confirm the physical land pattern, exposed-pad dimensions, and pad connection requirements in the manufacturer datasheet before laying out the PCB.
Where can I download the SY89854UMY datasheet PDF?
The SY89854UMY datasheet and technical resources are accessible through the Microchip product documentation and the component links on this page. Use the manufacturer datasheet to confirm the complete pin-assignment table, differential-routing requirements, input termination, output termination, exposed-pad connection, recommended decoupling, and absolute maximum ratings. The documented product description identifies a 1:4 architecture, 3.5 GHz maximum frequency, and 2.375 V to 3.6 V operating range.
Where can I find the SY89854UMY pinout?
The SY89854UMY pinout is presented in the manufacturer datasheet under the package and pin-description information for the 16-VFQFN exposed-pad, 16-MLF package. Use that table when assigning the differential input, four differential output pairs, supply pins, ground connections, and exposed pad. The package drawing is also needed to confirm the orientation of pin 1 and the recommended land pattern.
Can SY89854UMY be used as a 1:4 clock distributor?
Yes, the SY89854UMY is specifically configured as a 1:4 clock fanout device. According to the Microchip product information, one differential input is translated into four LVPECL outputs, with maximum operating frequency of 3.5 GHz. It is well suited to clock trees where multiple high-speed loads require a common source and consistent output logic level.
What is the difference between SY89854UMY and SY89854UMI TR?
The SY89854UMY and SY89854UMI TR are identified as the same 1:4, 3.5 GHz, 16-VFQFN clock-buffer device, while their documented ordering distinction is packaging. The cross-reference comparison identifies SY89854UMI TR as Tape and Reel and SY89854UMY as Bulk. Because this is a packing-code variation rather than a distinct engineering alternative, the SY89854UMI TR should not be used to justify a redesign or treated as a different clock architecture.
What is the best drop-in replacement for SY89854UMY?
A valid drop-in replacement must preserve the 16-VFQFN pin assignment, differential input support, LVPECL output interface, 1:4 fanout ratio, 3.5 GHz maximum frequency, and 2.375 V to 3.6 V operating range. The available cross-reference material confirms SY89854UMI TR as the same device supplied in Tape and Reel packaging. It identifies no distinct pin-compatible substitute, so no additional drop-in part should be selected without a manufacturer pin-for-pin comparison.
What can replace SY89854UMY on an existing PCB?
SY89854UMI TR can replace SY89854UMY electrically when the required orderable configuration is Tape and Reel, because the documented difference is packaging rather than clock functionality. Both are described as 1:4, 3.5 GHz, 16-VFQFN exposed-pad devices. For any other candidate, require a manufacturer-documented pin-for-pin comparison covering input logic levels, output logic levels, supply range, timing, and exposed-pad connections before substitution.
Is there a verified cross-brand equivalent for SY89854UMY?
No verified cross-brand drop-in equivalent is identified for the SY89854UMY in the available cross-reference material. A valid replacement must use the same 16-VFQFN footprint and preserve differential CML, LVDS, or PECL input compatibility, four LVPECL outputs, the 1:4 fanout ratio, operation to 3.5 GHz, and the 2.375 V to 3.6 V supply range. Use Microchip's cross-reference search to request a comparison for a specific competitor MPN.
When should I choose SY89854UMY over another clock buffer?
Choose the SY89854UMY when the design needs one differential clock distributed to four LVPECL outputs at frequencies up to 3.5 GHz. According to the Microchip product information, CML, LVDS, and PECL inputs broaden its source compatibility, while the 2.375 V to 3.6 V supply range supports compact high-speed systems. Select another device only when its pinout, logic levels, timing, and package satisfy the complete interface requirements.
Is SY89854UMY suitable for FPGA and ASIC clock distribution?
The SY89854UMY is suitable for FPGA or ASIC clock trees when four LVPECL branches, differential input flexibility, and a 3.5 GHz maximum frequency fit the design. According to the Microchip product information, the device translates CML, LVDS, or PECL inputs into LVPECL. The actual operating point must remain within the device timing, jitter, supply, and loading limits published in the manufacturer datasheet.
Where can I buy SY89854UMY and request current lead time?
The SY89854UMY can be requested through the Request a Quote form on this page. The form is the appropriate channel for current commercial availability, lead time, and order quantities because distribution status changes over time. The manufacturer product information identifies SY89854UMY as a 1:4, 3.5 GHz clock fanout and translator in a 16-VFQFN exposed-pad package operating from 2.375 V to 3.6 V.
What is the current price and stock status of SY89854UMY?
Request the current price, stock position, and lead time for SY89854UMY through the Request a Quote form on this page. Commercial figures are not embedded in the technical description because they can change independently of the device specification. For technical qualification, the confirmed product attributes are its 1:4 fanout, 3.5 GHz maximum frequency, LVPECL outputs, and 2.375 V to 3.6 V operating supply range.

کے لیے انجینئرنگ ریفرنس ڈیٹا SY89854UMY — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the SY89854UMY when the clock architecture requires one differential input to feed four LVPECL destinations at frequencies up to 3.5 GHz. It is especially useful when the upstream source can be CML, LVDS, or PECL and an integrated translation stage avoids separate converters. The 16-VFQFN exposed-pad package and 2.375 V to 3.6 V supply range suit compact systems operating around a 3.3 V rail. SY89854UMI TR may satisfy the same electrical order when tape-and-reel handling is required, but it is a packing configuration rather than a distinct drop-in engineering choice. Do not select an unspecified cross-brand substitute unless its manufacturer confirms the same 16-pad assignment, differential input thresholds, LVPECL output levels, timing behavior, supply range, and exposed-pad connection. If the design requires more than four outputs, lower voltage levels, or a different package, use a purpose-specific multi-output clock buffer instead.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Package 16-VFQFN exposed pad, 16-MLF
Brand Microchip Technology
Product Type Clock Fanout Buffer and Translator IC
Fanout Ratio 1:4
Maximum Frequency 3.5 GHz
Input Logic Standards CML, LVDS, and PECL differential inputs
Output Logic Standard LVPECL
Operating Supply Voltage Range 2.375 V to 3.6 V

اہم امتیازی خصوصیات

  • Four differential LVPECL outputs from one input (بمقابلہSingle-output clock-driver families)
  • Three differential input-format options (بمقابلہInput-format-specific clock translators)
  • High-speed operation in a compact exposed-pad package (بمقابلہLower-frequency general-purpose clock buffers)
  • Compatibility with 3.3 V-class supply designs (بمقابلہClock translators requiring a higher fixed supply)

ڈیزائن نوٹس

Treat the differential input and all four LVPECL output pairs as controlled-impedance nets. Use the pin-assignment and recommended-layout sections in the manufacturer datasheet to determine the package-side escape geometry and branch topology. Keep each differential pair over a continuous reference plane, minimize stub length, and avoid routing the clock across plane splits. Incorrect return paths can negate the benefit of the differential interface even when frequency and logic-level specifications are satisfied.

Design the supply rail to remain inside the documented 2.375 V to 3.6 V operating range, including transient tolerance and startup overshoot. Place local decoupling close to the supply and ground pins using the capacitance and placement specified by the manufacturer datasheet. Because the 16-VFQFN includes an exposed pad, verify its required PCB connection and copper area to provide both electrical grounding and thermal spreading.

Confirm output loading, termination, trace loss, and receiver thresholds for every LVPECL branch before treating all four outputs as equivalent usable destinations. Differential inputs arrive as CML, LVDS, or PECL, so the source amplitude, common-mode voltage, termination method, and edge rate must match the selected logic mode. Validate the complete source-to-receiver path with the target clock frequency and loading rather than relying only on the device's 3.5 GHz maximum rating.

Use the exposed pad as an intentional thermal and ground structure rather than treating it as an optional copper feature. Follow the manufacturer's land-pattern guidance for pad geometry, solder-mask definition, and thermal-via arrangement. When the device operates continuously near 3.5 GHz with high-output loading, evaluate the device temperature and adjacent supply components under the enclosure's worst-case ambient conditions before reducing clock activity or adding thermal spreading.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available manufacturer and distributor information identifies the part, package, logic standards, frequency, and supply range but does not state compliance status. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations with Microchip before procurement or qualification.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

SY89854UMY datasheet SY89854UMY pinout SY89854UMY datasheet pdf SY89854UMY equivalent SY89854UMY replacement SY89854UMY footprint SY89854UMY price SY89854UMY stock Microchip SY89854UMY SY89854 16-VFQFN clock buffer SY89854 LVPECL fanout SY89854 FPGA clock distribution

متعلقہ اجزاء اور اصطلاحات

Microchip Technology SY89854UMY SY89854UMI TR SY89854 Precision Edge clock fanout buffer clock translator clock and timing IC clock distribution 1:4 fanout differential clock CML LVDS PECL LVPECL 3.5 GHz 2.375 V to 3.6 V operating range 16-VFQFN 16-MLF exposed pad FPGA ASIC backplane differential routing
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں