SY89854UMY - 1:4 3.5 GHz Clock Fanout Buffer | Microchip
부품 번호: SY89854UMY ✓ 활성SY89854UMY 개요
A clock fanout buffer is a clock-and-timing IC that receives one differential clock and reproduces it across multiple outputs. Clock buffer and translator ICs form part of the broader clock and timing hierarchy, where they support signal distribution, logic-level conversion, clock isolation, and reliable propagation across a system. Their purpose is to preserve clock timing and signal integrity when multiple downstream circuits require a synchronized reference.
The SY89854UMY provides four LVPECL outputs from one differential input pair. This 1:4 distribution ratio makes the device suitable for systems that need one source clock to feed several timing-critical sections. Its 3.5 GHz maximum frequency supports high-speed digital infrastructure, while the selectable CML, LVDS, or PECL input formats allow the device to operate near compatible upstream clock sources.
The operating supply range of 2.375 V to 3.6 V is suitable for systems that operate near the 3.3 V rail. The translated LVPECL output interface provides a consistent output format across the four fanout channels. The 16-VFQFN exposed-pad package supports a compact surface-mount layout, with its exposed thermal pad intended for connection to the PCB thermal and ground system.
Typical uses include high-speed backplane clock distribution, telecommunications equipment, server networking hardware, FPGA or ASIC clock distribution, and test-and-measurement systems. The part is particularly relevant when an incoming differential clock must be translated and fanned out to multiple high-speed destinations without introducing an additional conversion stage in the clock path.
PCB design should preserve short, controlled clock routes and provide a low-impedance return path for each differential pair. Place input and output branch structures according to the pin-assignment table in the manufacturer datasheet, terminate transmission lines in accordance with the implemented logic standard, and connect the exposed pad to the required ground plane. The maximum 3.6 V supply limit must be respected during power-supply tolerance checks.
This page consolidates the device identity, operating ranges, logic standards, package information, sourcing guidance, and design considerations into a focused engineering reference. It also distinguishes confirmed device attributes from specifications that require confirmation from the manufacturer datasheet before a new PCB or qualification program is released.
드롭인 대체품: SY89854UMY — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
SY89854UMG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SY89854UMY 사양
| Product Type | Clock Fanout Buffer and Translator IC |
| Device Series | Precision Edge |
| Fanout Ratio | 1:4 |
| 출력 수 | 4 outputs |
| Maximum Frequency | 3.5 GHz |
| Input Logic Standards | CML, LVDS, and PECL differential inputs |
| Output Logic Standard | LVPECL |
| Operating Supply Voltage Range | 2.375 V to 3.6 V |
| 패키지 | 16-VFQFN exposed pad, 16-MLF |
| 실장 유형 | Surface Mount |
| Circuit Count | 1 circuit |
| Input Configuration | Differential |
| 출력 구성 | 4 differential LVPECL outputs |
| Maximum Supply Voltage | 3.6 V |
SY89854UMY 16-vfqfn exposed pad, 16-mlf 핀 구성 가이드
SY89854UMY(16-vfqfn exposed pad, 16-mlf 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: SY89854UMY.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
SY89854UMY 적합 용도: 6 애플리케이션s: High-Speed Backplane Clock Distribution, FPGA and ASIC Clock Trees, Telecommunications Equipment, Server and Networking Hardware, Test and Measurement Instruments, High-Speed Industrial Control Systems.
High-Speed Backplane Clock Distribution
The SY89854UMY fits backplane systems that must distribute one source clock across several high-speed destinations. Its 1:4 fanout ratio provides four LVPECL branches, while differential CML, LVDS, or PECL input support allows compatibility with multiple clock-source formats. The 3.5 GHz maximum frequency addresses demanding serial and parallel processing systems, and the 2.375 V to 3.6 V operating range fits 3.3 V-class rails. Engineers should preserve controlled differential routing and verify branch loading, termination, insertion loss, and jitter margin against the manufacturer timing information.
FPGA and ASIC Clock Trees
The SY89854UMY can feed a multi-load FPGA or ASIC clock tree when four matched LVPECL branches are required. A differential input can arrive as CML, LVDS, or PECL and is translated to LVPECL, eliminating separate format-conversion blocks for each destination. Its 3.5 GHz maximum frequency supports high-performance digital logic, while the compact 16-VFQFN exposed-pad package preserves routing space. Before release, check the target clock topology, per-output loading, power-supply tolerance, thermal performance, and the pin-assignment table in the manufacturer datasheet.
Telecommunications Equipment
The SY89854UMY is appropriate for telecommunications equipment requiring a compact clock translator and fanout stage. Four differential LVPECL outputs allow a single translated reference to reach multiple line-card or signal-processing sections, while CML, LVDS, and PECL input support improves compatibility with heterogeneous clock sources. The 3.5 GHz maximum frequency supports high-rate transport architectures, and the 2.375 V to 3.6 V supply range suits 3.3 V equipment. Confirm timing margin, jitter performance, return loss, and termination arrangements using the application constraints of each deployed interface.
Server and Networking Hardware
The SY89854UMY supports server and networking hardware that distributes a high-speed differential clock to several processing or interface domains. Its 1:4 architecture reduces the number of separate translation stages required when four LVPECL loads must be driven. Differential input options including CML, LVDS, and PECL provide design flexibility, and operation up to 3.5 GHz accommodates demanding clock domains. Use short, symmetrically routed branches, provide the required return path, and verify connector or package transition losses so that the complete clock link remains within budget.
Test and Measurement Instruments
The SY89854UMY can serve as a clock fanout and level translator inside high-speed test and measurement equipment. A differential source may be supplied in CML, LVDS, or PECL form and distributed as four LVPECL outputs to acquisition, conversion, or synchronization circuits. The 3.5 GHz maximum frequency provides margin for high-speed test paths, while the compact 16-VFQFN package supports dense instrument electronics. Designers should account for measurement loading, connector reflections, skew between outputs, and the specific jitter contribution permitted by the manufacturer characterization.
High-Speed Industrial Control Systems
The SY89854UMY can distribute synchronized clock references in high-speed industrial control and inspection systems where several digital subsystems must operate from one differential source. Its four LVPECL outputs support parallel clock branches, and CML, LVDS, or PECL input compatibility makes it useful across mixed-signal subsystems. The 3.5 GHz maximum frequency covers high-speed digital processing, while the 2.375 V to 3.6 V range integrates with 3.3 V power systems. Validate industrial temperature limits, isolation boundaries, grounding, and electromagnetic-compatibility requirements before production deployment.
엔지니어링 참조 데이터: SY89854UMY — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 16-VFQFN exposed pad, 16-MLF |
| Brand | Microchip Technology |
| Product Type | Clock Fanout Buffer and Translator IC |
| Fanout Ratio | 1:4 |
| Maximum Frequency | 3.5 GHz |
| Input Logic Standards | CML, LVDS, and PECL differential inputs |
| Output Logic Standard | LVPECL |
| Operating Supply Voltage Range | 2.375 V to 3.6 V |
주요 차별점
- Four differential LVPECL outputs from one input (vs Single-output clock-driver families)
- Three differential input-format options (vs Input-format-specific clock translators)
- High-speed operation in a compact exposed-pad package (vs Lower-frequency general-purpose clock buffers)
- Compatibility with 3.3 V-class supply designs (vs Clock translators requiring a higher fixed supply)
설계 노트
Treat the differential input and all four LVPECL output pairs as controlled-impedance nets. Use the pin-assignment and recommended-layout sections in the manufacturer datasheet to determine the package-side escape geometry and branch topology. Keep each differential pair over a continuous reference plane, minimize stub length, and avoid routing the clock across plane splits. Incorrect return paths can negate the benefit of the differential interface even when frequency and logic-level specifications are satisfied.
Design the supply rail to remain inside the documented 2.375 V to 3.6 V operating range, including transient tolerance and startup overshoot. Place local decoupling close to the supply and ground pins using the capacitance and placement specified by the manufacturer datasheet. Because the 16-VFQFN includes an exposed pad, verify its required PCB connection and copper area to provide both electrical grounding and thermal spreading.
Confirm output loading, termination, trace loss, and receiver thresholds for every LVPECL branch before treating all four outputs as equivalent usable destinations. Differential inputs arrive as CML, LVDS, or PECL, so the source amplitude, common-mode voltage, termination method, and edge rate must match the selected logic mode. Validate the complete source-to-receiver path with the target clock frequency and loading rather than relying only on the device's 3.5 GHz maximum rating.
Use the exposed pad as an intentional thermal and ground structure rather than treating it as an optional copper feature. Follow the manufacturer's land-pattern guidance for pad geometry, solder-mask definition, and thermal-via arrangement. When the device operates continuously near 3.5 GHz with high-output loading, evaluate the device temperature and adjacent supply components under the enclosure's worst-case ambient conditions before reducing clock activity or adding thermal spreading.
규정 준수 정보
The available manufacturer and distributor information identifies the part, package, logic standards, frequency, and supply range but does not state compliance status. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations with Microchip before procurement or qualification.