TAS5186ADDV - 210W 6-Channel Class-D Amplifier | TI
MPN: TAS5186ADDV ✓ فعالTAS5186ADDV جائزہ
A Class-D digital power stage is an audio amplifier that uses pulse-width modulation to drive a switching output stage. Unlike a conventional linear audio amplifier, a Class-D stage can convert more of its input power into output power, reducing the amount of heat that must be removed from the amplifier assembly. The TAS5186A family integrates six output channels for compact multichannel audio systems.
The TAS5186ADDV supports up to 210 W of total amplifier power, is characterized as a six-channel 30-W device, and can drive a 3-ohm load. Texas Instruments describes the power stage as capable of driving a single-ended subwoofer above 60 W at 10% THD+N. Its specified total harmonic distortion plus noise is 0.07%, making it suitable for consumer audio equipment where channel matching and low crossover distortion are important.
The device accepts PWM control signals, allowing it to operate with a compatible digital audio modulator such as the TAS5086. This architecture separates audio decoding and modulation from power amplification. It also means the selected modulator must support the signal format, switching frequency, channel count, and control requirements expected by the TAS5186A family.
Typical applications include 5.1-channel home-theater amplifiers, powered subwoofers, multichannel active speakers, and compact consumer audio receivers. Its 44-pin HTSSOP package supports surface-mount assembly, while the stated 0°C to 70°C operating range targets commercial indoor environments. Heat management remains important because sustained multichannel output can raise junction and PCB temperatures.
For a robust design, follow the manufacturer datasheet when assigning the power, ground, PWM input, and thermal-pad connections. Place input and power-ground connections to minimize switching-current loops, use the recommended decoupling arrangement, and provide sufficient copper area under the exposed pad. Verify thermal performance across the highest expected channel load rather than relying only on nominal output power.
This product page combines manufacturer specifications, application guidance, practical thermal and layout considerations, and directly documented family alternatives for engineers evaluating the TAS5186ADDV as the power stage of a multichannel Class-D audio system.
کے لیے ڈراپ اِن متبادل TAS5186ADDV — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
TAS5186ADDVR
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TAS5186ADDVG4
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TAS5186DDVG4
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TAS5186ADDV زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 6-Channel Class-D Audio Power Stage |
| Total Output Power | 210 W |
| Number of Output Channels | 6 channels |
| Per-Channel Output Power | 30 W per channel |
| Subwoofer Output Power | Greater than 60 W at 10% THD+N |
| Supply Voltage Range | 0 V to 34 V |
| Input Signal Type | PWM |
| Minimum Load Impedance | 3 ohm |
| Total Harmonic Distortion Plus Noise | 0.07% |
| آپریٹنگ درجہ حرارت رینج | 0 C to +70 C |
| پیکیج | 44-pin HTSSOP (DDV) |
| Package Width | 6.20 mm |
| ماؤنٹنگ ٹائپ | Surface Mount |
| Packaging | Tube |
TAS5186ADDV 6.20 mm پن کنفیگریشن گائیڈ
TAS5186ADDV (6.20 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TAS5186ADDV.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TAS5186ADDV کے لیے موزوں ہے 6 ایپلیکیشنs: 5.1-Channel Home Theater Amplifier, Powered Subwoofer Amplifier, Multichannel Active Speaker System, Consumer Audio Receiver, Digital Audio Speaker Amplifier, Powered Soundbar.
5.1-Channel Home Theater Amplifier
The TAS5186ADDV fits a 5.1-channel home-theater power stage because it combines six Class-D outputs with a 210-W family rating and a 0-V to 34-V supply range. The six channels can drive the five main speakers and a subwoofer from a digital audio modulator. Its stated capability above 60 W at 10% THD+N for a single-ended subwoofer supports compact but high-fidelity receiver designs. The implementation must include the manufacturer’s recommended power-ground, exposed-pad, and decoupling layout, while continuous multi-channel output requires thermal validation in the finished enclosure.
تجویز کردہ
Powered Subwoofer Amplifier
The TAS5186ADDV can serve as a high-output powered-subwoofer stage when its six channels are assigned to the required speaker configuration. The device is characterized for single-ended subwoofer output above 60 W at 10% THD+N and specifies a 3-ohm minimum load. The PWM interface allows a compatible digital modulator to preserve channel synchronization and reduce analog signal-chain complexity. Designers should select the amplifier configuration and thermal solution for the lowest speaker impedance, then verify output-device and speaker protection against sustained bass demand.
تجویز کردہ
Multichannel Active Speaker System
The TAS5186ADDV is appropriate for an active multichannel speaker system requiring several synchronized Class-D outputs from one audio power IC. Six integrated channels simplify the repeated use of separate amplifier packages, while the 210-W family rating provides ample system-level headroom for carefully designed speaker loads. The 44-pin HTSSOP package supports compact surface-mount assemblies but requires deliberate exposed-pad copper and power-ground routing. System integrators should match each PWM channel to the intended loudspeaker, use the stated 3-ohm load limit, and qualify sustained-output temperature rise.
تجویز کردہ
Consumer Audio Receiver
The TAS5186ADDV can provide the power-amplifier section of a compact consumer audio receiver where five surround channels and a subwoofer channel must be driven from a digital source. Its PWM architecture separates source conversion from power amplification, supporting a straightforward system partition around the TAS5086 modulator. The stated 0.07% THD+N supports high-fidelity playback, while the 0°C to 70°C operating range suits indoor commercial environments. Implementation should preserve channel mapping, observe the 0-V to 34-V supply range, and use the manufacturer’s reference layout to minimize switching noise.
تجویز کردہ
Digital Audio Speaker Amplifier
The TAS5186ADDV suits digital speaker-amplifier platforms that distribute PWM audio channels from a central processor to powered speaker outputs. Using the device as a dedicated power stage keeps switching amplification separate from source decoding and allows multiple channels to share a synchronized digital modulator. Its six-channel organization supports 5.1-channel or multi-zone arrangements, and its 210-W family rating allows meaningful speaker power in compact enclosures. The design team must still account for channel routing, amplifier mute behavior, thermal conditions, and the manufacturer-defined power-up requirements.
تجویز کردہ
Powered Soundbar
The TAS5186ADDV can implement multiple amplification channels in a powered soundbar or compact active loudspeaker enclosure. Six outputs provide flexible channel allocation for front, surround, and low-frequency drivers without requiring six separate amplifier packages. The surface-mount HTSSOP construction supports automated assembly and board-space savings, while the stated 0.07% THD+N suits consumer playback. Because all channels share the package and local power infrastructure, the PCB should provide robust exposed-pad cooling, low-impedance power distribution, and short output paths to the speaker connectors.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TAS5186ADDV — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | TAS5186ADDVR | TAS5186ADDVG4 | TAS5186DDVG4 |
|---|---|---|---|---|
| Package | HTSSOP-44 (DDV) | HTSSOP-44 (DDV) | HTSSOP-44 (DDV) | HTSSOP-44 (DDV) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Output Channels | 6 channels | 6 channels | 6 channels | 6 channels |
| Total Output Power | 210 W | 210 W | 210 W | 210 W |
| Supply Voltage Range | 0 V to 34 V | 0 V to 34 V | 0 V to 34 V | 0 V to 34 V |
| Input Type | PWM | PWM | PWM | PWM |
| Minimum Load Impedance | 3 ohm | 3 ohm | 3 ohm | 3 ohm |
| Total Harmonic Distortion Plus Noise | 0.07% | 0.07% | 0.07% | 0.07% |
اہم امتیازی خصوصیات
- Six integrated Class-D channels in one power-stage package (بمقابلہTAS5186DDVG4)
- Wide 0-V to 34-V supply operating range (بمقابلہTAS5186ADDVR)
- Specified 0.07% THD+N performance (بمقابلہTAS5186ADDVG4)
ڈیزائن نوٹس
Treat the exposed pad as the principal heat-spreading path rather than as an optional electrical connection. Follow the manufacturer land pattern and preserve uninterrupted ground copper beneath the HTSSOP-44 package. Validate the design with the highest sustained multichannel output, speaker impedance, ambient temperature, and enclosure conditions because the 210-W family rating does not establish safe continuous dissipation for every channel combination.
Use the manufacturer datasheet for the complete power, ground, PWM input, and exposed-pad network. Place high-frequency decoupling close to the relevant supply pins and keep switching-current loops compact. Speaker outputs are high-energy nodes, so route them away from sensitive audio inputs and keep the power-ground return path short and wide to reduce voltage drops and radiated switching noise.
Do not assume that the 210-W family rating means every one of the six outputs can deliver 210 W continuously. The exact ordering information lists 30 W output power, a 3-ohm minimum load, and operation from 0 V to 34 V. Verify modulation compatibility, speaker impedance, protection behavior, and thermal limits for the intended configuration before layout release.
Plan the digital audio subsystem to keep PWM timing and channel mapping consistent across all six outputs. Decouple the modulator and power stage according to their individual datasheets, observe any manufacturer-specified power-up behavior, and keep test points accessible for debugging. Separate low-level audio references from output-current paths to avoid common-impedance coupling and channel-to-channel imbalance.
تعمیل کی معلومات
Compliance declarations were not included in the available product summaries. Request current material and quality documentation for the exact ordering code before production approval.