Texas Instruments

THS3111ID - 90 MHz Low-Noise Current-Feedback Amplifier | TI

MPN: THS3111ID ✓ فعال
+/-5 V to +/-15 V Vdss 2 pA/sqrt(Hz) Id 8-pin SOIC (D) Package
MOQ: 1 |

THS3111ID جائزہ

The Texas Instruments THS3111ID is a single low-noise, high-voltage current-feedback amplifier with a 90 MHz bandwidth, 1300 V/us slew rate, and 260 mA output-current drive in an 8-pin SOIC package. The device operates from ±5 V to ±15 V supplies and is designed for high-performance signal-chain applications requiring wide bandwidth and low noise.

A current-feedback amplifier is a voltage-feedback amplifier variation that uses an internal transimpedance input stage and feedback impedance to set gain. Unlike a conventional voltage-feedback amplifier, a current-feedback amplifier maintains high bandwidth across a broad gain range, although its gain-setting resistor value and feedback network remain important to the final signal-integrity result. The THS3111ID combines this architecture with low-noise operation for instrumentation, video, communications, and industrial signal-conditioning systems.

The device provides 2 pA/sqrt(Hz) noninverting current noise, 10 pA/sqrt(Hz) inverting current noise, and 3 nV/sqrt(Hz) voltage noise. Its 90 MHz bandwidth supports high-speed waveform and signal-processing requirements. The specified 1300 V/us slew rate applies at an 8 V peak-to-peak load, while the 260 mA output-current capability provides useful drive for capacitive, transformer, and cable-style loads when the output-stage operating conditions are respected.

The THS3111ID uses a current-feedback topology rather than a conventional closed-loop voltage-feedback architecture. In a current-feedback design, the feedback resistor is normally placed in the feedback path and its value is selected for the required gain; the datasheet gain-versus-frequency and gain-versus-resistor guidance should be used rather than treating the part as a fixed-gain voltage-feedback amplifier. The wide supply range supports split-supply signal paths while preserving headroom for output swing.

Typical applications include video amplification, high-speed instrumentation, active filters, communications interfaces, and low-noise signal conditioning. The amplifier can also serve industrial measurement systems when its input common-mode range, output swing, noise, bandwidth, and load-drive requirements fit the selected operating point. PCB-level decoupling and short feedback paths are essential for preserving the high bandwidth and low-noise performance.

For a stable implementation, place the power bypass capacitors close to the supply pins, keep the inverting input and feedback components compact, and terminate unused inputs appropriately. Confirm output swing, input common-mode range, load capacitance, and thermal conditions with the manufacturer datasheet before operation. This page combines the manufacturer product information with practical design guidance and a parameter-by-parameter comparison framework.

کے لیے ڈراپ اِن متبادل THS3111ID — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں THS3111ID (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Amplifier Type, Inverting Current Noise, Noninverting Current Noise, Slew Rate, Supply Voltage Range.

Texas Instruments
Amplifier Type: Current-feedback operational amplifier
Inverting Current Noise: 10 pA/√Hz
Noninverting Current Noise: 2 pA/√Hz
موازنہ کریں THS3111ID →

THS3110IDR

✅ ڈراپ-اِن
📦 8-pin SOIC (D)
Same TI current-feedback family and 8-pin SOIC footprint; gain, bandwidth, noise, and output-drive differences require confirmation against the target circuit

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

THS3111IDG4

✅ ڈراپ-اِن
📦 8-pin SOIC (D)
Same THS3111 family and 8-pin SOIC footprint; orderable grade and qualification markings differ, so automotive or production requirements must be checked

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

THS3111IDR

✅ ڈراپ-اِن
📦 8-pin SOIC (D)
Same THS3111 electrical family and 8-pin SOIC footprint; tape-and-reel order code differs from the target device

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

THS3111ID زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Current-Feedback Amplifier
Channel Count 1 channel
Supply Voltage Range +/-5 V to +/-15 V
Bandwidth 90 MHz
Slew Rate 1300 V/us at RL = 8 VPP
Noninverting Current Noise 2 pA/sqrt(Hz)
Inverting Current Noise 10 pA/sqrt(Hz)
Voltage Noise 3 nV/sqrt(Hz)
Output Current Drive 260 mA
پیکیج 8-pin SOIC (D)
ماؤنٹنگ ٹائپ Surface Mount
Product Description Single low-noise, high-voltage current-feedback amplifier
Application Category Instrumentation, operational amplifier, buffer amplifier

THS3111ID 8-pin soic (d) پن کنفیگریشن گائیڈ

THS3111ID (8-pin soic (d) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

THS3111ID کے لیے 8-pin soic (d) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں THS3111ID.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

THS3111ID کے لیے موزوں ہے 6 ایپلیکیشنs: High-Speed Video Signal Conditioning, Industrial Instrumentation Signal Conditioning, Communications Receiver Front End, Active Filtering and Frequency Shaping, Audio and Low-Level Analog Amplification, Data Acquisition and ADC Drive.

📺

High-Speed Video Signal Conditioning

The THS3111ID fits video buffering and gain stages that benefit from a 90 MHz bandwidth and 1300 V/us slew rate. Its 260 mA output-current capability helps drive terminated cables, resistive loads, and downstream stages when the load and output-swing conditions remain within the manufacturer limits. The 3 nV/sqrt(Hz) voltage noise is useful when low-level video signals must pass through the amplifier without adding excessive broadband noise. Use the current-feedback feedback network specified in the manufacturer data sheet rather than applying a voltage-feedback resistor formula. PCB placement should minimize the feedback path and keep bypass capacitors close to the device.

🏭

Industrial Instrumentation Signal Conditioning

The THS3111ID is appropriate for instrumentation chains that require fast settling and low-noise amplification of sensor or measurement signals. Its 90 MHz bandwidth handles higher-bandwidth transducers more effectively than a slow precision amplifier, while 2 pA/sqrt(Hz) noninverting current noise and 3 nV/sqrt(Hz) voltage noise address sensitive front ends. The ±5 V to ±15 V operating range supports bipolar acquisition systems. Designers should confirm the input common-mode range at the selected supply and gain, then verify gain error and output swing before committing the circuit to a precision measurement application.

🌐

Communications Receiver Front End

The THS3111ID can amplify intermediate-frequency or baseband signals in communications equipment when the designer needs 90 MHz bandwidth and rapid slew-rate performance. Its 1300 V/us slew rate helps preserve large, fast transitions, while 260 mA output drive supports terminated receiver stages. The split-supply capability of ±5 V to ±15 V permits biasing around a central signal level. The amplifier's current-feedback architecture makes feedback-resistor selection critical, and PCB parasitics can materially affect high-frequency behavior. Validate the full gain network and output load with the manufacturer application guidance before production release.

⚡

Active Filtering and Frequency Shaping

The THS3111ID is well suited to wideband active-filter stages because its 90 MHz bandwidth and 1300 V/us slew rate support signal processing beyond the bandwidth of many general-purpose amplifiers. The device's 260 mA output-current capability is beneficial when the filter drives a termination or a following stage. Current-feedback gain behavior must be considered because changing the feedback resistor affects the realized gain and bandwidth. Select component values using the manufacturer gain and stability guidance, keep the inverting input and feedback network compact, and check the output for peaking at the filter's operating frequencies.

🎧

Audio and Low-Level Analog Amplification

The THS3111ID can serve low-level analog amplification stages where low noise, wide bandwidth, and fast transient response are important. Its 3 nV/sqrt(Hz) voltage noise and 2 pA/sqrt(Hz) noninverting current noise are useful for preserving small signals, while the 1300 V/us slew rate provides ample headroom for fast transitions. The wide bandwidth may exceed what an audio application requires, so the final design should account for integrated noise across the selected filter bandwidth and verify that the amplifier's output drive is appropriate for the audio load and stabilization network.

📱

Data Acquisition and ADC Drive

The THS3111ID is useful as an analog driver in high-speed data-acquisition systems when the ADC requires low noise and rapid settling. Its 90 MHz bandwidth, 1300 V/us slew rate, and 260 mA output drive can reduce the burden on the converter input network. The exact suitability depends on the ADC's input bandwidth, settling requirements, sampling rate, and capacitive input loading. Use short PCB routes and proper termination to limit reflection and distortion. Check the output swing and drive behavior at the required voltage, then compare measured settling and distortion against the acquisition budget.

What is the THS3111ID?
The THS3111ID is a single low-noise, high-voltage current-feedback operational amplifier from Texas Instruments. According to the manufacturer product information, it provides 90 MHz bandwidth, 1300 V/us slew rate, 260 mA output-current drive, and operation from ±5 V to ±15 V in an 8-pin SOIC package. It is intended for wideband signal conditioning where low noise and high slew rate are more important than using a conventional voltage-feedback amplifier.
What are the key specifications of THS3111ID that engineers should know?
The THS3111ID combines 90 MHz bandwidth with 1300 V/us slew rate and 260 mA output-current drive. According to the manufacturer product page and THS3111 data sheet, its noise figures are 2 pA/sqrt(Hz) noninverting current noise, 10 pA/sqrt(Hz) inverting current noise, and 3 nV/sqrt(Hz) voltage noise. The amplifier operates from ±5 V to ±15 V and is packaged in an 8-pin SOIC.
What is the supply voltage range of THS3111ID?
The THS3111ID operates from ±5 V to ±15 V. The manufacturer data sheet describes the THS3110 and THS3111 as low-noise, high-voltage current-feedback amplifiers designed for wide supply ranges of ±5 V through ±15 V. The device therefore supports split-supply signal paths with positive and negative rails, subject to the detailed input common-mode and output swing limits in the data sheet.
Where can I download the THS3111ID datasheet PDF?
The official THS3111 datasheet is available through the Texas Instruments product page for THS3111. The same document contains the detailed specifications, pin descriptions, ordering information, typical performance curves, and application guidance for the THS3111ID. Use the manufacturer PDF for design work because distributor copies and third-party document mirrors may have different formatting or older revision identifiers.
Where can I find the THS3111ID pinout?
The THS3111ID pinout is shown in the manufacturer data sheet and the TI product-detail page identifies the device as an 8-pin SOIC (D). The package uses the standard 8-pin SOIC library representation in this listing. Before assigning PCB nets, verify every pin number and signal name against the pin-description table in the manufacturer data sheet, especially the supply, input, output, and feedback connections.
Is the THS3111ID a voltage-feedback amplifier?
No. The THS3111ID is a current-feedback amplifier. Its feedback network uses the gain-setting resistor in a different manner from a conventional voltage-feedback amplifier, and the manufacturer data sheet provides guidance for selecting the feedback resistor and predicting gain and bandwidth. Because the architecture behaves differently, resistor values and compensation details should not be copied directly from an unrelated voltage-feedback design.
What can replace the THS3111ID?
The closest same-family replacement identified for the THS3111ID is the THS3110IDR, while the THS3111IDG4 and THS3111IDR represent related orderable variants. Before using any replacement, verify the exact pinout, supply rating, gain-setting resistor recommendation, bandwidth, slew rate, and output-drive requirements in the manufacturer data sheet. A package match alone is not sufficient for a safe drop-in decision.
What is the best drop-in replacement for THS3111ID?
The THS3111IDR is the closest orderable variant because it retains the THS3111 family identifier and 8-pin SOIC package, while the THS3110IDR is a same-family alternative whose gain and bandwidth behavior should be checked against the target circuit. The available cross-reference information does not establish a cross-brand pin-to-pin substitute, so engineers should confirm the manufacturer pin table and electrical requirements before approving a replacement.
Is THS3111ID suitable for high-speed video signal chains?
The THS3111ID is suitable for high-speed video-style signal paths when the circuit stays within the amplifier's stated operating limits. Its 90 MHz bandwidth, 1300 V/us slew rate, and 260 mA output-current capability provide ample speed for many video buffering and active-filter applications. Output swing, input common-mode range, gain error, and load stability must still be checked for the intended video standard and termination network.
THS3111ID vs THS3110IDR - which is better for a wideband amplifier?
Choose the THS3111ID when the design specifically requires its THS3111 performance and the manufacturer data sheet confirms the required noise, bandwidth, and output-drive targets. Consider the THS3110IDR only after checking its gain, bandwidth, slew-rate, supply, and feedback-resistor recommendations against the same circuit. The two parts belong to the same TI family, but the available information does not justify claiming identical electrical performance.
When should I choose the THS3111ID over a voltage-feedback amplifier?
Choose the THS3111ID when the design requires the combination of 90 MHz bandwidth, 1300 V/us slew rate, low current and voltage noise, and the current-feedback gain-setting method. A conventional voltage-feedback amplifier may be preferable when its gain-error behavior, gain-setting resistor, supply range, and output drive better match a simpler precision or single-ended signal chain.
What design details matter most for a THS3111ID amplifier?
Short feedback traces, close power-decoupling capacitors, correct grounding, and a feedback resistor selected from the manufacturer guidance are the most important implementation details. Because the THS3111ID is a current-feedback amplifier, changing the feedback resistor can affect both gain and bandwidth. The manufacturer data sheet should be used for recommended values, output loading, and stability information rather than relying on generic voltage-feedback formulas.
How much output current can the THS3111ID drive?
The THS3111ID provides 260 mA of output-current drive. The manufacturer data sheet lists this capability alongside 90 MHz bandwidth and 1300 V/us slew rate at an 8 V peak-to-peak load. Actual usable drive depends on the supply voltage, output swing, load resistance, load capacitance, frequency, and thermal conditions, so the complete operating point should be verified before driving a load.
Where can I buy THS3111ID online?
Use the Request a Quote form on this page to ask about THS3111ID availability, order quantity, and delivery scheduling for the required 8-pin SOIC orderable code. The manufacturer and distributor listings identify the part, but no quantity-break pricing is reproduced in the structured price evidence for this record. A quotation request gives the purchasing team a direct route to confirm current supply and package quantity.
What is the price of THS3111ID?
The current THS3111ID commercial terms should be requested through the Request a Quote form on this page. The available distributor snippets identify the exact MPN but do not print a qualifying quantity-break table, so no price is asserted in this structured record. Include the required order quantity, ship-to region, and acceptable delivery date when submitting the request.
What is the lead time for THS3111ID?
Request the current THS3111ID lead time through the Request a Quote form on this page. The available product listings show the exact 8-pin SOIC orderable part, but they do not state a fixed factory or distributor lead time. A purchasing response should specify the requested quantity, delivery location, approved vendor list, and whether partial shipments are acceptable.

کے لیے انجینئرنگ ریفرنس ڈیٹا THS3111ID — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the THS3111ID when the design needs a low-noise current-feedback amplifier with 90 MHz bandwidth, 1300 V/us slew rate, 260 mA output drive, and ±5 V to ±15 V operation. The THS3111IDR is a closely related orderable variant in the same package and is the logical first alternate to evaluate when procurement or assembly requires a different order code. Consider the THS3110IDR only after checking its gain behavior, feedback resistor recommendation, bandwidth, noise, and output drive against the target circuit. No cross-brand part is listed because the available cross-reference information does not establish a verified pin-to-pin substitute. For designs sensitive to gain error or using a standard voltage-feedback gain network, compare the current-feedback implementation with a conventional amplifier before committing the layout.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ THS3110IDR THS3111IDG4 THS3111IDR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC (D) 8-pin SOIC (D) - same package 8-pin SOIC (D) - same package 8-pin SOIC (D) - same package
Amplifier Architecture Current-Feedback Amplifier Current-Feedback Amplifier Current-Feedback Amplifier Current-Feedback Amplifier
Channel Count 1 channel 1 channel 1 channel 1 channel

اہم امتیازی خصوصیات

  • Wideband current-feedback performance (بمقابلہTHS3110IDR)
  • Low current and voltage noise (بمقابلہTHS3111IDR)
  • Output drive for terminated and downstream loads (بمقابلہTHS3111IDG4)

ڈیزائن نوٹس

Place the feedback resistor, inverting input connection, and input compensation components close to the THS3111ID. Current-feedback amplifiers are sensitive to parasitic capacitance in the feedback loop, so long traces can alter gain, peaking, and stability. Route the output to the load without unnecessary stubs, use a solid ground reference, and confirm the feedback network against the manufacturer gain and stability guidance.

Use the supply bypass configuration recommended in the manufacturer data sheet and place the capacitors immediately adjacent to the supply pins. Keep the loop formed by the device, capacitors, and ground plane as short as practical. The THS3111ID supports ±5 V to ±15 V operation, but the usable output swing and input range are narrower than the full rail-to-rail envelope and must be checked for each design.

Evaluate output loading, cable termination, and downstream input capacitance before relying on the 260 mA output-current capability. The 90 MHz bandwidth makes board-level return paths and ground inductance important, especially around large-signal transitions. If the gain-setting resistor is changed, recheck both gain and bandwidth because current-feedback amplifiers do not follow the voltage-feedback gain relationship.

Do not copy a feedback resistor from a conventional voltage-feedback amplifier or assume that two current-feedback parts with the same package have identical gain behavior. Verify pin assignments, feedback values, compensation, output swing, and operating-point requirements in the manufacturer data sheet. This is particularly important when substituting THS3110IDR for THS3111ID in a high-gain or precision signal path.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product information identifies the THS3111 family and orderable THS3111ID, but the available records do not explicitly state the compliance values shown above. Confirm current material and quality documentation with Texas Instruments before production release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

THS3111ID datasheet THS3111ID specifications THS3111ID pinout THS3111ID 90 MHz bandwidth THS3111ID 1300 V/us THS3111ID current feedback amplifier THS3111ID 8-pin SOIC THS3111ID equivalent THS3111ID replacement THS3111ID vs THS3110IDR Texas Instruments THS3111ID THS3111ID video amplifier THS3111ID low noise amplifier THS3111ID price THS3111ID stock

متعلقہ اجزاء اور اصطلاحات

Texas Instruments THS3111ID THS3111 THS3110IDR THS3111IDG4 THS3111IDR current-feedback amplifier operational amplifier analog amplifier signal-conditioning IC semiconductor feedback resistor gain bandwidth slew rate 90 MHz bandwidth 1300 V/us slew rate 260 mA output-current drive current noise voltage noise SOIC-8 8-pin SOIC surface-mount package split-supply operation active filter video signal chain
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں