Texas Instruments

THS4042ID - 165MHz Dual High-Speed Amplifier | Texas Instruments

MPN: THS4042ID ✓ فعال
±16 V/32 V Vdss 100 mA typical Id 8-SOIC Package
MOQ: 1 |

THS4042ID جائزہ

Texas Instruments THS4042ID is a dual, C-stable, voltage-feedback operational amplifier with a 165 MHz gain-bandwidth product, 400 V/µs slew rate, and an 8-SOIC package. Designed for high-speed signal conditioning, it can drive capacitive loads and is suitable for video-line drivers, ADC buffers, and similar low-impedance systems. The device uses a conventional voltage-feedback architecture, providing a practical balance of bandwidth, output drive, and low distortion.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. Within the broader hierarchy of analog signal-chain ICs, an operational amplifier functions as a voltage-feedback amplifier and, in this case, as a dual high-speed amplifier. The dual configuration provides two amplifier channels in one package, simplifying board allocation while supporting common high-speed applications.

The THS4042 family's principal performance characteristics include 165 MHz bandwidth, 400 V/µs slew rate, and high output-current capability of 100 mA typical. Its C-stable operation allows use with capacitive loads without requiring an external isolation resistor in the standard application configuration. The manufacturer identifies video-line driving and ADC buffering as typical uses, applications where wide bandwidth and rapid large-signal response are more important than the low-noise characteristics emphasized in precision-only amplifiers.

The voltage-feedback topology supports conventional negative-feedback operation and is well suited to gain and signal-conditioning stages requiring predictable behavior. The C-stable architecture is particularly valuable when the amplifier drives cables, ADC input networks, or other loads that include appreciable capacitance. Its 165 MHz bandwidth provides ample headroom for high-speed instrumentation and video systems, while the 400 V/µs slew rate enables large voltage changes to be reproduced without excessive slew-rate distortion.

Typical deployments include video distribution, high-speed ADC input buffering, active filtering, test and measurement signal conditioning, and general-purpose high-speed analog interfaces. Because the THS4042ID contains two channels, both sides of a balanced signal path can be placed in the same package. This can simplify routing and reduce the number of separate amplifier packages on a board.

Designers should pay particular attention to feedback-loop stability, output swing, input and output impedance, and the power-supply requirements. The feedback network should use short, low-inductance traces, especially when operating near the device's upper bandwidth limit. Decoupling capacitors should be placed close to the supply pins, and the output load must remain compatible with the amplifier's drive capability and recommended operating conditions.

This product page combines the manufacturer's device description with practical guidance for selecting, comparing, and implementing the THS4042ID. It highlights where the dual C-stable voltage-feedback amplifier fits, distinguishes package and ordering options, and identifies the principal electrical checks to perform before releasing a high-speed analog layout.

کے لیے ڈراپ اِن متبادل THS4042ID — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں THS4042ID (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Amplifier Type, Package.

Texas Instruments
Amplifier Type: Voltage-feedback operational amplifier
Package: 8-SOIC (D)
موازنہ کریں THS4042ID →

THS4042IP

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-pin SOIC
Same THS4042 dual amplifier family and 8-pin SOIC outline; ordering-code and temperature qualification details must be confirmed

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

AD826ARZ

✅ ڈراپ-اِن
📦 8-pin SOIC
Dual amplifier in the same 8-pin SOIC footprint; bandwidth, slew rate, supply range, and drive must be verified against the AD826 datasheet

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

THS4042ID زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Dual voltage-feedback operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 165 MHz
Slew Rate 400 V/µs
Stability C-stable
Output Current 100 mA typical
Total Harmonic Distortion -75 dBc at 1 MHz
سپلائی وولٹیج ±16 V/32 V
پیکیج 8-SOIC
Package Width 3.90 mm
ماؤنٹنگ ٹائپ Surface mount

THS4042ID 3.90 mm پن کنفیگریشن گائیڈ

THS4042ID (3.90 mm پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

THS4042ID کے لیے 3.90 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں THS4042ID.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

THS4042ID کے لیے موزوں ہے 6 ایپلیکیشنs: Video-Line Driving, High-Speed ADC Input Buffering, Active Video Filtering, Test and Measurement Signal Conditioning, High-Speed Instrumentation Buffer, Communications Interface Conditioning.

📺

Video-Line Driving

The THS4042ID fits video-line interfaces because its 165 MHz bandwidth and 400 V/µs slew rate support rapid signal transitions, while C-stable operation helps accommodate cable and connector capacitance. It can preserve signal amplitude and edge fidelity across short video distribution paths without an external isolation resistor in the standard configuration. Place the device close to the source, use short feedback paths, and verify the target impedance and maximum capacitive load. Board-level grounding and connector return paths should be controlled because long cable runs can introduce reflections beyond the amplifier's bandwidth.

📈

High-Speed ADC Input Buffering

The dual THS4042ID is appropriate for buffering high-speed converter inputs when the system needs more drive or bandwidth than the source can provide directly. Its 165 MHz bandwidth, 400 V/µs slew rate, and 100 mA typical output current help isolate the ADC input capacitance from the signal source. The two channels can support differential or related signal paths while reducing package count. Validate settling time, kickback behavior, output swing, and stability in the complete source-converter network before production release.

🎞️

Active Video Filtering

THS4042ID can implement wideband active filters where the signal path must retain predictable gain and phase performance at video-related frequencies. Its 165 MHz bandwidth provides substantial frequency range for low-pass, band-pass, and signal-conditioning networks, while the C-stable characteristic supports realistic source and load impedances. Keep the feedback network compact and use identical or closely matched components when channel-to-channel phase and gain matching matters. Validate the filter response with the actual source impedance and load because parasitic capacitance can alter the intended cutoff and peaking.

📡

Test and Measurement Signal Conditioning

The THS4042ID is suitable for high-speed instrumentation buffers that must drive downstream cables, switches, or acquisition inputs without severe slew-rate limiting. Its 165 MHz bandwidth and 400 V/µs slew rate allow it to preserve moderate-amplitude, fast-edge signals in a measurement chain. C-stable operation is beneficial when the amplifier faces capacitive fixtures or long interconnects. Use short, controlled-impedance routing and provide local bypassing so fixture reflections and supply inductance do not dominate the measured result.

⚡

High-Speed Instrumentation Buffer

A dual THS4042ID can buffer balanced or complementary instrumentation signals when the source impedance and downstream loading would otherwise degrade amplitude or settling behavior. Its two channels provide consistent device characteristics within one 8-SOIC package, and the 165 MHz bandwidth is well suited to moderate-speed waveform acquisition. The amplifier's 100 mA typical output drive helps overcome downstream capacitance, but stability must be checked with the full cable and input network. Maintain symmetric routing where timing alignment between channels is important.

🌐

Communications Interface Conditioning

The THS4042ID can condition short-reach communications signals that require more bandwidth or output drive than a general-purpose operational amplifier supplies. Its 165 MHz gain-bandwidth product and 400 V/µs slew rate allow it to handle fast transitions while C-stable operation supports capacitive PCB and connector loads. The dual channel is useful for transmitting and receiving paths on a communications board. The designer should still evaluate protocol bandwidth, return loss, jitter sensitivity, and the complete channel impedance rather than treating the amplifier as a complete communications solution.

تجویز کردہ پروڈکٹس کا خلاصہ

THS4042 Family-level device identifier استعمال ہوتا ہے: Video-Line Driving, High-Speed ADC Input Buffering, Active Video Filtering, Test and Measurement Signal Conditioning, High-Speed Instrumentation Buffer, Communications Interface Conditioning THS4041 Single-channel member of the same high-speed amplifier family استعمال ہوتا ہے: Video-Line Driving, High-Speed ADC Input Buffering, Active Video Filtering, Test and Measurement Signal Conditioning, High-Speed Instrumentation Buffer, Communications Interface Conditioning
What is the THS4042ID?
The THS4042ID is a dual, 165 MHz, C-stable voltage-feedback operational amplifier from Texas Instruments packaged in an 8-SOIC. According to the manufacturer product page, the device belongs to the THS4042 family and is intended for high-speed signal-conditioning applications that require rapid response and capacitive-load drive. It provides two amplifier channels, 400 V/µs slew rate, and the ability to drive any capacitive load.
What are the key specifications of THS4042ID?
The THS4042ID combines two amplifier channels with a 165 MHz gain-bandwidth product, 400 V/µs slew rate, and 100 mA typical output drive. According to the Texas Instruments THS4042 product description, it is a C-stable voltage-feedback amplifier with low distortion, including THD of -75 dBc at 1 MHz. The package is an 8-SOIC, and the device supports ±16 V or 32 V total supply operation.
Where can I download the THS4042ID datasheet PDF?
The official THS4042 data and support page is the appropriate starting point for the THS4042ID datasheet and ordering information. According to Texas Instruments, the family is the THS4042 dual, 165 MHz, C-stable voltage-feedback amplifier. Use the manufacturer PDF or product-page documents for the complete pin descriptions, recommended operating conditions, electrical characteristics, and application guidance.
Where can I find the THS4042ID pinout?
The THS4042ID pinout is documented in the manufacturer's THS4042 data sheet, which covers both amplifier channels in the 8-SOIC package. Use the pin-description table and package drawing to identify supply, input, output, and enable or shutdown connections before laying out the PCB. Because individual terminal assignments are not stated on the product summary page, consult the official pin table rather than inferring connections from package position alone.
What is the difference between THS4042ID and THS4042IDR?
THS4042ID and THS4042IDR identify the same dual THS4042 amplifier in different orderable packaging forms, with the principal electrical functions retained. The product comparison identifies the distinction as ordering or package format rather than a change in the 165 MHz bandwidth or 400 V/µs slew rate. Engineers should verify the manufacturer's ordering table for reel, tube, and temperature-related suffixes when their approved BOM requires a specific shipping format.
Is THS4042ID suitable for video-line driving?
Yes, the THS4042ID is suitable for video-line driving because it combines C-stable operation with 165 MHz bandwidth and 400 V/µs slew rate. The manufacturer specifically identifies video-line driving as a typical application. Keep feedback traces short, provide local supply decoupling, and verify that the cable or load capacitance and required output swing remain within the device's recommended operating limits.
Is THS4042ID suitable as an ADC buffer?
Yes, the THS4042ID is suitable for buffering high-speed ADC inputs because the manufacturer identifies ADC buffering as a typical application and the amplifier provides 165 MHz bandwidth with high output drive. Its C-stable characteristic supports capacitive loading commonly encountered at converter inputs. The exact ADC bandwidth, kickback, settling, and drive requirements should still be checked against the specific converter and system timing.
When should I choose the THS4042ID instead of a lower-speed amplifier?
Choose the THS4042ID when the signal path requires substantially more bandwidth and slew rate than a general-purpose amplifier can provide. Its 165 MHz gain-bandwidth product and 400 V/µs slew rate are particularly useful for video, ADC interfaces, active filtering, and high-speed test equipment. If the signal is slow and low noise is the dominant requirement, a precision amplifier may provide a better overall fit.
What can replace the THS4042ID?
A valid replacement should preserve the dual 8-SOIC footprint, pin assignments, supply range, bandwidth, slew rate, and stable behavior with the intended capacitive load. No distinct pin-compatible drop-in replacement was established from the available manufacturer and cross-reference information. THS4042IDR and THS4042IDGNR are ordering or packaging forms of the THS4042 family rather than independent drop-in substitutes.
Is THS4042ID the same as THS4041?
No. The THS4042 is a dual amplifier, while the THS4041 is the corresponding single-amplifier member of the family. Both are described as high-speed voltage-feedback amplifiers capable of driving capacitive loads. A THS4041 may satisfy a design needing one amplifier, but it is not a pin-for-pin dual-channel replacement for the THS4042ID.
How much supply voltage does the THS4042ID accept?
The THS4042ID operates from dual ±16 V supplies, equivalent to a total supply span of 32 V. The device is a dual high-speed voltage-feedback amplifier in an 8-SOIC package. Confirm all absolute-maximum and recommended operating conditions in the manufacturer data sheet, including supply sequencing and input or output voltage limits, before finalizing the power architecture.
Does the THS4042ID need an isolation resistor to drive a capacitive load?
The THS4042 family is C-stable and is specifically described as capable of driving any capacitive load. According to the manufacturer family description, this characteristic makes it appropriate for video lines and ADC inputs. The output network should still be reviewed in the context of the actual cable, ADC input capacitance, feedback topology, and operating frequency, because those details affect practical loop behavior.
How should power decoupling be arranged for THS4042ID?
Place the supply-decoupling capacitors close to the THS4042ID power and ground pins, and use short, low-inductance return paths. At high operating frequencies, trace and via inductance can degrade supply decoupling even when the nominal capacitor value is correct. Follow the recommended application layout in the manufacturer data sheet and keep feedback components close to the amplifier inputs to minimize parasitic feedback.
Where can I buy THS4042ID online?
The THS4042ID can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial terms, quantity availability, and delivery scheduling. Because market conditions and inventory can change, request confirmation for the exact 8-SOIC orderable MPN rather than relying on an unrelated package or reel suffix.
What is the price and lead time for THS4042ID?
Use the Request a Quote form on this page to obtain the current THS4042ID price, stock position, minimum order quantity, and lead time. Quote-based confirmation ensures that the exact MPN, package form, and order quantity match the intended production build. The current commercial response should be used for budgeting and scheduling because availability and delivery terms may vary by order quantity.

کے لیے انجینئرنگ ریفرنس ڈیٹا THS4042ID — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the THS4042ID when a dual high-speed voltage-feedback amplifier is required for video, ADC buffering, active filtering, or measurement interfaces. Its 165 MHz bandwidth, 400 V/µs slew rate, and C-stable operation distinguish it from general-purpose and precision amplifiers. Use THS4042IDR only when the approved BOM requires that ordering or packing form; it is not a distinct electrical substitute. Consider THS4041 when only one amplifier channel is required, but it cannot replace a dual-channel THS4042 footprint without redesign. No separate pin-compatible drop-in replacement was established, so a second-source decision should require direct confirmation of pinout, supply range, stability, bandwidth, slew rate, output drive, and package tolerances.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Package 8-SOIC
Brand Texas Instruments
Amplifier Configuration Dual
Gain-Bandwidth Product 165 MHz
Slew Rate 400 V/µs
Output Current 100 mA typical
Total Harmonic Distortion -75 dBc at 1 MHz
Supply Voltage ±16 V/32 V
Stability C-stable

ڈیزائن نوٹس

Place input, output, and feedback components close to the THS4042ID and keep the feedback loop physically small. High-speed voltage-feedback amplifiers can acquire unwanted loop gain when parasitic inductance or capacitance enters the feedback path. Route each channel consistently, minimize shared return-path discontinuity between paired channels, and use a solid ground plane to reduce coupling into sensitive analog nodes.

Use the manufacturer's recommended decoupling arrangement and connect the capacitors directly to the relevant supply and ground pins. High-speed operation can expose the amplifier to supply impedance caused by long traces and inadequate bypassing, even when the external load is light. Use short, low-inductance supply connections and verify the power source can support transient current demanded by the 400 V/µs slew rate.

C-stable operation does not remove the need to evaluate the complete feedback network and load. Cable capacitance, ADC input capacitance, connector parasitics, and output impedance can alter loop stability and frequency response. Check gain-bandwidth and slew-rate requirements with the intended source and load, and avoid assuming that a generic precision-amplifier compensation method applies to this high-speed C-stable device.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

Compliance status was not stated in the manufacturer or distributor result excerpts. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations with Texas Instruments before qualification.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

THS4042ID datasheet THS4042ID datasheet pdf THS4042ID pinout THS4042ID 8-SOIC THS4042ID 165MHz amplifier THS4042ID 400V/us slew rate Texas Instruments THS4042ID THS4042ID ADC buffer THS4042ID video line driver THS4042ID equivalent THS4042ID replacement THS4042ID vs THS4041 THS4042ID price THS4042ID stock THS4042 C-stable amplifier

متعلقہ اجزاء اور اصطلاحات

Texas Instruments THS4042ID THS4042 THS4041 THS4042IDR THS4042IDGNR dual operational amplifier voltage-feedback amplifier high-speed amplifier analog signal-chain IC C-stable 165 MHz 400 V/µs 100 mA -75 dBc 8-SOIC SOIC package family surface-mount package ADC buffer video-line driver active filter test and measurement capacitive load gain-bandwidth product slew rate
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں