NXP Semiconductors

TJA1028TK/3V3/10:1 - 3.3V LIN Transceiver | NXP

MPN: TJA1028TK/3V3/10:1 ✓ فعال
12 V Vdss 70 mA Id 8-HVSON, 3 x 3 mm Package
MOQ: 1 |

TJA1028TK/3V3/10:1 جائزہ

NXP Semiconductors TJA1028TK/3V3/10:1 is a LIN 2.0 and 2.1 automotive transceiver with an integrated low-dropout voltage regulator, a 3.3 V regulator output, and a 10:1 bus-slope threshold ratio in an 8-HVSON 3 x 3 mm surface-mount package. The integrated regulator can supply up to 70 mA, reducing the component count required for compact LIN nodes.

A LIN transceiver, or Local Interconnect Network transceiver, connects a low-speed serial network node to a vehicle electrical network. The LIN bus belongs to the broader vehicle networking hierarchy, where simple sensors and actuators share a communication backbone with higher-bandwidth vehicle networks. The TJA1028 combines physical-layer signaling with local regulated power, positioning it between standalone LIN transceivers and larger system-basis-chip solutions.

Key features include LIN 2.0 and LIN 2.1 operation, compliance with SAE J2602 and ISO 17987-4:2016 for 12 V systems, a 3.3 V regulated output, and an integrated regulator rated up to 70 mA. The 10:1 ordering suffix identifies the device threshold configuration. Its 8-HVSON package is designed for compact surface-mount assemblies where board area, EMC behavior, and short return paths are important.

The integrated regulator allows a transceiver node to derive a local 3.3 V rail from the vehicle supply while preserving a single LIN bus connection. The regulator and transceiver share a compact package, but their functions remain distinct: the transceiver handles bus-level transmit and receive signaling, while the regulator supports local loads. This separation makes the device suitable for small sensor, actuator, and body-control nodes that do not require a complete system-basis chip.

Typical applications include LIN-controlled vehicle lamps, door modules, seat controls, climate-control peripherals, and compact motor or sensor interfaces. The 3.3 V output is particularly useful for a microcontroller, signal-conditioning circuit, or digital sensor that requires a stable low-voltage rail beside a LIN physical interface. Using one IC for communication and local power reduces PCB area and assembly cost.

PCB implementation should preserve a direct, short LIN connection and follow the manufacturer layout guidance for the HVSON exposed pad and supply decoupling. Confirm the regulator's thermal performance at the expected ambient temperature and ensure that its 70 mA capability is not shared with loads outside the intended design. The manufacturer datasheet pin-description table should be used for exact pad and exposed-pad assignments.

This product page combines the exact ordering information, LIN compliance details, regulator capability, package characteristics, application guidance, and drop-in-family analysis needed to evaluate the TJA1028TK/3V3/10:1 before schematic and PCB sign-off.

کے لیے ڈراپ اِن متبادل TJA1028TK/3V3/10:1 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TJA1028TK/3V3/10:1 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package.

NXP Semiconductors
Package: 8-pin HVSON (3x3 mm) with exposed pad

TJA1028TK/3V3/10/2Z

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-HVSON (3 x 3 mm)
Retains the 3.3 V output, 70 mA regulator capability, and 10:1 threshold configuration; ordering and qualification suffix differ

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TJA1028TK/3V3/10/J

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-HVSON (3 x 3 mm)
Retains the 3.3 V output, 70 mA regulator capability, and 10:1 threshold configuration; ordering and qualification suffix differ

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TJA1028TK/3V3/20/J

✅ ڈراپ-اِن
NXP Semiconductors
📦 8-HVSON (3 x 3 mm)
LIN Transceiver + Integrated LDO (System Basis Chip) · LIN 2.0 / LIN 2.1 / SAE J2602 / ISO 17987-4:2016 (12 V) · 1 / 1 · Up to 20 kbps (LIN) · 4.5 V to 28 V · Up to 42 V · 3.3 V · Up to 70 mA

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

TJA1028TK/5V/10:1

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-HVSON (3 x 3 mm)
Regulator output changes from 3.3 V to 5.0 V while LIN communication, threshold ratio, and 70 mA regulator capability remain comparable

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TJA1028TK/5V/10/J

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 8-HVSON (3 x 3 mm)
Provides a 5.0 V regulator output rather than 3.3 V while retaining the 10:1 threshold configuration and 70 mA regulator capability

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TJA1028TK/3V3/10:1 تفصیلات

Product Type LIN transceiver with integrated voltage regulator
LIN Protocol Support LIN 2.0 and LIN 2.1
Automotive Network Compliance SAE J2602 and ISO 17987-4:2016 for 12 V systems
System Supply Rating 12 V
Integrated Regulator Output 3.3 V
Integrated Regulator Current 70 mA
Bus-Slope Threshold Ratio 10:1
Transceiver Type Half LIN bus transceiver
پیکیج 8-HVSON, 3 x 3 mm
ماؤنٹنگ ٹائپ Surface mount
آپریٹنگ درجہ حرارت -40 °C to +150 °C
Packing Method Tape reel
Regulator Topology Low-drop voltage regulator

TJA1028TK/3V3/10:1 8-hvson, 3 x 3 mm پن کنفیگریشن گائیڈ

TJA1028TK/3V3/10:1 (8-hvson, 3 x 3 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

TJA1028TK/3V3/10:1 کے لیے 8-hvson, 3 x 3 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TJA1028TK/3V3/10:1.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

TJA1028TK/3V3/10:1 کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive LIN Sensor Nodes, Vehicle Door and Body Modules, Automotive LED Lighting Controls, Climate-Control Peripheral Interfaces, Seat and Motor Control Interfaces, Industrial 12 V LIN Network Equipment.

🚗

Automotive LIN Sensor Nodes

The TJA1028TK/3V3/10:1 fits compact sensor nodes that communicate over a 12 V LIN network while requiring a local 3.3 V supply. Its LIN 2.0 and LIN 2.1 support, SAE J2602 and ISO 17987-4:2016 compliance, and 10:1 threshold configuration allow the transceiver to coexist with established vehicle-network behavior. The integrated 70 mA regulator can power a low-power microcontroller, sensor interface, or logic section without a separate regulator IC. A compact 8-HVSON 3 x 3 mm package also helps reduce board area. The design must keep the LIN route short, observe the recommended protection and grounding layout, and keep all regulator loads below 70 mA across the full -40 °C to +150 °C range.

🚗

Vehicle Door and Body Modules

Door and body-control modules can use the TJA1028TK/3V3/10:1 to combine LIN communication with local regulated power in a space-constrained assembly. The transceiver handles the physical LIN connection, while the integrated 3.3 V regulator supplies up to 70 mA for control logic or communication peripherals. The 10:1 threshold configuration is suited to LIN networks specified at 12 V, and the operating range of -40 °C to +150 °C supports harsh vehicle environments. Engineers should allocate the regulator's 70 mA across all local loads, retain an unobstructed thermal path under the exposed pad, and follow the manufacturer layout pattern to minimize susceptibility to bus transients and EMC coupling.

💡

Automotive LED Lighting Controls

The TJA1028TK/3V3/10:1 is suitable for LIN-addressed lighting controls where a remote lamp or indicator driver needs a compact communication interface and a low-voltage logic rail. The 3.3 V regulator can support up to 70 mA for command logic, status feedback, or a small local controller, while the LIN transceiver provides network connectivity in the same 8-HVSON package. Combining these functions reduces board space compared with a discrete transceiver-regulator arrangement. The 10:1 threshold configuration must align with the vehicle LIN network, and regulator capacity must be checked before adding higher-current LED circuitry. High-current lamp drive and any inductive switching stage should remain separate from this low-voltage supply path.

🏭

Climate-Control Peripheral Interfaces

Compact climate-control peripherals benefit from the TJA1028TK/3V3/10:1 because the LIN transceiver and 3.3 V regulator share one small 8-HVSON package. The integrated regulator can provide up to 70 mA for sensor conditioning, status logic, or a low-power control MCU while the transceiver communicates with the vehicle LIN network. LIN 2.0 and LIN 2.1 support and 12 V SAE J2602 and ISO 17987-4:2016 compliance make the interface suitable for modern vehicle electrical architectures. Designers should account for transient energy on the LIN wiring, maintain a low-impedance ground return, and separate the regulator output from high-current motor-drive stages to prevent load changes from disturbing communication.

🔧

Seat and Motor Control Interfaces

The TJA1028TK/3V3/10:1 can serve as the communication and local-power front end for small seat, latch, or motor-control nodes. Its LIN physical layer provides network access, while the integrated 3.3 V, 70 mA regulator supplies control logic that does not belong directly on the noisy 12 V bus. The compact 8-HVSON footprint supports space-constrained modules, and the -40 °C to +150 °C operating range covers demanding vehicle locations. The motor power stage should use separate robust drive circuitry, with its return currents kept away from the transceiver ground reference. Before release, validate startup, bus thresholds, regulator loading, thermal operation, and fault behavior under the vehicle's worst-case supply and temperature conditions.

🏭

Industrial 12 V LIN Network Equipment

Although primarily an automotive LIN interface, the TJA1028TK/3V3/10:1 can also serve compact industrial equipment connected to a 12 V LIN-compatible network. Its integrated 3.3 V regulator supplies up to 70 mA for local control electronics, reducing the need for a separate regulator when board area is constrained. The 10:1 threshold configuration and LIN 2.0 and LIN 2.1 support must match the network implementation, while the -40 °C to +150 °C range provides broad temperature capability. Industrial deployments still require careful review of ground offsets, wiring protection, EMC conditions, and bus termination or topology requirements. The manufacturer application information should guide the protection network and decoupling arrangement.

تجویز کردہ پروڈکٹس کا خلاصہ

TJA1028TK/3V3/10/2Z Same-family LIN transceiver with matching regulator and threshold configuration استعمال ہوتا ہے: Automotive LIN Sensor Nodes, Automotive LED Lighting Controls, Seat and Motor Control Interfaces TJA1028TK/3V3/20/J NXP Semiconductors استعمال ہوتا ہے: Automotive LIN Sensor Nodes, Vehicle Door and Body Modules, Climate-Control Peripheral Interfaces, Industrial 12 V LIN Network Equipment TJA1028TK/3V3/10/J Same-family ordering option for 3.3 V LIN nodes استعمال ہوتا ہے: Vehicle Door and Body Modules, Climate-Control Peripheral Interfaces, Seat and Motor Control Interfaces TJA1028TK/5V/10:1 Family option for 5 V local control logic استعمال ہوتا ہے: Automotive LED Lighting Controls, Industrial 12 V LIN Network Equipment
What is the TJA1028TK/3V3/10:1?
The TJA1028TK/3V3/10:1 is an NXP Semiconductors LIN 2.0 and LIN 2.1 transceiver with an integrated 3.3 V, 70 mA low-drop voltage regulator. According to the manufacturer product page, it is compliant with SAE J2602 and ISO 17987-4:2016 for 12 V systems and uses the 10:1 bus-slope threshold configuration. It is supplied in an 8-HVSON 3 x 3 mm surface-mount package for compact automotive LIN nodes.
What key specifications should engineers know about TJA1028TK/3V3/10:1?
The TJA1028TK/3V3/10:1 combines a LIN 2.0 and 2.1 physical-layer transceiver with a 3.3 V regulator capable of delivering 70 mA. According to the NXP product information, it supports 12 V SAE J2602 and ISO 17987-4:2016 networks. The device is specified from -40 °C to +150 °C, uses a 10:1 threshold configuration, and is packaged in an 8-HVSON 3 x 3 mm surface-mount format with a tape-reel packing option.
Where can I download the TJA1028TK/3V3/10:1 datasheet PDF?
The TJA1028TK/3V3/10:1 datasheet can be obtained from the NXP product page at https://www.nxp.com/part/TJA1028TK, with a manufacturer-hosted PDF copy also available through the supplied LCSC datasheet link. The datasheet contains the authoritative pin-description table, typical application circuit, electrical characteristics, exposed-pad information, and recommended PCB layout. Use the manufacturer document for final pin assignments and decoupling values.
Where can I find the TJA1028TK/3V3/10:1 pinout?
The TJA1028TK/3V3/10:1 pinout is defined in the NXP manufacturer datasheet and product-page documentation for the 8-HVSON package. Use the pin-description table when assigning the LIN, RXD, supply, ground, regulator-output, enable, and exposed-pad functions. The public package description confirms an 8-HVSON 3 x 3 mm device, but an exact numbered pad list is not reproduced on this page. Follow the exposed-pad connection and thermal-land guidance in the manufacturer datasheet.
What is the difference between TJA1028TK/3V3/10:1 and TJA1028TK/3V3/20/J?
The TJA1028TK/3V3/10:1 uses a 10:1 bus-slope threshold configuration, while the TJA1028TK/3V3/20/J uses a 20:1 configuration. Both devices are NXP TJA1028-family 3.3 V LIN transceivers with an integrated regulator capable of supplying 70 mA. Selection should be based on the bus thresholds required by the vehicle network, the applicable temperature/order code, and confirmation of the manufacturer's pin and package details for the specific orderable variant.
Can TJA1028TK/3V3/10:1 replace a LIN transceiver with a separate regulator?
The TJA1028TK/3V3/10:1 can replace a standalone LIN transceiver plus a local 3.3 V regulator when the original circuit uses compatible LIN thresholds, voltage limits, and an 8-HVSON footprint. Its integrated regulator can deliver up to 70 mA, simplifying compact nodes. It is not a direct substitute for a different transceiver package, a 5 V regulator variant, or a device requiring more than 70 mA, so schematic and pin-level verification remains essential.
When should I choose TJA1028TK/3V3/10:1 over a standalone LIN transceiver?
Choose the TJA1028TK/3V3/10:1 when a compact LIN node also requires a local 3.3 V rail of up to 70 mA. Integrating the regulator can reduce board area, assembly steps, and the number of power-supply components. A standalone LIN transceiver remains preferable when the node already has a suitable 3.3 V supply, needs regulator capacity above 70 mA, or uses a different bus-threshold configuration. The choice should follow the complete power-budget and LIN physical-layer requirements.
Is TJA1028TK/3V3/10:1 suitable for automotive sensor and actuator nodes?
The TJA1028TK/3V3/10:1 is suitable for compact 12 V automotive LIN nodes, including sensors and actuators that also need a 3.3 V local supply. Its LIN 2.0 and LIN 2.1 support, SAE J2602 and ISO 17987-4:2016 compliance, and -40 °C to +150 °C operating range fit demanding vehicle environments. The 70 mA regulator limit must be checked against the combined load, and the exact AEC-Q100 status should be confirmed for the selected ordering code.
What can replace the TJA1028TK/3V3/10:1?
The closest replacements are pin-compatible members of the NXP TJA1028 family that retain the 8-HVSON footprint, 3.3 V regulated output, 70 mA regulator capability, and compatible LIN thresholds. The 10:1 configuration is essential when replacing this exact orderable part; a 20:1 threshold variant may function as a family alternative but must be checked against the bus waveform and application requirements. A different package cannot serve as a drop-in replacement without PCB redesign.
Where can I buy TJA1028TK/3V3/10:1 and request a quote?
Use the Request a Quote form on this XAIPART page to request the TJA1028TK/3V3/10:1, current availability, lot traceability, and lead time. The exact part is listed as a 3.3 V, 70 mA LIN transceiver in an 8-HVSON 3 x 3 mm package. Commercial terms can vary with order quantity and required traceability, so submit the requested quantity and target date with the quote request.
What is the price of TJA1028TK/3V3/10:1?
The current commercial price for TJA1028TK/3V3/10:1 should be obtained through the Request a Quote form on this page. The structured pricing panel is designed to reflect current channel and quantity conditions rather than a static historical figure. For engineering planning, confirm the unit price, extended quantity total, packaging format, and availability with a current quotation before placing a production order.
What is the lead time and stock status for TJA1028TK/3V3/10:1?
The current stock position and lead time for TJA1028TK/3V3/10:1 should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, date, authorized-channel inventory, and traceability requirements. Provide the required quantity, date code policy, and packaging preference so the supply response reflects the actual production plan.
How much current can the TJA1028TK/3V3/10:1 regulator supply?
The integrated regulator in the TJA1028TK/3V3/10:1 can deliver up to 70 mA at 3.3 V according to the NXP product information. That capacity must include the combined load of any connected microcontroller, sensor, signal-conditioning circuit, and associated peripherals. Keep the total below the rated limit, provide suitable input and output decoupling, and verify thermal performance at the maximum ambient temperature and supply voltage.
Does TJA1028TK/3V3/10:1 support LIN 2.1 and automotive bus standards?
The TJA1028TK/3V3/10:1 supports LIN 2.0 and LIN 2.1 and is identified by NXP as compliant with SAE J2602 and ISO 17987-4:2016 for 12 V systems. The 10:1 suffix identifies the threshold configuration used with the LIN bus. These features make the device appropriate for compact vehicle-network nodes, while final EMC, system voltage, and qualification checks remain part of the complete automotive design process.
How should the TJA1028TK/3V3/10:1 be placed on a PCB?
Place the TJA1028TK/3V3/10:1 according to the NXP datasheet layout guidance, with the LIN connection and its protection network kept short and physically compact. Follow the prescribed input and output capacitor placement for the integrated regulator, provide a suitable ground reference, and connect the HVSON exposed pad as directed. The manufacturer layout example should be used as the baseline so the bus signal path, return path, and thermal pad remain electrically and mechanically consistent.

کے لیے انجینئرنگ ریفرنس ڈیٹا TJA1028TK/3V3/10:1 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the TJA1028TK/3V3/10:1 for a compact 12 V LIN node that requires both bus communication and a local 3.3 V rail of no more than 70 mA. Its integrated regulator reduces board area and assembly complexity compared with separate components, while LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 support suit vehicle-network applications. Select a same-footprint TJA1028 variant with a matching 10:1 threshold when an ordering or qualification suffix is required. Consider the 20:1 family option only after confirming the network's receiver and bus-waveform requirements. Likewise, choose a 5 V output variant when the connected load requires 5 V rather than 3.3 V. Do not use a different-package LIN transceiver as a drop-in solution, because PCB changes and pin-function verification would be required.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ TJA1028TK/3V3/10/2Z TJA1028TK/3V3/10/J TJA1028TK/3V3/20/J TJA1028TK/5V/10:1 TJA1028TK/5V/10/J
Package 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm) 8-HVSON (3 x 3 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Integrated Regulator Output 3.3 V 3.3 V 3.3 V 3.3 V 5.0 V 5.0 V
Integrated Regulator Current 70 mA 70 mA 70 mA 70 mA 70 mA 70 mA
Bus-Slope Threshold Ratio 10:1 10:1 10:1 20:1 10:1 10:1
Protocol Support LIN 2.0 and LIN 2.1 LIN 2.0 and LIN 2.1 LIN 2.0 and LIN 2.1 LIN 2.0 and LIN 2.1 LIN 2.0 and LIN 2.1 LIN 2.0 and LIN 2.1
12 V Bus Compliance SAE J2602 and ISO 17987-4:2016 SAE J2602 and ISO 17987-4:2016 SAE J2602 and ISO 17987-4:2016 SAE J2602 and ISO 17987-4:2016 SAE J2602 and ISO 17987-4:2016 SAE J2602 and ISO 17987-4:2016
Operating Temperature -40 °C to +150 °C -40 °C to +150 °C -40 °C to +150 °C -40 °C to +150 °C -40 °C to +150 °C -40 °C to +150 °C

اہم امتیازی خصوصیات

  • Combines LIN communication and local regulated power (بمقابلہStandalone LIN transceiver without an integrated regulator)
  • Uses the 10:1 LIN threshold configuration (بمقابلہTJA1028TK/3V3/20/J)
  • Supports the full automotive temperature range (بمقابلہTJA1028TK/5V/10:1)
  • Compact integration in an 8-HVSON footprint (بمقابلہDiscrete LIN transceiver and regulator implementation)

ڈیزائن نوٹس

Follow the NXP PCB layout pattern for the 8-HVSON device. Place the regulator input and output capacitors close to their associated pins, provide a short ground return, and connect the exposed thermal pad as specified. Keep the LIN trace and protection components away from sensitive signal paths. A compact bus connection reduces parasitic inductance and improves EMC behavior, particularly when the module is connected through long vehicle wiring.

Build the 3.3 V regulator budget from the 70 mA maximum specified for the TJA1028TK/3V3/10:1. Include microcontroller, sensor, status-indicator, and peripheral currents in the maximum-load case rather than average consumption. Use the 3.3 V output only for loads specified for that voltage, and separate any motor, lamp, or actuator drive stage from the low-voltage rail to prevent transients from disturbing the transceiver.

Use the manufacturer reference layout as the geometric baseline for pad placement, exposed-pad vias, and decoupling. Avoid routing LIN or switching-node copper beneath the exposed pad unless the datasheet explicitly permits it. Keep the ground path short and maintain a low-impedance return around the transceiver. Validate the assembled board for bus ringing, susceptibility, radiated emissions, and regulator stability across the expected supply and load range.

Do not select the 20:1 threshold family option as a silent substitute for the 10:1 device without confirming the network waveform and receiver detection requirements. Likewise, a 5 V output variant is not electrically interchangeable with this 3.3 V part when connected loads require the nominal 3.3 V rail. Confirm the complete ordering suffix, pin assignment, exposed-pad connection, and regulator load before releasing a replacement to production.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer identifies compliance with SAE J2602 and ISO 17987-4:2016 for 12 V LIN networks. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed for the selected orderable variant in the manufacturer compliance documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-18 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

TJA1028TK/3V3/10:1 datasheet TJA1028TK/3V3/10:1 pinout TJA1028TK/3V3/10:1 datasheet pdf TJA1028TK/3V3/10:1 price TJA1028TK/3V3/10:1 stock NXP TJA1028TK/3V3/10:1 TJA1028TK 3.3V 70mA regulator TJA1028TK 8-HVSON footprint TJA1028TK automotive LIN node TJA1028TK/3V3/10:1 replacement TJA1028TK/3V3/10:1 equivalent TJA1028TK/3V3/10:1 vs TJA1028TK/3V3/20/J TJA1028TK/3V3/10:1 application circuit

متعلقہ اجزاء اور اصطلاحات

NXP Semiconductors TJA1028TK/3V3/10:1 TJA1028TK/3V3/10/2Z TJA1028TK/3V3/10/J TJA1028TK/3V3/20/J TJA1028TK/5V/10:1 TJA1028TK/5V/10/J LIN transceiver Local Interconnect Network vehicle network transceiver integrated voltage regulator low-drop voltage regulator 3.3 V regulator 70 mA regulator output 10:1 bus-slope threshold LIN 2.0 LIN 2.1 SAE J2602 ISO 17987-4:2016 8-HVSON HVSON package family surface-mount package 12 V automotive network exposed pad automotive sensor node
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں