TJA1042ATK/3/0Z - 5Mbps CAN FD Transceiver | NXP
MPN: TJA1042ATK/3/0Z ✓ فعالTJA1042ATK/3/0Z جائزہ
A CAN transceiver is an interface IC that converts logic-level controller signals into differential CAN bus levels and reconstructs bus signals for the controller. Within the communication hierarchy, the TJA1042ATK/3/0Z belongs to the CAN transceiver class, interface ICs, wired-communication semiconductors, and automotive electronics. Its differential bus interface supports robust automotive networking while the transceiver handles electrical protection and bus interfacing.
Key characteristics include support for communication rates up to 5 Mbit/s, a 4.5 V to 5.5 V transceiver operating range, and a low-power Standby mode with bus wake-up capability. The automotive-grade version is identified as AEC-Q100 compliant in the product listing. Its 8-HVSON package uses an exposed pad to improve heat dissipation while keeping the PCB footprint compact.
The TJA1042 family is designed for reliable CAN and CAN FD communication with improved electromagnetic compatibility and electrostatic-discharge performance. The passive behavior of the bus pins when the device is unpowered helps a connected node avoid disrupting communication from other operating nodes. These characteristics are useful in distributed automotive and industrial control networks where cable length, electromagnetic interference, and partial power loss are important system considerations.
Typical applications include automotive body and chassis control modules, industrial CAN gateways, vehicle diagnostic interfaces, battery-management systems, and distributed automation controllers. A CAN protocol controller or MCU with an integrated CAN controller connects to the TJA1042 through TXD, RXD, and enable-related pins, while CANH and CANL connect to the bus through the network termination and protection scheme.
For PCB implementation, place the transceiver close to the CAN bus connector and keep the CANH and CANL traces short, symmetric, and free from switching nodes. Follow the manufacturer pin and layout guidance when connecting the exposed pad, supply decoupling, split-capacitor option, bus termination, and protection components. Account for the common-mode and transient-voltage environment of an automotive bus.
This page combines the exact ordering information, electrical envelope, automotive qualification, package details, drop-in alternatives, application guidance, and design considerations needed to evaluate the TJA1042ATK/3/0Z before PCB implementation or sourcing.
کے لیے ڈراپ اِن متبادل TJA1042ATK/3/0Z — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TJA1042ATK/3/0Z (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Low-Power Mode, Package, Product Type.
TJA1042TK/3/0Z
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TJA1042TK/3/1J
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TJA1042ATK/3/0Z تفصیلات
| Product Type | High-speed CAN and CAN FD transceiver |
| Maximum Data Rate | 5 Mbit/s |
| Transceiver Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Transceiver Supply | 5 V |
| Bus Interface | Two-wire differential CAN bus |
| Logic Interface | 5 V |
| Low-Power Mode | Standby mode with bus wake-up capability |
| Unpowered Behavior | Passive bus-pin behavior |
| Automotive Qualification | AEC-Q100 |
| آپریٹنگ جنکشن درجہ حرارت رینج | -40 °C to +150 °C |
| پیکیج | 8-HVSON exposed-pad package |
| Package Dimensions | 3 x 3 mm |
| پن کی تعداد | 8 pins |
| ماؤنٹنگ ٹائپ | Surface mount |
| Packaging | Tape and reel |
| Product Status | Active |
| Number of Transceivers per Package | 1 transceiver |
| Electromagnetic Compatibility | Improved EMC performance |
| Electrostatic Discharge Performance | Improved ESD performance |
TJA1042ATK/3/0Z 1 transceiver پن کنفیگریشن گائیڈ
TJA1042ATK/3/0Z (1 transceiver پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TJA1042ATK/3/0Z.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TJA1042ATK/3/0Z کے لیے موزوں ہے 6 ایپلیکیشنs: Automotive Body Control Module, Vehicle Diagnostic Gateway, Industrial CAN Gateway, Battery Management System, Distributed Automation Controller, Electric Vehicle Powertrain Controller.
Automotive Body Control Module
The TJA1042ATK/3/0Z fits an automotive body controller because it supports CAN and CAN FD communication up to 5 Mbit/s while operating from a 5 V supply. Its AEC-Q100 qualification, -40 °C to +150 °C junction-temperature range, improved EMC performance, and improved ESD performance suit demanding vehicle networks. The 8-HVSON 3 x 3 mm exposed-pad package also limits board area beside a microcontroller or CAN controller. Place the transceiver near the vehicle harness connector, use a balanced CANH/CANL route, and connect the exposed pad according to the manufacturer land-pattern guidance. The primary design trade-off is that the compact package offers less forgiving rework than a conventional SOIC-8 device.
تجویز کردہ
Vehicle Diagnostic Gateway
A diagnostic gateway can use the TJA1042ATK/3/0Z as the physical interface between a CAN protocol controller and a two-wire vehicle bus. The transceiver's 5 Mbit/s capability provides sufficient bandwidth for CAN FD diagnostics, while standby mode with bus wake-up capability supports systems that must remain low-power until network activity occurs. Its passive behavior when unpowered is particularly useful in mixed operating states because it helps avoid loading the bus. The engineer should define bus protection for automotive transients, follow the manufacturer's exposed-pad and decoupling layout, and confirm that the 4.5 V to 5.5 V operating range matches the controller rail.
تجویز کردہ
Industrial CAN Gateway
The TJA1042ATK/3/0Z is appropriate for an industrial CAN gateway that links a local controller with sensors, drives, or remote I/O modules. Its 5 Mbit/s maximum data rate supports high-speed CAN and CAN FD traffic, while the -40 °C to +150 °C junction-temperature range provides broad thermal headroom for rugged equipment. The compact 8-HVSON package is useful where connector routing and PCB space are constrained. Route the differential bus as a short pair, include termination and transient protection, and test electromagnetic compliance with the final cable and enclosure. Because this is an automotive-qualified CAN interface, harsh industrial use still requires appropriate input protection and qualification at the system level.
تجویز کردہ
Battery Management System
The TJA1042ATK/3/0Z can connect a battery-management controller to a CAN-based traction, charging, or energy-storage network. Its 5 Mbit/s capability allows efficient communication among battery modules, contactors, supervisory electronics, and a vehicle controller. Standby mode with bus wake-up capability supports systems that periodically sleep between activity periods, while passive unpowered behavior helps preserve bus communication during partial power loss. The 5 V transceiver supply must be derived from the battery-management electronics with appropriate regulation and transient rejection. Use a short CANH/CANL route, provide the specified bus protection, and use the exposed pad as directed for reliable thermal performance in a compact controller enclosure.
تجویز کردہ
Distributed Automation Controller
A distributed automation controller can use the TJA1042ATK/3/0Z when a compact, high-speed wired interface is needed between a real-time controller and field equipment. The 5 Mbit/s CAN capability supports deterministic message exchange among sensors and actuators, while standby mode limits consumption during inactive intervals. Its automotive-grade qualification and wide -40 °C to +150 °C junction-temperature range are beneficial in temperature-variable installations, although the complete product must satisfy its own industrial requirements. The 3 x 3 mm HVSON footprint reduces connector-adjacent board area, and the exposed pad helps remove heat. Confirm bus termination, fault protection, common-mode behavior, and firmware timing before deployment.
تجویز کردہ
Electric Vehicle Powertrain Controller
The TJA1042ATK/3/0Z can serve as the CAN interface in an electric-vehicle powertrain controller when the network is designed for high-speed CAN or CAN FD communication. The 5 Mbit/s limit supports controller-to-controller status, torque, fault, and diagnostic messages, while improved EMC and ESD performance address important automotive interface concerns. The compact exposed-pad package fits near the controller and connector, but thermal design must account for copper area and the pad connection specified by NXP. Use a protected two-wire bus layout and validate transient immunity, bus fault behavior, standby wake-up, and unpowered loading in the complete vehicle electrical environment.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TJA1042ATK/3/0Z — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | TJA1042TK/3/0Z | TJA1042TK/3/1 |
|---|---|---|---|
| Package | 8-HVSON (3 x 3 mm) | 8-HVSON (3 x 3 mm) | 8-HVSON (3 x 3 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
اہم امتیازی خصوصیات
- Compact automotive CAN interface footprint (بمقابلہTJA1042AT/3/0Z)
- High-speed CAN and CAN FD capability (بمقابلہTJA1042TK/3/0Z)
- Active high-temperature automotive positioning (بمقابلہTJA1042TK/3/1)
ڈیزائن نوٹس
Route CANH and CANL as a short, balanced differential pair between the transceiver and connector. Keep the pair away from switching power nodes, high-current returns, oscillators, and unprotected inductive loads. Place the TJA1042ATK/3/0Z near the bus entry and provide the termination and protection components identified by the manufacturer application guidance. This layout minimizes radiated emissions and susceptibility to external fields.
The 8-HVSON package exposes a thermal pad for heat removal, but its effectiveness depends on the PCB copper and via arrangement. Follow the manufacturer land pattern and exposed-pad connection instructions, and place thermal vias where specified without violating assembly or cleanliness requirements. Estimated: actual junction temperature depends on transceiver dissipation, ambient temperature, copper area, via count, and the board's thermal resistance; none of those system values are specified here.
Do not treat TJA1042ATK/3/0Z and TJA1042AT/3/0Z as interchangeable because their package constructions differ. The K ordering code denotes the HVSON 3 x 3 mm form, while the AT ordering code denotes the 8-SO form. Also verify whether SPLIT or VIO behavior is required before approving a family variant. The manufacturer's pin-description and ordering-information tables should control the schematic and layout review.
Provide a clean 5 V transceiver rail within the specified 4.5 V to 5.5 V range and place local decoupling close to the supply pins. Keep converter switching loops and high-current returns away from the CAN traces and transceiver ground path. Validate supply tolerance, startup behavior, standby transitions, and bus wake-up across the complete controller power sequence rather than checking only steady-state operation.
تعمیل کی معلومات
The product listing identifies TJA1042ATK/3/0Z as an automotive AEC-Q100 part. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer.