Texas Instruments

TLV2401CD - 16V, 5.5kHz MicroPower RRIO Op Amp | TI

MPN: TLV2401CD ✓ فعال
16 V Vdss 880 nA Id 8-pin SOIC (D) Package
MOQ: 1 |

TLV2401CD جائزہ

The Texas Instruments TLV2401CD is a single, micropower, rail-to-rail input/output operational amplifier rated for supply voltages up to 16 V, with a gain-bandwidth product of 5.5 kHz. The device is packaged in an 8-pin SOIC (D) package and is intended for low-power signal-conditioning applications that require rail-to-rail input and output operation.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2401 belongs to the rail-to-rail-input/output operational-amplifier family, where the input common-mode range and output swing extend toward the supply rails. This category combines signal amplification, impedance buffering, filtering, and closed-loop control functions within a general-purpose analog IC.

The most important feature of the TLV2401 is its low supply current. Texas Instruments describes the TLV2401 family as drawing approximately 880 nA per channel, making it suitable for battery-powered equipment where amplifier standby power materially affects operating time. The 5.5 kHz gain-bandwidth product supports low-frequency signal paths rather than high-speed communications, audio-frequency wideband amplification, or fast data acquisition.

Rail-to-rail inputs are valuable when sensor outputs can approach either supply rail. Rail-to-rail output operation similarly improves usable output swing in single-supply systems, although the datasheet's output-voltage limits must still be respected when driving loads. Reverse-battery protection is included in the family description, helping guard the amplifier against excessive input current caused by improper battery installation.

Typical uses include battery-powered sensing, portable instrumentation, low-frequency active filters, sensor conditioning, threshold detection, and embedded control loops. The 16 V maximum supply rating supports higher-voltage industrial systems, while the 8-pin SOIC package allows conventional surface-mount assembly and straightforward hand-soldering during prototyping.

The primary design trade-off is bandwidth versus power and flexibility. The 5.5 kHz gain-bandwidth product is adequate for slow sensor signals but can create excessive closed-loop gain error or phase margin concerns at higher frequencies. Designers should select feedback values and source impedances that preserve stability, while verifying input and output ranges at the actual supply voltage.

This product overview combines the manufacturer’s device identity and ordering information with package details, application guidance, drop-in replacement analysis, and practical considerations for implementing a low-power rail-to-rail analog signal chain.

کے لیے ڈراپ اِن متبادل TLV2401CD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

TLV2401IDG4

✅ ڈراپ-اِن
📦 SOIC-8 (D)
Industrial-temperature option extends the operating range beyond the TLV2401CD's 0 °C to 70 °C specification; remaining electrical differences require datasheet confirmation

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

TLV2401CD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Number of Channels 1 channel
Amplifier Type Single operational amplifier
Maximum Supply Voltage 16 V
Gain-Bandwidth Product 5.5 kHz
Supply Current per Channel 880 nA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Reverse-Battery Protection Supported
آپریٹنگ درجہ حرارت رینج 0 °C to 70 °C
پیکیج 8-pin SOIC (D)
ماؤنٹنگ ٹائپ Surface mount
آؤٹ پٹ کی قسم Rail-to-rail

TLV2401CD پن کنفیگریشن

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پن 1 OUT — Operational-amplifier output
پن 2 IN- — Inverting input
پن 3 IN+ — Non-inverting input
پن 4 V- — Negative supply or ground connection
پن 5 NC — Not connected
پن 6 NC — Not connected
پن 7 V+ — Positive supply input
پن 8 OUT — Operational-amplifier output

عام استعمالات

TLV2401CD کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Conditioning, Portable Instrumentation, Industrial Limit Detection, Low-Frequency Active Filtering, RS-485 Interface Signal Conditioning, Precision Current Monitoring.

🔋

Battery-Powered Sensor Conditioning

The TLV2401CD suits low-energy sensor interfaces because its approximately 880 nA supply current limits amplifier overhead when the battery source is only a few volts. Rail-to-rail inputs allow signals from resistive dividers, photocells, or slow analog sensors to use much of the available supply range without immediate input saturation. Configure the amplifier as a non-inverting or inverting stage with feedback values that keep closed-loop gain appropriate for the 5.5 kHz gain-bandwidth product. A capacitive load at the sensor or ADC input may require a series isolation resistor to prevent instability.

🧰

Portable Instrumentation

The TLV2401CD is appropriate for portable measurement equipment where each analog channel must consume very little power while handling slow sensor or transducer signals. Its single-channel 8-pin SOIC package simplifies routing, while rail-to-rail input and output behavior improves signal utilization in single-supply systems. The 5.5 kHz gain-bandwidth product is well matched to temperature, pressure, and position measurements that do not require wideband amplification. Designers should still account for input offset, bias current, noise, and output-load limits from the manufacturer datasheet when setting the minimum resolvable signal.

🏭

Industrial Limit Detection

A TLV2401CD threshold detector can compare a slowly changing process signal with a reference and generate a clean logic-level transition for downstream monitoring. Rail-to-rail inputs help accommodate signals spanning much of the single-supply range, and the approximately 880 nA operating current supports distributed, low-power monitoring nodes. The 5.5 kHz bandwidth provides margin for slow process dynamics without consuming the power of a high-speed amplifier. Verify input-referred offset and output logic-level compatibility at the selected supply voltage, especially near the decision threshold.

🔧

Low-Frequency Active Filtering

The TLV2401CD can implement low-frequency active filters in sensor and audio-control paths where the target signal bandwidth is well below 5.5 kHz. Rail-to-rail output operation provides useful swing in a single-supply design, and the low approximately 880 nA supply current benefits continuously powered monitoring equipment. Component tolerances and the amplifier's finite gain-bandwidth product affect filter cutoff and phase, so simulation should include realistic source and load impedities. Keep the connected load within the manufacturer-specified operating range and assess stability when driving sampling inputs.

🌐

RS-485 Interface Signal Conditioning

TLV2401CD can amplify or filter the slow, low-level signal presented to a communication interface without introducing a high quiescent-power burden. Its approximately 880 nA supply current is useful in distributed acquisition systems, and the 5.5 kHz bandwidth is appropriate for low-rate supervisory or control signals rather than high-speed data. A separate transceiver handles the physical RS-485 layer, so the amplifier should condition only the analog signal presented to its input. Confirm logic thresholds, supply levels, and isolation requirements before combining the analog and communication sections.

⚡

Precision Current Monitoring

The TLV2401CD can condition a scaled voltage derived from a shunt or current-sensing amplifier when the required bandwidth is low. Rail-to-rail input behavior helps preserve small signals in compact single-supply systems, while the 880 nA per-channel current supports power-constrained monitoring. The 5.5 kHz gain-bandwidth product is suitable for slow current trends and protection thresholds but not for high-bandwidth motor-current waveforms. Select external resistor values for the required current range, verify amplifier input limits, and ensure the upstream current-sense device operates within its own common-mode range.

What is the operating voltage of TLV2401CD?
The TLV2401CD supports single-supply operation up to 16 V, as identified on the Texas Instruments product page. The manufacturer describes the device as a single 16 V operational amplifier with rail-to-rail input and output behavior. Its low approximately 880 nA per-channel supply current makes it suitable for compact, battery-powered analog systems, although the minimum operating voltage and input/output limits must be confirmed in the manufacturer datasheet before design release.
What are the key specifications of TLV2401CD that engineers should know?
The TLV2401CD is a single-channel, 16 V maximum-supply operational amplifier with a 5.5 kHz gain-bandwidth product, rail-to-rail inputs and outputs, reverse-battery protection, and approximately 880 nA supply current per channel. Texas Instruments packages it in an 8-pin SOIC. According to the manufacturer product page, these characteristics position it for low-power sensor conditioning, buffering, filtering, and threshold-detection circuits rather than high-speed signal processing.
Where can I download the TLV2401CD datasheet PDF?
The official TLV2401CD datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tlv2401.pdf. The manufacturer product page for TLV2401 also provides the complete family documentation, ordering options, and parameter information. Use the manufacturer document for the authoritative pin description, recommended operating conditions, electrical characteristics, and application guidance before assigning PCB tracks or calculating circuit performance.
Where can I find the TLV2401CD pinout?
The TLV2401CD pinout is published in the pin-configuration section of the Texas Instruments TLV2401 family datasheet. The exact package is an 8-pin SOIC identified by suffix D, and the ordering page confirms eight pins. Use the package drawing and pin-description table together when assigning inputs, supply rails, output, and no-connect positions on the PCB.
What is the TLV2401CD circuit application?
The TLV2401CD circuit is commonly used for low-frequency signal conditioning because it combines a 5.5 kHz gain-bandwidth product with rail-to-rail inputs and outputs and approximately 880 nA supply current. According to Texas Instruments, the device can support sensor buffering, threshold detection, low-frequency filtering, and portable measurement systems. Its input common-mode range is especially useful when a sensor signal approaches a single-supply rail.
What can replace TLV2401CD?
TLV2401IDG4 is the closest documented same-package option because it belongs to the TLV2401 family, uses the 8-pin SOIC format, and extends operation into the industrial temperature range. The TLV2401CD is specified for 0 °C to 70 °C, whereas the IDG4 option is associated with the wider industrial-grade variant. Confirm the complete electrical limits and enable-pin configuration in the manufacturer documentation before substitution.
Is TLV2401CD the same as TLV2401IDG4?
TLV2401CD and TLV2401IDG4 are closely related 8-pin SOIC members of the TLV2401 family, but their temperature grades differ. TLV2401CD is specified for 0 °C to 70 °C, while the IDG4 part is the industrial-temperature option for harsher operating environments. The CD device may therefore be replaced only where its narrower temperature range is acceptable and the complete electrical specifications remain compatible.
TLV2401CD vs TLV2401IDG4 - which is better for industrial control?
TLV2401IDG4 is generally the better choice for industrial control when the enclosure temperature can fall below 0 °C or rise above 70 °C. TLV2401CD is optimized for the commercial 0 °C to 70 °C range, whereas the IDG4 version extends that operating envelope. Both use the same 8-pin SOIC family format, but engineers should still verify offset, bias, common-mode, output-swing, and stability behavior against the final circuit requirements.
When should I choose TLV2401CD over TLV2401IDG4?
Choose TLV2401CD when the circuit operates entirely between 0 °C and 70 °C and does not require the industrial temperature grade of TLV2401IDG4. The CD part is appropriate for consumer, educational, laboratory, or room-temperature industrial equipment. Choose the IDG4 version instead when low-temperature operation, high-temperature operation, or a wider production temperature margin is essential.
Is TLV2401CD suitable for battery-powered sensor interfaces?
Yes, the TLV2401CD is suitable for many battery-powered sensor interfaces because Texas Instruments specifies approximately 880 nA supply current per channel and a 5.5 kHz gain-bandwidth product. Rail-to-rail inputs are helpful when a sensor output lies near either supply rail. Battery life still depends on the sensor, load, feedback network, regulator efficiency, and the amplifier's output-load conditions.
How much power does the TLV2401CD consume?
At a 3.3 V supply with no additional load, the approximate amplifier supply power is 2.9 µW, calculated from 3.3 V multiplied by 880 nA. This is an estimate based on the manufacturer-described supply current and excludes output-stage load current, bias-network current, and board leakage. Actual consumption can increase when the output drives a resistive or capacitive load.
Can TLV2401CD drive a capacitive load?
The TLV2401CD can drive limited capacitive loads, but the stable capacitive-load limit depends on output current and gain, which are not stated in the available product summary. Use the manufacturer datasheet's recommended operating characteristics and the application guidance when connecting to ADC inputs, long cables, or sensor capacitance. High capacitive loading may require an isolation resistor to preserve stability.
What is the best Analog Devices equivalent for TLV2401CD?
No Analog Devices drop-in equivalent can be confirmed from the available cross-reference information. A replacement must use an 8-pin SOIC, preserve the amplifier pin arrangement, remain rail-to-rail at the intended supply voltage, and meet the circuit's bandwidth, offset, bias-current, output-swing, noise, and stability requirements. Treat any cross-brand candidate as a design-review item until its manufacturer datasheet confirms those conditions.
Where to buy TLV2401CD online?
Use the Request a Quote form on this page to inquire about TLV2401CD availability, order quantity, and delivery scheduling. The form allows the request to be routed without relying on static marketplace information that can change rapidly. For an approved purchase, also confirm the exact 8-pin SOIC suffix, quantity, delivery packaging, and commercial terms in the resulting quotation.
What is the price of TLV2401CD?
The current commercial terms for TLV2401CD are shown through the Request a Quote form on this page. The form is the appropriate route for price, stock, minimum order quantity, and lead-time confirmation because commercial availability can change independently of technical documentation. For design review, confirm that the quotation refers to the exact TLV2401CD 8-pin SOIC ordering suffix.
What is the lead time for TLV2401CD?
The current lead time for TLV2401CD should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, scheduled delivery packaging, factory allocation, and regional logistics. When requesting a quotation, include the required quantity, target delivery date, and whether reel, tray, tube, or bulk handling is needed so the supply response can be evaluated accurately.

کے لیے انجینئرنگ ریفرنس ڈیٹا TLV2401CD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose TLV2401CD when the application needs a single low-power rail-to-rail amplifier operating from a single supply up to 16 V, with approximately 880 nA supply current and a 5.5 kHz gain-bandwidth product. It is a strong fit for room-temperature battery-powered sensing, portable instrumentation, threshold detection, and low-frequency filtering. Choose TLV2401IDG4 when the same SOIC-8 family configuration is needed but the product must operate below 0 °C or above 70 °C. Neither option is appropriate when the signal path requires substantially more bandwidth or lower offset than the TLV2401 family provides. For cross-brand substitutions, require an exact 8-pin SOIC pinout match and validate supply range, rail-to-rail behavior, offset, bias current, output swing, noise, stability, and lifecycle requirements against the final design.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ TLV2401IDG4
Package SOIC-8 (D) SOIC-8 (D)
Brand Texas Instruments Texas Instruments
Number of Channels 1 channel 1 channel
Maximum Supply Voltage 16 V 16 V
Gain-Bandwidth Product 5.5 kHz 5.5 kHz
Supply Current per Channel 880 nA 880 nA
Input Common-Mode Range Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail
Operating Temperature Range 0 °C to 70 °C Industrial-temperature grade
Reverse-Battery Protection Supported Supported

اہم امتیازی خصوصیات

  • Lower operating temperature range than the industrial-grade family option (بمقابلہTLV2401IDG4)
  • Same core family performance in the same 8-pin SOIC footprint (بمقابلہTLV2401IDG4)
  • Commercial-temperature choice for cost-conscious room-temperature designs (بمقابلہTLV2401IDG4)

ڈیزائن نوٹس

Estimated: using a 3.3 V supply and the manufacturer-described 880 nA channel current, the amplifier's unloaded supply consumption is approximately 2.9 µW. Actual current rises with output load and external bias paths. In battery designs, include the sensor, regulator quiescent current, pull resistors, and any load in the complete power budget rather than treating the amplifier value as the entire system consumption.

Keep the 5.5 kHz gain-bandwidth product in perspective when selecting feedback resistors. Higher closed-loop gain reduces available bandwidth and can alter phase margin, particularly with source capacitance. Place the amplifier close to the source, use short feedback paths, and add a small series isolation resistor when driving an ADC or capacitive sensor input. Validate stability in simulation using the actual source and load models.

Place input and output components close to their corresponding pins to minimize sensitive-node area and trace capacitance. Provide a low-impedance ground reference, route supply current away from high-impedance inputs, and decouple the supply according to the manufacturer application guidance. The SOIC package permits straightforward rework, but thermal performance and input bias current can still affect precision measurements near the thermal limits.

Do not assume that rail-to-rail input and output labels mean every signal can reach either rail exactly. Consult the manufacturer output-swing and input common-mode limits at the actual supply voltage, and account for input offset when making threshold decisions. Avoid using the 880 nA supply-current figure as a load-current capability because output drive and input bias currents are separate specifications.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device is a general-purpose commercial-temperature operational amplifier rather than an automotive-qualified AEC-Q100 product. Specific environmental and material compliance statuses require confirmation from the manufacturer product documentation.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

tlv2401cd circuit TLV2401CD datasheet TLV2401CD pinout TLV2401CD datasheet pdf TLV2401CD equivalent TLV2401CD replacement TLV2401CD cross reference TLV2401CD vs TLV2401IDG4 TLV2401CD SOIC-8 footprint TLV2401CD price TLV2401CD stock Texas Instruments TLV2401CD

متعلقہ اجزاء اور اصطلاحات

Texas Instruments TLV2401CD TLV2401IDG4 TLV2401 Operational amplifier Op amp Single-supply operational amplifier Rail-to-rail input Rail-to-rail output MicroPower amplifier Low-dropout operational amplifier family Analog integrated circuit Signal conditioning Active filter Battery-powered sensor interface Portable instrumentation Reverse-battery protection 5.5 kHz gain-bandwidth product 880 nA supply current 16 V maximum supply voltage SOIC-8 SOIC package family Surface-mount package Common-mode range Input offset voltage Quiescent current INA240A1PW INA149AIDR TJA1057GTK/3Z
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں