Texas Instruments

TMS320C6652CZH6 - 600MHz DSP | Texas Instruments

MPN: TMS320C6652CZH6 ✓ فعال
FCBGA (CZH) Package 600 MHz Speed
MOQ: 1 |

TMS320C6652CZH6 جائزہ

Texas Instruments TMS320C6652CZH6 is a high-performance, cost-optimized, single-core C66x fixed- and floating-point digital signal processor rated at 600 MHz and packaged in a 625-pin FCBGA CZH package measuring 21 mm by 21 mm. It belongs to the TMS320C66x processor family and is intended for applications that require parallel fixed- and floating-point signal-processing performance in a complex system-on-chip design.

A digital signal processor is a semiconductor that executes mathematical operations on sampled data in real time. Unlike a general-purpose processor designed primarily for sequential software execution, a DSP is architected around predictable arithmetic, parallel data paths, and dedicated memory and I/O resources. Within the product hierarchy, the TMS320C6652 is a DSP, a programmable signal-processing processor, and a semiconductor designed for communications, industrial, imaging, and embedded control workloads.

The manufacturer identifies the device as a fixed- and floating-point processor with a 600 MHz C66x CPU core. Fixed-point arithmetic supports efficient integer and scaled-data processing, while floating-point arithmetic supports numerical workloads that require a wider dynamic range. This combination allows one processor to implement filtering, transforms, signal conditioning, control calculations, and other time-critical algorithms within a single processor architecture.

The TMS320C6652CZH6 also incorporates the C66x CorePac subsystem described in the manufacturer datasheet. Its integrated architecture is designed to support high-throughput signal-processing tasks while keeping algorithm execution close to high-speed serial and parallel interfaces. Exact memory capacity, interface configuration, clock requirements, voltage limits, and thermal ratings must be confirmed from the device datasheet and product ordering information before schematic capture.

Typical design uses include baseband processing in communications equipment, industrial signal acquisition, audio and media processing, imaging pipelines, radar-related signal processing, and real-time control. A 600 MHz clock is particularly relevant to filtering, spectral analysis, waveform generation, and communications workloads where throughput affects how many operations can be completed within a defined latency window.

Because the CZH package contains 625 balls, careful PCB design is essential. The land pattern, power architecture, decoupling strategy, routing rules, and thermal design must follow the manufacturer package information. Differential clock routing, controlled-length interfaces, solid ground distribution, and appropriate via structures are especially important in a high-speed digital system.

This page consolidates the confirmed 600 MHz processor rating, C66x fixed- and floating-point positioning, 625-ball FCBGA package, manufacturer documentation links, sourcing information, and drop-in-replacement assessment. It also separates confirmed catalog facts from parameters that require engineer verification, helping teams plan the processor platform before committing to a 625-ball layout.

کے لیے ڈراپ اِن متبادل TMS320C6652CZH6 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

TMS320C6652CZH6 تفصیلات

Product Type Fixed- and floating-point digital signal processor
Processor Core Single-core C66x
Clock Frequency 600 MHz
Arithmetic Support Fixed-point and floating-point
Architecture C66x CorePac subsystem
Package Type FCBGA (CZH)
Package Pin Count 625 pins
Package Dimensions 21 mm x 21 mm
ماؤنٹنگ ٹائپ Surface mount
Terminal Form Ball
Core Count 1 core
RoHS اسٹیٹس Compliant

TMS320C6652CZH6 21 mm x 21 mm پن کنفیگریشن گائیڈ

TMS320C6652CZH6 (21 mm x 21 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

TMS320C6652CZH6 کے لیے 21 mm x 21 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TMS320C6652CZH6.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

TMS320C6652CZH6 کے لیے موزوں ہے 6 ایپلیکیشنs: Communications Baseband Processing, Industrial Signal Acquisition, Audio and Media Processing, Machine Vision and Imaging, Radar Signal Processing, Real-Time Control Systems.

🌐

Communications Baseband Processing

The TMS320C6652CZH6 fits communications baseband designs that require a dedicated 600 MHz fixed- and floating-point processor for filtering, symbol processing, modulation, and other time-critical numerical operations. Its single-core C66x architecture allows signal-processing software to execute with predictable control over arithmetic precision. The 625-ball FCBGA CZH package provides a high pin count suitable for high-speed parallel and serial connectivity, but designers must verify lane assignments, clock requirements, and voltage domains against the device documentation. System partitioning should keep deterministic DSP loops on the processor while lower-rate control tasks use supporting logic.

🏭

Industrial Signal Acquisition

The TMS320C6652CZH6 can serve as the computational core of an industrial signal-acquisition system when sampled data must be filtered, transformed, and conditioned at high throughput. Its 600 MHz C66x core supports both scaled fixed-point operations suitable for many real-time filters and floating-point calculations suited to wider numerical ranges. Engineers should pair the processor with external data converters and interface circuitry after confirming supported input interfaces, clocking, and memory requirements. Because the CZH package is large and dense, power integrity, thermal management, and careful high-speed routing are central to maintaining repeatable acquisition performance.

🎧

Audio and Media Processing

The TMS320C6652CZH6 is applicable to audio, media, and speech-processing systems that combine sequential control with intensive real-time arithmetic. The 600 MHz C66x processor can support filtering, mixing, spectral processing, and fixed- or floating-point algorithms, depending on the system's accuracy and latency requirements. Its high-pin-count FCBGA package can expose substantial parallel connectivity for external memory and media data paths, although no pin-level compatibility should be assumed without consulting the official ball map. Board implementation should prioritize clean clock distribution, controlled-impedance routing, and separate analog and digital power management where the codec interface requires it.

📷

Machine Vision and Imaging

The TMS320C6652CZH6 can support machine-vision and imaging pipelines where captured frames require real-time filtering, feature extraction, enhancement, or dimensional analysis. The 600 MHz processor rate provides a defined performance basis for balancing algorithm complexity, data throughput, and latency. Its C66x CPU supports fixed- and floating-point programming, allowing the same platform to combine efficient datapath operations with more flexible numerical code. Before selecting it for a camera or sensor platform, verify the required sensor interface, memory bandwidth, DMA resources, and accelerator interaction in the datasheet. High-speed data routing and thermal design are as important as processor throughput.

✈️

Radar Signal Processing

The TMS320C6652CZH6 is suitable for radar and beam-forming signal-processing stages that require deterministic numerical execution, including filtering, fast transforms, correlation, and adaptive processing. The 600 MHz C66x core supports fixed- and floating-point implementations, enabling a design to match arithmetic precision to dynamic-range and sensitivity requirements. The processor should be placed within the data path after the appropriate radio-frequency conversion and antialiasing stages. Interface count, memory configuration, clock jitter tolerance, and package power requirements must be checked against the target radar architecture. Synchronization with high-speed converters and deterministic clock distribution are essential for repeatable phase and timing behavior.

🔧

Real-Time Control Systems

The TMS320C6652CZH6 can implement real-time control functions that combine feedback calculations with higher-throughput signal processing in industrial or embedded equipment. Its 600 MHz C66x processor allows control algorithms, observers, filters, and supervisory logic to be consolidated when the required peripherals, memory, and I/O are available. Fixed-point arithmetic can reduce computational overhead for common loop algorithms, while floating-point arithmetic supports models with broad numerical ranges. The design team should confirm interrupt latency, timer resources, communication peripherals, and watchdog behavior before committing to the platform. Power sequencing and deterministic reset behavior are especially important when the processor controls safety-relevant or multi-domain equipment.

What is the TMS320C6652CZH6?
The TMS320C6652CZH6 is a Texas Instruments single-core C66x digital signal processor operating at 600 MHz. It supports both fixed-point and floating-point arithmetic and is packaged in a 625-pin FCBGA CZH package measuring 21 mm by 21 mm. According to the manufacturer product page, the device is a high-performance, cost-optimized member of the TMS320C66x family.
What is the clock frequency of the TMS320C6652CZH6?
The TMS320C6652CZH6 has a rated processor clock frequency of 600 MHz. The manufacturer datasheet identifies the C6652 device at 600 MHz, while the closely related C6654 reaches up to 850 MHz. Confirm the supported clock, power-management states, and operating conditions in the datasheet before configuring clocks or calculating execution latency.
Where can I download the TMS320C6652CZH6 datasheet PDF?
The official TMS320C6652CZH6 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tms320c6652.pdf. The document covers the TMS320C6652 and TMS320C6654 family, including the C66x fixed- and floating-point core, CorePac subsystem, electrical characteristics, interfaces, and package information relevant to the CZH device.
What package does the TMS320C6652CZH6 use?
The TMS320C6652CZH6 uses the 625-pin FCBGA package identified as CZH, with dimensions of 21 mm by 21 mm. The part details published by Texas Instruments identify both the FCBGA designation and the 625-pin count. PCB engineers should use the manufacturer land-pattern and ball-assignment data when creating the footprint and escape routing.
Where is the TMS320C6652CZH6 pinout?
The TMS320C6652CZH6 pin and ball assignments are located in the pin-configuration and package sections of the official TMS320C6652 and TMS320C6654 datasheet. Because the CZH package contains 625 balls, engineers should assign every power, ground, signal, configuration, and reserved ball from the manufacturer table rather than inferring connectivity from another C66x package.
What can replace the TMS320C6652CZH6?
No verified pin-to-pin drop-in replacement for the TMS320C6652CZH6 is identified in the available cross-reference results. Because this is a 625-ball processor with software, power, interface, and clock dependencies, a replacement must match the CZH ball map, electrical limits, boot behavior, peripherals, and development software. Use the Request a Quote form on this page when requesting sourcing support.
Is the TMS320C6652CZH6 suitable for communications signal processing?
The TMS320C6652CZH6 is suitable for communications signal-processing designs that align with its 600 MHz C66x core and available high-speed interfaces. Fixed-point arithmetic supports efficient scaled-data pipelines, while floating-point arithmetic can simplify algorithms requiring a broad numerical range. Confirm the required serial interface, memory, clocking, and I/O bandwidth against the datasheet before finalizing the architecture.
TMS320C6652CZH6 vs TMS320C6654 — which processor should I choose?
Choose the TMS320C6652CZH6 when a 600 MHz C66x processor is sufficient and cost optimization is important; the related TMS320C6654 is rated up to 850 MHz according to the manufacturer datasheet. The processor choice also depends on software timing margins, power budget, available peripherals, memory configuration, and package support, so the higher clock rate alone should not determine the selection.
When should I choose the TMS320C6652CZH6 over another C66x processor?
Choose the TMS320C6652CZH6 when the design targets a single-core C66x implementation at 600 MHz and benefits from the cost-optimized TMS320C6652 product line. It is appropriate when software timing closes at that clock rate and its documented memory, peripherals, power inputs, and thermal limits satisfy the system. Higher-performance or different-package variants should be selected only when their additional capability is required.
Is the TMS320C6652CZH6 the same as the TMS320C6652CZH5?
The TMS320C6652CZH6 and TMS320C6652CZH5 have different orderable suffixes, but the exact electrical, temperature, or clock-related distinction must be checked against the manufacturer ordering table. The CZH6 is confirmed at 600 MHz in the product listing. Treat suffix changes as non-interchangeable until every datasheet parameter, package marking, and qualification attribute has been compared.
What is the best Texas Instruments equivalent for the TMS320C6652CZH6?
The best Texas Instruments equivalent must be selected from the same TMS320C6652 family and verified against the complete ordering table. A valid substitute must preserve the 625-ball CZH footprint, 600 MHz operating point, required boot and power behavior, memory interface, peripheral set, and software model. No additional drop-in alternative was established by the available cross-reference results.
How should power and decoupling be designed for the TMS320C6652CZH6?
Power and decoupling for the TMS320C6652CZH6 must follow the official CZH power-supply and decoupling guidance in the manufacturer datasheet. The design should provide the required core and I/O rails at the appropriate sequencing, place bulk and high-frequency decoupling capacitors near their designated supply balls, and use a low-impedance power and ground distribution system. Exact rail values and capacitor quantities must be taken from the device documentation.
Does the TMS320C6652CZH6 generate heat during operation?
The TMS320C6652CZH6 can dissipate power because its 600 MHz processor and high-speed I/O circuitry operate continuously, although a specific thermal figure cannot be confirmed from the available catalog listing. Use the manufacturer power-consumption and thermal-resistance data to estimate junction temperature, then provide the required PCB copper area and thermal relief according to the package guidelines.
How do I check the TMS320C6652CZH6 lifecycle and product status?
Texas Instruments currently presents the TMS320C6652 and the TMS320C6652CZH6 as orderable product information, and the manufacturer part-details page is the appropriate status source. For a production release, check the ordering table, lifecycle status, quality documents, and any product-change notifications directly with the manufacturer. Use the Request a Quote form on this page for current lead-time and assembly-lot questions.
What are the key specifications of TMS320C6652CZH6 that engineers should know?
The confirmed headline specifications of the TMS320C6652CZH6 are a 600 MHz single-core C66x processor, fixed- and floating-point arithmetic support, and a 625-pin FCBGA CZH package measuring 21 mm by 21 mm. Texas Instruments describes it as a high-performance, cost-optimized C66x processor. The official datasheet should be consulted for memory, I/O, voltage, power, thermal, and pin-assignment details.
Where can I buy TMS320C6652CZH6 online and what is its lead time?
Use the Request a Quote form on this page to request the TMS320C6652CZH6, current lead time, minimum order quantity, and available shipment configuration. The device is listed as a 625-ball, 600 MHz C66x DSP by Texas Instruments. Procurement should confirm authorized channel status, date codes, factory sealing, and whether the required quantity is available before placing a production order.

کے لیے انجینئرنگ ریفرنس ڈیٹا TMS320C6652CZH6 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the TMS320C6652CZH6 when the design requires a single-core C66x processor with a 600 MHz operating target, fixed- and floating-point arithmetic, and a 625-ball CZH footprint. It is a sensible cost-optimized choice when timing analysis closes at 600 MHz and the required memory, communication peripherals, clocking, and boot behavior are supported by the device. Consider a higher-clock C66x variant only when workload measurements show insufficient schedule margin. A lower-pin-count package may simplify routing, but it is not a drop-in substitute for this CZH design. Because no verified drop-in alternative was established, replacement decisions should focus on complete ball-map, electrical, firmware, and tooling compatibility rather than nominal processor type or clock speed alone.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand Texas Instruments
Package 625-pin FCBGA (CZH), 21 mm x 21 mm
Processor Type Single-core C66x digital signal processor
Clock Frequency 600 MHz
Arithmetic Fixed-point and floating-point
Architecture C66x CorePac subsystem
Pin Count 625 pins
RoHS Status Compliant
Terminal Form Ball
Mounting Type Surface mount

اہم امتیازی خصوصیات

  • Dedicated fixed- and floating-point processing at 600 MHz (بمقابلہGeneral-purpose processors with different architectures)
  • Cost-optimized C66x platform positioning (بمقابلہTMS320C6654)
  • High-density integrated connectivity (بمقابلہLower-pin-count processor packages)

ڈیزائن نوٹس

Create the PCB footprint directly from the manufacturer CZH land-pattern and ball-assignment documentation. The 21 mm by 21 mm FCBGA has 625 balls, so escape routing must be planned before component placement and routing closure. Use the prescribed via and pad geometry, maintain the specified ball-pitch layout, and do not substitute a generic 625-ball footprint based only on the ball count.

Implement the core and I/O power architecture, sequencing, and return paths exactly as described in the official datasheet and hardware design guidelines. Place required bulk and high-frequency decoupling capacitance close to the associated supply balls, provide adequate current capacity for the 600 MHz operating state, and keep sensitive power-distribution networks isolated from noisy switching nodes. Confirm rail limits, tolerance, ramp requirements, and power-up behavior rather than estimating them.

Treat the CZH package as a major thermal-design element. Use the manufacturer power-consumption and thermal-resistance figures to calculate worst-case dissipation under the required clock and I/O activity, then apply the documented PCB thermal-relief and copper recommendations. A small enclosure, elevated ambient temperature, or reduced airflow can make board construction a limiting factor even when the processor itself is within its operating specification.

Route clocks and high-speed interfaces as controlled-impedance nets, using the shortest practical paths and continuous reference planes. Keep the processor, memory, and external converters in a deliberate topology that minimizes via transitions on critical routes. Decoupling connections must use low-impedance paths, while power, ground, and signal returns should be evaluated for loop area and plane discontinuities before signal-integrity signoff.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The catalog listing identifies the device as RoHS compliant. No qualification, lead-free, halogen-free, REACH, or conflict-minerals statements were confirmed for this orderable MPN.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-15 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

TMS320C6652CZH6 datasheet TMS320C6652CZH6 pinout TMS320C6652CZH6 datasheet pdf TMS320C6652CZH6 specifications TMS320C6652CZH6 footprint TMS320C6652CZH6 equivalent TMS320C6652CZH6 replacement TMS320C6652CZH6 cross reference TMS320C6652CZH6 price TMS320C6652CZH6 stock Texas Instruments TMS320C6652CZH6 TMS320C6652 600MHz DSP TMS320C6652CZH6 625 FCBGA TMS320C6652 communications DSP TMS320C6652CZH6 vs TMS320C6654

متعلقہ اجزاء اور اصطلاحات

Texas Instruments TMS320C6652CZH6 TMS320C6652 TMS320C6654 C66x CorePac C66x CPU core digital signal processor DSP fixed-point arithmetic floating-point arithmetic FCBGA CZH package 625-ball package surface-mount semiconductor communications baseband processing industrial signal acquisition audio signal processing machine vision radar signal processing real-time control 600 MHz 21 mm by 21 mm package RoHS high-speed digital design
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں