TS5L100D - 4-Channel 5V SPDT LAN Switch | Texas Instruments
MPN: TS5L100D ✓ فعالTS5L100D جائزہ
A LAN switch is an analog signal-routing component used to select between two signal paths on each channel. In the TS5L100D, four independent SPDT channels share a single enable control, making the device suitable for systems that need synchronized routing of multiple differential or single-ended network-related signals. The common enable architecture reduces the number of control inputs required when all channels must change state together.
The primary design benefits of the TS5L100D are its 4-channel integration, 5 V supply operation, 2:1 SPDT configuration, and low on-state resistance. Combining four switch elements in one 16-SOIC package can simplify board planning compared with four discrete SPDT packages. Low on-state resistance helps preserve signal integrity when the switch is inserted into a transmission path, while the wide-bandwidth positioning makes the device relevant to LAN signal-routing designs.
The TS5L100D is used when a design requires multiplexing or demultiplexing across multiple related channels rather than independent routing of unrelated signals. Common applications include network-interface signal selection, test and measurement signal-path routing, communication equipment, and embedded systems that must switch between two external signal sources. The shared enable input is particularly useful when paired or grouped channels need coordinated selection.
For layout, place the device near the signal paths it serves and route the four channels consistently to minimize trace-length differences and unintended coupling. Keep the enable trace short and away from high-energy switching nodes. Confirm the exact pin assignments, recommended supply bypassing, control thresholds, insertion loss, bandwidth, and operating-temperature limits in the manufacturer datasheet before finalizing a production board.
This product page organizes the TS5L100D function, package information, sourcing path, comparison points, and application guidance into one engineering reference. It also highlights the important trade-off between integration and board flexibility: the four-channel common-enable architecture is efficient for coordinated LAN routing, while designers needing independently controlled or differently configured paths should confirm that the shared-control arrangement matches the system architecture.
کے لیے ڈراپ اِن متبادل TS5L100D — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
TS5L100DR
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PI5A100W
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TS5L100D زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 4-channel 2:1 SPDT LAN switch |
| سپلائی وولٹیج | 5 V |
| Number of Channels | 4 channels |
| Switch Configuration | SPDT, 2:1 |
| فنکشن | 1-of-2 multiplexer/demultiplexer |
| Enable Inputs | 1 common switch-enable input |
| On-State Resistance | Low on-state resistance |
| Bandwidth | Wide bandwidth |
| پیکیج | 16-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount |
| پن کی تعداد | 16 pins |
| Interface Category | LAN switch |
| Control Architecture | Common enable for four channels |
TS5L100D 16-pin soic پن کنفیگریشن گائیڈ
TS5L100D (16-pin soic پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TS5L100D.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TS5L100D کے لیے موزوں ہے 6 ایپلیکیشنs: LAN Interface Signal Routing, Ethernet PHY Signal Multiplexing, Test and Measurement Signal Paths, Communication Equipment Routing, Embedded Network Interface Selection, Instrumentation Signal Multiplexing.
LAN Interface Signal Routing
The TS5L100D fits coordinated LAN signal routing because it combines four 2:1 SPDT channels in one 16-SOIC package and operates from 5 V. Each channel can select between two signal routes, while one common enable input coordinates the four switching elements. This arrangement is useful in network-interface equipment where several related signals must follow a common routing decision. Low on-state resistance supports signal-path integrity, while the wide-bandwidth LAN-switch positioning is relevant for data-rate validation against the exact datasheet limits.
تجویز کردہ
Ethernet PHY Signal Multiplexing
The TS5L100D can support multiplexing or demultiplexing around an Ethernet physical-layer signal path when two source or destination options must be selected. Four channels provide a consistent mechanism for switching related pairs or groups, and the shared enable input simplifies coordinated state changes. Its 5 V supply aligns with many communication boards, while low on-state resistance helps limit added loss in the selected path. The final design must verify insertion loss, return loss, bandwidth, and isolation against the required Ethernet standard.
تجویز کردہ
Test and Measurement Signal Paths
The TS5L100D is suitable for test and measurement equipment that must route one signal toward either of two destinations. Four channels in a single package can organize repeated routing decisions and reduce the physical footprint compared with multiple discrete switches. The common enable control is valuable when an instrument changes several signal paths simultaneously, while the 5 V operation supports integration into conventional control and analog boards. Engineers should verify signal amplitude, bandwidth, on-resistance, and channel timing before finalizing the test fixture.
تجویز کردہ
Communication Equipment Routing
TS5L100D can be used in communication equipment to multiplex or demultiplex grouped network-related signals through a compact analog switch stage. Its four-channel 2:1 architecture allows two route options per channel, and the single enable input provides a straightforward mechanism for coordinated selection. The low on-state resistance is important because every inserted switch contributes loss to the transmitted signal, particularly at higher data rates. Confirm the manufacturer's bandwidth and isolation curves against the channel loss budget used by the communication architecture.
تجویز کردہ
Embedded Network Interface Selection
The TS5L100D fits embedded network-interface designs that need to select between two signal paths on each of four channels. Integrating the switches into one 16-SOIC package supports controlled PCB area, and the 5 V supply simplifies integration with systems that already operate from a 5 V rail. The common enable input is especially useful for switching grouped network signals under firmware control. Designers should account for control timing, simultaneous channel switching, and the exact electrical characteristics listed in the manufacturer datasheet.
تجویز کردہ
Instrumentation Signal Multiplexing
TS5L100D can be applied in instrumentation systems where multiple measured or controlled signals must be selected between two route options. The four-channel structure provides repeatable routing organization, and the common enable input allows all channels to transition under one control command. Low on-state resistance helps preserve signal level through the selected branch, while the wide-bandwidth LAN-switch description makes it a candidate for higher-speed instrumentation links. Confirm noise, capacitance, channel isolation, and timing margins in the target measurement chain.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TS5L100D — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | TS5L100DR | PI5A100W |
|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | PI5A100W |
| Product Type | 4-channel 2:1 SPDT LAN switch | TS5L100 family 4-channel LAN switch | LAN switch |
| Pin Count | 16 pins | 16 pins | 16 pins |
اہم امتیازی خصوصیات
- Four coordinated LAN routing channels in one package (بمقابلہPI5A100W)
- Established Texas Instruments family ordering path (بمقابلہPI5A100W)
- Low-resistance wide-bandwidth signal switching (بمقابلہTS5L100DR)
ڈیزائن نوٹس
Route the four switched channels as a consistent signal group and keep their geometry similar to minimize channel-to-channel skew and impedance variation. Place the TS5L100D close to the connector, PHY, or destination circuitry that defines the signal path. A compact placement can reduce trace loss and coupling, but do not compromise the return path or the required bypass-capacitor placement.
Use the manufacturer bandwidth, insertion-loss, off-isolation, capacitance, and on-resistance curves to complete the channel budget. Low on-state resistance helps reduce conductive loss, but total link loss also includes PCB traces, connectors, return paths, and the selected switch state. Confirm that the four channels meet the required bandwidth and isolation at the highest data rate rather than relying only on the 'wide bandwidth' product description.
Do not assume that the four channels can be controlled independently: the TS5L100D uses one common switch-enable input. If a design requires individual channel selection, use a different architecture or add external control. Also confirm the pin names, enable polarity, and electrical limits directly from the TI TS5L100 datasheet before assigning PCB nets.
Follow the datasheet's recommended supply bypassing and component-placement guidance for the 5 V rail. Keep the input capacitor and grounding path close to the device, and use a low-impedance ground reference to avoid coupling supply noise into the selected signal path. Because detailed supply-current limits are not stated in the available product summaries, base the rail design on the manufacturer electrical-characteristics table.
تعمیل کی معلومات
Compliance status is not stated in the retrieved product summaries. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the current Texas Instruments product documentation.