TS5L100D - 4-Channel 5V SPDT LAN Switch | Texas Instruments
料号: TS5L100D ✓ 量产中TS5L100D 概述
A LAN switch is an analog signal-routing component used to select between two signal paths on each channel. In the TS5L100D, four independent SPDT channels share a single enable control, making the device suitable for systems that need synchronized routing of multiple differential or single-ended network-related signals. The common enable architecture reduces the number of control inputs required when all channels must change state together.
The primary design benefits of the TS5L100D are its 4-channel integration, 5 V supply operation, 2:1 SPDT configuration, and low on-state resistance. Combining four switch elements in one 16-SOIC package can simplify board planning compared with four discrete SPDT packages. Low on-state resistance helps preserve signal integrity when the switch is inserted into a transmission path, while the wide-bandwidth positioning makes the device relevant to LAN signal-routing designs.
The TS5L100D is used when a design requires multiplexing or demultiplexing across multiple related channels rather than independent routing of unrelated signals. Common applications include network-interface signal selection, test and measurement signal-path routing, communication equipment, and embedded systems that must switch between two external signal sources. The shared enable input is particularly useful when paired or grouped channels need coordinated selection.
For layout, place the device near the signal paths it serves and route the four channels consistently to minimize trace-length differences and unintended coupling. Keep the enable trace short and away from high-energy switching nodes. Confirm the exact pin assignments, recommended supply bypassing, control thresholds, insertion loss, bandwidth, and operating-temperature limits in the manufacturer datasheet before finalizing a production board.
This product page organizes the TS5L100D function, package information, sourcing path, comparison points, and application guidance into one engineering reference. It also highlights the important trade-off between integration and board flexibility: the four-channel common-enable architecture is efficient for coordinated LAN routing, while designers needing independently controlled or differently configured paths should confirm that the shared-control arrangement matches the system architecture.
直接替换替代料: TS5L100D ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
TS5L100DR
✅ 直接替换📋 参考替代料(不在目录中)
PI5A100W
✅ 直接替换📋 参考替代料(不在目录中)
TS5L100D 最大额定值与电气特性
| Product Type | 4-channel 2:1 SPDT LAN switch |
| 电源电压 | 5 V |
| Number of Channels | 4 channels |
| Switch Configuration | SPDT, 2:1 |
| 功能 | 1-of-2 multiplexer/demultiplexer |
| Enable Inputs | 1 common switch-enable input |
| On-State Resistance | Low on-state resistance |
| Bandwidth | Wide bandwidth |
| 封装 | 16-pin SOIC |
| 安装类型 | Surface mount |
| 引脚数量 | 16 pins |
| Interface Category | LAN switch |
| Control Architecture | Common enable for four channels |
TS5L100D 16-pin soic 引脚配置指南
TS5L100D(16-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: TS5L100D.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TS5L100D 适用于 6 应用s: LAN Interface Signal Routing, Ethernet PHY Signal Multiplexing, Test and Measurement Signal Paths, Communication Equipment Routing, Embedded Network Interface Selection, Instrumentation Signal Multiplexing.
LAN Interface Signal Routing
The TS5L100D fits coordinated LAN signal routing because it combines four 2:1 SPDT channels in one 16-SOIC package and operates from 5 V. Each channel can select between two signal routes, while one common enable input coordinates the four switching elements. This arrangement is useful in network-interface equipment where several related signals must follow a common routing decision. Low on-state resistance supports signal-path integrity, while the wide-bandwidth LAN-switch positioning is relevant for data-rate validation against the exact datasheet limits.
推荐
Ethernet PHY Signal Multiplexing
The TS5L100D can support multiplexing or demultiplexing around an Ethernet physical-layer signal path when two source or destination options must be selected. Four channels provide a consistent mechanism for switching related pairs or groups, and the shared enable input simplifies coordinated state changes. Its 5 V supply aligns with many communication boards, while low on-state resistance helps limit added loss in the selected path. The final design must verify insertion loss, return loss, bandwidth, and isolation against the required Ethernet standard.
推荐
Test and Measurement Signal Paths
The TS5L100D is suitable for test and measurement equipment that must route one signal toward either of two destinations. Four channels in a single package can organize repeated routing decisions and reduce the physical footprint compared with multiple discrete switches. The common enable control is valuable when an instrument changes several signal paths simultaneously, while the 5 V operation supports integration into conventional control and analog boards. Engineers should verify signal amplitude, bandwidth, on-resistance, and channel timing before finalizing the test fixture.
推荐
Communication Equipment Routing
TS5L100D can be used in communication equipment to multiplex or demultiplex grouped network-related signals through a compact analog switch stage. Its four-channel 2:1 architecture allows two route options per channel, and the single enable input provides a straightforward mechanism for coordinated selection. The low on-state resistance is important because every inserted switch contributes loss to the transmitted signal, particularly at higher data rates. Confirm the manufacturer's bandwidth and isolation curves against the channel loss budget used by the communication architecture.
推荐
Embedded Network Interface Selection
The TS5L100D fits embedded network-interface designs that need to select between two signal paths on each of four channels. Integrating the switches into one 16-SOIC package supports controlled PCB area, and the 5 V supply simplifies integration with systems that already operate from a 5 V rail. The common enable input is especially useful for switching grouped network signals under firmware control. Designers should account for control timing, simultaneous channel switching, and the exact electrical characteristics listed in the manufacturer datasheet.
推荐
Instrumentation Signal Multiplexing
TS5L100D can be applied in instrumentation systems where multiple measured or controlled signals must be selected between two route options. The four-channel structure provides repeatable routing organization, and the common enable input allows all channels to transition under one control command. Low on-state resistance helps preserve signal level through the selected branch, while the wide-bandwidth LAN-switch description makes it a candidate for higher-speed instrumentation links. Confirm noise, capacitance, channel isolation, and timing margins in the target measurement chain.
推荐
推荐产品汇总
工程参考数据: TS5L100D ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TS5L100DR | PI5A100W |
|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | PI5A100W |
| Product Type | 4-channel 2:1 SPDT LAN switch | TS5L100 family 4-channel LAN switch | LAN switch |
| Pin Count | 16 pins | 16 pins | 16 pins |
关键差异点
- Four coordinated LAN routing channels in one package (对比 PI5A100W)
- Established Texas Instruments family ordering path (对比 PI5A100W)
- Low-resistance wide-bandwidth signal switching (对比 TS5L100DR)
设计说明
Route the four switched channels as a consistent signal group and keep their geometry similar to minimize channel-to-channel skew and impedance variation. Place the TS5L100D close to the connector, PHY, or destination circuitry that defines the signal path. A compact placement can reduce trace loss and coupling, but do not compromise the return path or the required bypass-capacitor placement.
Use the manufacturer bandwidth, insertion-loss, off-isolation, capacitance, and on-resistance curves to complete the channel budget. Low on-state resistance helps reduce conductive loss, but total link loss also includes PCB traces, connectors, return paths, and the selected switch state. Confirm that the four channels meet the required bandwidth and isolation at the highest data rate rather than relying only on the 'wide bandwidth' product description.
Do not assume that the four channels can be controlled independently: the TS5L100D uses one common switch-enable input. If a design requires individual channel selection, use a different architecture or add external control. Also confirm the pin names, enable polarity, and electrical limits directly from the TI TS5L100 datasheet before assigning PCB nets.
Follow the datasheet's recommended supply bypassing and component-placement guidance for the 5 V rail. Keep the input capacitor and grounding path close to the device, and use a low-impedance ground reference to avoid coupling supply noise into the selected signal path. Because detailed supply-current limits are not stated in the available product summaries, base the rail design on the manufacturer electrical-characteristics table.
合规信息
Compliance status is not stated in the retrieved product summaries. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations using the current Texas Instruments product documentation.