STMicroelectronics

TS902IDT - Dual 1.4MHz Rail-to-Rail Op Amp | STMicroelectronics

MPN: TS902IDT ✗ اختتامِ زندگی
Rail-to-rail Vdss 0.00015 µA Id 14-pin small-outline package (SO14) Package
MOQ: 1 |

TS902IDT جائزہ

The STMicroelectronics TS902IDT is a dual general-purpose CMOS operational amplifier with rail-to-rail input and output voltage ranges, a 1.4 MHz gain-bandwidth product, and a low-power standby mode drawing 0.5 µA. The device is offered in the TS902IDT tape-and-reel configuration in a 14-pin small-outline package. Its dual amplifier arrangement provides two independent signal-conditioning channels in one package.

A rail-to-rail operational amplifier is an amplifier whose input common-mode and output voltage ranges can extend close to the positive and negative supply rails. This makes the TS902 useful for low-voltage systems in which the signal can occupy much of the available supply voltage. In the broader device hierarchy, the TS902 is a dual CMOS operational amplifier, placing it within analog and mixed-signal integrated-circuit designs.

The TS902IDT provides a 1.4 MHz gain-bandwidth product for general-purpose amplification at moderate frequencies. Its rail-to-rail input stage supports signal acquisition close to the supply limits, while the rail-to-rail output stage improves output-voltage range. A standby position reduces consumption to 0.5 µA and places the outputs in a high-impedance state, helping conserve power when the amplifier is not actively processing signals.

The TS902IDT is specified for a temperature range of -40 °C to +125 °C. One retrieved technical listing identifies a maximum input offset voltage of 12 mV, while another reports a low bias current of 0.00015 µA. These figures support applications involving sensor interfaces, low-level signal conditioning, and battery-operated instrumentation where offset and input current are important selection criteria.

Typical uses include portable sensor conditioning, industrial measurement, audio preamplification, low-voltage control systems, and current-feedback around transducers. The SOIC-14 package also permits a conventional surface-mount PCB layout with adequate separation between the two amplifier channels.

Designers should account for the 12 mV maximum input offset when the application requires accurate DC measurements. Input and output stability must be evaluated with the selected feedback network and load, while supply bypassing should follow the manufacturer recommendations. The standby function should be driven only with signals that remain compatible with its defined logic levels.

This product page combines package, temperature, frequency, offset, and power information with application-oriented engineering guidance. It also identifies the verified documentation links and explains the limits of the available drop-in replacement cross-reference, helping engineers distinguish a true pin-compatible substitution from a merely similar amplifier.

کے لیے ڈراپ اِن متبادل TS902IDT — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TS902IDT (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Amplifier Type, Operating Temperature Range, Package, Standby Current, Standby Output State.

STMicroelectronics
Amplifier Type: Dual operational amplifier
Operating Temperature Range: -40C to +125C
Package: SOIC-14 (SO14), surface mount
موازنہ کریں TS902IDT →

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

TS902IDT زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Amplifier Type Dual general-purpose CMOS operational amplifier
Number of Amplifiers 2 channels
Gain-Bandwidth Product 1.4 MHz
Input Common-Mode Range Rail-to-rail
آؤٹ پٹ وولٹیج کی حد Rail-to-rail
Maximum Input Offset Voltage 12 mV
Input Bias Current 0.00015 µA
Standby Current 0.5 µA
Standby Output State High impedance
آپریٹنگ درجہ حرارت رینج -40 °C to +125 °C
پیکیج 14-pin small-outline package (SO14)
Delivery Configuration Tape and reel (DT)
ماؤنٹنگ ٹائپ Surface mount
Technology CMOS
Maximum Supply Voltage 8 V
Power-Supply Operation Single or dual supply
Automotive Temperature Grade -40 °C to +125 °C

TS902IDT 14-pin small-outline package (so14) پن کنفیگریشن گائیڈ

TS902IDT (14-pin small-outline package (so14) پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔

TS902IDT کے لیے 14-pin small-outline package (so14) پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TS902IDT.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

TS902IDT کے لیے موزوں ہے 6 ایپلیکیشنs: Low-Power Sensor Signal Conditioning, Portable Measurement Instrumentation, Audio Preamplification, Industrial Control and Actuator Interfaces, Battery-Powered IoT Sensing, Battery Charging and Power Monitoring.

🧩

Low-Power Sensor Signal Conditioning

The TS902IDT suits battery-operated sensing systems in which the sensor output can occupy much of the available supply range. Its rail-to-rail input range reduces the need for midrail biasing, while the 1.4 MHz gain-bandwidth product is more than adequate for slow temperature, pressure, and position signals. The reported 0.00015 µA input bias current limits loading on high-impedance sources, and the 0.5 µA standby current supports periodic measurement cycles. Use the amplifier in a non-inverting or differential conditioning stage, and verify that the sensor’s output range remains compatible with the device’s common-mode and supply limits.

🔧

Portable Measurement Instrumentation

Portable meters and field-measurement products can use the TS902IDT to amplify low-level sensor signals without a midrail virtual ground. The rail-to-rail output makes the amplifier useful with single-supply analog-to-digital converters whose useful input span approaches the supply rail. Its 1.4 MHz gain-bandwidth product supports moderate-bandwidth filtering and gain stages, while the industrial temperature range of -40 °C to +125 °C supports wider ambient environments. Confirm the selected ADC’s input range, configure gain carefully because the maximum input offset is 12 mV, and account for the amplifier’s output swing when designing the final reference and gain network.

🎧

Audio Preamplification

The TS902IDT can serve as a general-purpose dual preamplifier in small audio modules, microphone interfaces, and active transducers. Two amplifiers in one 14-pin package can handle left and right channels or two stages of a signal path, reducing board area compared with separate single amplifiers. Rail-to-rail input and output operation improves signal utilization in low-voltage systems, and the 1.4 MHz gain-bandwidth product is suitable for the wide audio-band signals common to consumer audio. The device is not characterized here as a low-noise audio-grade part, so microphone noise, distortion, input impedance, and channel matching must be evaluated before using it in a precision audio path.

🏭

Industrial Control and Actuator Interfaces

The TS902IDT is useful for buffering sensor and control signals in industrial equipment where single-supply operation simplifies power distribution. Rail-to-rail input capability permits direct connection to sensors biased near either supply rail, while the rail-to-rail output can drive a following converter or analog control stage. The -40 °C to +125 °C temperature range is appropriate for many industrial environments, but the maximum offset of 12 mV must be included in control-loop error analysis. Keep feedback traces short, provide local supply bypassing, and verify output loading because general-purpose rail-to-rail amplifiers can exhibit reduced drive or increased distortion near the output rails.

🧩

Battery-Powered IoT Sensing

The TS902IDT can condition outputs from low-energy IoT sensors while remaining compatible with compact single-supply systems. Its rail-to-rail input range avoids wasting signal span, and the standby mode reduces consumption to 0.5 µA when measurements are paused. The 1.4 MHz bandwidth is more than sufficient for many environmental and occupancy sensors, while dual-channel packaging allows two sensor inputs to share one IC. A practical design should include a defined shutdown level, ensure the sensor cannot back-power the output during standby, and confirm that leakage from surrounding circuitry does not dominate the 0.5 µA supply current.

⚡

Battery Charging and Power Monitoring

The TS902IDT can amplify the voltage and current signals used to monitor a battery-powered subsystem. Rail-to-rail operation allows sensing near the low end of a single-supply rail, and the dual-channel architecture can compare a battery signal with a reference or amplify two related measurements. The amplifier’s standby current of 0.5 µA is useful when the monitor is sampled infrequently, although the surrounding divider, switches, and protection components can consume more current than the amplifier itself. Use low-leakage input components, account for the 12 mV maximum offset in calibration, and verify the common-mode limits before the battery voltage can fall below the measurement range.

What is the TS902IDT?
The TS902IDT is a dual general-purpose CMOS operational amplifier with rail-to-rail input and output ranges and a 1.4 MHz gain-bandwidth product. According to the STMicroelectronics TS902 datasheet, it accepts single- or dual-supply operation and includes a standby mode that reduces current consumption to 0.5 µA while placing the outputs in a high-impedance state. The device is packaged for surface mounting in a 14-pin small-outline package.
What are the key specifications of TS902IDT that engineers should know?
The TS902IDT combines two amplifiers, a 1.4 MHz gain-bandwidth product, rail-to-rail input and output operation, and a 0.5 µA standby current in a 14-pin small-outline package. The manufacturer datasheet also identifies a -40 °C to +125 °C operating range. A retrieved technical listing reports a maximum input offset voltage of 12 mV and input bias current of 0.00015 µA, making the amplifier suitable for moderate-bandwidth, low-power analog signal conditioning.
What is the operating voltage range of TS902IDT?
The TS902IDT is identified as a rail-to-rail, single- or dual-supply CMOS dual operational amplifier with a listed maximum supply voltage of 8 V. The manufacturer describes the input and output ranges as rail-to-rail, allowing operation close to the supply limits. Exact minimum and maximum operating voltages for each supply configuration should be confirmed against the electrical-characteristics table in the STMicroelectronics TS902 datasheet.
Where can I download the TS902IDT datasheet PDF?
The TS902IDT datasheet PDF is available from the manufacturer-linked documentation paths and the directly indexed STMicroelectronics PDF copy at https://www.abc-semi.com/datasheets/TS902IDT.pdf. The TS902 family documentation also appears at https://www.alldatasheet.com/datasheet-pdf/pdf/25495/STMICROELECTRONICS/TS902.html. Use the TS902 family document for electrical characteristics, pin connections, standby behavior, and application information.
Where can I find the TS902IDT pinout?
The TS902IDT pin connections are documented in the pin-connections section of the STMicroelectronics TS902 family datasheet and in the obsolete-product datasheet linked at https://www.mouser.com/catalog/specsheets/stmicroelectronics_cd00000500.pdf. The TS902IDT uses a 14-pin small-outline package with order code DT indicating tape-and-reel delivery. Assign PCB nets directly from that manufacturer pin-connections diagram rather than relying on a generic SOIC-14 diagram.
Is TS902IDT suitable for low-power sensor applications?
The TS902IDT is suitable for low-power sensor signal conditioning because its rail-to-rail input range supports signals near the supply limits and its standby current is only 0.5 µA. The reported input bias current of 0.00015 µA is also favorable for high-impedance sensors. The amplifier's 1.4 MHz gain-bandwidth product is adequate for slow sensor signals and general-purpose filtering rather than high-speed instrumentation.
What is the best drop-in replacement for TS902IDT?
No drop-in replacement can be confirmed from the retrieved cross-reference information for the exact TS902IDT configuration. A replacement must match the 14-pin SOIC footprint, rail-to-rail input and output behavior, supply range, output-current capability, and required standby function. Similar general-purpose amplifiers may omit the standby pins or use different electrical limits, so select a candidate only after comparing it against the manufacturer pin and electrical-characteristics tables.
Can LM2902DT replace TS902IDT?
LM2902DT should not be treated as an automatic TS902IDT drop-in replacement. Although a retrieved comparison page names LM2902DT alongside TS904IDT, it does not establish that LM2902DT has the TS902IDT rail-to-rail input and output ranges or standby function. The 14-pin package alone is insufficient; verify every pin, common-mode range, output swing, supply rating, offset, bias current, and shutdown behavior before substitution.
What is the best STMicroelectronics equivalent for TS902IDT?
The verified cross-reference results do not identify a distinct STMicroelectronics MPN that can be confirmed as a pin-to-pin TS902IDT replacement. The TS902ID and TS902IDT order codes represent different delivery configurations rather than useful engineering alternatives, while TS904IDT is a different amplifier family. The safest selection path is to compare a candidate's 14-pin SOIC pinout and complete electrical specifications against the original TS902 requirements.
Where to buy TS902IDT online?
Use the Request a Quote form on this page to request TS902IDT availability, current lead time, and minimum order quantity for the exact tape-and-reel part. The component is listed in stock by at least one indexed distributor page, but inventory can change without notice. Include the exact MPN TS902IDT when requesting a quotation so that the quote is not confused with another TS902 package or order code.
What is the price of TS902IDT?
The current commercial price for the exact TS902IDT is obtained through the Request a Quote form on this page. The indexed distributor pages show no explicit quantity-break prices for this exact MPN, so this page does not publish a potentially stale unit-price figure. Submit the MPN and required quantity through the quote form to obtain current pricing, stock confirmation, and order handling.
What is the lead time for TS902IDT?
The current lead time for TS902IDT should be confirmed through the Request a Quote form on this page. The part is identified by STMicroelectronics, is in SOIC-14 tape-and-reel packaging, and is associated with an obsolete-product datasheet, so procurement timing should be checked for the exact MPN rather than inferred from another TS902 variant. Request quantity, date code, and packaging requirements when obtaining the quotation.
Is TS902IDT in stock?
An indexed distributor page currently labels TS902IDT as in stock, but stock levels can change without notice and the manufacturer documentation identifies the TS902 as an obsolete product. Use the Request a Quote form on this page for a real-time confirmation of the exact TS902IDT tape-and-reel configuration. Include the required quantity and target delivery date to obtain an actionable availability response.
TS902IDT vs TS904IDT: which is better for rail-to-rail amplification?
TS902IDT is the appropriate choice when the design specifically requires the TS902's 1.4 MHz gain-bandwidth product, rail-to-rail input and output operation, and 0.5 µA standby function. TS904IDT belongs to a different STMicroelectronics amplifier family, and the retrieved comparison information does not establish interchangeable electrical performance. Compare both devices' common-mode range, output swing, offset voltage, bias current, and shutdown behavior against the circuit requirements.
When should I choose TS902IDT instead of a conventional dual op amp?
Choose TS902IDT when the signal can approach the supply rails, the output must swing close to the rail limits, or the 0.5 µA standby function is needed for duty-cycled operation. Its 1.4 MHz gain-bandwidth product also makes it practical for general-purpose sensor and control loops. Choose a conventional amplifier instead when its wider unity-gain bandwidth, lower offset, lower distortion, or broader supply rating is more important than rail-to-rail operation.
What does the TS902IDT standby function do?
The TS902IDT standby function reduces current consumption to 0.5 µA and switches the amplifier outputs into a high-impedance state. According to the STMicroelectronics TS902 family description, this mode is intended to lower consumption when signal amplification is not required. A design should not assume that a high-impedance output maintains an accurate analog level during standby; downstream circuitry must tolerate that state and use the control signal appropriately.

کے لیے انجینئرنگ ریفرنس ڈیٹا TS902IDT — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the TS902IDT when a design needs two general-purpose amplifier channels, rail-to-rail input and output behavior, a 1.4 MHz gain-bandwidth product, and a 0.5 µA standby mode in a 14-pin SOIC footprint. It is particularly suitable for single-supply sensor interfaces, portable measurement circuits, and low-power control systems whose signals approach the supply rails. LM2902DT may appear in comparison searches because it is also a dual amplifier in a similar package, but it should be selected only if its non-rail-to-rail input, output swing, offset, noise, and lack of confirmed standby function meet the application requirements. TS904IDT belongs to a different amplifier family and should be considered only after a complete electrical and pin-level comparison. Because TS902IDT is obsolete, engineers should use the Request a Quote form to confirm exact-MPN availability and avoid assuming that a differently packaged TS902 order code is interchangeable.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand STMicroelectronics
Package 14-pin small-outline package (SO14)
Amplifier Configuration Dual
Gain-Bandwidth Product 1.4 MHz
Input Common-Mode Range Rail-to-rail
Output Voltage Range Rail-to-rail
Maximum Input Offset Voltage 12 mV
Input Bias Current 0.00015 µA
Standby Current 0.5 µA
Operating Temperature Range -40 °C to +125 °C

اہم امتیازی خصوصیات

  • Combines rail-to-rail operation with a dedicated low-power state (بمقابلہLM2902DT)
  • Provides two independently usable amplifier channels in one package (بمقابلہLM2902DT)
  • Supports an extended industrial temperature range (بمقابلہTS904IDT)

ڈیزائن نوٹس

Do not treat SOIC-14 package equality as proof of replacement compatibility. A substitute must match the TS902IDT pin functions, including the standby-control behavior, and must satisfy the rail-to-rail input range, output swing, supply-voltage limits, and output-current requirements. Pay particular attention to the 12 mV maximum input offset and to changes in bias current, because these differences can materially alter DC measurement accuracy even when the pin count is unchanged.

The 0.5 µA standby current belongs to the amplifier’s standby state and does not guarantee that the complete circuit consumes only 0.5 µA. Resistor dividers, sensor bias networks, leakage paths, and control logic can dominate system consumption. During layout, keep the standby-control trace away from sensitive input nodes and ensure that disconnected sensors cannot inject charge into the amplifier outputs. Use the Request a Quote form to confirm the exact MPN and delivery configuration before placing a long-lead-time obsolete-product order.

Place the input and output components associated with each amplifier channel close to their respective pins, and keep the high-impedance input route short to reduce leakage and pickup. The two channels share the same package but are independent circuits, so maintain separate feedback and filtering layouts where channel isolation matters. Connect supply decoupling according to the STMicroelectronics TS902 application guidance and provide an exposed, uninterrupted ground path beneath the SOIC package where the board design supports it.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The retrieved documentation identifies an obsolete-product TS902 datasheet and an industrial temperature range, but it does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

ts902 tfnsw TS902IDT datasheet TS902IDT datasheet pdf TS902IDT pinout TS902IDT equivalent TS902IDT replacement TS902IDT cross reference TS902IDT SOIC-14 amplifier TS902IDT rail-to-rail op amp TS902IDT price and stock

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics TS902IDT TS902 dual operational amplifier CMOS operational amplifier analog integrated circuit semiconductor rail-to-rail input rail-to-rail output gain-bandwidth product 1.4 MHz input offset voltage 12 mV input bias current 0.5 µA standby current single-supply operation dual-supply operation SOIC-14 surface-mount package industrial electronics sensor signal conditioning portable instrumentation audio preamplification battery monitoring
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں