TS952IYD - Dual Rail-to-Rail Low-Power Op Amp | STMicroelectronics
MPN: TS952IYD ✓ فعالTS952IYD جائزہ
An operational amplifier is an analog signal-conditioning device that uses external feedback to amplify voltage differences between its differential inputs. A rail-to-rail input stage accepts signals extending close to the positive or negative supply rail, while a rail-to-rail output stage can swing its output toward those rails. This capability is useful when signal levels occupy much of the available supply-voltage range and conventional input or output stages would otherwise introduce avoidable clipping.
The TS952IYD is identified as a standard general-purpose, input/output rail-to-rail, low-power amplifier. Its two-circuit configuration supports independent signal paths within one package. The manufacturer describes the TS95x family as optimized and fully specified for 3 V and 5 V operation, giving designers a clear basis for portable and embedded applications that operate from low-voltage rails. The SOIC-8 package also supports conventional surface-mount assembly and inspection.
The family's low-power orientation is significant because analog performance depends on more than nominal gain. Supply current, input bias behavior, output swing, noise, and the usable common-mode range determine whether an amplifier can process small sensor signals without consuming excessive energy or clipping near the rails. Exact electrical limits should be selected against the manufacturer's operating tables for the intended supply voltage and temperature range.
Typical uses include battery-powered sensor conditioning, portable audio and communication interfaces, current measurement, low-voltage data acquisition, and embedded control systems. Two amplifiers can also implement independent gain stages, buffer functions, or active filtering when each channel requires its own feedback network. When both channels operate close to the supply rails, decoupling and grounding become especially important for preserving signal integrity.
For implementation, place the bypass capacitor adjacent to the supply pins and connect the two ground pins to a low-impedance ground plane. Avoid long feedback traces and route sensitive input and output nets away from switching nodes. Confirm that the required input range, output swing, gain-bandwidth behavior, and load current remain within the manufacturer's limits at the actual supply voltage.
This product page combines the TS952IYD device identity, package information, sourcing guidance, application context, and practical layout considerations. It also distinguishes directly documented characteristics from parameters that must be confirmed in the manufacturer datasheet, helping engineers plan a reliable low-voltage analog design without relying on generic operational-amplifier assumptions.
کے لیے ڈراپ اِن متبادل TS952IYD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TS952IYD (یکساں فارم فیکٹر اور فٹ پرنٹ).
TS952ID
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →TS952IYD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Amplifier Type | General-purpose operational amplifier |
| Number of Amplifier Channels | 2 channels |
| Input Rail-to-Rail | Yes |
| Output Rail-to-Rail | Yes |
| Optimized Supply Voltage | 3 V and 5 V |
| Power Class | Low-power operational amplifier |
| پیکیج | 8-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount |
| پنز کی تعداد | 8 pins |
TS952IYD 8-pin soic پن کنفیگریشن گائیڈ
TS952IYD (8-pin soic پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TS952IYD.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TS952IYD کے لیے موزوں ہے 6 ایپلیکیشنs: Battery-Powered Sensor Conditioning, Portable Audio Signal Conditioning, Low-Voltage Data Acquisition, Current-Shunt Measurement, Industrial Control Interface, Portable Communication Interface.
Battery-Powered Sensor Conditioning
The TS952IYD fits battery-powered sensor interfaces because its dual rail-to-rail architecture operates in low-voltage systems targeted at 3 V or 5 V. Two channels can condition complementary sensor outputs, buffer a reference, or form gain stages around a resistive bridge. Rail-to-rail input behavior preserves more of the available signal range, while rail-to-rail output capability improves utilization of the output swing. In an energy-limited design, confirm the channel supply current from the manufacturer datasheet and compare it with the sensor and conversion circuitry. Place bypass capacitance close to the supply pins and route the bridge or sensor return directly to the ground plane to minimize offsets caused by supply and ground impedance.
تجویز کردہ
Portable Audio Signal Conditioning
The TS952IYD can condition low-level audio signals in portable equipment because it combines two rail-to-rail amplifier channels with low-power operation optimized for 3 V and 5 V rails. One channel may provide preamplification while the second buffers or performs active filtering, reducing the need for separate packages in space-constrained products. Rail-to-rail input and output operation supports signals that would otherwise approach the limits of conventional amplifier stages. Verify the manufacturer gain-bandwidth, output-current, and load-capacitance limits for the intended network, because low-frequency audio specifications alone do not establish stability with every passive combination.
تجویز کردہ
Low-Voltage Data Acquisition
The TS952IYD is applicable to compact data-acquisition front ends that operate from 3 V or 5 V and need two closely related analog channels. The amplifiers can implement non-inverting or differential stages, level-shift sensor outputs, or drive an ADC input when their input range, output swing, bandwidth, and capacitive-drive capability meet the design requirements. Dual integration reduces package count and simplifies channel matching. For measurable accuracy, keep the input source impedance low enough for the amplifier's bias-current requirements and place the feedback network close to the device. Confirm the ADC input range and acquisition settling behavior against the manufacturer timing specifications.
تجویز کردہ
Current-Shunt Measurement
The TS952IYD can amplify the small differential voltage produced by a current-shunt monitor when the system operates from a low-voltage rail. Its rail-to-rail inputs help preserve measurement range, and the two channels can amplify the shunt signal while buffering a reference or supporting an additional sensor path. The application must remain within the amplifier's input common-mode range, output swing, gain-bandwidth product, and offset specifications at the actual supply voltage. A Kelvin connection from the shunt to the amplifier inputs reduces voltage drops caused by trace and connector resistance. Add input filtering that matches the required bandwidth without allowing excessive differential-input voltage during fault conditions.
تجویز کردہ
Industrial Control Interface
The TS952IYD suits compact industrial control interfaces that condition low-level sensor and control signals from 3 V or 5 V supplies. Two channels can support a command output and feedback input, an analog setpoint plus sensor return, or paired filter stages. The 8-pin SOIC format simplifies conventional surface-mount assembly, while rail-to-rail operation improves signal range in systems where not every rail is available. Industrial qualification requirements still need separate review: confirm operating-temperature limits, supply tolerance, and any AEC-Q100 status directly from the manufacturer documentation. Maintain a continuous ground return between the signal source and amplifier to prevent ground-potential differences from appearing as input error.
تجویز کردہ
Portable Communication Interface
The TS952IYD can provide analog conditioning around a low-voltage communication transceiver, sensor, or baseband node. One channel can amplify a received signal while the other provides buffering or active filtering for an adjacent stage, making the dual package efficient for portable equipment. The family's low-power focus and optimization for 3 V and 5 V operation align with compact battery-powered electronics. Check the amplifier's slew rate, gain-bandwidth product, settling behavior, and output-load capability against the signal bandwidth. Keep RF and switching traces away from the input and feedback nodes, and use a single quiet ground reference to minimize conversion of common-mode disturbances into differential measurement error.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TS952IYD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | TS952ID |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 8-pin SOIC | 8-pin SOIC |
| Amplifier Channels | 2 channels | 2 channels |
| Input Type | Input and output rail-to-rail | Input and output rail-to-rail |
| Power Class | Low-power | Low-power |
| Optimized Supply Voltage | 3 V and 5 V | 3 V and 5 V |
| Application Class | General-purpose amplification | General-purpose amplification |
| Mounting Type | Surface mount | Surface mount |
اہم امتیازی خصوصیات
- Combines two rail-to-rail amplifiers in one compact package (بمقابلہLM2902N/PB)
- Optimized for low-voltage 3 V and 5 V systems (بمقابلہTS952ID)
- Rail-to-rail operation improves signal utilization (بمقابلہLM324NSR)
ڈیزائن نوٹس
Place the supply bypass capacitor directly between the amplifier supply pin and the adjacent ground pin. Keep the input, feedback, and output traces short, and terminate unused amplifier inputs according to the manufacturer's recommended configuration. A continuous ground plane under the device provides a low-impedance return for both channels and reduces the risk that supply-current changes will modulate the input reference.
Check the actual common-mode and output-voltage limits at the intended 3 V or 5 V supply rather than assuming full rail-to-rail operation under every load. Include output-load and capacitive-load constraints when selecting feedback components. For sensor inputs, use a return path that remains adjacent to the signal trace and avoid routing inputs beside switching-regulator or digital-clock nets.
Do not substitute a different TS95x member solely because it has a similar amplifier count; package construction and electrical limits may differ. Confirm pin functions, supply range, common-mode range, output swing, bandwidth, and stability for every proposed replacement. Treat the SOIC-8 footprint match as only the first requirement for a true drop-in decision rather than proof of functional equivalence.
تعمیل کی معلومات
The available product information does not state the compliance status of TS952IYD. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the manufacturer product documentation before procurement.