TS952IYD - Dual Rail-to-Rail Low-Power Op Amp | STMicroelectronics
MPN: TS952IYD ✓ 啟用中TS952IYD 概覽
An operational amplifier is an analog signal-conditioning device that uses external feedback to amplify voltage differences between its differential inputs. A rail-to-rail input stage accepts signals extending close to the positive or negative supply rail, while a rail-to-rail output stage can swing its output toward those rails. This capability is useful when signal levels occupy much of the available supply-voltage range and conventional input or output stages would otherwise introduce avoidable clipping.
The TS952IYD is identified as a standard general-purpose, input/output rail-to-rail, low-power amplifier. Its two-circuit configuration supports independent signal paths within one package. The manufacturer describes the TS95x family as optimized and fully specified for 3 V and 5 V operation, giving designers a clear basis for portable and embedded applications that operate from low-voltage rails. The SOIC-8 package also supports conventional surface-mount assembly and inspection.
The family's low-power orientation is significant because analog performance depends on more than nominal gain. Supply current, input bias behavior, output swing, noise, and the usable common-mode range determine whether an amplifier can process small sensor signals without consuming excessive energy or clipping near the rails. Exact electrical limits should be selected against the manufacturer's operating tables for the intended supply voltage and temperature range.
Typical uses include battery-powered sensor conditioning, portable audio and communication interfaces, current measurement, low-voltage data acquisition, and embedded control systems. Two amplifiers can also implement independent gain stages, buffer functions, or active filtering when each channel requires its own feedback network. When both channels operate close to the supply rails, decoupling and grounding become especially important for preserving signal integrity.
For implementation, place the bypass capacitor adjacent to the supply pins and connect the two ground pins to a low-impedance ground plane. Avoid long feedback traces and route sensitive input and output nets away from switching nodes. Confirm that the required input range, output swing, gain-bandwidth behavior, and load current remain within the manufacturer's limits at the actual supply voltage.
This product page combines the TS952IYD device identity, package information, sourcing guidance, application context, and practical layout considerations. It also distinguishes directly documented characteristics from parameters that must be confirmed in the manufacturer datasheet, helping engineers plan a reliable low-voltage analog design without relying on generic operational-amplifier assumptions.
直接替換替代品,適用於 TS952IYD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
TS952IYD 最大額定值與電氣特性
| Amplifier Type | General-purpose operational amplifier |
| Number of Amplifier Channels | 2 channels |
| Input Rail-to-Rail | Yes |
| Output Rail-to-Rail | Yes |
| Optimized Supply Voltage | 3 V and 5 V |
| Power Class | Low-power operational amplifier |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
| 腳位數 | 8 pins |
TS952IYD 8-pin soic 腳位配置指南
TS952IYD(8-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TS952IYD.
請參閱 資料表 以查看完整腳位配置。
典型應用
TS952IYD 適用於 6 應用s: Battery-Powered Sensor Conditioning, Portable Audio Signal Conditioning, Low-Voltage Data Acquisition, Current-Shunt Measurement, Industrial Control Interface, Portable Communication Interface.
Battery-Powered Sensor Conditioning
The TS952IYD fits battery-powered sensor interfaces because its dual rail-to-rail architecture operates in low-voltage systems targeted at 3 V or 5 V. Two channels can condition complementary sensor outputs, buffer a reference, or form gain stages around a resistive bridge. Rail-to-rail input behavior preserves more of the available signal range, while rail-to-rail output capability improves utilization of the output swing. In an energy-limited design, confirm the channel supply current from the manufacturer datasheet and compare it with the sensor and conversion circuitry. Place bypass capacitance close to the supply pins and route the bridge or sensor return directly to the ground plane to minimize offsets caused by supply and ground impedance.
推薦
Portable Audio Signal Conditioning
The TS952IYD can condition low-level audio signals in portable equipment because it combines two rail-to-rail amplifier channels with low-power operation optimized for 3 V and 5 V rails. One channel may provide preamplification while the second buffers or performs active filtering, reducing the need for separate packages in space-constrained products. Rail-to-rail input and output operation supports signals that would otherwise approach the limits of conventional amplifier stages. Verify the manufacturer gain-bandwidth, output-current, and load-capacitance limits for the intended network, because low-frequency audio specifications alone do not establish stability with every passive combination.
推薦
Low-Voltage Data Acquisition
The TS952IYD is applicable to compact data-acquisition front ends that operate from 3 V or 5 V and need two closely related analog channels. The amplifiers can implement non-inverting or differential stages, level-shift sensor outputs, or drive an ADC input when their input range, output swing, bandwidth, and capacitive-drive capability meet the design requirements. Dual integration reduces package count and simplifies channel matching. For measurable accuracy, keep the input source impedance low enough for the amplifier's bias-current requirements and place the feedback network close to the device. Confirm the ADC input range and acquisition settling behavior against the manufacturer timing specifications.
推薦
Current-Shunt Measurement
The TS952IYD can amplify the small differential voltage produced by a current-shunt monitor when the system operates from a low-voltage rail. Its rail-to-rail inputs help preserve measurement range, and the two channels can amplify the shunt signal while buffering a reference or supporting an additional sensor path. The application must remain within the amplifier's input common-mode range, output swing, gain-bandwidth product, and offset specifications at the actual supply voltage. A Kelvin connection from the shunt to the amplifier inputs reduces voltage drops caused by trace and connector resistance. Add input filtering that matches the required bandwidth without allowing excessive differential-input voltage during fault conditions.
推薦
Industrial Control Interface
The TS952IYD suits compact industrial control interfaces that condition low-level sensor and control signals from 3 V or 5 V supplies. Two channels can support a command output and feedback input, an analog setpoint plus sensor return, or paired filter stages. The 8-pin SOIC format simplifies conventional surface-mount assembly, while rail-to-rail operation improves signal range in systems where not every rail is available. Industrial qualification requirements still need separate review: confirm operating-temperature limits, supply tolerance, and any AEC-Q100 status directly from the manufacturer documentation. Maintain a continuous ground return between the signal source and amplifier to prevent ground-potential differences from appearing as input error.
推薦
Portable Communication Interface
The TS952IYD can provide analog conditioning around a low-voltage communication transceiver, sensor, or baseband node. One channel can amplify a received signal while the other provides buffering or active filtering for an adjacent stage, making the dual package efficient for portable equipment. The family's low-power focus and optimization for 3 V and 5 V operation align with compact battery-powered electronics. Check the amplifier's slew rate, gain-bandwidth product, settling behavior, and output-load capability against the signal bandwidth. Keep RF and switching traces away from the input and feedback nodes, and use a single quiet ground reference to minimize conversion of common-mode disturbances into differential measurement error.
推薦
推薦產品摘要
工程參考資料,適用於 TS952IYD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TS952ID |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 8-pin SOIC | 8-pin SOIC |
| Amplifier Channels | 2 channels | 2 channels |
| Input Type | Input and output rail-to-rail | Input and output rail-to-rail |
| Power Class | Low-power | Low-power |
| Optimized Supply Voltage | 3 V and 5 V | 3 V and 5 V |
| Application Class | General-purpose amplification | General-purpose amplification |
| Mounting Type | Surface mount | Surface mount |
主要差異化特點
- Combines two rail-to-rail amplifiers in one compact package (對比LM2902N/PB)
- Optimized for low-voltage 3 V and 5 V systems (對比TS952ID)
- Rail-to-rail operation improves signal utilization (對比LM324NSR)
設計說明
Place the supply bypass capacitor directly between the amplifier supply pin and the adjacent ground pin. Keep the input, feedback, and output traces short, and terminate unused amplifier inputs according to the manufacturer's recommended configuration. A continuous ground plane under the device provides a low-impedance return for both channels and reduces the risk that supply-current changes will modulate the input reference.
Check the actual common-mode and output-voltage limits at the intended 3 V or 5 V supply rather than assuming full rail-to-rail operation under every load. Include output-load and capacitive-load constraints when selecting feedback components. For sensor inputs, use a return path that remains adjacent to the signal trace and avoid routing inputs beside switching-regulator or digital-clock nets.
Do not substitute a different TS95x member solely because it has a similar amplifier count; package construction and electrical limits may differ. Confirm pin functions, supply range, common-mode range, output swing, bandwidth, and stability for every proposed replacement. Treat the SOIC-8 footprint match as only the first requirement for a true drop-in decision rather than proof of functional equivalence.
合規資訊
The available product information does not state the compliance status of TS952IYD. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the manufacturer product documentation before procurement.