Microchip Technology

USB2534-1080AEN - 4-Port USB 2.0 Hub Controller | Microchip

MPN: USB2534-1080AEN ✓ فعال
3 V to 3.6 V Vdss 36-pin SQFN, 6 mm x 6 mm Package 24 MHz Speed
MOQ: 1 |

USB2534-1080AEN جائزہ

Microchip Technology USB2534-1080AEN is a low-power, OEM-configurable USB 2.0 hub controller with four downstream ports, a 24 MHz operating frequency, and a 36-pin SQFN surface-mount package measuring 6 mm by 6 mm. Its Multi-Transaction Translator architecture supports Full-Speed or Hi-Speed upstream connections for embedded USB hub designs.

A USB hub controller is an interface integrated circuit that coordinates traffic between one upstream USB port and multiple downstream ports. Within the product hierarchy, it is a USB interface controller, then a USB interface IC, then an integrated circuit. The USB2534 supports OEM configuration, allowing a manufacturer to tailor hub behavior for embedded equipment while retaining a compact controller-only implementation.

The controller provides four downstream ports and complies with the USB 2.0 Specification and USB 2.0 Link Power Management Addendum. It can operate as a Full-Speed hub or as a Full-/Hi-Speed hub depending on the attached upstream link. USB-IF Battery Charger revision 1.2 support is also identified for the USB2534 family. Its stated operating frequency is 24 MHz.

The Multi-Transaction Translator architecture allows multiple USB transaction functions to be managed by the controller rather than requiring a separate host interface for every downstream function. This architecture is useful in embedded systems that need more peripheral connectivity without adding a discrete full-size host controller. The controller works as the central protocol and routing element between the upstream host and attached devices.

Typical uses include USB connection expansion in industrial equipment, compact embedded host systems, docking products, and multifunction peripherals. The four-port arrangement suits systems combining keyboards, storage, communications modules, and service interfaces. A design can also use one downstream connection for an internal device while exposing the remaining ports to a user-accessible panel.

PCB implementation requires careful high-speed signal routing, continuous reference planes, short matched-length interconnects, and clean separation between analog supply paths and USB data traces. Keep the 24 MHz clock circuit compact, route differential pairs without unnecessary vias, and follow the pin-description and layout guidance in the manufacturer datasheet. The exposed package ground and power connections must be connected according to the land pattern for reliable operation.

This page combines the manufacturer USB2534 product information, family-level USB 2.0 capabilities, package data, practical design guidance, and structured comparisons. It is intended to help engineers determine whether the four-port controller, 36-SQFN footprint, and MTT architecture fit an embedded USB hub before completing the board-level design.

کے لیے ڈراپ اِن متبادل USB2534-1080AEN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں USB2534-1080AEN (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, RoHS Status.

Microchip Technology
Package: 36-pin QFN (6x6 mm) with exposed pad
RoHS Status: Compliant
موازنہ کریں USB2534-1080AEN →
Microchip Technology
Package: 36-SQFN (6 x 6 mm)
موازنہ کریں USB2534-1080AEN →

USB2534I-1080AEN

✅ ڈراپ-اِن
Microchip Technology
📦 36-SQFN (6x6)
USB 2.0 hub controller · 4 ports · USB 2.0 · Supported · Supported · MTT (Multi-Transaction Translator) · Supported · USB 2.0 Link Power Management Addendum support

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

USB2534-1081AEN-TR

✅ ڈراپ-اِن
📦 36-SQFN (6x6)
Configuration suffix differs; the four-port USB 2.0 hub function and 36-terminal package are retained

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

USB2534-1050AEN-TR

✅ ڈراپ-اِن
📦 36-SQFN (6x6)
Family configuration suffix differs; all candidates retain the four-port USB 2.0 controller architecture and 36-terminal package

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

USB2514B-AEZC

✅ ڈراپ-اِن
Microchip Technology
📦 36-SQFN (6x6)
USB 2.0 Hi-Speed 4-Port Hub Controller · USB 2.0 (Low/Full/Hi-Speed) · 4 · 480 Mbps (Hi-Speed) · 3.0 V to 3.6 V · Yes (per downstream port, via external switch) · I2C / SMBus · PRTPWR outputs per port

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

USB2534-1080AEN تفصیلات

Device Type USB 2.0 hub controller
Downstream Port Count 4 ports
Upstream Operating Modes Full-Speed or Full-/Hi-Speed hub
USB Compliance USB 2.0 Specification and USB 2.0 Link Power Management Addendum
Architecture MTT (Multi-Transaction Translator)
Operating Frequency 24 MHz
Operating Voltage Range 3 V to 3.6 V
Configuration Method OEM configurable
Battery Charger Support USB-IF Battery Charger revision 1.2
پیکیج 36-pin SQFN, 6 mm x 6 mm
ماؤنٹنگ ٹائپ Surface mount
Maximum Data Rate 480 Mb/s for USB 2.0 Hi-Speed operation
RoHS اسٹیٹس unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Terminal Count 36 terminals
Supplier Part Suffix AEN

USB2534-1080AEN 36-pin sqfn, 6 mm x 6 mm پن کنفیگریشن گائیڈ

USB2534-1080AEN (36-pin sqfn, 6 mm x 6 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

USB2534-1080AEN کے لیے 36-pin sqfn, 6 mm x 6 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں USB2534-1080AEN.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

USB2534-1080AEN کے لیے موزوں ہے 6 ایپلیکیشنs: Embedded USB Port Expansion, Industrial Data Acquisition Gateway, Compact Docking Station, Medical Instrument Peripheral Hub, Portable Diagnostic Console, Network Administration Appliance.

🔧

Embedded USB Port Expansion

The USB2534-1080AEN fits embedded systems that need four downstream USB connections behind one upstream port. Its four-port USB 2.0 hub function allows storage, communications, human-interface, and service peripherals to share a single host connection without adding a separate host controller for every function. The 36-SQFN package also keeps the controller compact for tightly integrated equipment. During schematic design, confirm upstream and downstream routing, current-limit behavior, and the required configuration from the manufacturer datasheet before assigning all peripheral connections.

🏭

Industrial Data Acquisition Gateway

The USB2534-1080AEN can serve as the USB expansion controller in an industrial gateway that connects several field-service peripherals to a host computer. Four downstream ports support a mix of configuration interfaces, isolated serial adapters, storage, and diagnostic equipment while the USB 2.0 specification provides a defined protocol baseline. The low-power, OEM-configurable controller approach suits customized embedded products. Field deployment also depends on the exact device temperature grade, surge protection, enclosure, and power distribution outside the controller itself.

🔧

Compact Docking Station

The USB2534-1080AEN is appropriate for a compact docking station requiring four USB 2.0 downstream ports from one upstream connection. Its 24 MHz controller operation and four-port MTT architecture provide a practical foundation for storage, keyboard, mouse, and peripheral connections. The 6 mm x 6 mm SQFN package preserves board area, although careful routing is needed to maintain USB signal integrity. Designers should provide suitable port protection, correct supply decoupling, and compliant connector power management based on the finished dock architecture.

💊

Medical Instrument Peripheral Hub

The USB2534-1080AEN can organize multiple low-bandwidth USB peripherals in a medical instrument when the complete system uses a host platform with compatible USB support. Four downstream ports can serve a control interface, service connection, storage medium, and operator peripheral, reducing the number of direct host connections. USB 2.0 Link Power Management support is relevant to portable systems that need controlled link states. Medical suitability still depends on the complete system validation, electrical isolation, software controls, and regulatory requirements beyond the controller itself.

📱

Portable Diagnostic Console

The USB2534-1080AEN fits a portable diagnostic console that must expose several USB connections to a laptop, tablet, or embedded host. A single upstream link can fan out to service storage, measurement accessories, communications hardware, and a wired user interface. Its compact surface-mount package and OEM configurability support product differentiation without changing the host platform. Because the controller is only one element of the system, battery budgeting, port current limits, connector protection, and USB enumeration behavior must be validated in the finished portable design.

🌐

Network Administration Appliance

The USB2534-1080AEN can support peripheral connections in a network administration appliance with console, storage, modem, and service interfaces. The four downstream USB 2.0 ports consolidate those functions behind a single upstream connection, simplifying enclosure and host-interface design. The controller's OEM-configurable nature allows behavior to be aligned with the appliance's firmware and port requirements. Production designs should implement the manufacturer's reference layout, validate enumeration under worst-case device combinations, and ensure downstream power budgets do not exceed the protected port and connector limits.

What is the USB2534-1080AEN?
The USB2534-1080AEN is a Microchip Technology low-power, OEM-configurable USB 2.0 hub controller with four downstream ports. It uses Multi-Transaction Translator architecture, operates at 24 MHz, and is packaged in a 36-pin, 6 mm x 6 mm SQFN. According to the Microchip USB2534 manufacturer datasheet, it complies with the USB 2.0 Specification and USB 2.0 Link Power Management Addendum.
How many USB ports does USB2534-1080AEN support?
The USB2534-1080AEN supports four downstream USB ports in addition to its upstream connection. The four-port count is a core family specification in the Microchip USB2534 manufacturer datasheet. This arrangement lets one embedded system expose storage, communications, human-interface, or service peripherals through a single upstream USB link.
Where can I download the USB2534-1080AEN datasheet PDF?
The official USB2534-1080AEN datasheet PDF is available from Microchip Technology at the product datasheet link on this page. It describes the USB 2.0 hub architecture, port behavior, electrical characteristics, pin descriptions, and recommended layout. For a complete 36-terminal pin assignment, use the pin-description table in that manufacturer document rather than relying on a shortened distributor summary.
Where can I find the USB2534-1080AEN pinout?
The USB2534-1080AEN pinout is documented in the manufacturer USB2534 datasheet, which identifies the 36-terminal SQFN connection and its exposed thermal pad. Use the pin-description table when assigning USB data, power, clock, ground, and configuration connections. The exact pad geometry and numbering should be checked against the package drawing before beginning PCB layout.
What USB speeds does USB2534-1080AEN support?
The USB2534-1080AEN can attach through an upstream port as a Full-Speed hub or as a Full-/Hi-Speed hub. According to the Microchip USB2534 manufacturer datasheet, USB 2.0 Hi-Speed operation corresponds to a maximum signaling rate of 480 Mb/s, while the controller also supports the Full-Speed USB mode described by the USB 2.0 specification.
What are the key specifications of USB2534-1080AEN that engineers should know?
The key USB2534-1080AEN specifications are four downstream ports, USB 2.0 operation, 24 MHz clocking, a 3 V to 3.6 V operating range, and a 36-pin 6 mm x 6 mm SQFN package. The Microchip USB2534 manufacturer datasheet also identifies MTT architecture, OEM configurability, USB 2.0 Link Power Management Addendum compliance, and USB-IF Battery Charger revision 1.2 support.
What can replace USB2534-1080AEN?
USB2534I-1080AEN is the closest same-family candidate because it retains the USB2534 four-port controller function and 36-SQFN package identity. Whether it is electrically drop-in depends on the operating-temperature and device-status requirements of the target design. Confirm those ratings, configuration, and pin-level details in the manufacturer documentation before assigning it as a replacement.
Is USB2534I-1080AEN the same as USB2534-1080AEN?
USB2534I-1080AEN is a grade variant of the same USB2534 four-port hub-controller family, while USB2534-1080AEN is the specified commercial ordering code. Both are associated with the 36-SQFN package and identical nominal port count. The suffix distinction affects the exact ordering configuration and device ratings, which should be reviewed before substitution.
USB2534-1080AEN vs USB2514B-AEZC — which is better for an embedded USB hub?
The USB2534-1080AEN is the better starting point when the design specifically requires a four-downstream-port USB 2.0 MTT hub controller, because that port count and architecture are explicit USB2534 family specifications. USB2514B-AEZC is a different Microchip family with a different four-port controller designation, so it is not automatically pin-compatible. Verify footprint, pinout, configuration, and power behavior before considering it.
When should I choose USB2534-1080AEN over USB2534I-1080AEN?
Choose USB2534-1080AEN when its specified commercial grade, operating limits, and configuration match the product environment. Choose USB2534I-1080AEN when the design requires the I-grade ordering option and its manufacturer-defined operating limits are appropriate. Both belong to the four-port USB2534 family, so the decision should follow environmental requirements rather than an assumed functional improvement.
Is USB2534-1080AEN suitable for industrial USB expansion?
The USB2534-1080AEN is architecturally suitable for embedded USB expansion because it provides four downstream ports, MTT operation, USB 2.0 support, and compact surface-mount packaging. Industrial suitability must also be confirmed against the device operating-temperature rating and the enclosure, power-source, and environmental requirements of the complete product. Select a grade variant when its specified ratings better match those conditions.
Where can I buy USB2534-1080AEN online?
Use the Request a Quote form on this XAIPART page to request USB2534-1080AEN availability, order quantity, and current lead time. The form allows procurement teams to identify the exact 36-SQFN ordering code without substituting the -TR tape-and-reel version or another USB2534 configuration. Request the required delivery quantity and production schedule with the inquiry.
What is the price of USB2534-1080AEN?
Current commercial pricing for USB2534-1080AEN is obtained through the Request a Quote form on this XAIPART page. Submit the required quantity, target delivery date, and packaging preference so procurement can respond with an offer for the exact USB2534-1080AEN ordering code. The quoted commercial terms should also identify any minimum-order and lead-time conditions.
What is the lead time for USB2534-1080AEN?
The current lead time for USB2534-1080AEN should be requested through the Request a Quote form on this page. Include your required quantity, production schedule, and shipment destination when submitting the request. This establishes a product-specific commitment instead of relying on a generic stock estimate that may not apply to the selected package code.
Is USB2534-1080AEN in stock?
USB2534-1080AEN availability should be confirmed for the requested quantity through the Request a Quote form on this page. Submit the exact MPN, order quantity, and required ship date so the response reflects current component availability rather than a general USB hub-controller inventory statement. Include any approved alternate suffix only as a separate engineering option.

کے لیے انجینئرنگ ریفرنس ڈیٹا USB2534-1080AEN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose USB2534-1080AEN when the design requires a four-downstream-port USB 2.0 hub controller in a 36-SQFN package and the specified ordering configuration matches the product environment. It is a strong starting point for embedded industrial equipment, portable consoles, docks, and appliances because the family supports OEM configuration, MTT operation, Full-Speed or Hi-Speed upstream attachment, and USB 2.0 link power management.

Select USB2534I-1080AEN when its I-grade operating limits and lifecycle requirements better match the intended environment while preserving the same family and package identity. Consider USB2534-1081AEN-TR or USB2534-1050AEN-TR only after checking the family configuration table because the suffix can alter implementation details even though the port count and package identity remain. USB2514B-AEZC belongs to a different controller family and should be selected only after its pinout, configuration, power behavior, and signal timing have been compared line by line. For every candidate, validate the land pattern, USB enumeration, current limits, clock circuit, and high-speed layout against the final schematic and PCB.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ USB2534I-1080AEN USB2534-1081AEN-TR USB2534-1050AEN-TR USB2514B-AEZC
Package 36-SQFN (6x6) 36-SQFN (6x6) 36-SQFN (6x6) 36-SQFN (6x6) 36-SQFN (6x6)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Downstream Ports 4 ports 4 ports 4 ports 4 ports 4 ports
USB Generation USB 2.0 USB 2.0 USB 2.0 USB 2.0 USB 2.0

اہم امتیازی خصوصیات

  • Four-port USB 2.0 expansion in one controller (بمقابلہUSB2534-1081AEN-TR)
  • Multi-Transaction Translator architecture (بمقابلہUSB2514B-AEZC)
  • OEM-configurable embedded hub implementation (بمقابلہUSB2534I-1080AEN)
  • Documented USB 2.0 power-management and charger support (بمقابلہUSB2534-1050AEN-TR)

ڈیزائن نوٹس

Follow the USB2534 manufacturer reference layout for USB data, clock, supply, and ground connections. Route the 24 MHz clock with the shortest practical path, maintain continuous reference planes beneath high-speed traces, and minimize vias on USB differential pairs. Keep the controller and its decoupling network close to the associated connector and protection circuitry. Differential pair geometry should remain consistent through transitions so that signal integrity and enumeration behavior remain predictable.

Place the required input and output decoupling capacitors close to their designated device pins and terminate each network with the shortest practical ground return. The controller operates from 3 V to 3.6 V, so the supply design must remain within that range under load and transient conditions. USB downstream port current is determined by the overall hub design, including external power-distribution switches, protection devices, connectors, and the host's available current.

Do not treat the -TR ordering suffix as an identical commercial part number because it identifies a different packaging arrangement. Also do not assume that two USB2534 configuration codes are interchangeable without checking their manufacturer configuration tables and electrical requirements. The I-grade suffix may affect the applicable operating limits, while different configuration suffixes can change how hub functions are assigned. Perform a document-level review before releasing a substitute into production.

Validate the completed PCB for USB 2.0 Full-Speed and Hi-Speed operation across every required upstream/downstream connection. Pay particular attention to connector escapes, protection-device placement, return paths, and any cable transitions. The controller's 24 MHz clock circuitry should be isolated from noisy power-conversion paths where practical. If a board combines switching supplies with USB ports, use separate return-current planning and filtering so switching noise does not degrade the hub interface.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this ordering code. USB 2.0 Specification and USB 2.0 Link Power Management Addendum compliance are functional interface requirements rather than material-compliance claims.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

usb2534 datasheet microchip usb2534 USB2534-1080AEN datasheet USB2534-1080AEN datasheet pdf USB2534-1080AEN pinout USB2534-1080AEN footprint USB2534-1080AEN equivalent USB2534-1080AEN replacement USB2534-1080AEN vs USB2534I-1080AEN USB2534-1080AEN USB 2.0 hub USB2534-1080AEN 36-SQFN USB2534-1080AEN price USB2534-1080AEN stock USB2534-1080AEN lead time

متعلقہ اجزاء اور اصطلاحات

Microchip Technology USB2534-1080AEN USB2534 USB2534I-1080AEN USB2534-1081AEN-TR USB2534-1050AEN-TR USB2514B-AEZC USB 2.0 USB hub controller USB interface controller USB interface IC MTT Multi-Transaction Translator OEM-configurable controller USB 2.0 Link Power Management Addendum USB-IF Battery Charger revision 1.2 Full-Speed USB Hi-Speed USB 480 Mb/s 24 MHz 3 V to 3.6 V 36-SQFN QFN family surface mount embedded USB hub
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں