USB2534-1080AEN - 4-Port USB 2.0 Hub Controller | Microchip
MPN: USB2534-1080AEN ✓ AktifUSB2534-1080AEN Ringkasan
A USB hub controller is an interface integrated circuit that coordinates traffic between one upstream USB port and multiple downstream ports. Within the product hierarchy, it is a USB interface controller, then a USB interface IC, then an integrated circuit. The USB2534 supports OEM configuration, allowing a manufacturer to tailor hub behavior for embedded equipment while retaining a compact controller-only implementation.
The controller provides four downstream ports and complies with the USB 2.0 Specification and USB 2.0 Link Power Management Addendum. It can operate as a Full-Speed hub or as a Full-/Hi-Speed hub depending on the attached upstream link. USB-IF Battery Charger revision 1.2 support is also identified for the USB2534 family. Its stated operating frequency is 24 MHz.
The Multi-Transaction Translator architecture allows multiple USB transaction functions to be managed by the controller rather than requiring a separate host interface for every downstream function. This architecture is useful in embedded systems that need more peripheral connectivity without adding a discrete full-size host controller. The controller works as the central protocol and routing element between the upstream host and attached devices.
Typical uses include USB connection expansion in industrial equipment, compact embedded host systems, docking products, and multifunction peripherals. The four-port arrangement suits systems combining keyboards, storage, communications modules, and service interfaces. A design can also use one downstream connection for an internal device while exposing the remaining ports to a user-accessible panel.
PCB implementation requires careful high-speed signal routing, continuous reference planes, short matched-length interconnects, and clean separation between analog supply paths and USB data traces. Keep the 24 MHz clock circuit compact, route differential pairs without unnecessary vias, and follow the pin-description and layout guidance in the manufacturer datasheet. The exposed package ground and power connections must be connected according to the land pattern for reliable operation.
This page combines the manufacturer USB2534 product information, family-level USB 2.0 capabilities, package data, practical design guidance, and structured comparisons. It is intended to help engineers determine whether the four-port controller, 36-SQFN footprint, and MTT architecture fit an embedded USB hub before completing the board-level design.
Pilihan pengganti yang segera untuk USB2534-1080AEN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera USB2534-1080AEN (sama faktor bentuk dan kaki) — berbeza dalam Package, RoHS Status.
USB2534I-1080AEN
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →USB2534-1081AEN-TR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
USB2534-1050AEN-TR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
USB2514B-AEZC
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →USB2534-1080AEN Spesifikasi
| Device Type | USB 2.0 hub controller |
| Downstream Port Count | 4 ports |
| Upstream Operating Modes | Full-Speed or Full-/Hi-Speed hub |
| USB Compliance | USB 2.0 Specification and USB 2.0 Link Power Management Addendum |
| Architecture | MTT (Multi-Transaction Translator) |
| Operating Frequency | 24 MHz |
| Operating Voltage Range | 3 V to 3.6 V |
| Configuration Method | OEM configurable |
| Battery Charger Support | USB-IF Battery Charger revision 1.2 |
| Kemasan | 36-pin SQFN, 6 mm x 6 mm |
| Jenis Pemasangan | Surface mount |
| Maximum Data Rate | 480 Mb/s for USB 2.0 Hi-Speed operation |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Terminal Count | 36 terminals |
| Supplier Part Suffix | AEN |
Panduan Konfigurasi Pin USB2534-1080AEN 36-pin sqfn, 6 mm x 6 mm
Konfigurasi pin untuk USB2534-1080AEN (36-pin sqfn, 6 mm x 6 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk USB2534-1080AEN.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
USB2534-1080AEN patut untuk 6 aplikasis: Embedded USB Port Expansion, Industrial Data Acquisition Gateway, Compact Docking Station, Medical Instrument Peripheral Hub, Portable Diagnostic Console, Network Administration Appliance.
Embedded USB Port Expansion
The USB2534-1080AEN fits embedded systems that need four downstream USB connections behind one upstream port. Its four-port USB 2.0 hub function allows storage, communications, human-interface, and service peripherals to share a single host connection without adding a separate host controller for every function. The 36-SQFN package also keeps the controller compact for tightly integrated equipment. During schematic design, confirm upstream and downstream routing, current-limit behavior, and the required configuration from the manufacturer datasheet before assigning all peripheral connections.
Disebarkan
Industrial Data Acquisition Gateway
The USB2534-1080AEN can serve as the USB expansion controller in an industrial gateway that connects several field-service peripherals to a host computer. Four downstream ports support a mix of configuration interfaces, isolated serial adapters, storage, and diagnostic equipment while the USB 2.0 specification provides a defined protocol baseline. The low-power, OEM-configurable controller approach suits customized embedded products. Field deployment also depends on the exact device temperature grade, surge protection, enclosure, and power distribution outside the controller itself.
Disebarkan
Compact Docking Station
The USB2534-1080AEN is appropriate for a compact docking station requiring four USB 2.0 downstream ports from one upstream connection. Its 24 MHz controller operation and four-port MTT architecture provide a practical foundation for storage, keyboard, mouse, and peripheral connections. The 6 mm x 6 mm SQFN package preserves board area, although careful routing is needed to maintain USB signal integrity. Designers should provide suitable port protection, correct supply decoupling, and compliant connector power management based on the finished dock architecture.
Disebarkan
Medical Instrument Peripheral Hub
The USB2534-1080AEN can organize multiple low-bandwidth USB peripherals in a medical instrument when the complete system uses a host platform with compatible USB support. Four downstream ports can serve a control interface, service connection, storage medium, and operator peripheral, reducing the number of direct host connections. USB 2.0 Link Power Management support is relevant to portable systems that need controlled link states. Medical suitability still depends on the complete system validation, electrical isolation, software controls, and regulatory requirements beyond the controller itself.
Disebarkan
Portable Diagnostic Console
The USB2534-1080AEN fits a portable diagnostic console that must expose several USB connections to a laptop, tablet, or embedded host. A single upstream link can fan out to service storage, measurement accessories, communications hardware, and a wired user interface. Its compact surface-mount package and OEM configurability support product differentiation without changing the host platform. Because the controller is only one element of the system, battery budgeting, port current limits, connector protection, and USB enumeration behavior must be validated in the finished portable design.
Disebarkan
Network Administration Appliance
The USB2534-1080AEN can support peripheral connections in a network administration appliance with console, storage, modem, and service interfaces. The four downstream USB 2.0 ports consolidate those functions behind a single upstream connection, simplifying enclosure and host-interface design. The controller's OEM-configurable nature allows behavior to be aligned with the appliance's firmware and port requirements. Production designs should implement the manufacturer's reference layout, validate enumeration under worst-case device combinations, and ensure downstream power budgets do not exceed the protected port and connector limits.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk USB2534-1080AEN — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Select USB2534I-1080AEN when its I-grade operating limits and lifecycle requirements better match the intended environment while preserving the same family and package identity. Consider USB2534-1081AEN-TR or USB2534-1050AEN-TR only after checking the family configuration table because the suffix can alter implementation details even though the port count and package identity remain. USB2514B-AEZC belongs to a different controller family and should be selected only after its pinout, configuration, power behavior, and signal timing have been compared line by line. For every candidate, validate the land pattern, USB enumeration, current limits, clock circuit, and high-speed layout against the final schematic and PCB.
Perbandingan dengan Gantian
| Parametr | Produk Ini | USB2534I-1080AEN | USB2534-1081AEN-TR | USB2534-1050AEN-TR | USB2514B-AEZC |
|---|---|---|---|---|---|
| Package | 36-SQFN (6x6) | 36-SQFN (6x6) | 36-SQFN (6x6) | 36-SQFN (6x6) | 36-SQFN (6x6) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Downstream Ports | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| USB Generation | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
Penyeberangsung Jelas
- Four-port USB 2.0 expansion in one controller (vsUSB2534-1081AEN-TR)
- Multi-Transaction Translator architecture (vsUSB2514B-AEZC)
- OEM-configurable embedded hub implementation (vsUSB2534I-1080AEN)
- Documented USB 2.0 power-management and charger support (vsUSB2534-1050AEN-TR)
Catatan Desain
Follow the USB2534 manufacturer reference layout for USB data, clock, supply, and ground connections. Route the 24 MHz clock with the shortest practical path, maintain continuous reference planes beneath high-speed traces, and minimize vias on USB differential pairs. Keep the controller and its decoupling network close to the associated connector and protection circuitry. Differential pair geometry should remain consistent through transitions so that signal integrity and enumeration behavior remain predictable.
Place the required input and output decoupling capacitors close to their designated device pins and terminate each network with the shortest practical ground return. The controller operates from 3 V to 3.6 V, so the supply design must remain within that range under load and transient conditions. USB downstream port current is determined by the overall hub design, including external power-distribution switches, protection devices, connectors, and the host's available current.
Do not treat the -TR ordering suffix as an identical commercial part number because it identifies a different packaging arrangement. Also do not assume that two USB2534 configuration codes are interchangeable without checking their manufacturer configuration tables and electrical requirements. The I-grade suffix may affect the applicable operating limits, while different configuration suffixes can change how hub functions are assigned. Perform a document-level review before releasing a substitute into production.
Validate the completed PCB for USB 2.0 Full-Speed and Hi-Speed operation across every required upstream/downstream connection. Pay particular attention to connector escapes, protection-device placement, return paths, and any cable transitions. The controller's 24 MHz clock circuitry should be isolated from noisy power-conversion paths where practical. If a board combines switching supplies with USB ports, use separate return-current planning and filtering so switching noise does not degrade the hub interface.
Maklumat Kesediaan
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this ordering code. USB 2.0 Specification and USB 2.0 Link Power Management Addendum compliance are functional interface requirements rather than material-compliance claims.