آخری بار خریداری کا نوٹس: VSC8530XMW-03 اپنی زندگی کے اختتام کے قریب ہے۔ آخری آرڈر کی تاریخ: ہم سے رابطہ کریں. دستیاب متبادل پرزے دیکھیں →
Microchip Technology

VSC8530XMW-03 Single-Port Copper Ethernet PHY | Microchip

MPN: VSC8530XMW-03 ✗ اختتامِ زندگی
48-QFN Package
MOQ: 1 |

VSC8530XMW-03 جائزہ

The Microchip Technology VSC8530XMW-03 is a single-port industrial-grade copper Ethernet PHY with RGMII and RMII interfaces, IEEE 802.3az Energy Efficient Ethernet support, and Wake-on-LAN capability. It is packaged in a 48-QFN, 6 mm x 6 mm single-row surface-mount package for space-constrained Ethernet equipment.

An Ethernet physical-layer transceiver, commonly called a copper PHY, converts logical data transmitted by a host controller into signals that can travel over twisted-pair Ethernet cabling. Within the network hierarchy, the VSC8530XMW-03 connects an Ethernet media system to an RGMII- or RMII-based digital controller. Its single-port design suits one copper Ethernet link while its 6 mm x 6 mm package supports compact industrial, communications, and embedded-network designs.

The principal features of this device include support for RGMII and RMII host interfaces, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, and a broad selection of LVCMOS I/O levels. The combination of a compact 48-QFN package and low-power, small-form-factor design is particularly useful where board area, energy use, and standardized copper connectivity are important design constraints.

The VSC8530 belongs to the VSC85xx family of industrial-grade single-port Fast Ethernet copper PHYs. The -03 device is associated with the 6 mm x 6 mm package variant of that family. Host-interface selection is a central design decision because RGMII and RMII provide different data widths and signaling arrangements. PCB layout must also preserve the high-speed digital signal integrity required between the PHY and host controller.

Typical uses include industrial Ethernet controllers, communications equipment, embedded routers, single-port network appliances, and copper network interfaces operating in compact enclosures. The device can be used where one Ethernet port is sufficient and energy-efficient link operation helps reduce power consumption during inactive periods. Its Wake-on-LAN function supports remote activation and network-maintenance workflows.

For implementation, follow the manufacturer pin-description table and recommended layout guidance when assigning all 48 package connections and decoupling capacitors. The exposed pad and thermal path require careful PCB design, while RGMII or RMII routing requires short, controlled-impedance connections. Confirm the exact interface mode, clocking arrangement, and termination requirements before releasing the PCB.

This product page combines package identification, interface-focused engineering guidance, lifecycle information, and structured comparisons with the closest documented same-family alternatives. It is intended to help hardware engineers verify footprint compatibility, select the correct -03 revision, and plan an industrial copper Ethernet implementation with fewer board-level integration errors.

کے لیے ڈراپ اِن متبادل VSC8530XMW-03 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں VSC8530XMW-03 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Energy Efficient Ethernet, Host Interface.

Microchip Technology
Energy Efficient Ethernet: IEEE 802.3az
Host Interface: RGMII and RMII
موازنہ کریں VSC8530XMW-03 →

VSC8530XMW-04

✅ ڈراپ-اِن
Microchip Technology
📦 48-QFN (6x6 mm)
1 port · 10 Mbps and 100 Mbps · 10/100BASE-T copper Ethernet · RGMII and RMII · IEEE 802.3az · Supported · iTMP Synchronous Ethernet · LVCMOS

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

VSC8530XMW-05

✅ ڈراپ-اِن
📦 48-QFN (6x6 mm)
Same documented 48-QFN 6 mm x 6 mm package as VSC8530XMW-03; the -05 suffix denotes a different VSC8530 revision with configuration-specific differences.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

VSC8530XMW-03 تفصیلات

Product Type Single-port copper Ethernet PHY
Ethernet Port Count 1 port
Copper PHY Classification Fast Ethernet copper PHY
Host Interface RGMII or RMII
Energy Efficient Ethernet IEEE 802.3az supported
Wake-on-LAN Supported
I/O Logic Standard LVCMOS
Package Type 48-QFN
Package Dimensions 6 mm x 6 mm
Package Construction Single-row QFN
ماؤنٹنگ ٹائپ Surface mount
Industrial Grade Yes
آپریٹنگ درجہ حرارت رینج -40°C to +125°C
RoHS اسٹیٹس RoHS3 compliant
پن کی تعداد 48 pins

VSC8530XMW-03 single-row qfn پن کنفیگریشن گائیڈ

VSC8530XMW-03 (single-row qfn پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

VSC8530XMW-03 کے لیے single-row qfn پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں VSC8530XMW-03.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

VSC8530XMW-03 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Ethernet Controller, Embedded Router Network Port, Communications Gateway, Test and Measurement Instrument, Industrial Sensor Gateway, Network Appliance Management Port.

🏭

Industrial Ethernet Controller

The VSC8530XMW-03 fits a compact industrial controller that needs one copper Ethernet link and either an RGMII or RMII connection to its network processor. Its industrial-grade designation and documented -40°C to +125°C temperature range suit equipment operating across demanding ambient conditions. The 48-QFN, 6 mm x 6 mm package preserves board area compared with larger Ethernet PHYs, while IEEE 802.3az support can reduce link activity during light traffic. The implementation should include the manufacturer-recommended magnetics, supply filtering, reference circuitry, exposed-pad layout, and controlled-impedance routing between the PHY and host controller.

🌐

Embedded Router Network Port

A single VSC8530XMW-03 can provide the copper Ethernet physical layer for an embedded router, gateway, or network appliance. RGMII is useful when the host controller benefits from a wider parallel data path, while RMII can reduce interface pin demand on host devices with more constrained I/O. The PHY's Wake-on-LAN capability supports remote maintenance, and Energy Efficient Ethernet can reduce activity on lightly used links. Board planning should account for clock timing, impedance-controlled host traces, isolation requirements, magnetics, and the package exposed-pad thermal path.

📡

Communications Gateway

The VSC8530XMW-03 is appropriate for a communications gateway that exposes one copper Ethernet connection to a host processor. Its low-power, small-form-factor copper PHY design is useful in gateways constrained by enclosure size, and the RGMII/RMII choice lets the hardware designer balance throughput, host pin count, and layout complexity. Wake-on-LAN provides a useful path for remote equipment administration, while IEEE 802.3az assists power reduction during low-utilization periods. Validate thermal performance, copper-pair routing, magnetics layout, and host-interface timing at the system level.

🖥️

Test and Measurement Instrument

A VSC8530XMW-03 can add a single copper Ethernet management or communication port to a compact test instrument. The 6 mm x 6 mm package allows the PHY to be placed near the board edge and network magnetics, while RGMII or RMII can connect to the instrument's control processor. Wake-on-LAN may assist remote monitoring and service access, while Energy Efficient Ethernet can reduce consumption when the instrument is connected but not transferring continuous traffic. Keep the host clocking deterministic, route high-speed interfaces with controlled impedance, and provide a thermal path from the exposed pad.

🧩

Industrial Sensor Gateway

The VSC8530XMW-03 can supply a single wired Ethernet connection for an industrial sensor gateway that collects data from local sensors and forwards it to an upper-level network. Its industrial-grade positioning and broad operating-temperature range align with equipment intended for factory environments. The compact QFN package supports dense board layouts, while IEEE 802.3az reduces unnecessary link activity when traffic is intermittent. The gateway must still account for Ethernet magnetics, surge and isolation requirements, cable routing, thermal conditions, and the timing margins required by the selected RGMII or RMII host interface.

🔧

Network Appliance Management Port

The VSC8530XMW-03 can implement a dedicated management Ethernet port on a network appliance where the primary data path uses another interface. This allows technicians to retain access to configuration, diagnostics, and remote-management functions even when the appliance's main communication link is unavailable. The single-port PHY supports both RGMII and RMII, enabling adaptation to different controller resources, and its small 48-QFN package simplifies placement near an edge connector. Wake-on-LAN supports remote recovery workflows, while the physical implementation must preserve magnetics placement, isolation, thermal-pad soldering, and high-speed host signal integrity.

What is the VSC8530XMW-03?
The VSC8530XMW-03 is a single-port industrial-grade Fast Ethernet copper PHY from Microchip Technology. According to the manufacturer product page, it supports RGMII and RMII host interfaces, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, and a broad range of LVCMOS I/O levels. The device uses a 48-QFN package measuring 6 mm x 6 mm and is intended for space-constrained copper Ethernet equipment.
Where can I download the VSC8530XMW-03 datasheet PDF?
The official VSC8530XMW-03 documentation starts at the Microchip Technology VSC8530 product page at https://www.microchip.com/en-us/product/VSC8530. Use the datasheet and package links on that page to download the manufacturer PDF. The document should be checked against the -03 ordering code because other VSC8530 revisions provide different interface or feature configurations.
Where can I find the VSC8530XMW-03 pinout?
The VSC8530XMW-03 pinout is documented in the manufacturer datasheet for the VSC8530 family. The component uses a 48-QFN package, so its land pattern requires 48 numbered connections plus the package thermal-pad treatment shown by Microchip. Use the pin-description table and recommended footprint together when assigning power, ground, RGMII or RMII, clock, management, and copper-pair signals.
What interfaces does the VSC8530XMW-03 support?
The VSC8530XMW-03 supports both RGMII and RMII host interfaces. According to Microchip Technology, the device also provides IEEE 802.3az Energy Efficient Ethernet and Wake-on-LAN while supporting a wide selection of LVCMOS I/O levels. RGMII generally uses a wider parallel data path than RMII, so the correct interface mode should be selected before finalizing signal routing and firmware configuration.
What package does the VSC8530XMW-03 use?
The VSC8530XMW-03 uses a 48-QFN package measuring 6 mm x 6 mm. Manufacturer documentation describes the VSC8530-03 and VSC8531 variants in this small, single-row package family. The thermal pad and exposed-pad solder requirements must follow the Microchip recommended land pattern, particularly in compact industrial designs where heat dissipation and assembly yield are important.
Is the VSC8530XMW-03 suitable for industrial Ethernet equipment?
The VSC8530XMW-03 is suitable for industrial Ethernet equipment because it is identified as an industrial-grade single-port copper PHY. Its documented temperature range is -40°C to +125°C, and it supports the RGMII and RMII interfaces used by embedded communications equipment. Environmental qualification for a complete product still depends on the host controller, magnetics, power design, enclosure, and applicable system tests.
Does the VSC8530XMW-03 support Energy Efficient Ethernet?
The VSC8530XMW-03 supports IEEE 802.3az Energy Efficient Ethernet. According to the Microchip Technology VSC8530 product page, this capability complements its low-power single-port copper PHY design. Energy-efficient operation can reduce link activity when traffic is light, although actual system savings depend on host-controller behavior, link negotiation, firmware configuration, and the power required by the rest of the equipment.
Does the VSC8530XMW-03 support Wake-on-LAN?
The VSC8530XMW-03 supports Wake-on-LAN. The manufacturer describes Wake-on-LAN as one of the key capabilities of the VSC8530 family, allowing a compatible system to activate or respond when suitable network activity is detected. Its implementation still requires compatible host software, interface configuration, and network infrastructure that preserves the required low-power behavior.
VSC8530XMW-03 vs VSC8530XMW-05: which is the better replacement candidate?
The VSC8530XMW-05 is the closer documented same-family candidate because both are listed in the 48-QFN, 6 mm x 6 mm package and belong to the VSC8530 series. However, the suffix identifies different device revisions, so footprint similarity alone does not prove that every electrical function or configuration is identical. Review the manufacturer ordering table and pin descriptions before approving it as a replacement.
When should I choose the VSC8530XMW-03 over VSC8530XMW-04?
Choose the VSC8530XMW-03 only when its -03 configuration matches the required Ethernet PHY features, host interface, and firmware expectations. The VSC8530-04 family is documented in a 6 mm x 6 mm single-row QFN package, making it a relevant selection candidate, but the -03 and -04 suffixes indicate separate configurations. Confirm pin-level functions, supported clocking modes, interface features, and lifecycle requirements in the manufacturer documentation.
Is the VSC8530XMW-03 suitable for a single-port embedded Ethernet design?
The VSC8530XMW-03 is suitable for a compact single-port embedded Ethernet design when one copper link is sufficient. It provides RGMII or RMII connectivity, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, and broad LVCMOS I/O support in a 48-QFN package. The design must also provide the required network magnetics, termination, clocking, power rails, reference circuitry, and controlled-impedance routing described by Microchip.
What is the best drop-in replacement for VSC8530XMW-03?
The best drop-in replacement must use the same 48-QFN footprint and preserve the RGMII or RMII pin functions, clocking, management interface, copper PHY behavior, and electrical limits. VSC8530XMW-04 and VSC8530XMW-05 are documented same-family candidates, but no candidate can be approved solely from the suffix or package name. Use the Microchip ordering information and compare every assigned pin before selecting a replacement.
Can another manufacturer replace the VSC8530XMW-03 directly?
A cross-manufacturer replacement cannot be identified as a true drop-in from the available documentation because no competitor MPN has been confirmed to match all 48 pins and electrical functions. A device with a similar Ethernet feature set is not necessarily interchangeable if its RGMII or RMII mapping, supply requirements, clocking, management interface, package thermal pad, or exposed pad differs. Validate the complete footprint and electrical interface before substitution.
Where can I buy the VSC8530XMW-03 and check its lead time?
Use the Request a Quote form on this page to request the VSC8530XMW-03, current lead time, minimum order quantity, and available packaging options. The part is identified as discontinued, so availability and sourcing conditions may vary. The manufacturer product page remains the authoritative source for product status, documentation, and any approved successor information.
What are the key specifications engineers should know about VSC8530XMW-03?
The key VSC8530XMW-03 specifications are its single-port copper PHY function, RGMII and RMII host interfaces, IEEE 802.3az support, Wake-on-LAN, broad LVCMOS I/O compatibility, and 48-QFN 6 mm x 6 mm packaging. Microchip also identifies it as an industrial-grade device, while distributor technical information lists an operating range of -40°C to +125°C. Supply voltage, power consumption, and exact link-rate limits should be taken from the manufacturer datasheet.

کے لیے انجینئرنگ ریفرنس ڈیٹا VSC8530XMW-03 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Select the VSC8530XMW-03 when an existing design specifically calls for the -03 revision of the VSC8530 family and requires a single copper Ethernet PHY with RGMII or RMII, IEEE 802.3az Energy Efficient Ethernet, and Wake-on-LAN in a 48-QFN package. The same footprint makes VSC8530XMW-04 and VSC8530XMW-05 relevant candidates for redesign or last-time-buy evaluation, but their suffix-specific revisions must be checked for functional, pin, clocking, and firmware differences before substitution. No cross-manufacturer part is established here as a true drop-in replacement because an Ethernet PHY with similar advertised features can still differ in pin mapping, reference voltage, power architecture, interface timing, or package-pad connections. For new mass-production designs, compare the manufacturer's current products before committing to an end-of-life PHY. For repair and continuity projects, preserve the existing -03 footprint and validate every schematic and PCB connection against the manufacturer pin table.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ VSC8530XMW-04 VSC8530XMW-05
Brand Microchip Technology Microchip Technology Microchip Technology
Package 48-QFN (6x6 mm) 48-QFN (6x6 mm) 48-QFN (6x6 mm)
Device Type Single-port copper Ethernet PHY VSC8530 copper Ethernet PHY Single-port copper Ethernet PHY
Ethernet Port Count 1 port 1 port 1 port

اہم امتیازی خصوصیات

  • Compact single-port copper PHY integration (بمقابلہVSC8530XMW-05)
  • Industrial copper networking in a small footprint (بمقابلہVSC8530XMW-04)
  • Both host-interface options on one PHY (بمقابلہVSC8530XMW-05)

ڈیزائن نوٹس

Place the PHY close to the Ethernet magnetics and physical-layer isolation network to minimize copper-pair trace length and susceptibility to EMI. Keep the RGMII or RMII host interface free of unnecessary stubs, use the recommended solid reference plane, and route clocks with short symmetric paths. The exposed thermal pad must use the manufacturer land pattern and a thermal-via strategy compatible with the assembly process.

Select RGMII or RMII before schematic capture and preserve the associated clock, enable, and data-direction functions required by the chosen host controller. Review every pin against the -03 datasheet rather than assuming that another VSC8530 suffix has identical connections. Maintain the required input and output capacitance values because timing margin depends on host edge rate, board delay, and the physical interface selected.

Use the supply rails, decoupling network, and reference requirements specified by Microchip for the -03 configuration. Place required ceramic capacitors adjacent to their assigned power pins with short current paths and low loop area. Confirm startup sequencing, power-supply tolerance, and analog-signal grounding against the manufacturer schematic so the PHY operates correctly across input-voltage and temperature conditions.

Treat RGMII as a source-synchronous high-speed interface and RMII as a clock-referenced parallel interface with its own edge-rate requirements. Use the datasheet-recommended terminations, provide a continuous reference plane, avoid split planes beneath the PHY, and verify the exposed-pad connection through the full stack-up. Perform post-layout timing and return-path checks before fabrication.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

A distributor technical listing identifies the VSC8530XMW-03 as RoHS3 compliant. No REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated in the available information.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

VSC8530XMW-03 datasheet VSC8530XMW-03 datasheet pdf VSC8530XMW-03 pinout VSC8530XMW-03 footprint VSC8530XMW-03 equivalent VSC8530XMW-03 replacement VSC8530XMW-03 vs VSC8530XMW-05 VSC8530XMW-03 RGMII RMII VSC8530XMW-03 IEEE 802.3az VSC8530XMW-03 price VSC8530XMW-03 stock Microchip VSC8530XMW-03

متعلقہ اجزاء اور اصطلاحات

Microchip Technology VSC8530XMW-03 VSC8530XMW-04 VSC8530XMW-05 VSC8530 VSC85xx Ethernet PHY copper PHY Fast Ethernet physical-layer transceiver RGMII RMII IEEE 802.3az Energy Efficient Ethernet Wake-on-LAN LVCMOS 48-QFN QFN family surface-mount package industrial Ethernet embedded networking Ethernet magnetics exposed pad RoHS
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں